The following Flip Catalog has been brought to you  courtesy of Specialtytools.com. Our hopes are to  bring you the most comprehensive information we  can so you can make an informed decision regard- ing purchases. Not all of the items in this series of catalogs are  stocked, some are special order and require lead  times. We hope that when it come time to make a  purchase you will offer us the opportunity to quote  you on the items. Please call our offi ce with any questions you may  have regarding these items. 1 800 669 5519       2   TABLE OF CONTENTSTABLE OF CONTENTS   IntroductionIntroduction   General Product Information............................................4 Dynabrade Distribution ................................................5 Safety Comes First ....................................................5 Guide To Catalog Symbols..............................................6 Conversion Tables......................................................6   Wet SandersWet Sanders   Wet Dynorbital® Supreme ............................................76 Right Angle Wet Sander ..............................................78 Wet Dynafine® ........................................................79 Wet Dynabug® “Model T” ............................................80   Abrasive Belt ToolsAbrasive Belt Tools   Dynafile® ..............................................................8 Dynafile® II ..........................................................11 .4 hp Dynafile® II ......................................................12 Vacuum Dynafile® II ..................................................13 Electric Dynafile® II ..................................................13 Mini-Dynafile® II......................................................16 Dynafile® III..........................................................18 Dynabelter® ..........................................................22 Dynangle ............................................................25 Dynangle II ..........................................................26 “Take-About” Sander ................................................27   Abrasive Finishing ToolsAbrasive Finishing Tools   Dynastraight® ........................................................29 Lightweight Dynastraight® ............................................34 Dynastraight® Flapper ................................................35 Lightweight Dynastraight® Plus........................................35 DynaRover............................................................36 Rolling Pin Sander ....................................................37 Mini-Dynisher ........................................................37 Dynisher ............................................................38 Electric Dynisher......................................................39 Dyninger ............................................................40 Lightweight Dyninger ................................................41 Industrial DynaZip ....................................................43   Random Orbital SandersRandom Orbital Sanders   Dynorbital-Spirit® ....................................................46 HiVac Dynorbital-Spirit® ..............................................48 Mesh Abrasive Systems ..............................................49 Dynorbital® Supreme..................................................50 Two-Hand Dynorbital® ................................................52 11" Dia. Dynorbital® ..................................................53 Palm-Style Mini-Orbital ..............................................54 7° Offset Mini-Orbital ................................................55 Angle-Head Mini-Dynorbital® ..........................................56 Right Angle Mini-Orbital ..............................................57 Electric Dynorbital® ..................................................58   Gear-Driven & Finishing Sanders (Cont’d.) Gear-Driven & Finishing Sanders (Cont’d.)   Dynabug® Sander ....................................................69 Dynabug® IISander ..................................................70 Dynabug® IIMesh Abrasive System....................................72 11" Long File Board Sander ..........................................72 Dynaline Sander ......................................................73 Right Angle Mini-Orbital ..............................................74   Gear-Driven & Finishing SandersGear-Driven & Finishing Sanders   DynaLocke® ..........................................................61 Gear-Driven Sanders..................................................62 11" Dia. Gear-Driven Sanders ........................................63 Dynafine® Detail Sander ..............................................64 Dynafine® Finger Sander ..............................................64 Dynafine® “Backsplash” Sander ......................................65 Dynafine® Raised Panel Sander........................................66 Dynabug® “Model T” Sander ..........................................67   Buffers & PolishersBuffers & Polishers   Dynabuffer ..........................................................82 “Two-Step” Repair System............................................83 3" Dia. Buffers ......................................................84 5"- 8" Buffers ........................................................87 6"- 8" Buffers ........................................................88 Straight-Line Buffer ..................................................89 Electric Buffer ........................................................89 Random Orbital Polishers / Head Kit....................................90   Die GrindersDie Grinders   Pencil Grinders ......................................................92 0.33 hp, 0.4 hp Die Grinders ..........................................95 0.4 hp Die Grinders ..................................................96 0.5 hp Die Grinders..................................................101 0.55 hp Die Grinder ................................................104 0.7 hp Die Grinders..................................................105 1.0 hp Die Grinders..................................................107   Disc SandersDisc Sanders   2" Dia. Disc Sanders ................................................111 3" Dia. Disc Sanders ................................................113 4" Dia. Disc Sanders ................................................114 4-1/2" - 5" Dia. Disc Sanders........................................115 7" Dia. Disc Sanders ................................................118   GrindersGrinders   Depressed Center Wheel Grinders....................................120 Type 1 Wheel Grinders ..............................................125 Cone / Plug Wheel Grinders ..........................................126 Cut-Off Wheel Tools ................................................127 Vacuum Cut-Off Wheel Tools ........................................129   Drills & Specialty ToolsDrills & Specialty Tools   Drills................................................................131 Stockade Filer ......................................................135 Stockade Sander and Saw ..........................................136 Dynadie® III ........................................................137 Router..............................................................137 Dynascaler..........................................................138     3   TABLE OF CONTENTSTABLE OF CONTENTS   Stationary MachinesStationary Machines   Versatility Grinders ..................................................140 Tool Post Grinders ..................................................146 Bandsaw Blade Grinder..............................................148 Wet Deburring Station ..............................................149   Dust Collection SystemsDust Collection Systems   Portable Vacuum Systems ..........................................151 Portable Vacuum Accessories ........................................152 Hose Cuffs..........................................................154 Exhaust Hoses, Swivel Adapters, Conversion Kits......................155 Dust Collection Receptacles, Self-Contained Systems ................156 Overskirt Shrouds, Exhaust Hoses, Air Lines ..........................157 Downdraft Tables....................................................158   Dynabrade Red ToolsDynabrade Red Tools   DynaZip Air Tool ....................................................234 Auto File II..........................................................235 Disc Sanders........................................................235 Die Grinders ........................................................236 Cut-Off Wheel Tools ................................................237 Impact Wrench......................................................237 Buffers..............................................................238   Product & Safety InformationProduct & Safety Information   Safety Comes First ..................................................225 Safety Guidelines....................................................226 Recommended Air System ..........................................227 Selecting a Compressor ............................................228 Maintaining Adequate Air Flow ......................................229 Healthy Work Environment ..........................................230   Numerical Index of Tools .................................... 231   AccessoriesAccessories   Air Supply Accessories ..............................................160 Arbors..............................................................186 Carbide Burrs and Carbide Burr Kits ..................................189 Collets and Inserts ..................................................190 Contact Wheels and Assemblies......................................196 Couplers, Coupler/Plug Assemblies ..................................161 Disc Pads, Misc. ....................................................178 Disc Sanding Pads & Assemblies ....................................181 Drop-In Motors......................................................190 Dynabug® “Model T” & Wet Dynabug® Pads ..........................175 Dynabug® IISanding Pads ..........................................176 Dynacushion® Pneumatic Wheels ....................................183 Dynafine® & Dynafine® Backsplash Pads  ............................173 Dynaflex Expander Wheels ..........................................185 DynaJet, Filter-Regulator-Lubricator..................................162 Dynaline Sanding Pads, Flat & Contoured ............................177 DynaMitt Sanding Glove ............................................207 Dynamount Bench Mount............................................206 Dynaswivel® Air Line Connector ......................................163 DynaWheel Pneumatic Wheels ......................................182 DynaZip Wheels, Hubs, Assemblies ..................................185 Dynū ba, Lubricants and Grease ......................................205 File Board & Dynabug ® Sanding Pads ................................174 Finesse Creme and Glaze............................................206 Gear-Driven Sanding Pads, Hook-Face................................172 Gear-Driven Sanding Pads, Vinyl & Rubber............................171 Hanger for Right Angle Mini-Orbital Sander ..........................180 Hanging Brackets, Tool Top Handle ..................................207 Interface Pads ......................................................170 Leveling Jacks ......................................................195 Mandrels, Chucks, Mounting Hardware ..............................187 Mini-Dynorbital® Sanding Heads & Pads ..............................180 Motor Tune-Up Kits..................................................192 Polishing Pads, Hook-Face ..........................................179 Portable Wet Tank Assembly ........................................206 Random Orbital Head Kit ............................................179 Random Orbital Pads, Loop-Face & Rubber ..........................168 Random Orbital Sanding Pads, Hook-Face ............................167 Random Orbital Sanding Pads, Misc. ................................164 Random Orbital Sanding Pads, Vinyl ..................................166 Safety-Lock Levers..................................................207   Accessories (Cont’d.) Accessories (Cont’d.)   Sanding Pad Conversions............................................169 Sanding Pads, Gear-Driven & Random Orbital ........................169 Side Handles........................................................207 Threaded Adapters ..................................................188 Wet Dynafine® Sanding Pads ........................................172 Wheel Accessories & Slotted Wheels ................................184   AbrasivesAbrasives   Bands, Coated Abrasive..............................................214 Bands, Non-Woven Nylon  ..........................................214 Belts, Cloth Polishing ................................................213 Belts, Coated Abrasive  ..............................................209 Belts, Non-Woven Nylon  ............................................212 Discs, 3M™ Clean ’n Strip™ ..........................................218 Discs, Coated Abrasive ..............................................216 Discs, Non-Woven Nylon ............................................215 Discs, Scalloped-Edge ..............................................215 Discs, Scotch-Brite™ Bristle..........................................218 Files, Reciprocating  ................................................223 Flaps, Hub for Dynascaler............................................221 Rolls, Coated Abrasive ..............................................221 Sanding Stars, Coated Abrasive ......................................219 Saw Blades, Reciprocating  ..........................................223 Sheets, Coated Abrasive ............................................220 Sheets, for DynaMitt ................................................221 Sheets, Non-Woven Nylon ..........................................221 Strips, Coated Abrasive ..............................................220 Wheels, 3M™ Green Corps™ Cut-Off ..................................222 Wheels, Coated Abrasive Flap  ......................................219 Wheels, Depressed Center  ..........................................222 Wheels, Diamond Cut-Off............................................222 Wheels, Non-Woven Nylon ..........................................218     4   INTRODUCTIONINTRODUCTION   Product Line  Founded in 1969, Dynabrade has earned a reputation and position of continued leadership in the innovative design and manufacturing of unique portable abrasive power tools. Dynabrade tools grind, deburr, file, sand and polish to meet the needs of many industries for work with metals, wood, plastics, glass, rubber, stone, fiberglass, composites and much more.   Continuous Quality Control  Every Dynabrade product undergoes rigorous performance tests at precise stages, from design conception through product assembly and packaging, to insure they meet our own high standards and the demands of our customers. Our goal is to maintain or improve Dynabrade quality with product and service performance levels that equal or exceed that of any competitor, and to exceed customers’ expectations worldwide.    Continued Leadership in Research and Development  Many industrial applications have unique requirements that  cannot be met with our general line of air tools. Our research  and development teams are continually upgrading our product  offering based on market needs and new technology, coupled with the  latest innovations and technological advancements in the abrasive industry. We make ongoing investments in plant, equipment and manufacturing processes to improve the quality of our products. Our goals are to solve abrasive user problems, increase productivity and lower total costs. Our constantly growing product line, together with many years of design engineering, research and development experience, proves our ability and commitment to provide continued leadership in the portable abrasive power tool industry.   One Year Warranty on Tools  Following the reasonable assumption that any inherent defect, which might prevail in a product, will become apparent to the user within one year from the date of purchase, all equipment of our manufacture is warranted against defects in workmanship and materials under normal use and service. We shall repair or replace at our factory, any equipment or part thereof that shall, within one year after delivery to the original purchaser, indicate upon our examination to have been defective. Our obligation is contingent upon proper use of Dynabrade tools in accordance with factory recommendations, instructions and safety practices. It shall not apply to equipment, which has been subject to misuse, negligence, accident or tampering in any way so as to affect its normal performance. Normally wearable parts such as bearings, contact wheels, rotor blades, etc., are not covered under this warranty.   Two Year Warranty on Portable Vacuums  Two years from date of purchase, all Portable Vacuums of our manufacture are warranted against defects in workmanship and materials under normal use and service. Our obligation is contingent upon proper use of Dynabrade Vacuums in accordance with factory recommendations, instructions and safety practices. It shall not apply to equipment which has been subject to accident, negligence or misuse, such as using incorrect filters. It shall also not apply to equipment that has been tampered with in any way so as to affect its normal performance. Normally wearable parts such as Electrical Motor Brushes, Hoses, Wheels, etc. are not covered under this warranty (See page 151.)    Repairs  To maximize the long-term value of your Dynabrade products, have them repaired by our factory experts. We have a fully trained staff to meet all your service needs. By relying on Dynabrade for service, you can be confident that your tool will continue to operate at peak levels of performance. For those who have their own in-house repair facilities, ask your local Dynabrade Distributor about our tune-up kits available for selected models or place your order for specific parts as needed directly with your Dynabrade distributor.   Flat Rate Repair  Flat rate repair offers a reliable way to keep your tools at peak performance at a known cost. It includes labor and all necessary parts needed to restore the tool to approved factory performance levels. Dynabrade will only repair standard items that were returned with the tool (i.e. if accessories such as contact arms, pads, etc. are missing from the tool or damaged, they will not be replaced). We may determine, based on our examination, that a product is beyond economical repair.    Motor Tune-Up Kits  The regular maintenance of any air tool will contribute to greater efficiency of the tool and will prolong tool life. Motor Tune-Up Kits contain replacement parts which are most susceptible to wear. Each Dynabrade tool is complimented by a specific Motor Tune-Up Kit which you will find referenced throughout the catalog. See the Accessories section for a complete listing.   Drop-In Motors  Drop-in Motors  provide a convenient, dependable way to repair your tools in-house.   Industrial Air Tool Maintenance  Dynabrade has designed a booklet to promote and assist with proper air tool maintenance. Please order our “Industrial Air Tool Maintenance Guide,” no. D03.10.   Dynabrade Trademarks  Trademarks and service marks used in this catalog are the property of Dynabrade, Inc. Dynabrade, “D” logo are registered tradem arks of Dynabrade, Inc. Other registered marks include: Dynafile ®, Dynabelter®, Dynadie®, Dynastraight®, Dynapad®, Dynaswivel®, Dynorbital®, Dynorbital-Spirit®  , Dynacushion®, Dynabug®, Dynafine®, DynaLocke®. Use of these marks is strictly prohibited without prior written consent of Dynabrade, Inc.   MISSION STATEMENT MISSION STATEMENT  To exceed the expectations of our customers through the innovative design of the highest quality abrasive power tools and related accessories.   General Product Information Discover The Dynabrade Difference!     5   INTRODUCTIONINTRODUCTION  Safety Comes First See Additional Safety Information on Page 224 Dynabrade Distribution Service and Support for Customers Around the World  Safe Operation  Understanding the proper use and safe procedures involved with using power tools is our primary concern. Accidental injury or death can be prevented and/or reduced by reading and understanding the following:  • Safety Code for Portable Air Tools (B186.1), American National Standards Institute (ANSI).  • Safety Requirements for Use, Care and Protection of Abrasive Wheels (B7.1), American National Standards Institute (ANSI).  • Hand Held Non-Electric Power Tools (EN 792), European Committee for Standards (EN).  • General Industry Safety & Health Regulations (CFR 29 Part 1910), Occupational Safety and Health Administration (OSHA).  • Applicable State and Local Regulations (regulations may vary).   Users are responsible for following all established safety codes and regulations.   Safety Legend  Carefully Read All Instructions Before Operating or  Servicing Any Dynabrade Abrasive Power Tools  Always operate, inspect and maintain tools in accordance with all safety codes and regulations for the protection of operating personnel as well as adjacent areas. All products offered by Dynabrade are not to be modified, converted or otherwise altered from the original design without the expressed written consent from Dynabrade, Inc. Use only genuine Dynabrade® replacement parts and accessories made especially for the tool in use. The use of any other manufacturers’ replacement parts and accessories could create a hazard. Read and understand tool manual before use to  reduce risk of injury to operator, visitors, and tool. Eye protection must be worn at all times, eye protection to conform to ANSI Z87.1. Respiratory protection to be used when exposed to contaminants that exceed the applicable threshold limit values required by law. General warning. Caution, risk of danger. Practice safety requirements. Work alert, have proper attire, and do not operate tools under the influence of alcohol or drugs. Ear protection to be worn when exposure to sound, exceeds the limits of applicable Federal, State or local statues, ordinances and/or regulations. Air line hazard, pressurized supply lines and flexible hoses can cause serious injury. Do not use damaged, frayed or deteriorated air hoses and fittings.   For More Information, Prices or an In-Plant Demonstration Contact Your Local Dynabrade Distributor or Call/Fax our Consumer Information Numbers:   DYNABRADE, INC.  8989 Sheridan Drive   • Clarence, New York  14031-1490 Phone: (716) 631-0100  • Fax: 716-631-2073  US Consumers Call Toll Free: 1-800-828-7333   DYNABRADE INTERNATIONAL  8989 Sheridan Drive   • Clarence, New York  14031-1490 Phone: (716) 631-0100  • Fax: 716-631-2524  Canadian Consumers Call Toll Free: 1-800-344-1488   DYNABRADE EUROPE S.à r.l.  Zone Artisanale   • L-5485 Wormeldange—Haut, Luxembourg Telephone: +352 76 84 94 1   • Fax: +352 76 84 95   DYNABRADE DO BRASIL  Rua Oneda, 632  •  Sao Bernardo do Campo   SP - CEP 09895-280 Phone 55-11-4390-0133  •  Fax 55-11-4399-1067   Or Post your Inquiry on Dynabrade’s Website at:  www.dynabrade.com   Network of Authorized Dynabrade Distributors  We have been supplying high quality tools to customers through a worldwide network of professional distributors who are capable of meeting the specific needs of the industrial marketplace. Our distributors have extensive knowledge of Dynabrade’s complete  line of power tools and related accessories. Their goal is to improve customer’s competitiveness by minimizing costs through a continuous improvement process.   FREE Demonstration Policy  We can arrange a no-obligation demonstration in your facility on most of our products. It is a sure way to see that the product is best suited to your application and to see the time, labor and cost-saving advantages of Dynabrade products. Contact your local Dynabrade distributor to arrange an in-plant demonstration. To contact your local Dynabrade distributor, call our customer service department, or visit our distributor locator on our web site: www.dynabrade.com.   Customer Service  Dynabrade’s customer service staff has just one very important job – to make sure that you are completely satisfied with your order and service. Our Customer Service Department is staffed with highly trained people, ready to serve you in any way they can, from order- taking to technical service to rush shipments! To more efficiently serve the international marketplace, our Luxembourg office can communicate in 14 languages. In short, our commitment to customer service is to satisfy our customers by serving them well. If we can help or improve in any way, we'd like to hear from you.     6   INTRODUCTIONINTRODUCTION  Guide to Catalog Symbols Explanations of Helpful Symbols Used Throughout Catalog   Measurement Conversions Conversions to International Measurements   Abrasive Capacity  In the upper right corner of every tool section, this box identifies the abrasive type compatible with the designated tools. Abrasive dimensions are expressed in inches and millimeters.   Gearless Tool  This symbol identifies a Dynabrade tool that operates with no gears. Gearless tools have fewer wearable parts, which translates to reduced maintenance and less downtime. For more information, see page 94.   Tech Tip  The glowing Dynabrade light bulb alerts you to a proven suggestion for operating a tool at peak efficiency. Tech Tips have been compiled through actual workplace experiences.   Tool Motion  Dynabrade finishing tools move in a variety of patterns to suit virtually every finishing application. Motion symbols are shown to illustrate the action produced by a specific tool.   Portable Dust Collection System  Dynabrade Self-Generated Vacuum Tools collect dust and debris through the tool’s exhaust, eliminating the need for an external vacuum source. These tools require the use of a portable dust collection system (sold separately), as indicated by this photo. For all optional dust collection systems, see page 156.    “FastTrack”  At the bottom of every tool page, the “FastTrack” is a handy reference guide to all related accessories. This is your quickest way to find the proper contact arms, sanding pads, abrasives and more!   Common Rectangular Pad Sizes - Width x Length  Inches Millimeters 4" x 4-5/16" 102 mm x 110 mm 4-1/4" x 4-1/2" 108 mm x 114 mm 2-3/4" x 8" 70 mm x 203 mm 2-3/4" x 11" 70 mm x 278 mm 3-2/3" x 7" 93 mm x 178 mm 2-7/8" x 3-1/8" 73 mm x 79 mm 2-3/8" x 3-3/4" 60 mm x 95 mm   Inches Millimeters 3/32" 2.5 mm 1/8" 3 mm 3/16" 5 mm 1/4" 6 mm 3/8" 10 mm 1/2" 13 mm 3/4" 19 mm 1" 25 mm 1-1/4" 32 mm 2" 51 mm 2-3/4" 70 mm 3" 76 mm 3-1/2" 89 mm 4" 102 mm   Inches Millimeters 4-1/2" 114 mm 5" 127 mm 6" 152 mm 7" 178 mm 8" 203 mm 9" 229 mm 11" 279 mm 12" 305 mm 18" 457 mm 20-1/2" 521 mm 24" 610 mm 30" 762 mm 34" 864 mm 44" 1,118 mm   Conversion Factors  Length Meters Centimeters Millimeters 1 Inch (in.) 0.0254 m 2.54 cm 25.4 mm 1 Foot (ft.) 0.3048 m 30.48 cm 304.8 mm Weight Kilograms Grams 1 Ounce (oz.) 0.02835 kg 28.35 g 1 Pound (lb.) 0.454 kg 454 g Volume Liters Power Kilowatts Watts 1 US Gallon 3.785 l 1 hp 0.746 kW 746 W Torque Newton Meters Air Pressure Bar 1 Ounceinch 0.00706 Nm 90 Pounds per 6.2 Bar 1 Poundinch 0.11298 Nm Square Inch (PSI) Abrasive Sound Level Speed SMPM Expressed in dB(A). This is 1 Surface Foot .3048 Surface the pressure measurement per Minute Meters per according to method outlined (SFPM) Minute (SMPM) in ISO regulation ISO-15744. Air Flow Rate LPM 1 Standard 28.32 Liters Cubic Foot per Minute per Minute (LPM) (SCFM)   NOTE: Dynabrade expresses air flow rate in SCFM/LPM only. To determine how many tools a compressor will run, compare the SCFM of tool with capacity of compressor’s inlet (free air) CFM rating.   ABRASIVE DISCS   3-1/2" (89 mm), 5" (127 mm) and 6" (152 mm) diameter   Common Dimensions (Approximate)     Dynafile®.................................................. 8 Dynafile® II.............................................. 11 .4 hp Dynafile® II ...................................... 12 Vacuum Dynafile® II .................................. 13 Electric Dynafile® II.................................... 13 Mini-Dynafile® II ........................................ 16   Dynafile® III ............................................ 18 Dynabelter® ............................................ 22 Dynangle ................................................ 25 Dynangle II .............................................. 26 “Take-About” Sander.................................. 27     8 “The Original” Dynafile ®   Air-Powered Abrasive Belt Tool   The Best Tracking Abrasive Belt Tool in the World!   ABRASIVE BELT TOOLS   Model 14000  For 24" Long Belts  • World-famous Dynafile® replaces tedious hand filing and  sanding. Grind, deburr, blend, polish, finish and more!  • Grind from contact wheel or platen pad. Finish and polish using slack of belt.  • For use on metal, plastic, fiberglass, composites, rubber, glass and stone.  • Tool includes 11218 Contact Arm for  standard use. Also accepts a variety of  additional Contact Arms (see page 9).  • Motor easily adjusts to the most comfortable throttle lever position.  • Superior belt tracking permits use of 1/8", 1/4" or 1/2" wide x 24" long abrasive belts.   • Work in areas as small as 3/8" diameter.  • Lightweight composite belt guard allows quick and easy belt change!  • Hard and soft platen pads mount onto contact arms for heavy grinding or contour polishing (see page 27).  Reach into areas as small as 3/8". Efficiently rework turbine blades with specialized contact arm.   Clean and finish using non-woven nylon belts.  The most recognized shape in portable abrasive belt tools! Grind welds using belts as narrow as 1/8" wide.   ABRASIVE BELT TOOLS   ABRASIVE BELTS  1/8", 1/4", 1/2" wide x 24" long  (3 mm, 6 mm, 13 mm x 610 mm)   Contact Arms: Page 9  • Abrasive Belts: Page 210  • Accessories: Page 159   Model Motor Motor Sound Abrasive Belt Size Maximum Air Flow Max. SFPM  Air Inlet Weight Length Height Number hp (W) RPM Level Inch (mm) SCFM (LPM) (SMPM) Thread Pound (kg) Inch (mm) Inch (mm)  14000 .5 (373) 20,000 77 dB(A) 1/8-1/2 (3-13) W x 24 (610) L 31 (878) 5,800 (1,762) 1/4" NPT 3.1 (1.4) 14.6 (371) 4.6 (116) Additional Specifications: Air Pressure 90 PSIG (6.2 Bar)   • Hose I.D. Size 1/4" (6 mm)  Tune-Up Kit: No. 95600 (page 192)  • Recommended Air Line Accessory: 95676 Coupler/Plug Assembly (page 161)   14010 Versatility Kit  • Includes 14000 Dynafile® with five popular Contact Arms, plus an assortment of abrasive belts, in durable case.  • Includes Contact Arms 11213, 11216, 11218, 11219 and 11231 (see page 9).  • This kit is USA Government National Stock Number 5130011263260.   Model 14000 Model 14010   Arrows located on Dynafile  ® belt cover indicate abrasive belt direction. Grinding from the RETURN SIDE of the belt will greatly enhance tool performance and increase belt life.   Dynaswivel ® air line connector is ideal for use with most air tools. The Dynaswivel  ®  improves tool maneuverability, minimizes operator fatigue and extends hose life. (See page 163.)     9   ABRASIVE BELT TOOLSABRASIVE BELT TOOLS  Dynafile ® Contact Arms 4" to 14" Workable Reach  To maximize the life of 1/4" bearings or smaller, lower the operating air pressure to 45 PSIG (3.1 Bar) and run the motor at a lower RPM. 11178, 11179, 11257 • Up to 32" reach  11178: 11178: None • Enter slots as narrow  1/2" x 34" 11068 Wheel as 3/8" (9" reach with (5/16" dia. steel) • Deburr 1/2" to 1" 5/16" dia. steel tubing contact wheel) 11179: 11179: 1/2" x 34" 11078 Wheel (9" reach with (5/8" dia. rubber) 5/8" dia. rubber 11257: Custom-made. Specify length and contact wheel. contact wheel) 11212 • 45 PSIG maximum 1/4" x 24" 11066 11034 • File round openings as   5/16" dia. x 1/8" wide, steel 1/4" wide small as 7/16"  11213 • 45 PSIG maximum 1/2" x 24" 11068 11027 • See 11239 for  5/16" dia. x 3/8" wide, steel 1/2" wide heavy-duty version 11214 • 45 PSIG maximum 1/2" x 24"  11070 11025 • Work on contact wheel  7/16" dia. x 3/8" wide, rubber  1/2" wide or platen pad 11215 • Enter 1/2" x 1/2"  1/4" x 24" 11072 11034 openings  7/16" dia. x 1/8" wide, brass 1/4" wide 11216 • Enter 5/16" x 3/4"  1/4" x 24" 11074 11032 openings 5/8" dia. x 1/8" wide, rubber 1/4" wide 11217 • Enter channels as  1/2" x 24" 11076 11027 narrow as 9/16" 7/16" dia. x 3/8" wide, steel  1/2" wide 11218 • Standard arm on  1/2" x 24" 11078 11025 Model 14000 5/8" dia. x 3/8" wide, rubber  1/2" wide • See 11228 for  heavy-duty version 11219 • No platen due to  1/4" or  11080 None offset design 2" x 24" 1" dia. x  3/8" wide, • Ideal for slack  radiused rubber polishing; also grinding radiuses 11228 • Heavy-duty steel 1/2" x 24" 11078 11025 • Optional 11028  5/8" dia. x 3/8" wide, rubber 1/2" wide Steel Platen available  for grinding 11231 • See 11243 for  1/2" x 24" 11084 11135 heavy-duty version 3/4" dia. x 1/2" wide, rubber 1/2" wide 11232 • For 1/8" wide belts 1/8" or 1/4"  11086 None “V” Shaped Wheel • No platen due to  x 24" 1" dia. x 3/8" wide, tapered offset design urethane • Grind corners,  strap polish   Part Number Comments Belt Size Contact Wheel Assembly  Platen Pad (W x L) (includes bearing and shaft)     10   ABRASIVE BELT TOOLSABRASIVE BELT TOOLS  Dynafile ® Contact Arms 4" to 14" Workable Reach   11234 • Deburrs both edges of   1/2" x 34" 11080 (two) None  workpiece simultaneously 1" dia. x 3/8" wide, rubber • Contact wheels adjust  for material 1/8" to  5/8" thick 11237, 11238 • 45 PSIG maximum 11237: 11237: 5/16" dia. x 1/8"  None Turbine Blade Arm • Grind, blend and  1/4" x 24" wide, steel wheel  polish turbine blades • Reach areas as small as  11238: 11238: 1/4" dia. x 3/8" wide,  5/16" wide 1/2" x 24" steel (Consists of three 11051 • 1-1/2" strap polish area Bearings) 11239 • 45 PSIG maximum 1/2" x 24" 11068 11027 • Heavy-duty steel 5/16" dia. x 3/8" wide, steel  1/2" wide • Grind in narrow areas 11240 • 9" workable reach 1/2" x 34"  11078 11025 5/8" dia. x 3/8" wide, rubber 1/2" wide 11241 • 9" workable reach 1/4" x 34" 11074 11032 5/8" dia. x 1/8" wide, rubber 1/4" wide 11243 • Heavy-duty steel 1/2" x 24" 11084 11135 • Grind over contact  3/4" dia. x 1/2" wide, rubber 1/2" wide wheel or platen pad 11244, 11245 • 14" workable reach 11244: 11078 11025 1/2" x 44" 5/8" dia. x 3/8" wide, rubber 1/2" wide 11245: 1/4" x 44" 11253, 11254 • Grinds and polishes 1/4" to 1/2" 1/4" to 1/2" wide wheels, Big Wheel Arm deep slots or narrow x 34" 2-1/8" to 4-3/4" diameter grooves (specify size) 11255 • I.D. polish, deburr or  1/2" x 34"  11078 None Cross Bow Arm ream with one 180°  5/8" dia. x 3/8" wide, rubber wrist turn • Deburr leading radius of 1" to 4" round openings • Great for pipe fitters  11258 • Blend stainless steel 1/2" x 24" 11078 11025 Stroke Sander Arm 5/8" dia. x 3/8" wide, rubber  1/2" wide 11076 7/16” dia. x 3/8” wide, steel  11261 • For in-line scratch  1/2" x 24" 11078 11132 “The Banana Arm” pattern 5/8" dia. x 3/8" wide, rubber  1/2" wide 11262 • For flat grinding using  1/2" x 24" 11078  11026 Offset Arm platen at or near   5/8" dia. x 3/8" wide, rubber  1/2" wide corners and edges of  large radiuses • Contact wheel is offset   to prevent gouging  11297 • Guide wheels prevent  1/2" x 24" 11090 None Guide-Cut Arm undercutting 60 to 80 grit 5/8" dia. x 3/8" wide, rubber • Removes raised material within .020" or less  • Use 60 to 80 grit belts   Part Number Comments Belt Size Contact Wheel Assembly  Platen Pad (W x L) (includes bearing and shaft)   To maximize the life of 1/4" bearings or smaller, lower the operating air pressure to 45 PSIG (3.1 Bar) and run the motor at a lower RPM.     11  Dynafile ®II Air-Powered Abrasive Belt Tool   Reach Normally Inaccessible Areas   ABRASIVE BELT TOOLS   40321 Versatility Kit  • Includes 40320 Dynafile® IIwith 11206 Contact Arm, plus additional 11203 and 11204 Contact Arms. Also includes eight popular abrasive belts and 50010 Collet (1/4") for Die Grinder use, along with 95262 and 95281 Wrenches. All items contained in a durable carrying case.  40324 Versatility Kit  Metric  • Includes 40320 Dynafile® IIwith 11206 Contact Arm, plus additional 11203 and 11320 Contact Arms. Also includes eight popular abrasive belts and 50015 Collet (6 mm) for Die Grinder use, along with 95262 and 95281 Wrenches. All items contained in a durable carrying case.   ABRASIVE BELT TOOLS   ABRASIVE BELTS  1/4" - 3/4" wide x 18" long (6 mm - 19 mm x 457 mm)   Contact Arms: Page 14  • Abrasive Belts: Page 210  • Accessories: Page 159   Model Motor Motor Sound Abrasive Belt Size Maximum Air Flow Max. SFPM Weight Length Height Number hp (W) RPM Level Inch (mm) SCFM (LPM) (SMPM) Pound (kg) Inch (mm) Inch (mm)  40320 .5 (373) 20,000 80 dB(A) 1/4-3/4 (6-19) W x 18 (457) L 28 (793) 4,550 (1,382) 2.5 (1.1) 14-1/4 (362) 4-7/8 (124)  40326 .5 (373) 20,000 80 dB(A) 1/4-3/4 (6-19) W x 20-1/2 (521) L 28 (793) 4,550 (1,382) 2.5 (1.1)  14-1/4 (362) 4-7/8 (124) 40335 .5 (373) 20,000 80 dB(A) 1/4-3/4 (6-19) W x 18 (457) L 28 (793) 4,550 (1,382) 2.5 (1.1)  14-1/4 (362) 4-7/8 (124) 40381 .4 (321) 5,000 82 dB(A) 1/4-3/4 (6-19) W x 18 (457) L 24 (680) 1,500 (457) 2.8 (1.2)  15-1/2 (394) 5-3/4 (146) Additional Specifications: Air Inlet Thread 1/4" NPT   • Hose I.D. Size 3/8" (10 mm)   • Air Pressure 90 PSIG (6.2 Bar) Tune-Up Kits: Models 40320, 40326, 40335 – No. 96044; Model 40381 – No. 96174 (page 192) Recommended Air Line Accessory: 94300 Dynaswivel ® (page 163); 95676 Coupler/Plug Assembly (page 161)   Model 40320   Model 40321   Slack of abrasive belt is used to  efficiently polish radiused area.  Optional 11200 Stroke Sander Arm leaves in-line scratch pattern.   • Grind, deburr, blend and polish, on metal, plastic, fiberglass, composites, rubber, glass and more. Grind from contact wheel or platen pad; finish and polish using slack of belt.  • Lightweight, ergonomic 7° offset design. Grinding head  pivots 360° for securing in most efficient position.  • Belt guard easily detaches for quick abrasive change; simple belt tracking adjustment knob.  Model 40320  For 18" Long Belts  • Includes 11206 Contact Arm for 3/4" wide   x 18" long belts (see page 14).  Model 40335  For 18" Long Belts  • Designed exclusively for use with non-woven nylon belts. Excellent for setting grain lines, achieving consistent satin  finishes on metals, removing oxide and weld discoloration.   • 40375 Rubber Drive Wheel minimizes non-woven nylon  belt slippage. Straight belt path extends abrasive life.  • Includes 11203 Contact Arm for 1/2" wide x 18" long  medium non-woven nylon belt (90292).   Model 40381  Slow Speed, For 18" Long Belts  • 1,500 SFPM. Slow speed ensures longer belt life when working on titanium and other exotic materials.   • Includes 11206 Contact Arm for 3/4" wide  x 18" long belts (see page 14).   Model 40326  For 20-1/2" Long Belts  • Includes 11287 Contact Arm for 5/8" or 3/4" wide abrasive belts. (11287 is only arm that accepts 20-1/2" long belts.)   Dynafile ® IIeasily converts to a Die Grinder with optional 50010 Collet (1/4") or 50015 Collet (6 mm). To convert to a Drill, order 53032 Chuck (1/4").     12 .4 hp Dynafile  ®II Air-Powered Abrasive Belt Tool   Lightweight, Low Profile Version of Dynafile ® II   ABRASIVE BELT TOOLS   .4 hp Dynafile ® IIis ideal for  deburring and finishing in tight areas. Optional offset Contact Arm allows belt to conform to a variety of contours.  Optional 11204 Contact Arm offers ability to grind into contours. Clean and finish using non-woven nylon belts.   ABRASIVE BELT TOOLS   ABRASIVE BELTS  1/8", 1/4", 3/4" wide x 18" long (3 mm, 6 mm, 19 mm x 457 mm)   Contact Arms: Page 14  • Abrasive Belts: Page 210  • Accessories: Page 159   Model Motor Motor Sound  Abrasive Belt Size Maximum Air Flow Max. SFPM Weight Length Height Number hp (W) RPM Level Inch (mm) SCFM (LPM) (SMPM) Pound (kg) Inch (mm) Inch (mm)  40352 .4 (298) 25,000 79 dB(A) 1/8 - 3/4 (3 - 19) x 18 (457) 22 (626) 5,730 (1,747) 1.9 (8.7) 14 (356) 4-1/8 (105) 40353 .4 (298) 25,000 79 dB(A) 1/8 - 3/4 (3 - 19) x 18 (457) 22 (626) 5,730 (1,747) 1.9 (8.7) 14 (356) 4-1/8 (105) Additional Specifications: Air Inlet Thread 1/4" NPT   • Hose I.D. Size 3/8" (10 mm)   • Air Pressure 90 PSIG (6.2 Bar) Tune-Up Kit: No. 96074 (page 192)  • Recommended Air Line Accessory: 95676 Coupler/Plug Assembly (page 161)   • .4 hp Dynafile® IIadds a lightweight, compact variation to Dynabrade’s famous Abrasive Belt Tool line. The optimal low profile belt tool for working in tight areas!  • Grind, deburr, blend, finish and polish. Grind from contact wheel or platen pad; finish and polish using slack of belt.  For use on metal, plastic, fiberglass,  composites, glass and more.   • Compact, low profile housing allows  easy access in tight spots and previously  inaccessible areas. Grinding head pivots  360° for additional flexibility. Ergonomic 7° offset handle.   • Robust .4 hp air motor serves up ample power.  • Lightweight tool design minimizes operator fatigue and increases efficiency.  • Belt guard easily detaches for quick abrasive change; simple belt tracking adjustment knob.  Model 40352  For 18" Long Belts  • Includes 11203 Contact Arm, for coated abrasive belts  1/2" wide x 18" long (see page 14).  Model 40353  For 18" Long Belts  • Designed exclusively for use with non-woven nylon belts. Excellent for setting grain lines, achieving consistent satin  finishes on a variety of metals, and removing oxide and  weld discoloration.   • 40375 Rubber Drive Wheel minimizes non-woven nylon  belt slippage.  • Includes 11203 Contact Arm for 1/2" wide x 18" long medium non-woven nylon belt (90292).    Model 40352   Low Profile Design   Arrows located on Dynafile  ® IIbelt cover indicate abrasive belt direction. Grinding from the RETURN SIDE of the belt will greatly enhance tool performance and increase belt life.   Dynaswivel ® air line connector is ideal for use with most air tools. The Dynaswivel  ®  improves tool maneuverability, minimizes operator fatigue and extends hose life. (See page 163.)   Dynafile ® IIeasily converts to a Die Grinder with optional 50010 Collet (1/4") or 50015 Collet (6 mm). To convert to a Drill, order 53032 Chuck (1/4").   NEW! NEW!     13  Vacuum Dynafile ®II Air-Powered Abrasive Belt Tool   Vacuum While You Work!   ABRASIVE BELT TOOLS   Model 40330  • Includes 11206 Contact Arm for 3/4" wide x 18" long  abrasive belts.  • Excellent for grinding, deburring, finishing and polishing, on wood, plastic, fiberglass and exotic metals.   • Highly portable vacuum system works on tool’s exhaust.  • Includes self-contained “bag-within-bag” dust collection system. 54288 “bag-within-bag” system also sold separately.  • Air line is included and joined to exhaust hose to form  “one cord” for superb maneuverability.   ABRASIVE BELT TOOLS   ABRASIVE BELTS  1/8", 1/4", 3/4" wide x 18" long (3 mm, 6 mm, 19 mm  x 457 mm)   Contact Arms: Page 14  • Abrasive Belts: Page 210  • Accessories: Page 159   Model Motor Motor Sound Abrasive Belt Size Maximum Air Flow Max. SFPM Weight Length Height Number hp (W) RPM Level Inch (mm) SCFM (LPM) (SMPM) Pound (kg) Inch (mm) Inch (mm)  40330 .5 (373) 20,000 93 dB(A) 1/4-3/4 (6-19) W x 18-24 (457-610) L 28 (793) 4,550 (1,382) 2.5 (1.1) 14-1/4 (362) 5 (127) Additional Specifications: Air Inlet Thread 1/4" NPT   • Hose I.D. Size 3/8" (10 mm)   • Air Pressure 90 PSIG (6.2 Bar) Tune-Up Kit: No. 96044 (page 192)  Electric Dynafile ®II Electric-Powered Abrasive Belt Tool   Electric Version of World-Famous Abrasive Belt Tool   ABRASIVE BELTS  1/8", 1/4", 3/4" wide x 18" long (3 mm, 6 mm, 19 mm  x 457 mm)   Model Motor Maximum Abrasive Belt Size Current Maximum Weight Length Height Number RPM Watts Out Inch (mm) Voltage Amps Phase Frequency SFPM (SMPM) Pound (kg) Inch (mm) Inch (mm)  40590 11,600 600 1/4-3/4 (6-19) W x 18-24 (457-610) L 120 V (AC) 6.7 1 60 Hz 2,500 (762) 4.6 (2.1) 17-1/2 (445) 4-3/4 (121)   Model 40590   Model 40591   120 V (AC)   Model 40590  120 V (AC)  • Electric Dynafile® IIruns coated abrasive and non-woven  nylon belts, and is ideal for grinding, deburring, blending, finishing and surface conditioning.  • Tool includes 11203 contact arm, for abrasive belts 1/2" wide x 18" long.  • Also accepts over 20 interchangeable contact arms,  for use with belts 1/4" to 3/4" wide x 18" long (see page 14).  • Side handle included for operator comfort. Handle is  reversible for left or right hand use.  • Tool is double-insulated for safety, and includes electric  cord 8 feet in length.  40591 Versatility Kit  • Includes 40590 Electric Dynafile ® IIwith 11203 Contact Arm and two additional arms (11202 and 11204). Also includes eight abrasive belts of various grits, and an assortment of platen pads. All items contained in durable carrying case.   Model 40330   C US     14   ABRASIVE BELT TOOLSABRASIVE BELT TOOLS  Dynafile ®IIContact Arms For Air and Electric Models - 4" to 17" Workable Reach   Optional 40078 Adapter allows use of 24" long belts. Extends reach to 7" when used with standard contact arms   Part Number Comments Belt Size Contact Wheel Assembly  Platen Pad (W x L) (includes bearing and shaft)  11200 • Work on broad areas 1/2" x 18" 11088 11025 • Leave in-line scratch 5/8" dia. x 3/8" wide, rubber 1/2" wide • Blend spot welds 11201 • 45 PSIG maximum 1/2" x 18" 11068 11027 • Enter channels as  5/16" dia. x 3/8" wide, steel 1/2" wide small as 7/16" 11202 • Enter 5/16" x 3/4"  1/4" x 18" 11074 11032 openings 5/8" dia. x 1/8" wide, rubber 1/4" wide 11203               Order 11312 for heavy-duty version. • Standard on models  1/2" x 18"  11078 11025 40335  and 40590 5/8" dia. x 3/8" wide, rubber 1/2" wide • Grind over contact  wheel or platen 11204 • Unique offset design 1/8", 1/4"  11080 None • Strap polishing is easy  or 1" dia. x  3/8" wide, with this arm 1/2" x 18"  radiused rubber 11206               Order 11326 for heavy-duty version. • Standard on models   5/8" or  11282 11109 40320 and 40330 3/4" x 18"  3/4" dia. x 5/8" wide, rubber 3/4" wide 11220, 11300, 11301, 11341 • 45 PSIG maximum 11220: 11220: 11352  None • Offset design and minia- 5/8" or  5/16" dia. x 5/8" wide, steel ture contact wheels 3/4" x 18"  • 2" strap polish in offset   All Others: 11300: 11332 None area; polish turbine   1/2" x 18" 1/4" dia. x 3/8" wide, steel blades and other  contours 11301: 11068 None 5/16" dia. x 3/8" wide, steel 11341: 11342 None 5/16" dia. x 3/8" wide, rubber 11280 • Grind corners, enter  1/8" or  11086 None grooves, strap polish 1/4" x 18" 1" dia. x 3/8" wide, • “V” shape wheel urethane, tapered 11286 • 11024 Steel Platen  1/2" x 24" 11078 11025 available 5/8" dia. x 3/8" wide, rubber 1/2" wide • 6-3/4" workable reach 11287 • Standard on  5/8" or  11282 11109 Model 40326 3/4" x 20-1/2" 3/4" x 5/8" wide, rubber 3/4" wide • Grind on wheel or platen • 5-1/4" reach     15   Optional 40078 Adapter allows use of 24" long belts. Extends reach to 7" when used with standard contact arms   ABRASIVE BELT TOOLSABRASIVE BELT TOOLS  Dynafile ®IIContact Arms For Air and Electric Models - 4" to 17" Workable Reach   Part Number Comments Belt Size Contact Wheel Assembly  Platen Pad (W x L) (includes bearing and shaft)  11304 • Work on broad areas;  1/2" x 18"  11078 11132 “The Banana Arm” levels in-line scratch; 5/8" dia. x 3/8" wide, rubber 1/2" wide blend stainless  11312 • Heavy-duty steel  1/2" x 18"  11078 11025 • Grind over contact 5/8" dia. x 3/8" wide, rubber 1/2" wide wheel or platen 11314 • 45 PSIG maximum 1/4" x 18" 11066 11034 • File round openings 5/16" dia. x 1/8" wide, steel 1/4" wide as small as 7/16" 11320 • For flat grinding using  1/2" x 18"  5/8" dia. x 3/8" wide, rubber 11026 Offset Arm platen at or near   1/2" wide corners and edges of  large radius round • Contact wheel is offset   to prevent gouging 11321 • 45 PSIG maximum 1/2" x 18"  11070 11025 • Work on contact wheel  7/16" dia. x 3/8" wide, rubber 1/2" wide or platen pad 11322 • Guide-cut 1/2" x 18"  11090 None • Removes raised material 60 to 80 grit 5/8" dia. x 3/8" wide, rubber within .020" or less  without undercutting 11329 • Extra length arm 1/2" x 44"  11078 11025 • 17" workable reach 5/8" dia. x 3/8" wide, rubber 1/2" wide 11330 • Enter 1/2" x 1/2"  1/4" x 18"  11072 11034 openings 7/16" dia. x 1/8" wide, brass 1/4" wide 11337 • Enter channels as  1/2" x 18"  11076 11027 narrow as 9/16" 7/16" dia. x 3/8" wide, steel 1/2" wide 11350 • 45 PSIG maximum 3/4" x 34" 11352 Optional • Excellent for cleaning   5/16" dia. x 5/8" wide, steel 3/4" wide oxide off electrical  bus bars • Arm has a 12"  workable reach 11360 • Unique offset design 1/2" x 18" 11078 None • Grind over contact   5/8" dia. x 3/8" wide, rubber wheels or strap polish     16 Mini-Dynafile ®II Air-Powered Abrasive Belt Tool   Ideal for Strap Polishing and Working in Narrow Openings   ABRASIVE BELT TOOLS   Model 15003  For 12" Long Belts   • Tool includes 15026 Contact Arm for 1/2" wide x 12" long abrasive belts and 15118 Drive Wheel. (See page 17 for additional Contact Arms.)   • Lightweight ergonomic design handle features 7° offset. Multi-position grinding head pivots 360°.  • Belt guard easily detaches for quick abrasive change; simple belt tracking adjustment knob.   • For added versatility, tool can be easily converted  to Die Grinder with optional 01644 (1/4") Threaded  Collet Insert.    • 40378 Rubber Drive Wheel may be ordered separately, for efficient use with optional non-woven nylon belts.   Effective for blending stainless steel and grinding right angle welds. Clean and finish using non-woven nylon belts.   Ideal for finishing and deburring within narrow openings. Finish rough-cut edges quickly and efficiently.   ABRASIVE BELT TOOLS   ABRASIVE BELTS  1/8", 1/4", 1/2" wide x 12" long (3 mm, 6 mm, 13 mm x 305 mm)   Contact Arms: Page 17  • Abrasive Belts: Page 209  • Accessories: Page 159   Model Motor Motor Sound Abrasive Belt Size Maximum Air Flow Max. SFPM Weight Length Height Number hp (W) RPM Level Inch (mm) SCFM (LPM) (SMPM) Pound (kg) Inch (mm) Inch (mm)  15003 .4 (298) 25,000 80 dB(A) 1/8-1/2 (3-13) W x 12 (305) L 20 (566) 4,890 (1,486) 1.8 (.8) 11-3/4 (298) 3-1/2 (89) Additional Specifications: Air Inlet Thread 1/4" NPT   • Hose I.D. Size 1/4" (6 mm)   • Air Pressure 90 PSIG (6.2 Bar) Tune-Up Kit: No. 96074 (page 192)  • Recommended Air Line Accessory: 95676 Coupler/Plug Assembly (page 161)   Model 15003 Model 15006 15006 Versatility Kit  • 15003 Tool (15118 Drive Wheel) with 15026 Contact Arm for 1/2" wide x 12" long abrasive belts. Also includes 15028 and 15030 Arms. (See page 17 for all Contact Arms.)   • Includes 01644 Threaded Collet Insert to easily convert tool to 1/4" Die Grinder.  • Assorted coated and non-woven nylon belts; durable carrying case.   Optional 94994 Overhose Assembly (see page 157) reduces sound levels by as much as 5 dB(A). Overhose also directs exhaust away from operator and work piece. Air line sold separately.   01644 40378     Mini-Dynafile ®IIContact Arms 3" Workable Reach; Exclusive to the Mini-Dynafile ® II   Part Number Comments Belt Size Contact Wheel Assembly  Platen Pad (W x L) (includes bearing and shaft)   To maximize the life of 1/4” bearings, lower the operating air pressure to 45 PSIG (3.1 Bar) and run the motor at a lower RPM.   ABRASIVE BELT TOOLSABRASIVE BELT TOOLS 17   15026 • Standard on  1/2" x 12"  11078 11026 Model 15003 5/8" dia. x 3/8" wide, rubber 1/2" wide • Grind corners,    enter grooves 15027 • Sand on both sides 1/4" x 12"  11074 11033 of arm 5/8" dia. x 1/8" wide, rubber 1/4" wide • Enter confined areas as small as 1/4" 15028 • No platen due to  1/4" or  11080 None offset design 1/2" x 12" 1" dia. x 3/8" wide, rubber • Grind radiuses • Offset for  slack polishing 15029 • Grind corners, enter   1/8" x 12"  11086 None grooves and  1" dia. x 3/8" wide, urethane strap polish 15030 • 45 PSIG maximum 1/2" x 12"  11068 11027 • Enter channels as 5/16" dia. x 3/8" wide, steel 1/2" wide narrow as 7/16" 15031 • 45 PSIG maximum 1/2" x 13"  11070 11027 • Work on contact wheel 7/16" dia. x 3/8" wide, rubber 1/2" wide or platen pad 15032 • 45 PSIG maximum 1/2" x 12"  11332 None • Grind, blend and 1/4" dia. x 3/8" wide, steel polish turbine blades 15033 • 45 PSIG maximum 1/4" x 12"  11342 None • Grind, polish turbine 5/16" dia. x 3/8" wide, rubber blades and other contours     18 Dynafile ®III Air-Powered Abrasive Belt Tool   Excellent for Grinding Welds, Blending and Deburring   ABRASIVE BELT TOOLS   15302 Versatility Kit  • Includes 15300 Dynafile® IIIwith 15321, 15350 and 15357 Contact Arms (see page 20), plus assortment of abrasive belts, spare 15336 Drive Wheel, wrenches and hex keys, all in durable carrying case.    Model 15300  For 18" Long Belts  • Dynafile® IIIAbrasive Belt Tool offers all the versatility of our world-famous Dynafile ® II, while serving up more power (.7 hp / 522 W) for faster material removal.  • Tool includes high-efficiency Rubber Drive Wheel, ideal for use with all abrasive belts.   • Includes 15350 Contact Arm for 1" wide x 18" long belts (see page 20).  • Tool grinding head pivots 360°.  • Soft grip handle assembly allows operator to apply additional force to contact wheel. Handle also offers enhanced control and maneuverability.   • Optional safety-lock throttle lever is available.    Utilized for blending scratch patterns and grinding right angle welds.  15350 Contact Arm with serrated wheel allows aggressive removal.   ABRASIVE BELT TOOLS   ABRASIVE BELTS   1/4", 1/2", 3/4", 1" wide x 18" long (6 mm, 13 mm, 19 mm, 25 mm x 457 mm)   Contact Arms: Page 20  • Abrasive Belts: Page 210  • Accessories: Page 159   Model Motor Motor Sound Abrasive Belt Size Maximum Air Flow Max. SFPM Weight Length Height Number hp (W) RPM Level Inch (mm) SCFM (LPM) (SMPM) Pound (kg) Inch (mm) Inch (mm)  15300 .7 (522) 20,000 87 dB(A) 1/4 - 1 (6-25) W x 18 (457) L 32 (906) 4,550 (1,382) 2.5 (1.1) 14-1/4 (362) 4-7/8 (124) Additional Specifications: Air Inlet Thread 1/4" NPT   • Hose I.D. Size 3/8" (10 mm)   • Air Pressure 90 PSIG (6.2 Bar) Tune-Up Kit: No. 96233 (page 192) • Recommended Air Line Accessory: 95676 Coupler/Plug Assembly (page 161)   Model 15300   Model 15302   Below: Strap sanding with optional 15375 Arm   Several Dynafile ® IIIContact Arms serve a dual purpose. These Arms are REVERSIBLE to allow for platen sanding OR strap polishing. (See page 20.)   Dynafile ® IIContact Arms may also be used with Dynafile ® III . (See page 14.)   Dynaswivel ® air line connector is ideal for use with most air tools. The Dynaswivel  ®  improves tool maneuverability, minimizes operator fatigue and extends hose life. (See page 163.)     19  Dynafile ®III Air-Powered Abrasive Belt Tool   Lightweight Models With Popular Contact Arms    ABRASIVE BELT TOOLS   • Dynafile® IIIAbrasive Belt Tool offers all the versatility of  our world-famous Dynafile® II, while serving up more power (.7 hp / 522 W) for faster material removal.  • Responding to the needs of the marketplace, Dynabrade now offers additional Dynafile ® IIImodels. These tools are equipped with our most popular Contact Arms, ideal for a variety of applications.  • Models do not include side handle, reducing tool weight and allowing greater maneuverability. (53163 side handle is still available as an option.)  • Models include high-efficiency Rubber Drive  Wheel, ideal for use with all abrasive belts.   • Tool grinding head pivots 180°.  Model 15400  For 18" Long Belts  • Includes 11206 Contact Arm for belts 5/8"  or 3/4" wide x 18" long (see page 20).   Model 15401  For 20-1/2" Long Belts  • Includes 11287 Contact Arm for belts 5/8" or 3/4" wide x 20-1/2" long (see page 20).   Model 15420  For 24" Long Belts  • Includes 11702 Contact Arm with unique 4" diameter wheel (see page 20), for grinding or blending right angle welds and fillit welds. Contact Arm includes hand guide for additional control. Saves time and reduces costs!   • Grinds corner welds with no undercutting.  • Tool accepts belts 24" long, in widths of 1/4"or 1/2".   ABRASIVE BELT TOOLS   ABRASIVE BELTS   1/4", 1/2", 3/4", 1" wide x 18" long (6 mm, 13 mm, 19 mm, 25 mm x 457 mm)   Contact Arms: Page 20  • Abrasive Belts: Page 210  • Accessories: Page 159   Model 15420   15400 Dynafile ® III allows finishing and deburring in restricted areas.  15420 tool (below) includes unique 11702 Contact Arm with hand guide.   Model 15400   Arrows located on Dynafile  ® belt cover indicate abrasive belt direction. Grinding from the RETURN SIDE of the belt will greatly enhance tool performance and increase belt life.   Model Motor Motor Sound Abrasive Belt Size Maximum Air Flow Max. SFPM Weight Length Height Number hp (W) RPM Level Inch (mm) SCFM (LPM) (SMPM) Pound (kg) Inch (mm) Inch (mm)  15400 .7 (522) 20,000 87 dB(A) 5/8 (16) or 3/4 (19) W x 18 (457) L 32 (906) 4,550 (1,382) 2.5 (1.1) 14-1/4 (362) 4-7/8 (124) 15401 .7 (522) 20,000 87 dB(A) 5/8 (16) or 3/4 (19) W x 20-1/2 (521) L 32 (906) 4,550 (1,382) 2.5 (1.1) 15-1/2 (394) 4-7/8 (124) Additional Specifications: Air Inlet Thread 1/4" NPT   • Hose I.D. Size 3/8" (10 mm)   • Air Pressure 90 PSIG (6.2 Bar) Tune-Up Kit: No. 96233 (page 192) • Recommended Air Line Accessory: 95676 Coupler/Plug Assembly (page 161)   Model Motor Motor Sound Abrasive Belt Size Maximum Air Flow Max. SFPM Weight Length Height Number hp (W) RPM Level Inch (mm) SCFM (LPM) (SMPM) Pound (kg) Inch (mm) Inch (mm)  15420 .7 (522) 20,000 87 dB(A) 1/4 (6) or 1/2 (13) W x 24 (610) L 32 (906) 4,550 (1,382) 2.5 (1.1) 14 (356) 4-7/8 (124) Additional Specifications: Air Inlet Thread 1/4" NPT   • Hose I.D. Size 3/8" (10 mm)   • Air Pressure 90 PSIG (6.2 Bar) Tune-Up Kit: No. 96233 (page 192) • Recommended Air Line Accessory: 95676 Coupler/Plug Assembly (page 161)     20   ABRASIVE BELT TOOLSABRASIVE BELT TOOLS  Dynafile ®IIIContact Arms 4" to 6-3/4" Workable Reach   Part Number Comments Belt Size Contact Wheel Assembly  Platen Pad (W x L) (includes bearing and shaft)  11200 • Work on broad areas 1/2" x 18"  11088 11025 • Leave in-line scratch 5/8" dia. x 3/8" wide, rubber 1/2" wide • Blend stainless 11203 • Standard on Models  1/2" x 18" 11078 11025 40335 and 40590 5/8" dia. x 3/8" wide, rubber 1/2" wide • Grind over contact  wheel or platen • Order 11312 for  heavy-duty, or 11325  for steel platen version 11204 • Unique offset design 1/8", 1/4"  11080 None • Strap polishing is easy  or 1" dia. x  3/8" wide, with this arm 1/2" x 18"  radiused rubber 11206 • Standard on Models  5/8" or  11282 11109 40320  and 40330 3/4" x 18" 3/4" dia. x 5/8" wide, rubber 3/4" wide • Order 11326 for  heavy-duty steel  construction version  11286 • 11024 Steel Platen  1/2" x 24"  11078 11025 available 5/8" dia. x 3/8" wide, rubber 1/2" wide • 6-3/4" workable reach 11287 • Standard on Model  5/8" or  11282 11109 40326 3/4" x 20-1/2" 3/4" dia. x 5/8" wide, rubber 3/4" wide • Grind on wheel or platen • 5-1/4" reach 11320 • For flat grinding using  1/2" x 18"  11078 11026 Offset Arm platen at or near   5/8" dia. x 3/8" wide, rubber 1/2" wide corners and edges of  large radius round • Contact wheel is offset  to prevent gouging  bus bars 11702 • Perfectly designed to 1/2" or 1" x 11638 None reach up to 2" in a  30" 70 durometer channel 4" dia.  x 1/2" wide, • Great for use with radiused rubber scalloped edge abrasives, blending weld seams     21   ABRASIVE BELT TOOLSABRASIVE BELT TOOLS  Dynafile ®IIIContact Arms 4" to 6-3/4" Workable Reach   Part Number Comments Belt Size Contact Wheel Assembly  Platen Pad (W x L) (includes bearing and shaft)  15321 • For flat grinding using  1" x 18"  15320 15323 platen pad 3/4" dia. x 7/8" wide, rubber 1" wide 15326 • Allows for longer reach 1" x 24"  15320 15323 • Grind using platen pad 3/4" dia. x 7/8" wide, rubber 1" wide 15350 • Reversible arm - arm   1" x 18"  15349 15323 can be flipped to allow  90 durometer 1" wide for platen sanding or  2" dia. x 1" wide, rubber strap polishing • Standard with tool 15351 • Reversible arm - arm   1" x 18"  15348 15323 can be flipped to allow  70 durometer 1" wide for platen sanding or  2" dia. x 1" wide, rubber strap polishing 15356 • Reversible arm - arm  1" x 18"  15346 15323 can be flipped to allow  40 durometer 1" wide for platen sanding or  2" dia. x 5/8" wide, rubber strap polishing 15357 • Reversible arm - arm  1" x 18" 15347 15323 can be flipped to allow  2" dia. x 1" wide, rubber 1" wide for platen sanding or  strap polishing • “V” shape wheel 15368 • Allows for longer reach 1" x 30"  15359 None • Grind using wheel  70 durometer surface 1" dia. x 1" wide, serrated rubber 15375 • Great for strap 1" x 24"  15348 None polishing 70 durometer 2" dia. x 1" wide, rubber     22 Dynabelter ®   Air-Powered Abrasive Belt Tool   For Weld Grinding, Blending and Finishing on Metal and Other Surfaces   ABRASIVE BELT TOOLSABRASIVE BELT TOOLS   ABRASIVE BELTS  1", 2" wide x 30" long  (25 mm, 51 mm x 762 mm)    Contact Arms: Page 24  • Abrasive Belts: Page 211  • Bench Mount: Page 206   Model Motor Motor Sound Abrasive Belt Size Air Inlet Maximum Air Flow Max. SFPM Weight Length Height Number hp (W) RPM Level Inch (mm) Thread SCFM (LPM) (SMPM) Pound (kg) Inch (mm) Inch (mm)  11475 0.7 (522) 18,000 92 dB(A) 1/4-1 (6-25) W x 30 (762) L 1/4" NPT 32 (906) 5,890 (1,789) 7.5 (3.4) 21 (533) 7-1/4 (184) 11476 1.2 (895) 13,000 89 dB(A) 1/4-1 (6-25) W x 30 (762) L 3/8" NPT 58 (1,643) 4,250 (1,295) 10 (4.5) 21 (533) 7-1/4 (184) 11477 2.0 (1,492) 7,200 82 dB(A) 1-2 (25-51) W x 30 (762) L 1/2" NPT 70 (1,982) 4,700 (1,432) 14 (6.4) 21-1/2 (546) 7-3/4 (197) Additional Specifications: Hose I.D. Size 1/2" (13 mm)   • Air Pressure 90 PSIG (6.2 Bar) Tune-Up Kits: Model 11475 – No. 96045; Model 11476 – No. 96011; Model 11477 – No. 96259 (page 192)   Model 11475  Standard Duty, .7 hp  • Accepts 1" wide x 30" long abrasive belts.  • Adjustable speed; removable side handle.  • Includes 11681 Contact Arm Assembly (see page 24).  • Ideal for use with 1/4" Dynaswivel ® (see page 163), and  95676 Coupler/Plug Assembly (see page 161).   Model 11477  Extra Heavy-Duty, 2.0 hp  • Accepts 2" wide x 30" long abrasive belts.  • Includes pressure bar with top control handle.  • Includes 11870 Contact Arm Assembly (see page 24).  • 11871 Contact Arm with 4" dia. contact wheel is available  for 2" wide x 60" long belts, providing a 20" workable reach. Optional 11891 Platen is available for 11871 Arm (see page 24).  • Ideal for use with 1/2" Dynaswivel ® (see page 163), and  98273 Coupler/Plug Assembly (see page 161).   Model 11475 is ideal for grinding circumferential welds.  Model 11476 grinds weld seam and leaves in-line scratch pattern.   Model 11475 Model 11476 Model 11477   • Dynabelter® is ideal for work on ferrous and non-ferrous  metals, wood, plastic, stone and composites.   • Uses include grinding cylinders, deburring castings,  cleaning welds and fabricating metals.   • Also excellent for polishing tubing, deburring structural steel, finish-dimensioning on lathe work and blending inside corners.  • Safety-lock lever throttle included on all models.   Model 11476  Heavy-Duty, 1.2 hp  • Accepts 1" wide x 30" long abrasive belts.  • Includes 11681 Contact Arm Assembly (see page 24), and top control handle.   • Ideal for use with 3/8" Dynaswivel ® (see page 163), and  98265 Coupler/Plug Assembly (see page 161).   After attaching new abrasive belt, hold tool by the contact wheel and suspend tool vertically, to ensure that the belt is taut. Then tighten knob and flip tension lever.   Placing Dynabelter ® motor at a 45º angle from the belt housing will increase pressure while grinding. Pull tool towards you, working off the RETURN SIDE of the belt for faster removal.     23  Dynabelter ® Accu-Grinder Air-Powered Abrasive Belt Tool with Adjust-A-Wheel   Grinds Welds Flat, Without Undercutting  ABRASIVE BELT TOOLSABRASIVE BELT TOOLS   ABRASIVE BELTS  1" wide x 30" long  (25 mm x 762 mm)   Place 11486 Dynabelter handle at 45° angle from belt housing to increase grinding pressure. Pull tool toward operator for faster material removal.   Model Motor Motor Sound Abrasive Belt Size Maximum Air Flow Max. SFPM Air Inlet Weight Length Height Number hp (W) RPM Level Inch (mm) SCFM (LPM) (SMPM) Thread Pound (kg) Inch (mm) Inch (mm)  11486 1.2 (895) 13,000 89 dB(A) 1 (25) W x 30 (762) L 58 (1,643) 4,220 (1,282) 3/8" NPT 9.0 (4.1) 22 (559) 7 (178) Additional Specifications: Hose I.D. Size 1/2" (13 mm)   • Air Pressure 90 PSIG (6.2 Bar) Tune-Up Kit: No. 96011 (page 192)  • Recommended Air Line Accessory: 98265 Coupler/Plug Assembly (page 161)   Model 11486   Contact Arms: Page 24  • Abrasive Belts: Page 210  • Accessories: Page 159   Dynabelter ® Accessories   11739 Dynabelter® Adapter  • Dynafile® Contact Arms (see pg. 9), can be mounted on 11475 and 11476 Dynabelter® models with optional  11739 Adapter.  • Allows for work in small areas using 30" belts (8" reach).   Dynabelter® Contact Arm Extender   • Allows for longer abrasive belts! The Dynabelter ® uses standard 30" long abrasive belts, however, these extenders allow Contact Arms to use longer abrasive belts.  • Extenders can only be used with Dynabelter ® Contact Arms.  11656 Extender 11657 Extender   • For 42" belts (13"reach) • For 54" belts (19" reach)  11679 Extender  • For 60" belts (21" reach)   Model 11739 Model 11656 Model 11679   Model 11486  Heavy-Duty, 1.2 hp  • Efficiently removes excess weld material and leaves a  narrow “in-line” scratch pattern. This model takes the guesswork out of weld grinding, and prevents undercutting!   • Adjustable guide tires control the depth of abrasive belt cut. Simple twist-knobs adjust depth of cut. Allows controlled grinding on flats, contours and inside/outside of pipes and tanks.  • Includes 11717 Adjust-A-Wheel Contact Arm with 90-durometer standard serrated Contact Wheel, 2" diameter x 1" wide (see page 24).  Work on Longitudinal Welds:  • I.D. – 12" diameter pipe or larger.  • O.D. – 8" diameter pipe or larger.     24   ABRASIVE BELT TOOLSABRASIVE BELT TOOLS  Dynabelter ® Contact Arms Variety of Contact Wheels and Wheel Assemblies   Part Number Comments Belt Size Contact Wheel Assembly  Platen Pad (W x L) (includes bearing and shaft)  11681 • 7-1/2" workable reach 1" x 30" 11650 (Included) 11605 • Grind using platen pad   70 durometer standard serrated 1" x 2-1/2"  serrated rubber, 2" dia. x 1" wide  11618 90 durometer standard   serrated rubber, 2" dia. x 1" wide   11663 • Grind, deburr, polish  1" x 30" 11616 11605 over platen 80 durometer smooth rubber,  1" x 2-1/2" • 7-1/2 workable reach 1" dia. x 1" wide 11668 • Wheel mount pivots to 1" x 30" 11616 11605  maintain surface contact Two wheels, 80 durometer  1" x 1-7/8" • Work on broad areas,  smooth rubber,  blend stainless 1" dia. x 1" wide • Leaves “in-line” scratch  pattern • 6" workable reach 11677 • Grind, blend, polish welds 1" x 30" 11620 None • Strap polish using  40 durometer smooth rubber,  slack of belt (80 durometer available, 11622) • 7" workable reach 4" dia. x 1" 11682 • Grind, deburr fillet   1/2" or  11638 None welds, inside corners 1" wide x  70 durometer radiused rubber,  • 7" workable reach 30" long 4" dia. x 1/2" wide 11684 • Polish contours without  1" x 30" 11642 None gouging workpiece 40 durometer serrated rubber, • Ideal for stainless pipe (80 durometer wheel – 11892; • 7" workable reach 90 durometer wheel – 11888)  4" dia. x 5/8"  wide 11717 • For best results when 1" x 30"  11618 None ordering 11717 Contact   90 durometer standard  Arm for Dynabelter  serrated urethane  Model 11476 add: 2" dia. x 1" wide -  11544 Pressure Bar -  Three 95150  Mounting Screws -  11794 Back Wheel  Assembly 11870 • 2" dia. x 2" wide   2" x 30"  2" dia. x 2" wide rubber  Optional  urethane wheel   assemblies available: 11659   assemblies are only for   11847:  (Included) 70 durometer 2" x 2-1/2"  extra heavy-duty tools  standard serration  • 7" workable reach 11849: 70 durometer  scoop serration  11851: 90 durometer  standard serration  11853: 90 durometer  scoop serration     25   Powerful Direct-Drive Air Motor with Adjustable Speed   ABRASIVE BELT TOOLSABRASIVE BELT TOOLS   Abrasive Belts: Page 210  • Accessories: Page 159   Dynangle ®   Air-Powered Abrasive Belt Tool   Dynangle ® Contact Arms   ABRASIVE BELTS  1" wide x 18" long (25 mm x 457 mm)   When working on spot welds, lower platen to avoid gouging of work surface with contact wheel.   Model Motor Motor Sound Abrasive Belt Size Maximum Air Flow Max. SFPM Weight Length Height Number hp (W) RPM Level Inch (mm) SCFM (LPM) (SMPM) Pound (kg) Inch (mm) Inch (mm)  14200 .7 (522) 20,000 92 dB(A) 1 (25) W x 18 (457) L 36 (1,020) 6,540 (1,987) 4.8 (2.2) 11 (279) 5 (127) Additional Specifications: Air Inlet Thread 1/4" NPT   • Hose I.D. Size 3/8" (10 mm)   • Air Pressure 90 PSIG (6.2 Bar) Tune-Up Kit: No. 96045 (page 192)  • Recommended Air Line Accessory: 95676 Coupler/Plug Assembly (page 161)   Model 14200   14261 1" x 18" 14251 70 durometer Smooth 1/2" radiused corner 1" dia. x 1" wide urethane 14263 1" x 18" 14253  70 durometer Smooth 3/4" radiused corner 1-1/2" dia. x 1" wide urethane 14266 1" x 18" 14256 70 durometer Standard  1" radiused corner 2" dia. x 1" wide rubber serrated   Part Number Belt Size Contact Wheel Assembly Wheel Material Surface Use (W x L) (includes bearing and shaft)   Model 14200  • Compact tool is ideal for work in tight spots; handle is  multi-positional. Perfect for blending radiuses and adding  grain to stainless steel sinks.  • Quick and easy abrasive belt change. Accepts coated abrasive belts and non-woven nylon belts.  • Interchangeable Contact Arms match specific applications on stainless steel (see below). Also ideal for refinishing drilling screws and pump screws.  • Includes 14266 Contact Arm and 11605 Hard/Cork Dynapad® Platen Pad.     26   ABRASIVE BELT TOOLSABRASIVE BELT TOOLS   Abrasive Belts: Page 211  • Accessories: Page 159   Dynangle ®II Air-Powered Abrasive Belt Tool   Polish, Grind Contours and Flats   • Surface conditions stainless steel and most other metals.  Also used on wood, plastic, fiberglass and composites.  Blends and finishes solder seams.   • Built-in abrasive belt guard;  fast belt change.  • Safety-lock lever-throttle; hanger brackets included for optional overhead suspension.   Model 14300 Single Motor   • Uses 2" x 34" belts; belts spans 11-1/2" for “strap polishing” up to 36" diameter pipe.  • 14350 Conversion Kit available to upgrade single motor model to a dual motor model at a later date, if desired. NOTE: For grinding with a platen pad, dual motor models are recommended.   Model 14303 Heavy-Duty “Dual Motor” with Platen  • Heavy-duty “dual motor” for extra power.  • Uses 2" x 34" belts; belts spans 11-1/2" for “strap polishing”  up to 36" diameter pipe.  • Includes 2" wide x 6" long platen which is easily removed for strap polishing.   Model 14306 Heavy-Duty “Dual Motor” with Platen  • Heavy-duty “dual motor” for extra power.  • Uses 2" x 45" belts; belts spans 17" for polishing pipe up to 48" diameter.  • Includes 2" wide x 6" long platen which is easily removed for strap polishing.   ABRASIVE BELTS  2" wide x 34" or 45" long (51 mm x 864 mm, 1143 mm)   For optimum use of Dynangle ® II, it is critical that proper air flow is maintained.   To maintain belt tension, use “J-Weight” abrasive belts with low-flex or low-stretch backing.   Model 14300  Model 14303   Model Motor Motor Sound Abrasive Belt Size Maximum Air Flow Max. SFPM Weight Length Height Number hp (W) RPM Level Inch (mm) SCFM (LPM) (SMPM) Pound (kg) Inch (mm) Inch (mm)  14300 1.2 (895) 13,000 85 dB(A) 2 (51) W x 34 (864) L 53 (1,501) 8,500 (2,591) 15.1 (16.9) 18-7/8 (479) 8-1/2 (216) 14303 2.4 (1,790) 13,000 85 dB(A) 2 (51) W x 34 (864) L 106 (3,002) 8,500 (2,591) 18.7 (8.2) 18-7/8 (479) 9-9/16 (243) 14306 2.4 (1,790) 13,000 90 dB(A) 2 (51)W x 45 (1,143) L 106 (3,002) 8,500 (2,591) 19.2 (8.7) 22-7/8 (581) 9-1/2 (241) Additional Specifications: Air Inlet Thread 1/2" NPT   • Hose Size 1/2" (13 mm)   • Air Pressure 90 PSIG (6.2 Bar) Tune-Up Kit: No. 96011 (Dual motor models require two Tune-Up Kits) • Recommended Air Line Accessory: 98273 Coupler/Plug Assembly (page 161)   14300 Dynangle ® II is utilized for “strap polishing” on a cylindrical stainless steel surface.     27  “Take-About” Sander Air-Powered Abrasive Belt Tool  ABRASIVE BELT TOOLSABRASIVE BELT TOOLS   ABRASIVE BELTS  3” wide x 24” long (76 mm x 610 mm)   Abrasive Belts: Page 211  • Accessories: Page 159   Model 52900   Platen Pads Provide Belt Support on Dynabrade Abrasive Belt Tools   1/8" (3 mm)  1/8" (3 mm)   Soft Platen Pads • Top facing  • Sponge base  • Pressure sensitive adhesive  For work on  contoured pieces  For heavy deburring and polishing   Part Package Number For Use on These Tools Width Length Thickness Quantity  11032 Dynafile®,  Dynafile® II 1/4" 7" 1/8" 5 11025 Dynafile®,  Dynafile® II,  Dynafile® III 1/2" 7" 1/8"  5 11119 Dynafile® II 3/4" 7" 1/8" 5 15323 Dynafile® III 1" 2" 1/8" 5   Hard Platen Pads • Top facing  • Cork base  • Pressure sensitive adhesive   Part Package Number For Use on These Tools Width Length Thickness Quantity  11033 Mini-Dynafile® II 1/4" 7" 1/8" 5 11026 Dynafile®,  Dynafile® II, Mini-Dynafile® II,  Dynafile® III 1/2" 7" 1/8" 5 11109 Dynafile® II,  Dynafile® III 3/4" 7" 1/8" 5 15324 Dynafile® III 1" 2" 1/8" 5   Part Package Number For Use on These Tools Width Length Thickness Quantity  11034 Dynafile®,  Dynafile® II 1/4" 7"   1/32"  5 11027 Dynafile®,  Dynafile® II,  Mini-Dynafile® II 1/2" 7" 1/32" 5 11129 Dynafile® II 3/4" 7" 1/32" 5   For use with Contact Arms with small diameter Contact Wheels (such as 11212)   Thin Platen Pads • Top facing  • Pressure sensitive adhesive   11025 Platen Pad affixed to  11218 Dynafile ®  Contact Arm    1/32" (.8 mm)   Model Motor Motor Sound Abrasive Belt Size Maximum Air Flow Max. SFPM  Air Inlet Weight Length Height Number hp (W) RPM Level Inch (mm) SCFM (LPM) (SMPM) Thread Pound (kg) Inch (mm) Inch (mm)  52900 1.3 (969) 12,000 88 dB(A) 3 (76) W x 24 (610) L 50 (1,416) 1,700 (516) 3/8" NPT 12.5 (5.7) 13-1/4  (337) 7-1/8 (181) Additional Specifications: Air Pressure 90 PSIG (6.2 Bar)  • Hose I.D. Size 1/2" (13 mm)  • Recommended Accessory: 98265 Coupler/Plug Assembly (page 161)      Dynaswivel ® air line connector is ideal  for use with most air tools.  The Dynaswivel ®  improves tool  maneuverability, minimizes  operator fatigue and extends  hose life. (See page 163.)   Ideal for Surface Leveling, Graining and Finishing   Model 52900  • Heavy-duty 1.3 hp sander (12,000 RPM) powers 3" x 24" abrasive belts, for aggressive material removal on metal and wood.  • Toggle switch offers simple one-step belt tensioning.  • Pistol-grip handle and top control knob allow enhanced operator control.  • Easily adjustable tracking of abrasive belt.  • Tool works well with non-woven nylon belts.  • Safety-lock throttle  lever is included.     Dynastraight® .......................................... 29 Lightweight Dynastraight®............................ 34 Dynastraight® Flapper ................................ 35 Lightweight Dynastraight® Plus ...................... 35 DynaRover .............................................. 36 Rolling Pin Sander .................................... 37   Mini-Dynisher .......................................... 37 Dynisher ................................................ 38 Electric Dynisher ...................................... 39 Dyninger ................................................ 40 Lightweight Dyninger ................................ 41 Industrial DynaZip .................................... 43     29  Dynastraight ®   Air-Powered Abrasive Finishing Tool   For Graining, Cleaning and Polishing on Stainless Steel, Aluminum, Carbon Steel, Composites     ABRASIVE FINISHING TOOLS   Model 13200  950 RPM, .7 hp  Model 13500  950 RPM, 1 hp  • Each model includes 13071 Combo Arbor, for up to 3" wide wheels with 5/8" or 1" diameter center hole.   Model 13501  1,800 RPM, 1 hp  • 13071 Combo Arbor, for up to 3" wide wheels with 5/8" or 1" dia. center hole.  • Any Dynacushion® pneumatic wheel with 5/8" dia. bore (such as 92938) may be mounted.  Model 13521  1,800 RPM, 1 hp  • 13015 Threaded Arbor (5/8"-11) ideal for use with optional 94472 Dynacushion® Pneumatic Wheel.   Model 13511  1,800 RPM, 6" Extension, 1 hp  • 5/8" or 1" diameter combo arbor for up to 3" wide wheels with 5/8" or 1" diameter center hole.  • Any Dynacushion® pneumatic wheel with 5/8" dia. bore (such as 92938) may be mounted.  • Cushioned grip enhances operator comfort.  Model 13531  1,800 RPM, 6" Extension, 1 hp  • 5/8"-11 threaded arbor accepts up to 3-1/2" wide pneumatic wheels (not included) with threaded 5/8"-11 center hole. Ideal set-up for optional Dynacushion ®  pneumatic wheel with 5/8"-11 thread (such as 92805).  • Cushioned grip enhances operator comfort.   ABRASIVE FINISHING TOOLS   PNEUMATIC WHEELS, CONDITIONING DISCS, FLAP WHEELS  Up to 8" (203 mm) diameter   Pneumatic Wheels: Page 182  • Abrasives: Page 208  • Accessories: Page 159   Model 13511   Model Motor Motor Sound Maximum Air Flow Wheel Arbor  Air Inlet Tool Weight Length Height Number hp (W) RPM Level SCFM (LPM) Diameter Thread Thread Pound (kg) Inch (mm) Inch (mm)  13200 .7 (522) 950 84 dB(A) 34 (957) 5/8" or 1" 1/4" NPT 1/2"-20 Male 4.7 (2.1) 14-7/8 (378) 1-3/4 (44) 13500 1 (744) 950 81 dB(A) 43 (1,218) 5/8" or 1" 3/8" NPT 1/2"-20 Male 5.2 (2.4) 15-3/4 (400) 1-7/8 (48) Tune-Up Kit:.7 hp Model – No. 96260; 1 hp Model – No. 96532(page 192)  • Additional Specifications: Hose I.D. Size 3/8" (10 mm)   • Air Pressure 90 PSIG (6.2 Bar)   Model Motor Motor Sound Maximum Air Flow Wheel Arbor  Air Inlet Tool Weight Length Height Number hp (W) RPM Level SCFM (LPM) Diameter Thread Thread Pound (kg) Inch (mm) Inch (mm)  13501 1 (744) 1,800 84 dB(A) 34 (952) 5/8" or 1" 3/8" NPT 1/2"-20 Male 4.2 (1.9) 13-3/8 (339) 1-7/8 (48) 13521 1 (744) 1,800 84 dB(A) 34 (952) 5/8"-11 Male 3/8" NPT 1/2"-20 Male 3.8 (1.7) 14-7/8 (378) 1-7/8 (48) 13511 1 (744) 1,800 82 dB(A) 34 (952) 5/8" or 1" 3/8" NPT N/A 4.6 (2.1) 17-1/4 (438) 1-7/8 (48) 13531 1 (744) 1,800 82 dB(A) 34 (952) 5/8"-11 Male 3/8" NPT N/A 4.2 (1.9) 17-1/2 (445) 1-7/8 (48) Tune-Up Kit: No. 96532 (page 192)  • Additional Specifications: Hose I.D. Size 3/8" (10 mm)   • Air Pressure 90 PSIG (6.2 Bar)   Part Number 13015   Arbors   See page 186 for detailed arbor information.  Part Number 13071  13200 Dynastraight ®runs optional Non-Woven Nylon Wheel (see page 218).   When using pneumatic wheels, inflate wheel only enough to hold the abrasive belt without slippage. Over-inflating the wheel can lead to “chatter marks” on the surface.   Slower speed achieves longer and deeper grain pattern in work surface.   Model 13521   Wheel Sold Separately Wheel Sold Separately   Model 13200  Model 13200     30 Dynastraight ®   Air-Powered Abrasive Finishing Tool   For Graining, Cleaning and Polishing on Stainless Steel, Aluminum, Carbon Steel, Composites   ABRASIVE FINISHING TOOLS   Model 13201  3,400 RPM, .7 hp  • 13016 Arbor for up to 2" wide x 1/2" I.D. wheels. Any accessory with 1/2" dia. bore may be mounted.  Model 13202  3,400 RPM, .7 hp  • 13017 Arbor for up to 2" wide x 5/8" I.D. wheels. Any accessory with 5/8" dia. bore may be mounted.  Model 13204  3,400 RPM, .7 hp  • 13015 Threaded Arbor (5/8"-11) ideal for use with optional 94472 Dynacushion® Pneumatic Wheel.  Model 13205  3,400 RPM, .7 hp  • 13071 Combo Arbor for up to 3" wide wheels with 5/8" or 1" dia. center hole. Any Dynacushion ® pneumatic wheel with 5/8" bore may be mounted (such as 92936).  13220 Versatility Kit  • Includes 13204 Dynastraight; 94472 Dynacushion ®  Pneumatic Wheel; 94465 Wheel Inflation Tool (1/4" NPT); 94300 Dynaswivel® (1/4" NPT); 13016 Arbor; assortment of abrasives.   Model 13502  3,400 RPM, 1 hp  • 13016 Arbor for up to 2" wide x 1/2" I.D. wheels. Any accessory with 1/2" dia. bore may be mounted.  • Ideal set-up for optional surface conditioning discs (shown).  Model 13503  3,400 RPM, 1 hp  • 13017 Arbor for up to 2" wide x 5/8" I.D. wheels. Any accessory with 5/8" dia. bore may be mounted.   ABRASIVE FINISHING TOOLS   PNEUMATIC WHEELS, CONDITIONING DISCS, FLAP WHEELS  Up to 8" (203 mm) diameter   Pneumatic Wheels: Page 182  • Abrasives: Page 208  • Accessories: Page 159   Model 13502   13204 Dynastraight ®powers optional 94472 Dynacushion ®pneumatic wheel on stainless steel.   Model Motor Motor Sound Maximum Air Flow Wheel Arbor  Air Inlet Tool Weight Length Height Number hp (W) RPM Level SCFM (LPM) Diameter Thread Thread Pound (kg) Inch (mm) Inch (mm)  13201 .7 (522) 3,400 82 dB(A) 35 (977) 1/2" 1/4" NPT 1/2"-20 Male 3.9 (1.8) 13-5/8 (346) 1-3/4 (44) 13202 .7 (522) 3,400 82 dB(A) 35 (977) 5/8" 1/4" NPT 1/2"-20 Male 3.9 (1.8) 13-5/8 (346) 1-3/4 (44) 13204 .7 (522) 3,400 82 dB(A) 35 (977) 5/8"-11 1/4" NPT 1/2"-20 Male 3.8 (1.7) 14-5/8 (371) 1-3/4 (44) 13205 .7 (522) 3,400 82 dB(A) 35 (977) 5/8" or 1" 1/4" NPT 1/2"-20 Male 4.0 (1.8) 13-5/8 (346) 1-3/4 (44) 13502 1 (744) 3,400 80 dB(A) 43 (1,218) 1/2" 3/8" NPT 1/2"-20 Male 4.3 (2.0) 15-1/8 (384) 1-7/8 (48) 13503 1 (744) 3,400 80 dB(A) 43 (1,218) 5/8" 3/8" NPT 1/2"-20 Male 4.2 (1.9) 13-7/8 (353) 1-7/8 (48) Tune-Up Kit:.7 hp Model – No. 96260; 1 hp Model – No. 96532(page 192)  • Additional Specifications: Hose I.D. Size 3/8" (10 mm)   • Air Pressure 90 PSIG (6.2 Bar)   Arbors   See page 186 for detailed arbor information.   Part Numbers 13016 and 13017Part Number  13015  Part Number  13071   Model 13220  Model 13204   Disc Sold Separately     31  Dynastraight ®   Air-Powered Abrasive Finishing Tool   For Graining, Cleaning and Polishing on Stainless Steel, Aluminum, Carbon Steel, Composites   ABRASIVE FINISHING TOOLSABRASIVE FINISHING TOOLS   PNEUMATIC WHEELS, CONDITIONING DISCS, FLAP WHEELS  Up to 8" (203 mm) diameter   Pneumatic Wheels: Page 182  • Abrasives: Page 208  • Accessories: Page 159   Model Motor Motor Sound Maximum Air Flow Wheel Arbor  Air Inlet Tool Weight Length Height Number hp (W) RPM Level SCFM (LPM) Diameter Thread Thread Pound (kg) Inch (mm) Inch (mm)  13505 1 (744) 3,400 80 dB(A) 43 (1,218) 5/8"-11 Male  3/8" NPT 1/2"-20 Male 4.2 (1.9) 16-1/8 (409) 1-7/8 (48) 13506 1 (744) 3,400 80 dB(A) 43 (1,218) 5/8" or 1" 3/8" NPT 1/2"-20 Male 4.4 (2.0) 14-1/2 (369) 1-7/8 (48) 13512 1 (744) 3,400 80 dB(A) 43 (1,218) 1/2" 3/8" NPT – 4.4 (2.0) 18-1/2 (471) 1-7/8 (48) 13515 1 (744) 3,400 80 dB(A) 43 (1,218) 5/8"-11 Male 3/8" NPT – 4.1 (1.9) 18-5/8 (472) 1-7/8 (48) 13516 1 (744) 3,400 80 dB(A) 43 (1,218) 5/8" or 1" 3/8" NPT – 4.7 (2.1) 18-3/4 (475) 1-7/8 (48) Tune-Up Kit: No. 96532 (page 192)  • Additional Specifications: Hose I.D. Size 3/8" (10 mm)   • Air Pressure 90 PSIG (6.2 Bar)   Model 13505   13505 Dynastraight ®powers optional 94472 Dynacushion ®pneumatic wheel. 13515 Dynastraight   ®sets grain pattern in stainless steel.   Model 13505  3,400 RPM, 1 hp  • 13015 Threaded Arbor (5/8" -11) ideal for use with optional 94472 Dynacushion® pneumatic wheel (shown).  Model 13506  3,400 RPM, 1 hp  • 13071 Combo Arbor for up to 3" wide wheels with 5/8" or 1" diameter center hole. Any Dynacushion ® pneumatic wheel with 5/8" dia. bore (such as 92936) may be mounted.   Model 13512  3,400 RPM, 6" Extension, 1 hp  • 1/2" diameter arbor for up to 2" wide x 1/2" I.D. wheels. Any accessory with 1/2" diameter bore may be mounted.  • Ideal set-up for optional surface conditioning discs (shown).  • Cushioned grip enhances operator comfort.  Model 13515  3,400 RPM, 6" Extension, 1 hp  • Ideal set-up for optional Dynacushion ® wheel.  • Includes threaded arbor for exclusive use with up to 3-1/2" wide pneumatic wheels (wheel not included) with threaded 5/8"-11 center hole (such as 94472).  • Cushioned grip enhances operator comfort.  Model 13516  3,400 RPM, 6" Extension, 1 hp  • 13071 Combo Arbor, for up to 3" wide wheels with 5/8" or 1" diameter center hole.  • Any Dynacushion® pneumatic wheel with 5/8" dia. bore (such as 92936) may be mounted.  • Cushioned grip enhances operator comfort.   Avoid tipping the pneumatic wheel when operating. Best results will be achieved when keeping the pneumatic wheel as flat on the surface as possible.   RIGHT WRONG   Model 13512   Disc Sold Separately   Part Number 13015   Arbors   See page 186 for detailed arbor information.  Part Number 13071   Model 13515   Model 13505 Model 13515     32 Dynastraight ®   Air-Powered Abrasive Finishing Tool   For Material Removal on Stainless Steel, Aluminum, Carbon Steel, Composites   ABRASIVE FINISHING TOOLS   Model 13206  4,500 RPM, .7 hp  • 13016 Arbor for up to 2" wide x 1/2" I.D. wheels.  • Accessories with 1/2" dia. bore (maximum speed of 4,500 RPM) may be mounted.  Model 13207  4,500 RPM, .7 hp  • 13071 Combo Arbor, for up to 3" wide wheels with 5/8" or 1" dia. center hole.  • Accessories  with 5/8" dia. bore (maximum speed of 4,500 RPM) may be mounted.  Model 13214  4,500 RPM, .7 hp  • 13072 Threaded Arbor (5/8"-11), ideal for use with optional 92921 DynaWheel (5" dia. x 1" wide). See page 183.  Model 13507  4,500 RPM, 1 hp  • 13016 Arbor for up to 2" wide x 1/2" I.D. wheels.  Model 13508  4,500 RPM, 1 hp  • 13071 Combo Arbor for up to 3" wide wheels with 5/8" or 1" dia. center hole.  Model 13523  4,500 RPM, 1 hp  • 13072 Threaded Arbor (5/8"-11 male) for exclusive use with optional 92867 or 92868 DynaWheel (5" dia. x 1-1/2" wide). See page 182.   Model 13517  4,500 RPM, 6" Extension, 1 hp  • 1/2" diameter arbor for up to 2" wide x 1/2" I.D. wheels.  Model 13518  4,500 RPM, 6" Extension, 1 hp  • 13071 Combo Arbor, for up to 3" wide wheels with 5/8" or 1" dia. center hole.  Model 13520  4,500 RPM, 6" Extension, 1 hp  • Threaded arbor for use with up to 3-1/4" dia. pneumatic wheels with threaded 5/8"-11 center hole.  • Cushioned grip enhances comfort (all extension models).   ABRASIVE FINISHING TOOLS   PNEUMATIC WHEELS, CONDITIONING DISCS, FLAP WHEELS  Up to 8" (203 mm) diameter   Pneumatic Wheels: Page 182  • Abrasives: Page 208  • Accessories: Page 159   Model 13207   Models 13517, 13518 and 13520 are ideal for use with optional coated abrasive flap wheels (shown) and non-woven nylon wheels.  Left: Optional 92867 DynaWheel on 13523 Dynastraight   ® , for concentrated grinding and fast material removal.   Model 13518   Arbors   See page 186 for detailed arbor information.   Part Number 13016 Part Number  13071  Part Number  13072   Model 13523  Model 13523   Wheel Sold Separately   Model Motor Motor Sound Maximum Air Flow Wheel Arbor Air Inlet Tool Weight Length Height Number hp (W) RPM Level SCFM (LPM) Diameter Thread Thread Pound (kg) Inch (mm) Inch (mm)  13206 .7 (522) 4,500 82 dB(A) 40 (1,133) 1/2" 1/4" NPT 1/2"-20 Male 3.9 (1.8) 13-5/8 (346) 1-3/4 (44) 13207 .7 (522) 4,500 82 dB(A) 40 (1,333) 5/8" or 1" 1/4" NPT 1/2"-20 Male 4.0 (1.8) 13-5/8 (346) 1-3/4 (44) 13214 .7 (522) 4,500 82 dB(A) 40 (1,333) 5/8"-11 Male 1/4" NPT 1/2"-20 Male 4.0 (1.8) 13-5/8 (346) 1-3/4 (44) 13507 1 (744) 4,500 80 dB(A) 41 (1,161) 1/2" 3/8" NPT 1/2"-20 Male 4.3 (2.0) 15-1/8 (384) 1-7/8 (48) 13508 1 (744) 4,500 80 dB(A) 41 (1,161) 5/8" or 1" 3/8" NPT 1/2"-20 Male 4.4 (2.0) 15-1/2 (370) 1-7/8 (48) 13517 1 (744) 4,500 80 dB(A) 41 (1,161) 1/2" 3/8" NPT – 4.4 (2.0) 18-1/2 (471) 1-7/8 (48) 13518 1 (744) 4,500 80 dB(A) 41 (1,161) 5/8" or 1" 3/8" NPT – 4.7 (2.1) 18-3/4 (475) 1-7/8 (48) 13520 1 (744) 4,500 80 dB(A) 41 (1,161) 5/8"-11 Male 3/8" NPT – 4.4 (2.0) 18-5/8 (472) 1-7/8 (48) 13523 1 (744) 4,500 80 dB(A) 41 (1,161) 5/8"-11 Male 3/8" NPT 1/2"-20 Male 4.3 (2.0) 14-1/2 (366) 1-7/8 (48) Tune-Up Kit:.7 hp Model – No. 96260; 1 hp Model – No. 96532(page 192)  • Additional Specifications: Hose I.D. Size 3/8" (10 mm)   • Air Pressure 90 PSIG (6.2 Bar)     33  Dynastraight ® Kits Versatility Kits with Finishing Tool and DynaWheel   For Material Removal on Stainless Steel, Aluminum, Carbon Steel, Composites   ABRASIVE FINISHING TOOLSABRASIVE FINISHING TOOLS   Pneumatic Wheels: Page 182  • Abrasives: Page 208  • Accessories: Page 159   Model 13215 Model 13535   13215 Versatility Kit  • 13214 Dynastraight® (4,500 RPM), with 13072 Threaded Arbor (5/8”-11).  • 92921 DynaWheel (5" dia. x 1" wide), ideal for heavy-duty applications.  • 98091 “DynaPump” Air Pump, for quick inflation of pneumatic wheels.  • 89186 Coated Abrasive Belt (60 grit), 1" wide x 15-1/2" long.   13535 Versatility Kit  • 13523 Dynastraight® (4,500 RPM), with 13072 Threaded Arbor (5/8"-11).  • 92867 DynaWheel (5" dia. x 1-1/2" wide), ideal for heavy-duty applications.  • 98091 “DynaPump” Air Pump, for quick inflation of pneumatic wheels.  • Three 89182 Coated Abrasive Belts (60 grit), 1-1/2" wide x 15-1/2" long.   Dynastraight ® Kit Versatility Kit with Finishing Tool and Dynacushion ® Wheel   For Material Removal on Stainless Steel, Aluminum, Carbon Steel, Composites   13525 Versatility Kit  • 13505 Dynastraight® (3,400 RPM), with 13015 Threaded Arbor (5/8"-11).  • 94472 Dynacushion® (5" dia. x 3-1/2" wide), ideal for a variety of applications.  • 98091 “DynaPump” Air Pump, for quick inflation of pneumatic wheels.  • 89173 Coated Abrasive Belt (120 grit), 3-1/2" wide x 15-1/2" long.  • NEW 89174 Coated Abrasive Belt (180 grit), 3-1/2" wide x 15-1/2" long.  • 89242 Non-Woven Nylon Belt (medium), 3-1/2" wide x 15-1/2" long.   Model 13525   When using pneumatic wheels, inflate wheel only enough to hold the abrasive belt without slippage. Over-inflating the wheel can lead to “chatter marks” on the surface.   NEW! NEW!     34 Dynastraight ®   Air-Powered Abrasive Finishing Tool   For Material Removal on Stainless Steel, Aluminum, Carbon Steel, Composites   Model 13509  6,000 RPM, 1 hp  • 13071 Combo Arbor, for up to 3" wide wheels with 5/8" or 1" diameter center hole.  • Ideal for use with optional 94507 Dynacushion ®  Pneumatic Wheel (3-1/4" dia. x 3" wide x 5/8" bore).  Model 13519  6,000 RPM, 6" Extension, 1 hp  • Threaded arbor for use with up to 3-1/4" diameter pneumatic wheels with threaded 5/8"-11 center hole (such as 94508 Dynacushion ®).  • Cushioned grip enhances operator comfort.    Lightweight Dynastraight ®   Air-Powered Abrasive Finishing Tool   Tough, Lightweight Tool for Consistent Finishes   • All models include 13061 Multi-Purpose Arbor for mounting optional abrasive wheels 1/2" to 3" wide (1/2" increments) with 5/8" or 1" center hole.  Model 13100  950 RPM, .4 hp  • Accepts optional accessories with 5/8" bore.  • Also speed-mated for 8" dia. sanding stars. An ideal way to whitewood sand, sealer sand and defuzz.  Model 13101  3,200 RPM, .4 Hp  Model 13102  5,000 RPM, .4 Hp  • Ideal for 1/2" to 3" wide abrasive impregnated non-woven nylon wheels.  • Achieves smooth finishes on stainless steel and composites used in kitchen and bath industries.  • Mount Abrasive Belts with optional 94507 Dynacushion ®  Pneumatic Wheel (3-1/4" dia. x 3" wide x 5/8" bore). Models 13101 and 13102 only.   PNEUMATIC WHEELS, CONDITIONING DISCS, FLAP WHEELS  Up to 8" (203 mm) diameter   PNEUMATIC WHEELS, CONDITIONING DISCS, FLAP WHEELS  Up to 8" (203 mm) diameter   Pneumatic Wheels: Page 182  • Abrasives: Page 208  • Accessories: Page 159   Model Motor Motor Sound Maximum Air Flow Wheel Arbor  Air Inlet Tool Weight Length Height Number hp (W) RPM Level SCFM (LPM) Diameter Thread Thread Pound (kg) Inch (mm) Inch (mm)  13509 1 (744) 6,000 82 dB(A) 44 (1,256) 5/8" or 1" 3/8" NPT 1/2"-20 Male 4.3 (2.0) 14-1/2 (369) 1-7/8 (48) 13519 1 (744) 6,000 83 dB(A) 44 (1,256) 5/8"-11 Male 3/8" NPT N/A 4.4 (2.0) 18-5/8 (472) 1-7/8 (48) Tune-Up Kit: No. 96532 (page 192)  • Additional Specifications: Hose I.D. Size 3/8" (10 mm)   • Air Pressure 90 PSIG (6.2 Bar)   Model Motor Motor Sound Maximum Air Flow Wheel Arbor  Air Inlet Tool Weight Length Height Number hp (W) RPM Level SCFM (LPM) Diameter Thread Thread Pound (kg) Inch (mm) Inch (mm)  13100 .4 (298) 950 82 dB(A) 22 (623) 5/8" or 1" 1/4" NPT 3/8"-24 Male 2.2 (1.0) 13-1/4 (337) 1-5/8 (40) 13101 .4 (298) 3,200 81 dB(A) 22 (623) 5/8" or 1" 1/4" NPT 3/8"-24 Male 2.2 (1.0) 11-1/2 (292) 1-5/8 (40) 13102 .4 (298) 5,000 84 dB(A) 22 (623) 5/8" or 1" 1/4" NPT 3/8"-24 Male 2.2 (1.0) 11-1/2 (292) 1-5/8 (40) Tune-Up Kit: No. 96173 (page 192)  • Additional Specifications: Hose I.D. Size 1/4" (6 mm)   • Air Pressure 90 PSIG (6.2 Bar)   Model 13509 Model 13519   Many Dynastraight ® operators find that it is easier to achieve a straight-line pattern by moving the tool in a faster back-and-forth stroke.   13101 Dynastraight ®fitted with optional non-woven nylon wheel.   Model 13101   Wheels Sold Separately   ABRASIVE FINISHING TOOLSABRASIVE FINISHING TOOLS  Model 13101   Arbor   Part Number  13071   Arbor   Part Number  13061     35  Dynastraight ® Flapper Air-Powered Abrasive Finishing Tool   For Polishing Insides of Pipe and Tubing; Excellent for Light Deburring   • Remove rust, oxide and scale; clean welds, remove paint and surface condition using abrasive flap wheels.  • Adjustable speed, lever throttle, front exhaust.  Model 51130  18,000 RPM, .5 hp  • Includes 51029 Flap Wheel Adapter.  • Shown with optional 90831 abrasive flap wheel, 2-1/2" dia. x 1" wide.  Model 51301  18,000 RPM, .5 hp  • Includes 1/4" collet.   Model 51134  18,000 RPM, 8" Extension, .5 hp  • Includes 51116 Adapter.  • Shown with optional 90831 abrasive flap wheel, 2-1/2" dia. x 1" wide.  Model 53501  18,000 RPM, 8" Extension, .5 hp  • Includes 1/4" collet.   ABRASIVE FLAP WHEELS  Up to 3" (76 mm) diameter   Pneumatic Wheels: Page 182  • Abrasive Flap Wheels: Page 219  • Accessories: Page 159   Model  Motor Motor Sound Maximum Air Flow Hose I.D. Size Air Inlet Tool Weight Length Height Number hp (W) RPM Level SCFM (LPM) Inch (mm) Thread Thread Pound (kg) Inch (mm) Inch (mm)  51130 .5 (373) 18,000 81 dB(A) 30 (850) 3/8 (10) 1/4" NPT 3/8"-24 Male 1.8 (0.8) 7 (178) 1-3/4 (44) 51134 .5 (373) 18,000 75 dB(A) 30 (850) 3/8 (10) 1/4" NPT 3/8"-24 Male 3.4 (1.5) 17-1/8 (435) 1-7/8 (48) 51301 .5 (373) 18,000 81 dB(A) 24 (680) 3/8 (10) 1/4" NPT 3/8"-24 Male 1.5 (0.7) 7 (178) 1-7/8 (48) 53501 .5 (373) 18,000 75 dB(A) 30 (850) 3/8 (10) 1/4" NPT – 3.2 (1.5) 17-7/8 (454) 1-7/8 (48) Tune-Up Kit: No. 95600 (Extension Models – No. 96007) (page 192)  • Additional Specifications:  Air Pressure 90 PSIG (6.2 Bar)   IMPORTANT: Speed of tool must not exceed maximum operating speed of accessory. Always wear eye, face and body protection.   Model 51130 Model 51134 Model 13120   Lightweight Dynastraight ® Plus Air-Powered Abrasive Finishing Tool   Built-In Holder for 3M Roloc and Roloc+ Products   Model 13120  3,200 RPM, .4 hp  Model 13121  5,000 RPM, .4 hp  • Includes 51115  Roloc Adapter Assembly.  • Has built-in speed control, rear exhaust, lever throttle.  • Mount optional abrasive directly to tool.  • Accepts flap brushes and wheels, Cut ’n Polish wheels, Clean ’n Strip® wheels, coated abrasive discs, Scotch-Brite ® discs.   Model Motor Motor Sound Maximum Air Flow Hose I.D. Size Air Inlet Holder Weight Length Height Number hp (W) RPM Level SCFM (LPM) Inch (mm) Thread Thread Pound (kg) Inch (mm) Inch (mm)  13120 .4 (298) 3,200 81 dB(A) 22 (623) 3/8 (10) 1/4" NPT Female Roloc 1.8 (.8) 8-1/2 (216) 1-5/8 (40) 13121 .4 (298) 5,000 84 dB(A) 22 (623) 3/8 (10) 1/4" NPT Female Roloc 1.8 (.8) 8-1/2 (216) 1-5/8 (40) Tune-Up Kit: No. 96173 (page 192)  • Additional Specifications: Air Pressure 90 PSIG (6.2 Bar)   Roloc+, Roloc, Clean ’n Strip, and Scotch-Brite are registered trademarks of 3M Company.   Dynaswivel ®air line connector is ideal for use with most air tools. The Dynaswivel ®   improves tool maneuverability, minimizes operator fatigue and extends hose life. (See page 163.) Wheel Sold Separately Wheel Sold Separately  Wheel Sold Separately   ABRASIVE FINISHING TOOLSABRASIVE FINISHING TOOLS     36   ABRASIVE FINISHING TOOLSABRASIVE FINISHING TOOLS  DynaRover Air-Powered Abrasive Finishing Tool   Walk-Behind Tool Utilizes Dynastraight ® to Clean Weld Seam Corrosion and Various Surfaces   ABRASIVE FINISHING TOOLS   Dynabrade has engineered a walk-behind tool affixed with 6,000 RPM Dynastraight ® (sold separately) and 3M™ Scotch-Brite™ Bristle Brushes (sold separately), to effectively clean surfaces, such as removing corrosion from weld seams on ship decks.  Model 13340  • Use DynaRover in conjunction with model 13509 Dynastraight® (must be ordered separately).   • Attached multiple 3M™ Scotch-Brite™ Bristle Brushes (sold separately) for widths up to 4".  • 37" handle length with 45° angle foam grip provides ergonomic comfort.  • On/off airflow valve is easily accessible on the handle.  • Remove the Dynastraight® from the DynaRover to clean weld on vertical surfaces.   13370 Optional Vacuum Shroud  • Easily attachable vacuum shroud accessory allows operator to capture corrosion particulate. (Vacuum not included).  97355 Optional Weight Spindle  • Optional spindle above Dynastraight ® holds additional weight; helps to maintain contact with the weld surface. Weights not included.   ABRASIVE FINISHING TOOLS   BRISTLE BRUSHES  6" (152 mm) diameter, 36 Grit Available from 3M Company   Accessories: Page 159   Model 13340 (shown with optional 13509 Dynastraight® and optional weight spindle.)  97355   DynaRover cleaning a butt weld. (Shown with optional weight spindle.) DynaRover cleaning an angle weld. Weld seam cleaned with DynaRover. Operator places weights (sold separately) onto optional weight spindle of DynaRover.   For optimum use of DynaRover, 1/2" (13 mm) air inlet is required.   Maximize surface cleaning efficacy with 90 PSIG (6.2 Bar) air flow.   Scotch-Brite is a registered trademark of 3M Company.   Optional 13370 Vacuum Shroud   NEW! NEW!     37   Mini-Dynisher ®   Air-Powered Abrasive Finishing Tool   Achieves Superior In-Line Finishes on Metal   • Powers optional Dynacushion® pneumatic wheel. Finish virtually any shape, contour or material, including stainless steel, aluminum, carbon steel, copper, brass, plastic, fiberglass, composites, wood, etc.  Model 13301  950 RPM, .4 hp  • Ideal for use with optional 92938 Dynacushion ®  pneumatic wheel (5" dia. x 3-1/2" wide).  • Large shroud allows for up to 6" diameter accessories.  Model 13300  3,200 RPM, .4 hp  • Ideal for use with optional 94507 Dynacushion ®  pneumatic wheel (3-1/4" dia. x 3" wide).  • Shroud allows for up to 4-1/2" diameter accessories.  13310 Versatility Kit  • 13300 Mini-Dynisher®; 94507 Dynacushion® pneumatic wheel (3-1/4" dia. x 3" wide); 94465 Wheel Inflation Tool; ceramic coated aluminum oxide belt and medium grade non-woven nylon belt.   PNEUMATIC WHEELS  Up to 5" (127 mm) diameter   PNEUMATIC WHEEL  3-1/4" dia. x 7" long (83 mm dia. x 178 mm long)   Pneumatic Wheels: Page 182  • Abrasives: Page 208  • Accessories: Page 159   Model Motor Motor Sound Maximum Air Flow Wheel Arbor  Hose I.D. Air Inlet Weight Length Height Number hp (W) RPM Level SCFM (LPM) Diameter Size Thread Pound (kg) Inch (mm) Inch (mm)  13300 .4 (298) 3,200 80 dB(A) 21 (595) 5/8" 1/4 (6) 1/4" NPT 2.8 (1.3) 10 (254) 7 (178) 13301 .4 (298) 950 81 dB(A) 21 (595) 5/8" 1/4 (6) 1/4" NPT 3.4 (1.5) 10 (254) 7 (178) Tune-Up Kit: No. 96174 (page 192)  • Additional Specifications:  Air Pressure 90 PSIG (6.2 Bar)   Model 13300   Model 58050   Model 13310   Rolling Pin Sander Air-Powered Abrasive Finishing Tool   For Sanding and Finishing on Contoured Shapes   Model 58050  3,200 RPM, .4 hp  • Unique offset handle to control torque.  • Includes 94434 Pneumatic Wheel, 3-1/4" dia. x 7" long. Wheel inflates to 20 PSI max.  • Designed for use with coated abrasive and non-woven nylon belts.   Model Motor Motor Sound Maximum Air Flow Hose I.D. Size Air Inlet Tool Weight Length Height Number hp (W) RPM Level SCFM (LPM) Inch (mm) Thread Thread Pound (kg) Inch (mm) Inch (mm)  58050 .4 (298) 3,200 82 dB(A) 24 (668) 3/8 (10) 1/4" NPT 5/8"-11 male 5 (2.3) 17-3/4 (452) 3-1/4 (83) Tune-Up Kit: No. 96174 (page 192)  • Additional Specifications:  Air Pressure 90 PSIG (6.2 Bar)   Wheel conforms to wood and metal, and easily inflates/deflates for quick abrasive belt change.   13300 Mini-Dynisher ®  powers optional 94507 Dynacushion ®pneumatic wheel on stainless steel.   Model 58050   ABRASIVE FINISHING TOOLSABRASIVE FINISHING TOOLS   Model 58050     38 Dynisher ®   Air-Powered Abrasive Finishing Tool   Achieves Superior In-Line Finishes on Metal   Model 13400  3,400 RPM, .7 hp  • Excellent for blending and finishing stainless steel and other metals, leaving an in-line scratch pattern.  • Operator uses back-and-forth motion; guard can be adjusted for work right up to side walls.   • Arbor (3/4" dia.) included for mounting a variety of abrasives and accessories.  • Variable speed control and safety-lock lever throttle.  • Ideal for use with optional 92938 Dynacushion ® pneumatic wheel (5" dia. x 3-1/2" wide).  13410 Versatility Kit  • Includes 13400 Dynisher ® with 92938 Dynacushion®  pneumatic wheel (5" dia. x 3-1/2" wide), two abrasive belts and 94465 Inflation Tool.   Model 13401  3,400 RPM, .7 hp, Metric  • For use with optional 94495 Dynacushion ® pneumatic wheel (90 mm x 100 mm wide).  13411 Versatility Kit  Metric  • Includes 13401 Dynisher ® with 94495 Dynacushion®  pneumatic wheel (90 mm x 100 mm wide), two abrasive belts and 94465 Inflation Tool.   Model 13450  2,800 RPM, 1 hp  • Ideal set-up for optional 92938 Dynacushion ® pneumatic wheel.  • Great for refinishing stainless steel sinks, stainless steel kitchen countertops, etc.   • Slower speed achieves deeper and longer grain pattern in work surface.  13460 Versatility Kit  • Includes Model 13450 Dynisher ®; 92938 Dynacushion®  pneumatic wheel; 94465 Wheel Inflation Tool; 80-grit belt; medium-grade belt; 95541 Grease Gun; 95542 Grease and 95848 Gear Oil.   PNEUMATIC WHEELS, CONDITIONING DISCS, FLAP WHEELS  Up to 5" (127 mm) diameter   Pneumatic Wheels: Page 182  • Abrasives: Page 208  • Accessories: Page 159   Model Motor Motor Sound Maximum Air Flow Wheel Arbor Diameter Hose I.D. Size Air Inlet Weight Length Height Number hp (W) RPM Level SCFM (LPM) Inch (mm) Inch (mm) Thread Pound (kg) Inch (mm) Inch (mm)  13400 .7 (522) 3,400 84 dB(A) 41 (1,161) 3/4 (19) 3/8 (10) 1/4" NPT 4.5 (2.0) 13-1/2 (343) 9 (229) 13401 .7 (522) 3,400 84 dB(A) 41 (1,161) 3/4 (19) 3/8 (10) 1/4" NPT 4.5 (2.0) 13-1/2 (343) 9 (229) 13450 1 (744) 2,800 80 dB(A) 41 (1,161) 3/4 (19) 3/8 (10) 3/8" NPT 5.7 (2.6) 15 (381) 7 (180) Tune-Up Kit: .7 hp Models – No. 96234; 1 hp Model – No. 96532 (page 192)  • Additional Specifications:  Air Pressure 90 PSIG (6.2 Bar)   Model 13450   13450 Dynisher ®powers optional 92938 Dynacushion ®pneumatic wheel.   Model 13400   Model 13410   When using pneumatic wheels, inflate wheel only enough to hold the abrasive belt without slippage. Over-inflating the wheel can lead to “chatter marks” on the surface.   Wheel Sold Separately   ABRASIVE FINISHING TOOLSABRASIVE FINISHING TOOLSABRASIVE FINISHING TOOLSABRASIVE FINISHING TOOLS     39   ABRASIVE FINISHING TOOLSABRASIVE FINISHING TOOLS   C US   13415 Electric Dynisher ®fitted with optional 92938 Dynacushion ®   Pneumatic Wheel and coated abrasive belt. An ideal setup for achieving in-line scratch pattern on stainless steel.   Electric Dynisher ®   Electric-Powered Abrasive Finishing Tool   Achieves Superior In-Line Finishes on Metal   Model 13415  120 V (AC), 3,000 RPM  • Ideal for graining, blending, brushing and polishing. Utilized in a variety of industries, on stainless steel and other metals, as well as plastic, composites and more.   • Variable tool speed of 0-3,000 RPM. Operator can pre-select speed to suit each application.  • Electronic module maintains specified tool speed under load.  • Variable speed trigger allows operator to control speed from 0 to selected setting.  • Operator moves tool in easy front-to-back motion, for achieving in-line scratch pattern. Tool guard is adjustable for most efficient use.   • 5/8"-11 spindle and 3/4" arbor allow mounting of a variety of accessories and abrasives.  • Tool accepts optional 92938 Dynacushion ® Pneumatic Wheel (5" dia. x 3-1/2" wide) and Non-Woven Nylon Wheels. Great versatility!  • Strong 835-watt power output gets the job done fast!   PNEUMATIC WHEELS, CONDITIONING DISCS, FLAP WHEELS  Up to 5" (127 mm) diameter   Model 13415   Model 13415   Operator moves Electric Dynisher ®in easy front-to-back motion, with tool guard adjustable for optimum use. Pneumatic Wheel is optional.   Electric Motor Maximum Current Weight Length Height Dynisher® RPM Watts Out Voltage Amps Phase Frequency Pound (kg) Inch (mm) Inch (mm)  13415 0 - 3,000 835 120 V (AC) 9 1 60 Hz 8.4 (3.8) 18-3/8 (468) 8-1/4 (209)   When using pneumatic wheels, inflate wheel only enough to hold the abrasive belt without slippage. Over-inflating the wheel can lead to “chatter marks” on the surface.   Pneumatic Wheels: Page 182   • Abrasives: Page 208   • Accessories: Page 159   Model 13415   Wheel Sold Separately  120 V (AC)     40   52061 Basic Versatility Kit  • 52060 Dyninger with 1" dia. arbor.  • 93245 Six Coated Abrasive Stars (120 grit).  • 93251 Six Coated Abrasive Stars (320 grit).  • 52031 Abrasive Dressing Plate.  52062 Deluxe Versatility Kit  • 52060 Dyninger with 1" dia. arbor.  • 93245 Six Coated Abrasive Stars (120 grit).  • 93251 Six Coated Abrasive Stars (320 grit).  • 52031 Abrasive Dressing Plate.  • 80020 Dynamount® Tool Bench Mount.  • 95745 Speed Control.   Dyninger ®   Air-Powered Abrasive Finishing Tool   Sand, Defuzz, Blend, Scuff, Denib   Model 52060  950 RPM, .4 hp  • High torque air motor includes arbor (1" dia.) for mounting up to six coated abrasive stars, 8" diameter with 1" center hole (sold separately).  • Excellent for blending and scuffing sealer coatings on contours and flat surfaces. Whitewood sand raised panels, turnings, moldings and hard-to-reach areas.  • Defuzz wooden grid pattern panels and denibbing raised grain.    • Great for light deburring of metal.   ABRASIVE STARS  8" (203 mm) diameter   Abrasive Stars: Page 219  • Accessories: Page 159   Model Motor Motor Sound Maximum Air Flow Wheel Arbor Dia. Air Inlet Tool Weight Length Height Number hp (W) RPM Level SCFM (LPM) Inch (mm) Thread Thread Pound (kg) Inch (mm) Inch (mm)  52060 .4 (298) 200-950 82 dB(A) 22 (623) 5/8" or 1" 1/4" NPT 3/8"-24 Male 3.7 (1.7) 11-1/8 (283) 2-3/4 (70) Tune-Up Kit: No. 96173 (page 192)  • Additional Specifications:  Hose I.D. Size 1/4 (6 mm)   • Air Pressure 90 PSIG (6.2 Bar)   52060   Model 52061  Model 52062   Sanding Stars are ideal for work on intricate profiles.   For best performance of all sanding stars, prior to application  “dress” the abrasive tips against optional 52031 Stainless Steel Abrasive Dressing Plate or equivalent. Also, a piece of hardwood such as oak will do. Dressing will break the stiffness, or flex the abrasives, resulting in a more consistent finish.   Model 52060   Model 52060   Stars Sold Separately   ABRASIVE FINISHING TOOLSABRASIVE FINISHING TOOLSABRASIVE FINISHING TOOLSABRASIVE FINISHING TOOLS   Model 52060     41  Lightweight Dyninger ®   Air-Powered Abrasive Finishing Tool   Use with Spindle-Mount, Arbor-Mount and Eyelet Sanding Stars   • For whitewood/sealer sanding, light deburring of metal, or fabrication and finishing of composite surfaces.  • Excellent for use on wooden parts, moldings, raised panels and intricate profiles. Eliminates raised grain and removes loose fibers when whitewood sanding as well as scuffing sealer coats.  • Tool includes 94407 Air-Flow Control Dynaswivel ® fitting for maximum tool maneuverability and control.  Model 52050  0-3,200 RPM, .4 hp, 1/4" Collet  Model 52051  0-3,200 RPM, .4 hp, 6 mm Collet  • Mount 4" diameter spindle-mount abrasive sanding stars with 1/4" shank, or Eyelet Dy-Cut sanding stars. (Stars sold separately - see page 192.)   Model 52052  0-3,200 RPM, .4 hp, Arbor-Mount  • For running arbor-mount abrasive stars or Dynacushion ® wheel.  • Includes 12980 Arbor (1/2" diameter) for mounting up to five 4" diameter arbor-mount sanding stars (1/2" center hole). Arbor includes spacers to be used between the stars for added flexibility. (Stars sold separately, see page 192.)  • Tool includes 94407 Air-Flow Control Dynaswivel ® fitting for maximum tool maneuverability and control.   ABRASIVE STARS  3/4" to 4" diameter (19 mm to 102 mm dia.)   Abrasive Stars: Page 219  • Accessories: Page 159   Least Aggressive/Most Flexible Most Aggressive/Less Flexible   The grit and spacing of the stars determine sanding aggressiveness. We suggest exploring  various grit and spacing combinations.   NOTE: The rated RPM of a mounted sanding star is reduced when using flexible shafts. When using the flex shaft for finishing in side diameters, place the eyelet sanding star inside the workpiece, then start the tool.   Model Motor Motor Sound Maximum Air Flow Hose I.D. Size Air Inlet Tool Weight Length Height Number hp (W) RPM Level SCFM (LPM) Inch (mm) Thread Thread Pound (kg) Inch (mm) Inch (mm)  52050 .4 (298) 0-3,200 81 dB(A) 22 (623) 1/4 (6) 1/4" NPT 3/8"–24 male 2.2 (1.0) 9-1/4 (235) 1-5/8 (40) 52051 .4 (298) 0-3,200 81 dB(A) 22 (623) 1/4 (6) 1/4" NPT 3/8"–24 male 2.2 (1.0) 9-1/4 (235) 1-5/8 (40) 52052 .4 (298) 0-3,200 81 dB(A) 22 (623) 1/4 (6) 1/4" NPT 3/8"–24 male 2.2 (1.0) 8-3/4 (222) 1-5/8 (40) Tune-Up Kit: No. 96173 (page 192)  • Additional Specifications:  Air Pressure 90 PSIG (6.2 Bar)   Model 52050   52050 Lightweight Dyninger ®with optional spindle-mount stars.   Model 52052   52052 Lightweight Dyninger ®with single arbor-mount star attached.   Model 52050 Model 52052   Stars Sold Separately  Stars Sold Separately   ABRASIVE FINISHING TOOLSABRASIVE FINISHING TOOLS   Model 52052     42 Eyelet Sanding Stars and Mandrels Ideal for Deburring and Polishing Hard-to-Reach Areas   For Use with Lightweight Dyninger ®   • Eyelet sanding stars are available in the following diameters:  3/4", 1", 1-1/2", 2", 3" and 4".  • Use with Lightweight Dyninger models 52050 and 52051, and Die Grinder models. See chart below for maximum operating speeds.  • Excellent for wooden parts, moldings, raised panels and intricate profiles. Eliminates raised grain and removes loose fibers when whitewood sanding as well as scuffing sealer coats.  • Provides uniform, smooth surface for achieving the best top coats.  • Metalworking applications include setting in-line scratch on stainless steel.  • Polish and deburr inside diameters of pipe and tubing.   Mandrel Length Max. Operating Male  P/N Inch (mm) Speed Thread  93534 3 (76) 5,000 3-48  93533 7 (178) Flex 3,200 3-48 93548 3 (76) 5,000 8-32 93532 7 (178) Flex 3,200 8-32 93550 3 (76) 5,000 1/4"-20 93531 7 (178) Flex 3,200 1/4"-20 93550 3 (76) 5,000 1/4"-20 93531 7 (178) Flex 3,200 1/4"-20   CHOOSE EYELET STAR... ...THEN CHOOSE MANDREL  Diameter Grit Inch (mm) 80 120 150 180 220 320 400  3/4 (19) 93579 93580 93581 93582 93583 – – 1 (25) 93586 93587 93588 93589 93590 – – 1-1/2 (38) 93541 93542 93543 93544 93545 93546 93547 2 (51) 93551 93552 93553 93554 93555 93556 93557 3 (76) 93558 93559 93560 93561 93562 93563 93564 4 (102) 93565 93566 93567 93568 93569 ––   93550 3" Mandrel  93531 7" Flexible Shaft Mandrel   3" Eyelet Sanding Star easily enters pipe elbow using 7" long flexible mandrel. Sand and deburr inside small dia. pipe and other hard to reach areas with 3/4" – 1-1/2" stars. 1" Dia.  2" Dia.   3" Dia.   4" Dia.   The grit and spacing of the stars determine sanding aggressiveness. We suggest exploring  various grit and spacing combinations. NOTE: The rated RPM of a mounted sanding star is reduced when using flexible shafts. When using the flex shaft for finishing inside diameters, place the eyelet sanding star inside the workpiece, then start the tool.   ABRASIVE FINISHING TOOLSABRASIVE FINISHING TOOLSABRASIVE FINISHING TOOLSABRASIVE FINISHING TOOLS     43  Industrial DynaZip Industrial-Quality Surface Preparation Tool   Powers Wire Wheels and Eraser Wheels for Effective Material Removal   • Industrial DynaZip (3,500 RPM) delivers outstanding power and torque, accepting optional Wire Wheels (4" dia.) and optional Eraser Wheels (4" dia.), for countless material removal applications.  • Tool features three-position handle for the best in operator comfort.  • Fully adjustable wheel guard.  • Quick and easy change of accessories.   Model 13280  3,500 RPM, Wire Wheel  • Tool with wheel guard and handle. Also includes 92245 Wire Wheel (4" dia. x 3/4" wide) and 92284 Hub Assembly. (Hub Assembly includes bolt, hub shield, hub cushion and drive plates for mounting either Wire Wheel or Eraser Wheel.)  • Ideal for removing paint, seam sealer, rust proofing, surface rust and more.  • Tool duplicates sand-blasting effect without surface fatigue.   • DynaZip dramatically outperforms conventional spiral-wound wheels, with no clogging.   Model 13320  3,500 RPM, Eraser Wheel  • Tool with wheel guard and handle. Also includes 92255 Eraser Wheel (4" dia. x 1-3/16" wide) and 92284 Hub Assembly. (Hub Assembly includes bolt, hub shield, hub cushion and drive plates for mounting either Wire Wheel or Eraser Wheel.)  • Outstanding for removal of graphics, decals and two-sided adhesive tapes.  • DynaZip is effective for material removal on painted surfaces, with no damage to base paint.   WIRE WHEELS AND ERASER WHEELS  4" (102 mm) diameter   Wire Wheels: See page 185  • Eraser Wheels: See page 185    Model Motor Motor Wheel Dia. Sound Maximum Air Flow Hose I.D. Size Air Inlet Weight Length Height Number hp (W) RPM Inch (mm) Level SCFM (LPM) Inch (mm) Thread Pound (kg) Inch (mm) Inch (mm)  13280 .4 (298) 3,500 4 (102) 79 dB(A) 23 (765) 1/4 (6) 1/4" NPT 3.29 (14.63) 11.5 (293.3) 4.91 (124.7) 13320 .4 (298) 3,500 4 (102) 79 dB(A) 23 (765) 1/4 (6) 1/4" NPT 3.29 (14.63) 11.4 (290.5) 4.91 (124.7) Tune-Up Kit: No. 96174 (page 192)  • Additional Specifications:  Air Pressure 90 PSIG (6.2 Bar)   Dynaswivel ® air line connector is ideal for use with most air tools. The Dynaswivel ® improves tool maneuverability, minimizes operator fatigue and extends hose life. (See page 163.)   13280 DynaZip powers Wire Wheel to remove surface rust and weld spatter from a weld seam.   ABRASIVE FINISHING TOOLSABRASIVE FINISHING TOOLS   Model 13320   Model 13280   NEW! NEW!     Dynorbital-Spirit® ...................................... 46 HiVac Dynorbital-Spirit® .............................. 48 Mesh Abrasive Systems .............................. 49 Dynorbital® Supreme .................................. 50 Two-Hand Dynorbital® ................................ 52 11" Dia. Dynorbital® .................................. 53   Palm-Style Mini-Orbital .............................. 54 7° Offset Mini-Orbital ................................ 55 Angle-Head Mini-Dynorbital® ........................ 56 Right Angle Mini-Orbital .............................. 57 Electric Dynorbital® .................................... 58     45  Dynorbital-Spirit ® & Dynorbital ® Supreme Air-Powered Random Orbital Sanders   Innovation and Excellence Built Right In   RANDOM ORBITAL SANDERSRANDOM ORBITAL SANDERS   Sanding Pads: Page 164  • Abrasive Discs: Page 215   Throttle Lever  Lever recesses into housing grip when depressed, eliminating pressure-point on operator’s palm. Dynorbital-Spirit® lever is made from composite material to insulate against cold air. Lever is color- coded to designate tool orbit (see next page).   Speed Control  Dynorbital-Spirit® speed control allows “thumb-control” regulating of tool speed. Dynorbital Supreme® speed controls allow choice of “finger control” regulating, “recessed screwdriver control” regulating, or non-regulating.   Lip Seal Shroud  Shroud ensures proper tool performance and enhanced operator safety. Interchangeable Overskirt Shroud is also available for enhanced vacuum and wet sanding.   Lower Vibration Levels  Precision one-piece motor shaft and counterbalance. High-quality Double Row Pad Bearing, protected by unique “V Seal,” improves bearing life and ensures reduced vibration.   Comfortable Palm Grip  Resilient, vibration-absorbing grip is shaped to conform to the hand, for the best in operator comfort.   Perfectly Balanced Sanding Pad  The Best in the Industry!  Perfectly-balanced, weight-mated sanding pad with one-piece hub design. Dynabrade premium urethane pads offer smoother operating performance and minimal vibration. 3-1/2" (89 mm) – 80 grams 5" (127 mm) – 100 grams 6" (152 mm) – 130 grams   High-Quality Air Motors  Dynorbital-Spirit® offers lighter air motor assembly, ideal for vertical and overhead sanding applications. Dynorbital Supreme® offers the most robust air motor design, best for horizontal sanding applications.   Easy Maintenance and Vacuum Conversion  Muffler elements are easily changed for convenient maintenance. Convert non- vacuum model to vacuum with simple addition of optional vacuum components.   Low Sound Levels  Muffling system reduces exhaust sound levels to as low as 76 dB(A).     46 Dynorbital-Spirit ®   Air-Powered Random Orbital Sander   The Finest in Random Orbital Sanding Innovation   RANDOM ORBITAL SANDERSRANDOM ORBITAL SANDERS   ABRASIVE DISCS   3" (76 mm), 3-1/2" (89 mm), 5" (127 mm) and 6" (152 mm) diameter   Sanding Pads: Page 164  • Drop-In Motors: Page 190  • Abrasive Discs: Page 215   Additional Specifications: Motor .25 hp (186 W)   • Motor 12,000 RPM  • Thread 5/16"-24 Female • Air Inlet Thread 1/4" NPT Hose I.D. Size 1/4" (6 mm)   • Air Flow Rate 14 SCFM/396 LPM   • Height 3-1/2" (89 mm)  • Air Pressure 90 PSIG (6.2 Bar) Tune-Up Kit: No. 96510 (page 192)   Model Vacuum Tool Dia. Dia. Orbit  Sound Weight Length Number Style Inch (mm) Inch (mm) Level Pound (kg) Inch (mm)  59000 Non-Vac 3-1/2 (89) 3/8 (10) 78 dB(A) 1.4 (0.6) 6 (152) 59005 Non-Vac 5 (127) 3/8 (10) 82 dB(A) 1.5 (0.7) 6-1/2 (165) 59010 Non-Vac 6 (152) 3/8 (10) 82 dB(A) 1.6 (0.7) 7 (178) 59015 Non-Vac 3-1/2 (89) 3/16 (5) 80 dB(A) 1.4 (0.6) 6 (152) 59020 Non-Vac 5 (127) 3/16 (5) 80 dB(A) 1.4 (0.6) 6-1/2 (165) 59025 Non-Vac 6 (152) 3/16 (5) 81 dB(A) 1.5 (0.7) 7 (178) 59030 Non-Vac 3-1/2 (89) 3/32 (2) 80 dB(A) 1.4 (0.6) 6 (152) 59035 Non-Vac 5 (127) 3/32 (2) 79 dB(A) 1.4 (0.6) 6-1/2 (165) 59040 Non-Vac 6 (152) 3/32 (2) 80 dB(A) 1.5 (0.6) 7 (178) 59100 Non-Vac 3 (76) 3/8 (10) 78 dB(A) 1.4 (0.6) 6 (152) 59105 Non-Vac 3 (76) 3/16 (5) 80 dB(A) 1.4 (0.6) 6-1/2 (165) 59110 Non-Vac 3 (76) 3/32 (2) 79 dB(A) 1.3 (0.6) 7 (178) 59003 Self-Gen 3-1/2 (89) 3/8 (10) 87 dB(A) 1.5 (0.7) 8-1/2 (216) 59008 Self-Gen 5 (127) 3/8 (10) 87 dB(A) 1.6 (0.7) 8-1/2 (216) 59013 Self-Gen 6 (152) 3/8 (10) 86 dB(A) 1.7 (0.7) 9 (229) 59018 Self-Gen 3-1/2 (89) 3/16 (5) 87 dB(A) 1.4 (0.6) 8-1/2 (216) 59023 Self-Gen 5 (127) 3/16 (5) 85 dB(A) 1.5 (0.7) 8-1/2 (216) 59028 Self-Gen 6 (152) 3/16 (5) 86 dB(A) 1.6 (0.7) 9 (229)   Model Vacuum Tool Dia. Dia. Orbit  Sound Weight Length Number Style Inch (mm) Inch (mm) Level Pound (kg) Inch (mm)  59033 Self-Gen 3-1/2 (89) 3/32 (2) 87 dB(A) 1.4 (0.6) 8-1/2 (216) 59038 Self-Gen 5 (127) 3/32 (2) 84 dB(A) 1.5 (0.6) 8-1/2 (216) 59043 Self-Gen 6 (152) 3/32 (2) 86 dB(A) 1.5 (0.7) 9 (229) 59103 Self-Gen 3 (76) 3/8 (10) 87 dB(A) 1.5 (0.6) 8-1/2 (216) 59108 Self-Gen 3 (76) 3/16 (5) 87 dB(A) 1.4 (0.6) 8-1/2 (216) 59113 Self-Gen 3 (76) 3/32 (2) 87 dB(A) 1.4 (0.6) 9 (229) 59004 Central 3-1/2 (89) 3/8 (10) 78 dB(A) 1.5 (0.7)   7 (178) 59009 Central 5 (127) 3/8 (10) 82 dB(A) 1.5 (0.7) 7-1/4 (184) 59014 Central 6 (152) 3/8 (10) 83 dB(A) 1.6 (0.7) 7-3/4 (197) 59019 Central 3-1/2 (89) 3/16 (5) 80 dB(A) 1.4 (0.6) 7 (178) 59024 Central 5 (127) 3/16 (5) 81 dB(A) 1.5 (0.6) 7-1/4 (184) 59029 Central 6 (152) 3/16 (5) 82 dB(A) 1.6 (0.7) 7-3/4 (197) 59034 Central 3-1/2 (89) 3/32 (2) 80 dB(A) 1.4 (0.6) 7 (178) 59039 Central 5 (127) 3/32 (2) 81 dB(A) 1.4 (0.6) 7-1/4 (184) 59044 Central 6 (152) 3/32 (2) 81 dB(A) 1.5 (0.7) 7-3/4 (197) 59104 Central 3 (76) 3/8 (10) 78 dB(A) 1.5 (0.6) 7 (178) 59109 Central 3 (76) 3/16 (5) 80 dB(A) 1.4 (0.6) 7-1/4 (184) 59114 Central 3 (76) 3/32 (2) 80 dB(A) 1.4 (0.6) 7-3/4 (197)   Drop-In Motor  • Less repair tools needed to repair and maintain the tool.  • Quick in-house repair lessens downtime.  • Average repair time now less than five minutes.  • See page 190.   • Black lever identifies 3/32" (2.5 mm) dia. orbit, used for ultra-fine sanding.   • Grey lever identifies 3/16" (5 mm) dia. orbit, used for general sanding.   • Blue lever identifies 3/8" (10 mm) dia. orbit, used for aggressive sanding.   Color-Coded Levers Quickly Identify your Choice of Three Different Orbits   EASY TO INSTALL!   NEW! Comfort Platform   Now included on all palm-style Dynorbital-Spirit ®  and Dynorbital ® Supreme Random Orbital Sanders!  • New Comfort Platform provides additional hand and wrist support, further enhancing operator comfort. Also offers increased protection against cold air exhaust. (NOTE: Comfort Platform is removable.)  • Comfort Platform also included on Dynabug ® II! (See page 70.)  Order 59330 Comfort Platform separately, to install on existing tools!   More Power  • True 12,000 RPM air motor. Floating rotor  utilizes five blades, producing more usable  power (.25 hp/186 W). High-strength, composite rotor has better lubricating qualities,  allowing blades to last longer. Less air (14 SCFM/ 396 LPM) is used more efficiently to maintain maximum power.   Patent Pending     47  Dynorbital-Spirit ®   Air-Powered Random Orbital Sander   Hundreds of Industrial Applications  RANDOM ORBITAL SANDERSRANDOM ORBITAL SANDERS   ABRASIVE DISCS   3" (76 mm), 3-1/2" (89 mm), 5" (127 mm) and 6" (152 mm) diameter   Sanding Pads: Page 164  • Drop-In Motors: Page 190  • Abrasive Discs: Page 215   For efficient random orbital sanding and uniform finish, move the tool in “north-to-south” pattern, then change to “east-to-west” pattern. Be sure to sand complete surface in each pattern. Remember the rule of “start ON, stop OFF.” Place the tool ON the work surface before starting it, and move running tool OFF the surface before stopping it. This will help to prevent unwanted swirl marks.   Non-Vacuum   • Includes low profile, premium urethane weight-mated sanding pad.  • Optional vacuum conversion kits are available to easily convert  non-vacuum tool to self-generated vacuum tool or central vacuum tool (see page 155).   Pad Diameter 3/8" Orbit 3/16" Orbit 3/32" Orbit Inch (mm) Models Models Models  3 (76 mm) 59100 59105 59110 3-1/2 (89 mm) 59000 59015 59030 5 (127 mm) 59005 59020 59035 6 (152 mm) 59010 59025 59040   Self-Generated Vacuum  • Includes low profile, premium urethane weight-mated sanding pad.  • Ready for connection to optional portable self-contained dust collection system (50617 shown; see page 156).   Pad Diameter 3/8" Orbit 3/16" Orbit 3/32" Orbit Inch (mm) Models Models Models  3 (76 mm) 59103 59108 59113 3-1/2 (89 mm) 59003 59018 59033 5 (127 mm) 59008 59023 59038 6 (152 mm) 59013 59028 59043   Central Vacuum  • Includes low profile, premium urethane weight-mated sanding pad.  • Has 1" (25 mm) outside diameter vacuum port, for easy connection to central vacuum system.   Pad Diameter 3/8" Orbit 3/16" Orbit 3/32" Orbit Inch (mm) Models Models Models  3 (76 mm) 59104 59109 59114 3-1/2 (89 mm) 59004 59019 59034 5 (127 mm) 59009 59024 59039 6 (152 mm) 59014 59029 59044   Model 59020   See page 164 for Dynabrade High Quality Sanding Pads!   Model 59023 50617 (See page 156) Model 59024   Start  End  3/8" (10 mm) Dia. Orbit  For Aggressive Sanding   3/16" (5 mm) Dia. Orbit  For General Sanding   3/32" (2.5 mm) Dia. Orbit  For Ultra-Fine Sanding     48   RANDOM ORBITAL SANDERSRANDOM ORBITAL SANDERS   Sanding Pads: Page 164  • Drop-In Motors: Page 190  • Abrasive Discs: Page 216   HiVac Dynorbital-Spirit ®   Air-Powered 3" Diameter Random Orbital Sander   Small Tool with Big Power and Vacuum Capability   • 3" diameter HiVac Dynorbital-Spirit ® efficiently vacuums through 3-hole sanding pad and unique shroud design.  • Ergonomically designed to the highest standards of Dynabrade technology.  • Sanding pad is weight-mated to tool, ensuring low vibration and smooth finishes.  • Tool weight of 1.3 pounds (0.6 kg) minimizes operator fatigue.  • Innovative “V-Seal” protects double row balancer bearing from sanding residue for longer tool life.  • Unique “Top Hat” seal protects front motor bearing from contaminants while maintaining bearing lubrication.   Self-Generated Vacuum  Vacuums directly through the tool’s exhaust, with 1" vacuum port connected to optional portable dust collection system. Includes 56144 Vacuum Sanding Pad (3 holes, medium density hook-face). Pad accepts 3" diameter hook-face or mesh-style abrasive discs (sold separately).  Model 59116  3/32" Orbit  Model 59115 with 3/16" orbit is also available.   ABRASIVE DISCS   3" (76 mm) diameter   Model Orbit Dia. Motor Motor Sound Max. Air Flow Spindle Hose I.D. Size Air Inlet Weight Length Height    Number Inch (mm) hp (W) RPM Level SCFM (LPM) Thread Inch (mm) Thread lb (kg) Inch (mm) Inch (mm)  59115 3/16" (5) .25 (186) 12,000 83.7 d(B)A 14 (396) 5/16"-24 1/4 (8) 1/4" NPT 1.3 (0.6) 7-3/4 (197) 3-3/4 (95) 59116 3/32" (2) .25 (186) 12,000 83.7 d(B)A 14 (396) 5/16"-24 1/4 (8) 1/4" NPT 1.3 (0.6) 7-3/4 (197) 3-3/4 (95) 59117 3/16" (5) .25 (186) 12,000 81.8 d(B)A 14 (396) 5/16"-24 1/4 (8) 1/4" NPT 1.3 (0.6) 6-1/2 (166) 3-3/4 (95) 59118 3/32" (2) .25 (186) 12,000 81.8 d(B)A 14 (396) 5/16"-24 1/4 (8) 1/4" NPT 1.3 (0.6) 6-1/2 (166) 3-3/4 (95) Tune-Up Kit: No. 96510 (page 192)  • Additional Specifications: Air Pressure 90 PSIG (6.2 Bar)    Model 59116 Model 59118   Model 59116 56144 Vacuum Pad (All HiVac models)   Central Vacuum  1" (25 mm) outside diameter vacuum port connects to an external vacuum source, such as a portable vacuum or central vac system. Includes 56144 Vacuum Sanding Pad (3 holes, medium density hook-face). Pad accepts 3" (76 mm) diameter hook-face or mesh- style abrasive discs (sold separately).  Model 59118  3/32" Orbit  Model 59117 with 3/16" orbit is also available.   3/32" (2.5 mm) Dia. Orbit  (Models pictured)   HiVac Dynorbital-Spirit ® powers 3" diameter sanding pad.   50617 (See page 156)   NEW! NEW!     49   RANDOM ORBITAL SANDERSRANDOM ORBITAL SANDERS   Sanding Pads: Page 164   Mesh Abrasive Systems For Use with Random Orbital Sanders   Includes Unique Sanding Pad for Mesh-Style Abrasive Discs   MESH ABRASIVE DISCS   3", 5", 6", 8" diameter (76 mm, 127 mm, 152 mm, 203 mm)   56320  Model 58054  5911656144 54288 59028 58411 54288 56322  54288 56321   3" HiVac Dynorbital-Spirit ®Mesh Abrasive System  Model 59119  • Includes 59116 HiVac Dynorbital-Spirit ® (3" dia., 3/32" dia. orbit, Self-Generated Vacuum), 56144 Vacuum Pad (3" dia., short hook-face, medium density), “bag-in-bag” vacuum system, extra disposable vacuum bags and scratch-proof belt strap.   Model 58052   Model Orbit Dia. Motor Motor Max. Air Flow Spindle Air Pressure Hose I.D. Size Air Inlet Weight Length Height    Number Inch (mm) hp (W) RPM SCFM (LPM) Thread PSIG (Bar) Inch (mm) Thread lb (kg) Inch (mm) Inch (mm)  58054 3/16" (5) .25 (186) 12,000 14 (396) 5/16"-24 90 (6.2) 1/4 (8) 1/4" NPT 1.3 (0.6) 8-1/2 (216) 3-1/2 (89) Tune-Up Kit: No. 96510 (page 192)   6" Dynorbital-Spirit ®Mesh Abrasive System  Model 58053  • Includes 59028 Dynorbital-Spirit® (6" dia., 3/16" dia. orbit, Self-Generated Vacuum), 56321 Vacuum Pad (6" dia., 52-hole, hook-face, medium density), “bag-in-bag” vacuum system, extra disposable vacuum bags and scratch-proof belt strap.   5" Dynorbital-Spirit ®Mesh Abrasive System  Model 58052  • Includes 58054 Dynorbital-Spirit® (5" dia., 3/16" dia. orbit, Self-Generated Vacuum) with 56320 Pad (5" dia., 44-hole, hook-face, medium density), “bag-in-bag” vacuum system, extra disposable vacuum bags and scratch-proof belt strap.  Model 58054  • Dynorbital-Spirit® (5" dia., 3/16" dia. orbit, Self-Generated Vacuum) with 56320 Pad.   8" Two-Hand Dynorbital ®  Mesh Abrasive System  Model 58412  • Includes 58411 Two-Hand Dynorbital ®  (8" dia., 3/16" dia. orbit, Self-Generated Vacuum), 56322 Vacuum Pad (8" dia., 48-hole, short hook-face, medium density) and“Bag-in-Bag” Vacuum System.   Model 58052   NEW! NEW!     50 Dynorbital ® Supreme Air-Powered Random Orbital Sander   The Tradition of Random Orbital Sanding Excellence Continues   ABRASIVE DISCS   3-1/2" (89 mm), 5" (127 mm) and 6" (152 mm) diameter   Sanding Pads: Page 164  • Abrasive Discs: Page 215   More Power  • All Dynorbital® Supreme models run at 12,000 RPM.  • Rotor utilizes five blades and produces more useable power. Composite rotor is stronger and has better lubricating qualities, enabling blades to last longer.   Less Vibration  • Composite base has integrated rubber over-mold creating a non-slip feel, as well as insulating from cold.  • The air motor is suspended by vibration-absorbing rubber rings (Patent No. 5,319,888) to minimize vibration.  Triple-Sealed Balancer Bearing  • Triple-sealed front double row balancer bearing (Patent No. 4,854,085) is guarded from sanding residue for long life and lower maintenance; easy replacement using 57098 Repair Kit.  Anti-Clog Vacuum Design  • Anti-clog design (Patent No. 5,319,888) enhances the vacuum pick-up on self-generated and central vacuum models. Dust particles are directed away from the air motor (reducing contamination) following a smoother, easier path of extraction.   Model Motor Motor Vacuum Tool Dia. Dia. Orbit  Sound Air Flow Rate Weight Length Height Number hp (W) RPM Style Inch (mm) Inch (mm) Level SCFM (LPM) Pound (kg) Inch (mm) Inch (mm)  56800 .28 (209) 12,000 Non-Vac 3-1/2 (89) 3/16" (5) 76 dB(A) 18 (510) 2.1 (1.0) 6 (152) 3-3/4 (95) 56815 .28 (209) 12,000 Non-Vac 5 (127) 3/16" (5) 78 dB(A) 18 (510) 2.1 (1.0) 6-1/2 (165) 3-5/8 (92) 56826 .28 (209) 12,000 Non-Vac 6 (152) 3/16" (5) 79 dB(A) 18 (510) 2.2 (1.0) 7 (178) 3-1/2 (89) 56840 .28 (209) 12,000 Non-Vac 3-1/2 (89) 3/32" (2) 76 dB(A) 18 (510) 2.1 (1.0) 6 (152) 3-3/4 (95) 56850 .28 (209) 12,000 Non-Vac 5 (127) 3/32" (2) 78 dB(A) 18 (510) 2.1 (1.0) 6-1/2 (165) 3-5/8 (92) 56859 .28 (209) 12,000 Non-Vac 6 (152) 3/32" (2) 79 dB(A) 18 (510) 2.2 (1.0) 7 (178) 3-1/2 (89) 56803 .28 (209) 12,000 Self-Gen 3-1/2 (89) 3/16" (5) 83 dB(A) 18 (510) 2.1 (1.0) 8-1/4 (210) 3-3/4 (95) 56818 .28 (209) 12,000 Self-Gen 5 (127) 3/16" (5) 81 dB(A) 18 (510) 2.1 (1.0) 8-1/2 (216) 3-5/8 (92) 56829 .28 (209) 12,000 Self-Gen 6 (152) 3/16" (5) 79 dB(A) 18 (510) 2.2 (1.0) 9 (229) 3-1/2 (89) 56843 .28 (209) 12,000 Self-Gen 3-1/2 (89) 3/32" (2) 83 dB(A) 18 (510) 2.1 (1.0) 8-1/4 (210) 3-3/4 (95) 56853 .28 (209) 12,000 Self-Gen 5 (127) 3/32" (2) 81 dB(A) 18 (510) 2.1 (1.0) 8-1/2 (216) 3-5/8 (92) 56862 .28 (209) 12,000 Self-Gen 6 (152) 3/32" (2) 79 dB(A) 18 (510) 2.2 (1.0) 9 (229) 3-1/2 (89) 56804 .28 (209) 12,000 Central 3-1/2 (89) 3/16" (5) 76 dB(A) 18 (510) 2.1 (1.0) 7 (178) 3-3/4 (95) 56819 .28 (209) 12,000 Central 5 (127) 3/16" (5) 78 dB(A) 18 (510) 2.2 (1.0) 7-1/4 (184) 3-5/8 (92) 56830 .28 (209) 12,000 Central 6 (152) 3/16" (5) 79 dB(A) 18 (510) 2.2 (1.0) 7-3/4 (197) 3-1/2 (89) 56844 .28 (209) 12,000 Central 3-1/2 (89) 3/32" (2) 76 dB(A) 18 (510) 2.1 (1.0) 7 (178) 3-3/4 (95) 56854 .28 (209) 12,000 Central 5 (127) 3/32" (2) 78 dB(A) 18 (510) 2.2 (1.0) 7-1/4 (184) 3-5/8 (92) 56863 .28 (209) 12,000 Central 6 (152) 3/32" (2) 79 dB(A) 18 (510) 2.2 (1.0) 7-3/4 (197) 3-1/2 (89) Additional Specifications for All Models: Air Inlet Thread 1/4" NPT   • Hose I.D. Size 1/4" (6 mm)   • Thread 5/16"-24 Female  • Air Pressure 90 PSIG (6.2 Bar) Tune-Up Kit: No. 96024 (page 192)   Remember the rule of “start ON, stop OFF.” Place the tool ON the work surface before starting it, and move running tool OFF the surface before stopping it. This will help to prevent unwanted swirl marks.   NEW! Comfort Platform   Now included on all palm-style Dynorbital-Spirit ®  and Dynorbital ® Supreme Random Orbital Sanders!  • New Comfort Platform provides additional hand and wrist support, further enhancing operator comfort. Also offers increased protection against cold air exhaust. (NOTE: Comfort Platform is removable.)  • Comfort Platform also included on Dynabug ® II! (See page 70.)  Order 59330 Comfort Platform separately, to install on existing tools!   Model 56818   Patent Pending   RANDOM ORBITAL SANDERSRANDOM ORBITAL SANDERS   Model 56818     51  Dynorbital ® Supreme Air-Powered Random Orbital Sander   The Tradition of Random Orbital Sanding Excellence Continues   ABRASIVE DISCS   3-1/2" (89 mm), 5" (127 mm) and 6" (152 mm) diameter   Sanding Pads: Page 164  • Abrasive Discs: Page 215   Non-Vacuum  • Includes low profile, premium urethane weight-mated sanding pad.  • Optional vacuum conversion kits available, to easily convert non-vacuum tool to self-generated vacuum tool or central vacuum tool (see page 155).    Pad Diameter 3/16" Orbit 3/32" Orbit Inch (mm) Models Models  3-1/2" (89 mm) 56800 56840 5" (127 mm) 56815 56850 6" (152 mm) 56826 56859   Self-Generated Vacuum  • Includes low profile, premium urethane weight-mated sanding pad.  • Ready for connection to optional portable self-contained dust collection system (50617 shown; see page 156).   Pad Diameter 3/16"  Orbit 3/32" Orbit Inch (mm) Models Models  3-1/2" (89 mm) 56803 56843 5" (127 mm) 56818 56853 6" 152 mm) 56829 56862   Central Vacuum  • Includes low profile, premium urethane weight-mated sanding pad.  • Has 1" outside diameter vacuum port, for easy connection to central vacuum system.   Pad Diameter 3/16" Orbit 3/32" Orbit Inch (mm) Models Models  3-1/2" (89 mm) 56804 56844 5" (127 mm) 56819 56854 6" (152 mm) 56830 56863   Start  End 3/16" (5 mm) Dia. Orbit  For General Sanding   3/32" (2.5 mm) Dia. Orbit  For Ultra-Fine Sanding   For efficient random orbital sanding and uniform finish, move the tool in “north-to-south” pattern, then change to “east-to-west” pattern. Be sure to sand complete surface in each pattern. Remember the rule of “start ON, stop OFF.” Place the tool ON the work surface before starting it, and move running tool OFF the surface before stopping it. This will help to prevent unwanted swirl marks.   Model 56815 Model 56818 Model 56819   See page 164 for Dynabrade High Quality Sanding Pads!   RANDOM ORBITAL SANDERSRANDOM ORBITAL SANDERS   50617 (See page 156)     52 Two-Hand Dynorbital ®   Air-Powered Random Orbital Sander   For Comfortable, Controlled Two-Hand Operation   ABRASIVE DISCS  5" (127 mm), 6" (152 mm) and 8" (203 mm) diameter   Sanding Pads: Page 164  • Abrasive Discs: Page 215   Model 58405 Model 58406   Non-Vacuum  • 5" and 6" models are 12,000 RPM. Pads have 5/16"-24 male spindle.  • 8" models are 10,000 RPM. Pads mount with 5 screws.   Pad Diameter 3/16" Orbit 3/8" Orbit Inch (mm) Models Models  5 (127) 58400 58415 6 (152) 58405 58418 8 (203) 58410 –   Self-Generated Vacuum  • Self-generated vacuum models are ready for connection to optional portable dust collection system (54218 shown, see page 156).  • Vacuum port accepts 1-1/4" diameter hose cuff for increased vacuum flow (no overskirt shroud is included).  • Not recommended for use with external or central vacuum system.   Pad Diameter 3/16" Orbit 3/8" Orbit Inch (mm) Models Models  5 (127) 58401 58416 6 (152) 58406 58419 8 (203) 58411 –   Model Motor Motor Pad Dia. Sound Maximum Air Flow Hose I.D. Size Air Inlet Weight Length Height Number hp (W) RPM Inch (mm) Level SCFM (LPM) Inch (mm) Thread Pound (kg) Inch (mm) Inch (mm)  58400/58415 .45 (336) 12,000 5 (127) 81 dB(A) 23 (651) 1/4 (6) 1/4" NPT 2.5 (1.2) 11-1/16 (280) 4-15/16 (126) 58401/58416 .45 (336) 12,000 5 (127) 84 dB(A) 23 (651) 1/4 (6) 1/4" NPT 2.5 (1.1) 11-1/16 (280) 4-15/16 (126) 58405/58418 .45 (336) 12,000 6 (152) 81 dB(A) 23 (651) 1/4 (6) 1/4" NPT 2.6 (1.2) 11-3/8 (288) 4-15/16 (126) 58406/58419 .45 (336) 12,000 6 (152) 83 dB(A) 23 (651) 1/4 (6) 1/4" NPT 2.5 (1.2) 11-3/8 (288) 4-15/16 (126) 58409/58420 .45 (336) 12,000 6 (152) 83 dB(A) 23 (651) 1/4 (6) 1/4" NPT 2.7 (1.2) 11-3/8 (288) 4-15/16 (126) 58410 .45 (336) 10,000 8 (203) 81 dB(A) 23 (651) 1/4 (6) 1/4" NPT 4.0 (1.8) 12-1/2 (319) 5-5/8 (142) 58411 .45 (336) 10,000 8 (203) 85 dB(A) 23 (651) 1/4 (6) 1/4" NPT 4.0 (1.8) 12-1/2 (319) 5-5/8 (142) 58414 .45 (336) 10,000 8 (203) 84 dB(A) 23 (651) 1/4 (6) 1/4" NPT 4.2 (1.9) 12-1/2 (319) 5-5/8 (142)  Additional Specifications: Air Pressure 90 PSIG (6.2 Bar)   • Thread 5/16"-24 Female  • 8" models mount with 5 screws Tune-Up Kit: 5", 6" Models: No. 98220 (page 192); 8" Models: No. 98221 (page 192)   Central Vacuum  • Ready for connection to external or central vacuum system.  • All models include combination lip seal/overskirt shroud, for enhanced vacuum capability and greater workpiece visibility.  • 6" diameter models include 1" outside diameter vacuum port.  • 8" diameter model includes 2" outside diameter vacuum port.   Pad Diameter 3/16" Orbit 3/8" Orbit Inch (mm) Models Models  6 (152) 58409 58420 8 (203) 58414 –   Model 58414 2" outside diameter vacuum port (58414 only).   1-1/4" outside dia. vacuum port.   • Long handle provides excellent comfort and control, especially when working on vertical sides of workpiece.  • All models include premium urethane weight-mated sanding pad.   3/16" (5 mm) Dia. Orbit  For General Sanding   3/8" (10 mm) Dia. Orbit  For Aggressive Sanding   RANDOM ORBITAL SANDERSRANDOM ORBITAL SANDERS   54218 (See page 156)     53  Two-Hand Dynorbital ®   Air-Powered Random Orbital Sander   For Comfortable, Controlled Two-Hand Operation   ABRASIVE DISCS  5" (127 mm) diameter   Sanding Pads: Page 164  • Abrasive Discs: Page 215   11" Diameter Dynorbital  ®   Air-Powered Random Orbital Sander   Large Diameter Sanders Cover More Area in Less Time   ABRASIVE DISCS  11-1/4" (286 mm) diameter   Model 58480  Non-Vacuum  • For use with optional non-vacuum abrasive discs. Abrasive disc covers pad holes, for non-vacuum use.   • Powerful .7 hp air motor (2,500 RPM) offers power and efficiency.  • Proportionate 3/4" dia. orbit in relation to pad size assures swirl-free finish on a variety of surfaces.  • Both models include 56231 Hook-Face Sanding Pad, for abrasive discs 11-1/4" in diameter. Pad is weight-mated to tool, further reducing tool vibration levels.   • Tools include reversible Side Handle (18553), which further adds to operator comfort.  • See page 59 for electric models.   Model 58485  Central Vacuum  • For use with optional “O” style abrasive discs, which allow dust to be drawn up through pad holes.  • Vacuum shroud has 1-1/4" outside diameter port, for connection to external or central vacuum system.   Model 58480 Model 58485   Model Motor Motor Sound Maximum Air Flow Hose I.D. Size Air Inlet Air Pressure Weight Length Height Number hp (W) RPM Level SCFM (LPM) Inch (mm) Thread PSIG (Bar) Pound (kg) Inch (mm) Inch (mm)  58480 .7 (522) 2,500 87 dB(A) 27 (765) 3/8 (10) 1/4" NPT 90 (6.2) 8.3 (3.7) 17 (432) 6 (152) 58485 .7 (522) 2,500 87 dB(A) 27 (765) 3/8 (10) 1/4" NPT 90 (6.2) 9.1 (4.1) 17 (432) 6 (152)  Tune-Up Kit: No. 98224 (page 192)   Model 57101  Low Profile Model  • Unique low profile two-hand model is weight-mated to 5" diameter sanding pad.  • 56106 Non-Vacuum, vinyl-face pad included.  • Also includes convenient 97166 Hanger.  • A versatile, lightweight two-hand random orbital sander.   Model 57101   Model Motor Motor Orbit Dia. Pad Dia. Sound Maximum Air Flow Hose I.D. Size Air Inlet Weight Length Height Number hp (W) RPM Inch (mm) Inch (mm) Level SCFM (LPM) Inch (mm) Thread Pound (kg) Inch (mm) Inch (mm)  57101 .2 (149) 12,000 3/16 (5) 5 (127) 79 dB(A) 28 (793) 3/8 (10) 1/4" NPT 2.1 (.98) 8-5/16 (211) 3-3/4 (96)  Tune-Up Kit: No. 96537 (page 192)  • Additional Specifications: Air Pressure 90 PSIG (6.2 Bar)   • Thread 5/16"-24 Female   3/16" (5 mm) Dia. Orbit  For General Sanding   3/4" (19 mm) Dia. Orbit  Achieve a Swirl-Free Finish   58485   RANDOM ORBITAL SANDERSRANDOM ORBITAL SANDERS     54 Palm-Style Mini-Dynorbital ®   Air-Powered Random Orbital Sander   Excellent for Dust Nib Repair on Clearcoat   • Random orbital action provides ultra-smooth finishes on wood and coated surfaces. Sanding head provides the “random action.”  • Also excellent on metal and composites. Ideal for finesse sanding.  • Weighs only 1.7 lbs., for great operator comfort and control.   ABRASIVE DISCS  3/4" (19 mm) and 1-1/2" (38 mm) diameter   Sanding Pads: Page 164  • Abrasive Discs: Page 215   Model 57500  5,000 RPM  • Includes 54034 Sanding Head (accepts sanding pads with 1/4"-20 female thread).  • Includes 3/4" dia. pad (54017) and 1-1/4" dia. pad (54018) with sample micro-finishing film abrasive discs. Confines sanding to smallest possible area.  Model 57504  7,500 RPM  • Includes 54034 Sanding Head (accepts sanding pads with 1/4"-20 female thread).  • Includes 1/4" dia. pad (54018).   Model 57503  5,000 RPM  Model 57502  7,500 RPM  • Each model includes 54035 Sanding Head (accepts sanding pads with male locking-type threads such as 3M Roloc ™).  • Includes 1-1/4" dia. Roloc ™ Sanding Pad (54033).  • Model 57503 is used as part of Dynabrade “Two-Step” Polishing System, by automobile original equipment manufacturers (OEM’s). See page 83.   57501 Versatility Kit  • Includes: 57500 Mini-Dynorbital air tool; assortment of 3/4" and 1-1/4", 1/4"-20 female thread sanding pads for adhesive-backed and non-woven nylon discs; and an assortment of 3/4" and 1-1/4" coated silicon carbide and abrasive impregnated non-woven nylon discs.   3/16" (5 mm) Dia. Orbit  (All models on page)   Model Motor Motor Orbit Dia. Pad Dia. Sound Maximum Air Flow Hose I.D. Size Air Inlet Weight Length Height Number hp (W) RPM Inch (mm) Inch (mm) Level SCFM (LPM) Inch (mm) Thread Pound (kg) Inch (mm) Inch (mm)  57500 .05 (37) 5,000 3/16 (5) 3/4 (19), 1-1/4 (32) 70 dB(A) 6 (170) 1/4 (6) 1/4" NPT 1.7 (0.8) 5 (127) 3-5/8 (92) 57502 .05 (37) 7,500 3/16 (5) 3/4 (19), 1-1/4 (32) 70 dB(A) 6 (170) 1/4 (6) 1/4" NPT 1.7 (0.8) 5 (127) 3-5/8 (92) 57503 .05 (37) 5,000 3/16 (5) 3/4 (19), 1-1/4 (32) 70 dB(A) 6 (170) 1/4 (6) 1/4" NPT 1.7 (0.8) 5 (127) 3-5/8 (92) 57504 .05 (37) 7,500 3/16 (5) 3/4 (19), 1-1/4 (32) 70 dB(A) 6 (170) 1/4 (6) 1/4" NPT 1.7 (0.8) 5 (127) 3-5/8 (92) Tune-Up Kit: No. 96109 (page 192)  • Additional Specifications: Air Pressure 90 PSIG (6.2 Bar)   • Tool Thread 1/4"-20 Male   Model 57501   Model 57500   Model 57503 Model 57503   Right: Mini-Dynorbital ®  at work repairing a dust nib on clearcoat.   Roloc is a registered trademark of 3M Company.   RANDOM ORBITAL SANDERSRANDOM ORBITAL SANDERS   Model 57501     55  7° Offset Mini-Dynorbital  ®   Air-Powered Random Orbital Sander   Excellent for Repairing Dust Nibs on Clearcoat   • Ideal for finesse sanding.  • Optional side handle available. Order 13141 Handle/Collar Assembly.   Model 51410  3,200 RPM  • Includes 54034 Sanding Head (accepts 3" and smaller diameter sanding pads with 1/4"-20 female thread).  • Includes 54018 Pad (1-1/4" diameter) “medium” density, with sample adhesive-backed 9-micron micro-finishing film discs. Pad has 1/4"-20 female thread which mounts to tool’s sanding head.   Model 51411  3,200 RPM  Model 51412  5,000 RPM  • Includes 54035 Sanding Head (accepts 3" and smaller dia. sanding pads with male locking-type threads, such as 3M Roloc).  • Includes 54031 “soft” density, male locking-type pad, which accepts adhesive-backed micro-finishing film discs.   51415 Versatility Kit  Four Tools In One!  • Two mini-random orbital sanders, 1/4" die grinder and 3-1/2" disc sander.  • Includes: 3,200 RPM air tool; 54034 and 54035 Random Orbital Sanding Heads; assortment of sanding pads for adhesive-backed discs, 50010 Collet, 50126 Backup Pad, assortment of abrasives and wrenches.   ABRASIVE DISCS  3/4" (19 mm) and 1-1/2" (38 mm) diameter   Sanding Pads: Page 164  • Abrasive Discs: Page 215   The 51415 Versatility Kit provides the flexibility of two mini-random orbital sanders, 1/4" die grinder and a 3-1/2" disc sander.   Model Motor Motor Sound Maximum Air Flow Hose I.D. Size Air Inlet Tool Weight Length Height Number hp (W) RPM Level SCFM (LPM) Inch (mm) Thread Thread Pound (kg) Inch (mm) Inch (mm)  51410  .4 (298) 3,200 79 dB(A) 24 (680) 1/4 (6) 1/4" NPT 3/8"-24 Male 1.8 (.8) 8 (203) 5-1/2 (140) 51411  .4 (298) 3,200 79 dB(A) 24 (680) 1/4 (6) 1/4" NPT 3/8"-24 Male 1.8 (.8) 8 (203) 5-1/2 (140) 51412  .4 (298) 5,000 79 dB(A) 24 (680) 1/4 (6) 1/4" NPT 3/8"-24 Male 1.8 (.8) 8 (203) 5-1/2 (140) Tune-Up Kit: No. 96174 (page 192)  • Additional Specifications: Air Pressure 90 PSIG (6.2 Bar)   Model 51415 50010  54018  54031 50126  54034  54035   Model 51411   Model 51410   Roloc is a registered trademark of 3M Company.   3/16" (5 mm) Dia. Orbit  (All models on page)   RANDOM ORBITAL SANDERSRANDOM ORBITAL SANDERS   Model 51410     56 Angle-Head Mini-Dynorbital ®   Air-Powered Random Orbital Sander   Excellent for Repairing Dust Nibs on Clearcoat   • Built-in speed regulator, rear exhaust muffler, lever throttle.  • Sample 9-micron micro-finishing film discs are included.  • Optional 54585 Side Handle Assembly available.   ABRASIVE DISCS  3/4" (19 mm) and 1-1/2" (38 mm) diameter   Sanding Pads: Page 164  • Abrasive Discs: Page 215   Roloc is a registered trademark of 3M Company.   Model Motor Motor Sound Maximum Air Flow Hose I.D. Size Air Inlet Tool Weight Length Height Number hp (W) RPM Level SCFM (LPM) Inch (mm) Thread Thread Pound (kg) Inch (mm) Inch (mm)  53400 .4 (298) 3,200 83 dB(A) 21 (595) 1/4 (6) 1/4" NPT 1/4"-28 Female 1.9 (.9) 10-7/8 (276) 2-3/4 (70) 53401 .4 (298) 3,200 83 dB(A) 21 (651) 1/4 (6) 1/4" NPT 1/4"-28 Male 1.9 (.9) 10-7/8 (276) 2-3/4 (70) Tune-Up Kit: No. 96333 (page 192)  • Additional Specifications: Air Pressure 90 PSIG (6.2 Bar)   Model 53400  3,200 RPM  • 54028 Random Orbital Sanding Head accepts sanding pads with 1/4"-20 female thread.  • Includes 1-1/4" dia. medium density pad (54018), which has 1/4"-20 female thread and mounts to sanding head.  Model 53401  3,200 RPM  • 54029 Random Orbital Sanding Head accepts male locking- type Roloc™ pads.  • Includes 1-1/4" dia. soft density locking-type pad (54031), which has male locking-type thread and mounts to sanding head.   53402 Angle-Head Versatility Kit  • Includes: 3,200 RPM air tool (not shown), 54028 Random Orbital Sanding Head, 54018 Sanding Pad, 54029 Random Orbital Sanding Head, 54031 Sanding Pad, 50107 Sanding Pad, 54021 Adapter, sample 2" dia. sanding discs, 54030 Locking-Type Rotary Sanding Head, 50055 Collet (1/4"). Not shown: Abrasives – 3/4" and 1-1/4" dia. 9-micron (1000-grit) micro-finishing film discs; assorted wrenches.  • Tool also accepts 1/4"-28 threaded drill bits (not included).   53403 Sander/Buffer Versatility Kit  • Includes: 3,200 RPM air tool, 54028 Random Orbital Sanding Head, 50120 Hook ’n Loop Pad for Bonnets, 54018 Sanding Pad, 54021 Adapter, 90028 Wool Bonnet, assorted wrenches, 90027 Terry Cloth Bonnet, 95723 Finesse Sanding Creme, 95727 Dynabrade Glaze, 54017 Sanding Pad and sample abrasives.   Model 53400   Model 53402  54028   Model 53403   Dynaswivel ® air line connector is ideal for use with most air tools. The Dynaswivel  ® improves tool maneuverability, minimizes operator fatigue and extends hose life. (See page 163.)   Model 53400   Angle-Head Mini-Dynorbital ®can be used with Dynabrade Sanding Creme and Glaze.   54018 54028  5402150120 54018  90028  90027 54017  95723  95727  54031  54029   54030 54021 54030 50055   RANDOM ORBITAL SANDERSRANDOM ORBITAL SANDERS   3/16" (5 mm) Dia. Orbit  (All models on page)   Model 53400     57  Right Angle Mini-Dynorbital  ®   Air-Powered Random Orbital Sander   Ideal for Simple Spot Repair on Painted Surfaces   • Built-in speed regulator, rear exhaust muffler, lever throttle.  • Heavy duty gear head.  • Includes sample 9-micron micro-finishing film discs.   • Optional 54585 Side Handle Assembly available.   Model 53415  3,200 RPM  • Includes 54029 Sanding Head (accepts 3" and smaller dia. sanding pads with male locking-type threads such as 3M Roloc).  • Includes 54031 soft density male locking-type pad, which accepts adhesive-backed micro-finishing film discs.  Model 53417  3,200 RPM  • 54028 Random Orbital Sanding Head accepts sanding pads with 1/4"-20 female thread.  • Includes 1-1/4" dia. medium density locking-type pad (54018), which has 1/4"-20 female thread which mounts to sanding head.   ABRASIVE DISCS  3/4" (19 mm) and 1-1/2" (38 mm) diameter   Sanding Pads: Page 164  • Abrasive Discs: Page 215   Model Motor Motor Sound Maximum Air Flow Hose I.D. Size Air Inlet Tool Weight Length Height Number hp (W) RPM Level SCFM (LPM) Inch (mm) Thread Thread Pound (kg) Inch (mm) Inch (mm)  53415  .4 (298)  3,200  84 dB(A)  21 (595)  1/4 (6) 1/4" NPT 1/4"-28 Male 1.9 (.9)  7 (289) 2-3/4 (70) 53417 .4 (298) 3,200  84 dB(A)  21 (595)  1/4 (6) 1/4" NPT 1/4"-28 Male 1.9 (.9)  7 (289) 2-3/4 (70) Tune-Up Kit: No. 96333 (page 192)  • Additional Specifications:  Air Pressure 90 PSIG (6.2 Bar)   53465 Sander/Buffer Versatility Kit  • All that is needed for quick, simple spot repair on a variety of surfaces.  • Includes: Model 53417 Air Tool (3,200 RPM) with 54028 Random Orbital Sanding Head; 54021 Adapter (1/4"-28 to 1/4"-20 male); 54017 Vinyl Sanding Pad (3/4" dia.) 54018 Vinyl Sanding Pad (1-1/4" dia.); 50120 Hook-Face Pad (3" dia.); 90027 Terry Cloth Bonnet (3” dia.); 90028 Wool Buffing Pad (3" dia.); 95727 Dynabrade Glaze; 95723 Finesse Sanding Creme; 95848 Gear Oil; 95542 Grease; two 95541 Grease Guns; 95262 Wrench (14 mm); 95281 Wrench (19 mm); and sample abrasives.   Model 53415   Model 53415   Dynaswivel ® air line connector is ideal for use with most air tools. The Dynaswivel  ® improves tool maneuverability, minimizes operator fatigue and extends hose life. (See page 163.)   Roloc is a registered trademark of 3M Company.   Model 53465  95727 54017  95848 95542  95541  95541  54018  54028  54021 90028 90027  95723  95262  95281 50120   RANDOM ORBITAL SANDERSRANDOM ORBITAL SANDERS   3/16" (5 mm) Dia. Orbit  (All models on page)   Model 53415     58 Electric Dynorbital ®   120 Volt Electric-Powered Random Orbital Sander   Ready for Connection to Central Vacuum System   ABRASIVE DISCS  5" (127 mm) and 6" (152 mm) diameter   Sanding Pads: Page 164  • Abrasive Discs: Page 215   Model Motor Motor Pad Diameter  Weight Length Height Number hp (W) RPM Inch (mm) Voltage Current Phase Frequency Pound (kg) Inch (mm) Inch (mm)  59306 .8 (596) 11,600 5 (127) 120 V (AC)  6.8 Amps 1 60 Hz 5 (2.3) 12 (305) 5-1/2 (140) 59307 .8 (596) 11,600 6 (152) 120 V (AC)  6.8 Amps 1 60 Hz 5 (2.3) 12 (305) 5-1/2 (140) 59308 .8 (596) 11,600 5 (127) 120 V (AC)  6.8 Amps 1 60 Hz 5 (2.3) 12-1/2 (318) 5-1/2 (140) 59309 .8 (596) 11,600 6 (152) 120 V (AC)  6.8 Amps 1 60 Hz 5 (2.3) 12-1/2 (318) 5-1/2 (140) Tune-Up Kit: No. 42735 (page 192)  • Additional Specifications: Tool Thread 5/16"-24 Male   5" Diameter Models, Central Vacuum  Model 59306  3/8" Dia. Orbit  • Includes 56104 Vinyl-Face Vacuum Pad.  Model 59307  3/16" Dia. Orbit  • Includes 56104 Vinyl-Face Vacuum Pad.   6" Diameter Models, Central Vacuum  Model 59308  3/8" Dia. Orbit  • Includes 56105 Vinyl-Face Vacuum Pad.  Model 59309  3/16" Dia. Orbit  • Includes 56105 Vinyl-Face Vacuum Pad.   Model 59309 Model 59309   • Central Vacuum models have 1-1/4" outside diameter vacuum port for easy connection to central vacuum system.  • All models include a vacuum shroud that becomes operational when vacuum style pad (included) is mounted.  • Double-insulated electric motor with 8 ft. cord connects to standard 120 volt outlet.  • Repositionable side handle for left or right hand operation.   3/16" (5 mm) Dia. Orbit  For General Sanding  3/8" (10 mm) Dia. Orbit  For Aggressive Sanding   For efficient random orbital sanding and uniform finish, move the tool in “north-to-south” pattern, then change to “east-to-west” pattern. Be sure to sand complete surface in each pattern. Remember the rule of “start ON, stop OFF.” Place the tool ON the work surface before starting it, and move running tool OFF the surface before stopping it. This will help to prevent unwanted swirl marks.   RANDOM ORBITAL SANDERSRANDOM ORBITAL SANDERS   120 V (AC)     59  11" Dia. Electric Dynorbital  ®   120 Volt Electric-Powered Random Orbital Sander   Large Diameter Sanders Cover More Area in Less Time   • Proportionate 3/4" dia. orbit in relation to pad size assures swirl-free finish on a variety of surfaces.  • All models include 56231 Hook-Face Sanding Pad, for abrasive discs 11-1/4" in diameter. Pad is weight-mated to tool, further reducing tool vibration levels.   • Variable speed dialing for quick and easy RPM adjustments.  • Variable speed trigger allows feather-touch adjustment of tool speed.  • “Lock in” desired speed with Lock Set Button.  • Easy brush replacement for quick on-site maintenance.  • Double-insulated housing for protection against electric shock.  • Tools include reversible Side Handle (18553), which adds to operator comfort.   ABRASIVE DISCS  11-1/4" (286 mm) diameter   Top Handle Assembly: Page 207  • Sanding Pads: Page 164  • Abrasive Discs: Page 215   Model Motor Pad Dia. Sound Weight Length Height Number RPM Inch (mm) Level Voltage Current Phase Frequency Pound (kg) Inch (mm) Inch (mm)  51612 0 - 3,000 11 (279) 88 dB(A) 120 V (AC)  9 Amp. 1 60 Hz 11.3 (50) 21 (531) 7-5/16 (186) 51613 0 - 3,000 11 (279) 88 dB(A) 120 V (AC)  9 Amp. 1 60 Hz 12.5 (56) 21-1/2 (547) 7-5/16 (186)   Model 51612  Non-Vacuum  • For use with optional non-vacuum abrasive discs. Abrasive disc covers pad holes, for non-vacuum use.   Model 51613  Central Vacuum  • For use with optional “O” style abrasive discs, which allow dust to be drawn up through pad holes.  • Vacuum shroud has 1-1/4" (32 mm) outside diameter port, for connection to external (central) vacuum system.   Model 51612   Model 51612 Model 51613   Model 51613   3/4" (19 mm) Dia. Orbit  (All models on page)   Above: 11" Diameter Electric Dynorbital ® covers large areas on solid surface materials. Above: Central Vacuum tool offers efficient collection of dust and debris.   For efficient random orbital sanding and uniform finish, move the tool in “north-to-south” pattern, then change to “east-to-west” pattern. Be sure to sand complete surface in each pattern. Remember the rule of “start ON, stop OFF.” Place the tool ON the work surface before starting it, and move running tool OFF the surface before stopping it. This will help to prevent unwanted swirl marks.   RANDOM ORBITAL SANDERSRANDOM ORBITAL SANDERS   120 V (AC)  120 V (AC)   Model 51612 Model 51613     DynaLocke® ............................................ 61 Gear-Driven Sanders .................................. 62 11" Dia. Gear-Driven Sanders ........................ 63 Dynafine® Detail Sander .............................. 64 Dynafine® Finger Sander.............................. 64 Dynafine® “Backsplash” Sander .................... 65 Dynafine® Raised Panel Sander...................... 66   Dynabug® “Model T” Sander ........................ 67 Dynabug® Sander ...................................... 69 Dynabug® IISander .................................. 70 Dynabug® IIMesh Abrasive System ................ 72 11" Long File Board Sander .......................... 72 Dynaline Sander ...................................... 73 Right Angle Mini-Orbital .............................. 74     61  DynaLocke ®   Air-Powered Dual-Action Sander   Combination Disc Sander and Random Orbital Sander   GEAR-DRIVEN AND FINISHING SANDERS   • 12,000 RPM DynaLocke® is truly “two tools in one,” easily changing from a rotary Disc Sander to Random Orbital Sander with the flip of a switch.   • Ideal for metal applications; great on composite materials. Excellent for automotive work, such as paint stripping and blending. Also utilized for leveling glue seams on Corian ® and other solid surfaces.  • Switch is recessed within tool grip to prevent accidental engaging.   Non-Vacuum  Model 58460  3" Diameter  • Includes low profile, premium urethane sanding pad.  Model 58465  3-1/2" Diameter  • Includes low profile, premium urethane sanding pad.  Model 58430  5" Diameter  • Includes low profile, premium urethane sanding pad.  Model 58435  6" Diameter  • Includes low profile, premium urethane sanding pad.   Self-Generated Vacuum  • Self-Generated Vacuum models are ready for connection to optional portable dust collection system (see page 156).  • Tool has 1-1/4" outside diameter vacuum port, allowing increased air flow.  • Designed to vacuum in random orbital mode only.  Model 58461  3" Diameter  • Includes low profile, premium urethane sanding pad.  Model 58466  3-1/2" Diameter  • Includes low profile, premium urethane sanding pad.  Model 58431  5" Diameter  • Includes low profile, premium urethane sanding pad.  Model 58436  6" Diameter  • Includes low profile, premium urethane sanding pad.   GEAR-DRIVEN AND FINISHING SANDERS   ABRASIVE DISCS   3" (76 mm), 3-1/2" (89 mm), 5" (127 mm) and 6" (152 mm) diameter   Portable Dust Collection System: Page 156  •  Abrasive Discs: Page 215  •  Sanding Pads: Page 164   Tool should be completely stopped before changing sanding action.   DynaLocke ®is ideal for leveling glue squeeze on solid surfaces.   Rotary Motion  For Stripping and Blending  3/16" (5 mm) Dia. Random Orbit  For Swirl-Free Finishes   Model 58431   Model 58430   Model Motor Motor Pad Dia. Sound Maximum Air Flow Hose I.D. Size Air Inlet Tool Weight Length Height Number hp (W) RPM Inch (mm) Level SCFM (LPM) Inch (mm) Thread Thread Pound (kg) Inch (mm) Inch (mm)  58460 .45 (336) 12,000 3 (76) 78 dB(A) 23 (651) 1/4 (6) 1/4" NPT 5/16"-24 Female 2.35 (1.0) 10-5/16 (263) 5-3/8 (137) 58461 .45 (336) 12,000 3 (76) 78 dB(A) 23 (651) 1/4 (6) 1/4" NPT 5/16"-24 Female 2.35 (1.0) 10-5/16 (263) 5-3/8 (137) 58465 .45 (336) 12,000 3-1/2 (89) 78 dB(A) 23 (651) 1/4 (6) 1/4" NPT 5/16"-24 Female 2.35 (1.0) 10-5/16 (263) 5-3/8 (137) 58466 .45 (336) 12,000 3-1/2 (89) 78 dB(A) 23 (651) 1/4 (6) 1/4" NPT 5/16"-24 Female 2.35 (1.0) 10-5/16 (263) 5-3/8 (137) 58430 .45 (336) 12,000 5 (127) 82 dB(A) 23 (651) 1/4 (6) 1/4" NPT 5/16"-24 Female 2.7 (1.2) 11-1/16 (280) 5-1/8 (131) 58431 .45 (336) 12,000 5 (127) 82 dB(A) 23 (651) 1/4 (6) 1/4" NPT 5/16"-24 Female 2.6 (1.2) 11-1/16 (280) 5-1/8 (131) 58435 .45 (336) 12,000 6 (152) 82 dB(A) 23 (651) 1/4 (6) 1/4" NPT 5/16"-24 Female 2.8 (1.3) 11-1/2 (293) 5-1/8 (131) 58436 .45 (336) 12,000 6 (152) 85 dB(A) 23 (651) 1/4 (6) 1/4" NPT 5/16"-24 Female 2.7 (1.2) 11-1/2 (293) 5-1/8 (131 Tune-Up Kit: No. 98220 (page 192)  • Additional Specifications: Air Pressure 90 PSIG (6.2 Bar)   Corian is a trademark of DuPont   54218 Portable  Dust Collection  System (see  page 156).     62 Gear-Driven Sanders Air-Powered, 5", 6" and 8" Diameters   900 RPM Sanders for Aggressive Removal Applications   GEAR-DRIVEN AND FINISHING SANDERS   • Unique epicycloidal sanding action allows aggressive removal of material.  • Applications include removal and leveling of large amounts of filler materials such as glue or epoxy; leveling small welds; removing coatings. For use on materials including metal, solid surfaces, wood and fiberglass.  • Ergonomically designed for low vibration and reduced sound levels.  • Excellent comfort and control, especially when working on vertical sides or large tabletops. Long handle allows for two-hand support of tool.   Non-Vacuum  Model 58441  5" Diameter  • Includes low profile, premium urethane sanding pad.  Model 58442  6" Diameter  • Includes low profile, premium urethane sanding pad.  Model 58445  8" Diameter  • Includes low profile, premium urethane sanding pad.   GEAR-DRIVEN AND FINISHING SANDERS   ABRASIVE DISCS   5" (127 mm), 6" (152 mm) and 8" (203 mm) diameter   Abrasive Discs: Page 215  •  Sanding Pads: Page 164   Central Vacuum  • Central Vacuum models are designed for use with central vacuum system or external vacuum source.  • Includes combination lip-seal shroud/overskirt, which allows greater workpiece visibility and enhanced vacuum capability.   • Dust is extracted away from air motor (reducing contamination) for a smoother, easier path of extraction.   • Anti-clog design for efficient sanding of damp filler material.   Model 58443 6" Diameter  • Includes low profile, premium urethane sanding pad (6 holes).  • Vacuum shroud has 1" outside diameter vacuum port.  Model 58444  6" Diameter  • Includes low profile, premium urethane sanding pad (8 holes).  • Vacuum shroud has 1" outside diameter vacuum port.  Model 58446  8" Diameter  • Includes low profile, premium urethane sanding pad (8 holes).  • Vacuum shroud has 2" outside diameter vacuum port.   Model Motor Motor Pad Dia. Sound Maximum Air Flow Hose I.D. Size Air Inlet Weight Length Height Number hp (W) RPM Inch (mm) Level SCFM (LPM) Inch (mm) Thread Pound (kg) Inch (mm) Inch (mm)  58441 .45 (336) 900 5 (127) 79 dB(A) 23 (651) 1/4 (6) 1/4" NPT 3.6 (1.7) 11-1/16 (281) 5-5/8 (143) 58442 .45 (336) 900 6 (152) 78 dB(A) 23 (651) 1/4 (6) 1/4" NPT 3.6 (1.7) 11-1/2 (293) 5-5/8 (143) 58443 .45 (336) 900 6 (152) 79 dB(A) 23 (651) 1/4 (6) 1/4" NPT 3.8 (1.7) 11-1/2 (293) 5-5/8 (143) 58444 .45 (336) 900 6 (152) 80 dB(A) 23 (651) 1/4 (6) 1/4" NPT 3.8 (1.7) 11-1/2 (293) 5-5/8 (143) 58445 .45 (336) 900 8 (203) 80 dB(A) 23 (651) 1/4 (6) 1/4" NPT 3.9 (1.8) 12-1/2 (319) 5-9/16 (142) 58446 .45 (336) 900 8 (203) 81 dB(A) 23 (651) 1/4 (6) 1/4" NPT 4.3 (2.0) 12-1/2 (319) 5-9/16 (142) Tune-Up Kit: No. 98221 (page 192)  • Additional Specifications: Air Pressure 90 PSIG (6.2 Bar)   Model 58441   Epicycloidal Motion  Gear-Driven Tools   58446 Gear-Driven Sander is utilized for efficient surface conditioning. Central Vacuum models may also be run with Channel-Vacuum Pads for greater efficiency (see page 166).   Model 58446   Gear-Driven Sanders may be used for heavy stock removal on wood filler applications, and to remove small welds prior to painting.   Model 58446     63  Gear-Driven Sanders Air-Powered, 11" Diameter   For Fast, Controlled Sanding and Aggressive Material Removal   GEAR-DRIVEN AND FINISHING SANDERS   • Powerful .45 hp air motor runs at 950 RPM, for aggressive material removal.  • Extra-large 11" sanding area allows operator to cover more area in less time, leveling substrates and removing filler material with ease and efficiency.  • Useful for manufacturers of large transportation/emergency vehicles, solid surface fabricators, swimming pool manufacturers, marine original equipment manufacturers, marine repair facilities and more.  • Unique “epicycloidal” pad motion generates torque-enhanced power, for consistent material removal.  • Tool features long handle design for easy two-handed control. Operator comfort is enhanced, especially when working in vertical positions.  • Includes weight-mated sanding pad for reduced vibration levels.  • Speed control lever is conveniently located for easy thumb adjustment.  • Insulated tool housing reduces cold air transmission to the hand.  • Safety-lock throttle lever prevents accidental start-up of tool.  Model 58040  Non-Vacuum  • For use with non-vacuum abrasive discs.  • Includes 56231 Hook-Face Sanding Pad, for abrasive discs 11-1/4" (286 mm) in diameter.   GEAR-DRIVEN AND FINISHING SANDERS   ABRASIVE DISCS   11-1/4" (286 mm) diameter   Abrasive Discs: Page 215  •  Sanding Pads: Page 169   Model Motor Motor Pad Dia. Sound Maximum Air Flow Hose I.D. Size Air Inlet Weight Length Height Number hp (W) RPM Inch (mm) Level SCFM (LPM) Inch (mm) Thread Pound (kg) Inch (mm) Inch (mm)  58040 .45 (336) 950 11 (279) 86 dB(A) 23 (651) 1/4 (6) 1/4" NPT 5.0 (2.3) 14-3/32 (358) 5-10/16 (143) 58041 .45 (336) 950 11 (279) 86 dB(A) 23 (651) 1/4 (6) 1/4" NPT 5.5 (2.5) 14-3/32 (358) 5-10/16 (143)  Tune-Up Kit: No. 98576 (page 192)  • Additional Specifications: Air Pressure 90 PSIG (6.2 Bar)   Model 58040 Model 58041 Model 58041  Central Vacuum  • For use with “O” style abrasive discs, which allow dust to be drawn up through pad holes.  • Includes 56231 Hook-Face Sanding Pad, for abrasive discs 11-1/4" in diameter.  • Vacuum shroud has 1-1/4" diameter port, for connection to external vacuum system.   11" Gear-Driven Sanders each include 56231 Hook-Face Sanding Pad with 5 vacuum holes. When attaching a non- vacuum (solid) abrasive disc, the pad holes are covered by the abrasive, for non-vacuum use. When attaching a vacuum (“O” style) abrasive disc, the pad holes remain exposed, allowing dust to be drawn up through the pad holes (see page 169).   Model 58041   Epicycloidal Motion  Gear-Driven Tools   Model 58041     64 Dynafine ® Detail Sander Air-Powered Finishing Sander   Excellent for Use in Tight Corners   GEAR-DRIVEN AND FINISHING SANDERS   Model 57900  • Detail sander includes triangular and tear-drop hook-face pads; also includes 94407 Flow-Control Dynaswivel ®.  • Excellent for cleaning wood edges and corners.  • Ideal for use on furniture, shutters, moldings, door jambs, metal parts and much more.  • Features 1/32" dia. orbital action for superior finishes.  • Handle is offset 7° for greater operator comfort and control.  • Uses hook-face and PSA (adhesive-backed) coated, non-woven nylon and sponge abrasives.  Model 57910  Versatility Kit  • Includes 57900 tool with hook-face and PSA (adhesive- backed) pads, 94407 Flow-Control Dynaswivel ® (not shown) and an assortment of abrasives.   GEAR-DRIVEN AND FINISHING SANDERS   TEAR-DROP DISCS   3-3/4" x 2-3/8" (95 mm x 60 mm)  TRIANGULAR DISCS   2-7/8" x 3-1/8" (73 mm x 79 mm)   ABRASIVE STRIPS   3/8" x 2" (10 mm x 51 mm) 3/4" x 2" (19 mm x 51 mm) Dynafine ® Finger Sander Air-Powered Finishing Sander   Excellent for Use in Hard-to-Reach Areas   Model 57930  • Tool includes 57932 Offset Sanding Arm (with 57938 Soft Platen Pad), 94407 Flow-Control Dynaswivel® and an assortment of abrasives.  • Ideal for use on wood, metal, varnished surfaces, non-ferrous metals, stone, glass, marble, plastic, composites, painted surfaces and more!  • Handle is offset 7° for greater operator comfort and control.  • 1/32" dia. orbital action for fine finishes.   Platen Pads   (sold separately)   Abrasive Discs and Strips: Page 215, 220  • Accessories: Page 159   Model Motor Motor Sound Maximum Air Flow Hose I.D. Size Air Inlet Weight Length Height Number hp (W) RPM Level SCFM (LPM) Inch (mm) Thread Pound (kg) Inch (mm) Inch (mm)  57930 .12 (89) 13,000 65 dB(A) 20 (566) 1/4 (6) 1/4" NPT 1.6 (.7) 11-3/4 (298) 4 (102) Tune-Up Kit: No. 96236 (page 192)  • Additional Specifications: Air Pressure 90 PSIG (6.2 Bar)   Part No. Size (W x L) Density  57938 3/8" (9 mm) x 2" (52 mm) Soft 57940 3/8" (9 mm) x 2" (52 mm) Hard 57937 3/4" (19 mm) x 2" (52 mm) Soft 57939 3/4" (19 mm) x 2" (52 mm) Hard   Model Motor Motor Sound Maximum Air Flow Hose I.D. Size Air Inlet Weight Length Height Number hp (W) RPM Level SCFM (LPM) Inch (mm) Thread Pound (kg) Inch (mm) Inch (mm)  57900 .12 (89) 13,000 65 dB(A) 20 (566) 1/4 (6) 1/4" NPT 1.6 (.7) 9 (229) 3-3/4 (95) Tune-Up Kit: No. 96236 (page 192)  • Additional Specifications: Air Pressure 90 PSIG (6.2 Bar)   Model 57900  Model 57930   Model 57930  57910 57900 Orbital Motion Orbital Motion   57900     65  “Backsplash” Sander Air-Powered Dynafine ® Finishing Sander   A Must for All Solid Surface Fabricators   GEAR-DRIVEN AND FINISHING SANDERS   Model 58000  • Excellent for fabricating solid surface coved backsplashes; ideal for cleaning metal edges and corners.  • Includes 58021 and 58024 Backsplash Pads, shown below.  • Air motor features 1/32" diameter orbital action for achieving a superior finish.  • Lightweight tool of only 1.6 lbs!  • Low profile housing allows easy access in hard-to-reach areas. Handle is offset 7° for greater operator comfort and control.  • Includes 94407 Dynaswivel® with fingertip air-flow control dial.  58010 Versatility Kit  • Includes tool with all five sanding pads shown below and an assortment of PSA (adhesive-backed) abrasives.   GEAR-DRIVEN AND FINISHING SANDERS   ABRASIVE SHEETS   3-1/2" x 2-3/4" (89 mm x 70 mm)   Coupler/Plugs: Page 161  • Abrasive Sheets: Page 220  • Accessories: Page 159   Model Motor Motor Sound Maximum Air Flow Hose I.D. Size Air Inlet Weight Length Height Number hp (W) RPM Level SCFM (LPM) Inch (mm) Thread Pound (kg) Inch (mm) Inch (mm)  58000 .12 (89) 13,000 65 dB(A) 20 (566) 1/4 (6) 1/4" NPT 1.6 (.7) 9 (229) 3-3/4 (95) Tune-Up Kit: No. 96236 (page 192)  • Additional Specifications: Air Pressure 90 PSIG (6.2 Bar)   Standard Sanding Pads (Included with Tool)   • 58020 1/4" Radius  • 58022 1/2" Radius  • 58023 5/8" Radius   Optional Sanding Pads (Sold Separately)   Model 58000   Model 58000   Dynafine ®“Backsplash” Sander powers 58021 Sanding Pad (included), for finishing within coved backsplash.   Sander powers 58024 Pad (included) for use on a radiused surface.   For optimum performance, use Dynafine  ®   “Backsplash” Sander with 95676 Coupler/Plug Assembly (see page 161).   • 58024 3/4" Reverse Radius  • 58021 3/8" Radius   Model 58000   Orbital Motion   Model 58000     66 Raised Panel Sander Air-Powered Dynafine ® Finishing Sander   Perfect for Sanding Raised Panels and Linear Profiles   GEAR-DRIVEN AND FINISHING SANDERS   Model 57906  • 57906 Dynafine® comes mounted with 57956 Raised Panel Pad, which offers unique angled edges for sanding in tight corners and on raised panel edges.   • Raised Panel Pad is 4" long x 3/4" wide, made of 1/2" thick premium urethane, medium density. Pad accepts both coated abrasive and non-woven nylon sheets.  • Excellent for sanding raised panels and linear profiles.  • Also ideal for use on furniture, shutters, moldings and more.  • Tool features 1/32" orbit for superior finishes.  • Raised Panel Pad may also be used with 57900 Dynafine ®  (see page 64) and 57902 Wet Dynafine ® (see page 79).   57905 Raised Panel Pad Kit  • Kit includes 57956 Raised Panel Pad, adapter and two mounting screws.  • Also includes two each of Coated Abrasive Sheets 93670 (120 grit), 93671 (150 grit), 93672 (180 grit) and 93673 (220 grit); abrasives not shown.  57956 Raised Panel Pad   • 57956 Raised Panel Pad may be ordered separately. (Adapter and mounting screws not included.)  98292 Raised Panel Pad Adapter Kit  • Includes adapter and two mounting screws (pad not included).   GEAR-DRIVEN AND FINISHING SANDERS   ABRASIVE SHEETS   4" x 3/4" (102 mm x 19 mm)   Abrasive Sheets: Page 220  • Accessories: Page 159   Model 57906   57906 Dynafine ®utilizing Raised Panel Pad on a narrow curved edge.   Model Motor Motor Sound Maximum Air Flow Hose I.D. Size Air Inlet Weight Length Height Number hp (W) RPM Level SCFM (LPM) Inch (mm) Thread Pound (kg) Inch (mm) Inch (mm)  57906 .12 (89) 13,000 65 dB(A) 20 (566) 1/4 (6) 1/4" NPT 1.6 (.7) 9 (229) 3-3/4 (95) Tune-Up Kit: No. 96236 (page 192)  • Additional Specifications: Air Pressure 90 PSIG (6.2 Bar)   57905 Raised Panel Pad Kit   The use of a filter-regulator- lubricator will increase tool performance, extend tool life and lessen repair costs. (See page 163.)   Orbital Motion   Model 57906 Model 57906   NEW! NEW!     67  Dynabug ® “Model T” Sander Air-Powered Orbital Finishing Sander   Ideal for Featheredging, Finishing, Sanding and Blending   GEAR-DRIVEN AND FINISHING SANDERS   • 3/32" diameter orbital action is ideal for fine finishes.  • Lightweight...only 1 lb.!  Palm-style, ergonomic design features low profile grip for greater operator comfort and control.  • Operates 8-9 SCFM at 90 PSIG. Can be run by as little as  3 horsepower compressor.  • Low maintenance – easy to repair. Turbine- style vaneless air motor needs no oil!  • Easy interchangeable sanding pads. Uses reattachable and PSA (adhesive-backed) abrasive sheets and discs; coated and non-woven nylon.   Non-Vacuum  Model 57920  4" x 4-5/16" Pad (with clips)  • Includes 57999 Vinyl-Face Pad.  Model 57923  4-1/4" x 4-1/2" “Quarter-Sheet” Pad   • Includes 57998 Hook-Face Pad.  Model 57925  4-1/4" x 4-1/2" “Quarter-Sheet” Pad  • Includes 56244 Vinyl-Face Pad.   Non-Vacuum  Model 57922  5" Diameter Pad  • Includes 56249 Vinyl-Face Pad.  Model 57924  5" Diameter Pad  • Includes 56248 Hook-Face Pad.   GEAR-DRIVEN AND FINISHING SANDERS   Couplers/Plugs: Page 161  • Abrasive Discs and Sheets: Page 215, 220  • Sanding Pads: Page 175   Model Motor Motor Sound Maximum Air Flow Hose I.D. Size Air Inlet Weight Length Height Number hp (W) RPM Level SCFM (LPM) Inch (mm) Thread Pound (kg) Inch (mm) Inch (mm)  57920 – 20,000  72 dB(A) 9 (255) 1/4 (6) 1/4" NPT 1 (.45) 5 (127) 3 (76) 57923 – 20,000  72 dB(A) 9 (255) 1/4 (6) 1/4" NPT 1 (.5) 5-1/2 (140) 3 (76) 57925 – 20,000  72 dB(A) 9 (255) 1/4 (6) 1/4" NPT 1 (.5) 5 (127) 3 (76) 57922 – 20,000  72 dB(A) 9 (255) 1/4 (6) 1/4" NPT 1 (.5) 5-1/2 (140) 3 (76) 57924 – 20,000  72 dB(A) 9 (255) 1/4 (6) 1/4" NPT 1 (.5) 5-1/2 (140) 3 (76) 57926 – 20,000  72 dB(A) 9 (255) 1/4 (6) 1/4" NPT 1 (.5) 5 (127) 3 (76) 57927 – 20,000  72 dB(A) 9 (255) 1/4 (6) 1/4" NPT 1 (.5) 5 (127) 3 (76) Tune-Up Kit: No. 96169 (page 192)  • Additional Specifications: Air Pressure 90 PSIG (6.2 Bar)   Model 57920   Model 57923 Model 57922  Model 57926  Non-Vacuum  Model 57926  6" Diameter Pad  • Includes 56269 Vinyl-Face Pad.  Model 57927  6" Diameter Pad  • Includes 56268 Hook-Face Pad.   ABRASIVE SHEETS  4-1/2" x 5-1/2" (114 mm x 140 mm) 4-1/4" x 4-1/2" (108 mm x 114 mm) ABRASIVE DISCS  5", 6" (127 mm, 152 mm)   Orbital Motion   Orbital Motion   Orbital Motion   Equipped with 95955 Urethane Inlet Hose   Equipped with 95955 Urethane Inlet Hose   Equipped with 95955 Urethane Inlet Hose  Model 57920     50617 Portable Dust Collection Systems (see page 156).   68  Dynabug ® “Model T” Sander Air-Powered Orbital Finishing Sander   Ideal for Featheredging, Finishing, Sanding and Blending   GEAR-DRIVEN AND FINISHING SANDERS   Self-Generated Vacuum  Model 58070  4-1/4" x 4-1/2" “Quarter-Sheet” Pad  • Ready for connection to optional portable self-contained dust collection systems.  • Has 1" outside diameter vacuum port for easy vacuum hose connection.  • Includes 56286 Vinyl-Face Vacuum Pad.  Model 58075  4-1/4" x 4-1/2" “Quarter-Sheet” Pad  • Ready for connection to optional portable self-contained dust collection systems.  • Has 1" outside diameter vacuum port for easy vacuum hose hook-up.  • Includes 56285 Hook-Face Vacuum Pad.   GEAR-DRIVEN AND FINISHING SANDERS   ABRASIVE SHEETS   4-1/4" x 4-1/2" (108 mm x 114 mm) Also Abrasive Rolls   Portable Dust Collection Systems: Page 156  • Abrasive Sheets: Page 220  • Sanding Pads: Page 175   Model Motor Motor Sound Maximum Air Flow Hose I.D. Size Air Inlet Weight Length Height Number hp (W) RPM Level SCFM (LPM) Inch (mm) Thread Pound (kg) Inch (mm) Inch (mm)  58070 – 16,000  83 dB(A) 17 (255) 1/4 (6) 1/4" NPT 1.5 (.7) 8 (203) 4 (102) 58075 – 16,000  83 dB(A) 17 (255) 1/4 (6) 1/4" NPT 1.5 (.7) 8 (203) 4 (102) 57928 – 20,000  72 dB(A) 9 (255) 1/4 (6) 1/4" NPT 1 (.5) 5 (127) 3 (76) 57929 – 20,000  72 dB(A) 9 (255) 1/4 (6) 1/4" NPT 1 (.5) 5 (127) 3 (76) Tune-Up Kit: No. 96169 (page 192)  • Additional Specifications: Air Pressure 90 PSIG (6.2 Bar)   Dynabug ® “Model T” Sander is a true OIL-FREE tool. Turbine-style, vaneless air motor needs no oil, and is virtually maintenance free.   Model 58070   Model 57928   57928 Dynabug ®“Model T” sands right into corners.   Central Vacuum  Model 57928  4-1/4" x 4-1/2" “Quarter-Sheet” Pad  • Has 1" outside diameter vacuum port for easy central vacuum connection.  • Includes 56286 Vinyl-Face Vacuum Pad.  Model 57929  4-1/4" x 4-1/2" “Quarter-Sheet” Pad  • Has 1" outside diameter vacuum port for easy central vacuum connection.  • Includes 56285 Hook-Face Vacuum Pad.   Model 57928   Orbital Motion  (All models on page)   Equipped with 95955 Urethane Inlet Hose   Equipped with 95955 Urethane Inlet Hose     69  Dynabug ® Orbital Sander Air-Powered “Jitter-Bug” Type Orbital Finishing Sander   Featheredge, Finish, Sand and Blend   GEAR-DRIVEN AND FINISHING SANDERS   • 3/32" dia. orbit.  • Powerful 10,000 RPM air motor utilizes 16 SCFM at 90 PSIG.  • Compact size and lightweight. Excellent for sanding restricted areas and vertical sides.  • Tools have heavy-duty clips to accept traditional 3-2/3" x 9" abrasive sheets (rolls also available).  Model 57810  Non-Vacuum   • Includes premium 57850 Vinyl-Face Sanding Pad for PSA (abrasive-backed) abrasives.   Model 57811  Self-Generated Vacuum  • Ready for connection to optional portable self-contained dust collection systems.  • Includes premium 57855 Vinyl-Face Sanding Pad for PSA (abrasive-backed) abrasives.   GEAR-DRIVEN AND FINISHING SANDERS   ABRASIVE SHEETS   3-2/3" x 9" (93 mm x 229 mm) 3-2/3" x 7" (93 mm x 178 mm) Also Abrasive Rolls   Portable Dust Collection Systems: Page 156  • Abrasive Sheets: Page 220  • Sanding Pads: Page 174   Model Motor Motor Sound Maximum Air Flow Hose I.D. Size Air Inlet Weight Length Height Number hp (W) RPM Level SCFM (LPM) Inch (mm) Thread Pound (kg) Inch (mm) Inch (mm)  57810 .24 (179) 10,000 80 dB(A) 16 (453) 1/4 (6) 1/4" NPT 2.8 (1.3) 7-1/4 (184) 4-1/4 (108) 57811 .24 (179) 10,000 83 dB(A) 16 (453) 1/4 (6) 1/4" NPT 2.6 (1.2) 7-1/4 (184) 4-1/4 (108) 57814 .24 (179) 10,000 80 dB(A) 16 (453) 1/4 (6) 1/4" NPT 2.6 (1.2) 7-1/4 (184) 4-1/4 (108) Tune-Up Kit: No. 96024 (page 192)  • Additional Specifications: Air Pressure 90 PSIG (6.2 Bar)   Easily convert non-vacuum abrasive sheets to vacuum-ready by using 57476 Punch Plate (3-2/3" x 7").    Model 57814  Central Vacuum  • Has 1" outside diameter vacuum port for easy central vacuum hose hook-up.  • Includes premium 57855 Vinyl-Face Sanding Pad for PSA (abrasive-backed) abrasives.   Model 57811 Model 57814  50617 Portable Dust Collection Systems (see page 156).   Model 57810  Model 57810   57810 Dynabug ®at work on a vertical edge.   Orbital Motion  (All models on page)     70 Dynabug ®  II Orbital Sander Air-Powered Orbital Finishing Sander   For Controlled Sanding and Stock Removal, Featheredging, Blending, Finishing   GEAR-DRIVEN AND FINISHING SANDERS   • Powerful .15 hp (112 W), 10,000 RPM air motor gets the job done in countless applications, utilizing just 13 SCFM (368 LPM) at 90 PSI (6.2 Bar).  • Precise 3/32" orbital motion is ideal for achieving a controlled, ultra-fine finish on a variety of surfaces.  • Compact size is ideal for all operators, including those with smaller hands.  • Engineered and tested to ensure less tool vibration than any competitive model!  • Lighter tool weight minimizes hand and arm fatigue. Perfect for vertical applications.  • Rectangular shape sands deep into corners, where round pads cannot reach.   GEAR-DRIVEN AND FINISHING SANDERS   ABRASIVE SHEETS   75 mm x 110 mm (3" x 4-1/4") 81 mm x 133 mm (3" x 5-1/4") 100 mm x 148 mm (4" x 5-3/4")   Drop-In Motor: Page 192  • Abrasive Sheets: Page 220  • Sanding Pads: Page 176   Model 58500  Non-Vacuum, Hook-Face Pad  • Includes 56315 Hook-Face Sanding Pad, 74 mm wide x 109 mm long (approximately 3" x 4-1/4").  Model 58503  Non-Vacuum, Hook-Face Pad  • Includes 56317 Hook-Face Sanding Pad, 80 mm wide x 130 mm long (approximately 3-1/4" x 5").  Model 58509  Non-Vacuum, Vinyl Pad  • Includes 56355 Vinyl-Face Sanding Pad, 74 mm wide x 109 mm long (approximately 3" x 4-1/4").   Clip  Clip   Model 58507  Non-Vacuum with Clips  • Tool has specially designed pad base assembly with heavy-duty clips, for attaching optional abrasive sheets.  • Clips are designed for heavy-duty use. Ideal for high- production workplaces.  • Includes 56354 vinyl-face Sanding Pad, 68 mm wide x 175 mm long (approximately 2-3/4" x 7"). Weight-mated pad screws directly to pad base assembly.   • Accepts abrasive sheets cut from 70 mm (2-3/4") wide abrasive rolls. Four sheets of this width may also be cut from sheets 229 mm wide x 280 mm long (9" x 11"). Abrasives are sold separately (see page 220).   Compact size of Dynabug ® IIis ideal for operators with smaller hands.   Model 58500 Model 58507   Model 58500   Orbital Motion  (All models on page)   All Dynabug ® II  models include NEW Comfort Platform! (see page 46)   Model Motor Motor Sound Maximum Air Flow Hose I.D. Size Air Inlet Air Pressure Weight Length Height Number hp (W) RPM Level SCFM (LPM) Inch (mm) Thread PSIG (Bar) Pound (kg) Inch (mm) Inch (mm)  58500 .15 (112) 10,000 81 dB(A) 13 (368) 1/4 (6) 1/4" NPT 90 (6.2) 1.6 (.7) 5-3/4 (147) 3-1/2 (91) 58503 .15 (112) 10,000 81 dB(A) 13 (368) 1/4 (6) 1/4" NPT 90 (6.2) 1.6 (.7) 6-1/4 (157) 3-1/2 (91) 58507 .15 (112) 10,000 82 dB(A) 13 (368) 1/4 (6) 1/4" NPT 90 (6.2) 2.1 (.95) 7-1/16 (180) 3-3/4 (94) 58509 .15 (112) 10,000 81 dB(A) 13 (368) 1/4 (6) 1/4" NPT 90 (6.2) 1.6 (.7) 5-3/4 (147) 3-1/2 (91) Tune-Up Kit: No. 58509 (page 192)   Model 58500     71  Dynabug ®  II Orbital Sander Air-Powered Orbital Finishing Sander   For Controlled Sanding and Stock Removal, Featheredging, Blending, Finishing   GEAR-DRIVEN AND FINISHING SANDERS   Self-Generated Vacuum Dynabug®IIvacuums through the tool’s exhaust. Tool has 1" outside diameter vacuum port, ready for connection to optional dust collection systems. Includes hook-face sanding pad, for optional hook-face vacuum abrasive sheets.  Model 58501  Self-Generated Vacuum  • Includes 56316 Vacuum Sanding Pad, 74 mm wide x 109 mm long (approximately 3" x 4-1/4").  Model 58504  Self-Generated Vacuum  • Includes 56319 Vacuum Sanding Pad, 80 mm wide x 130 mm long (approximately 3-1/4" x 5"), with eight vacuum holes.   GEAR-DRIVEN AND FINISHING SANDERS   ABRASIVE SHEETS   75 mm x 110 mm (3" x 4-1/4") 81 mm x 133 mm (3" x 5-1/4") 100 mm x 148 mm (4" x 5-3/4")   Drop-In Motor: Page: 190  • Abrasive Sheets: Page 220  • Sanding Pads: Page 176   Model Motor Motor Sound Maximum Air Flow Hose I.D. Size Air Inlet Air Pressure Weight Length Height Number hp (W) RPM Level SCFM (LPM) Inch (mm) Thread PSIG (Bar) Pound (kg) Inch (mm) Inch (mm)  58501 .15 (112) 10,000 78 dB(A) 13 (368) 1/4 (6) 1/4" NPT 90 (6.2) 1.7 (.75) 8-1/4 (212) 3-1/2 (91) 58502 .15 (112) 10,000 83 dB(A) 13 (368) 1/4 (6) 1/4" NPT 90 (6.2) 1.6 (.7) 7 (180) 3-1/2 (91) 58504 .15 (112) 10,000 78 dB(A) 13 (368) 1/4 (6) 1/4" NPT 90 (6.2) 1.7 (.75) 8-3/4 (222) 3-1/2 (91) 58505 .15 (112) 10,000 83 dB(A) 13 (368) 1/4 (6) 1/4" NPT 90 (6.2) 1.6 (.7) 7-1/2 (190) 3-1/2 (91) 58506 .15 (112) 10,000 83 dB(A) 13 (368) 1/4 (6) 1/4" NPT 90 (6.2) 1.6 (.7) 8-3/4 (222) 3-1/2 (91) Tune-Up Kit: No. 98222 (page 192)   Central Vacuum Dynabug®IIhas 1" outside diameter vacuum port, ready for connection to external vacuum source. Includes hook-face sanding pad, for optional hook-face vacuum abrasive sheets.  Model 58502  Central Vacuum  • Includes 56316 Vacuum Sanding Pad, 74 mm wide x 109 mm long (approximately 3" x 4-1/4").  Model 58505  Central Vacuum  • Includes 56319 Vacuum Sanding Pad, 80 mm wide x 130 mm long (approximately 3-1/4" x 5"), with eight vacuum holes.  Model 58506 “Delta Style”   Central Vacuum  • Includes 56323 “Delta Style” Vacuum Sanding Pad, 99 mm wide (at wider end) x 143 mm long (approximately 4" x 5-3/4"), with seven vacuum holes. Unique pad has curved edges for sanding rounded areas, and pointed tip for reaching into tight corners.   Model 58504  Model 58506 “Delta Style”   Lightweight design of Dynabug ® IIminimizes hand and arm fatigue.   Although some Dynabug  ® IIsanding pads are interchangeable, for best results use Non-Vacuum pads only on Non-Vacuum tools and Vacuum Pads only on Vacuum Tools.   50617 Portable Dust Collection System (see page 156).   56323 “Delta Style” Pad  Curved Pad Edge   Model 58505   Orbital Motion  (All models on page)   Model 58505     72   Model Motor Motor Sound Maximum Air Flow Hose I.D. Size Air Inlet Weight Length Height Number hp (W) RPM Level SCFM (LPM) Inch (mm) Thread Pound (kg) Inch (mm) Inch (mm)  51350 .3 (186) – 84 dB(A) 18 (510) 1/4 (6) 1/4" NPT 3.1 (1.4) 11 (279) 3-3/4 (95) Tune-Up Kit: No. 96531 (page 192)  • Additional Specifications: Air Pressure 90 PSIG (6.2 Bar)   Ultra-smooth in-line sanding action is ideal on wood.   Model 51350   11" Long File Board Sander Air-Powered In-Line Finishing Sander   Ideal for Use on Wood, Metals, Composites and Solid Surfaces   Model 51350  • File board excellent for industrial graining of stainless steel.  • Tool features high quality gear for smooth-running in-line sanding action.  • 2,400 strokes per minute. 3/8" (10 mm) long sanding stoke.  • For use with PSA (adhesive-backed) coated and non-woven sheets and rolls.  • Includes 2-3/4" wide x 11" long 57512 Premium Urethane PSA (adhesive-backed) Sanding Pad with clips.  • Also accepts 2-3/4" wide x 11" long pads without clips, and 2-3/4" wide x 8" long non-vacuum pads.   ROLLS  2-3/4" (70 mm) wide   Abrasive Rolls: Page 221  • Sanding Pads: Page 174   Model 51350   Sanding Pad can be rotated 360° for adjusting to most efficient position per application.   GEAR-DRIVEN AND FINISHING SANDERSGEAR-DRIVEN AND FINISHING SANDERS   In-Line Motion   Mesh Abrasive System For Use with Dynabug ® II Sanders   Includes Unique Sanding Pad for Mesh-Style Abrasive Discs   MESH ABRASIVE SHEETS   75 mm x 110 mm (3" x 4-1/4") 81 mm x 133 mm (3" x 5-1/4") 100 mm x 148 mm (4" x 5-3/4")   58504   56319 54288   Model 58508  • Includes 58504 Dynabug® II (Self-generated Vacuum), 56319 Vacuum Pad (8 holes, hook-face), “bag-in-bag” vacuum system, extra disposable vacuum bags and scratch-proof belt strap.   Model 51350     73  Dynaline Sander Air-Powered In-Line Finishing Sander   Ideal for Working on Wood, Metals, Composites and Solid Surfaces   • 2,400 strokes per minute at 90 PSIG (6.2 Bar). 3/8" (10 mm) stroke length.  • Uses PSA coated and non-woven nylon sheets and rolls.  • Quality constructed pad is weight-mated to tool for low vibration, smooth operation and superior finishes.  Model 57400  Non-Vacuum  • Includes 2-3/4" wide x 8" long vinyl-face non-vacuum Sanding Pad (57454).  57405 Versatility Kit  • Includes 57400 Dynaline; 57852 Sanding Pad (3-2/3" wide x 7" long premium urethane, long nap, hook-face pad); plus medium grade (94951) and very fine (94956) abrasive impregnated non-woven nylon sheets.   Model 57401  Self-Generated Vacuum  • Ready for connection to optional portable self-contained dust collection systems.  • Includes 2-3/4" wide x 8" long vinyl-face, vacuum sanding pad (57455).   SHEETS  2-3/4" x 8" (70 mm x 203 mm)  ROLLS  2-3/4" (203 mm) wide   Dust Collection Systems: Page 156  • Abrasive Sheets, Rolls: Page 221  • Sanding Pads: Page 177   Model Motor Motor Sound Maximum Air Flow Hose I.D. Size Air Inlet Weight Length Height Number hp (W) RPM Level SCFM (LPM) Inch (mm) Thread Pound (kg) Inch (mm) Inch (mm)  57400 .3 (186) – 85 dB(A) 18 (510) 1/4 (6) 1/4" NPT 2.6 (1.2) 7 (178) 3-3/4 (95) 57401 .3 (186) – 84 dB(A) 18 (510) 1/4 (6) 1/4" NPT 2.6 (1.2) 7 (178) 3-3/4 (95) 57404 .3 (186) – 85 dB(A) 18 (510) 1/4 (6) 1/4" NPT 2.6 (1.2) 7 (178) 3-3/4 (95) 57407 .3 (186) – 85 dB(A) 18 (510) 1/4 (6) 1/4" NPT 2.6 (1.2) 7 (178) 3-3/4 (95) Tune-Up Kit: No. 96107 (page 192)  • Additional Specifications: Air Pressure 90 PSIG (6.2 Bar)   Model 57401  Model 57407 Model 57404   Dynaline achieves in-line scratch pattern on stainless steel by powering non-woven nylon abrasives on long nap hook-face pad.   Model 57400   Model 57407  Non-Vacuum Model with Clips  • Includes 2-3/4" wide x 8" long vinyl-face non-vacuum Sanding Pad with clips (57460).  • Accepts abrasives 2-3/4" wide x 11" long.  • Up to four abrasive sheets may be attached, ideal for high-production workplaces.   50617 Portable Dust Collection Systems (see page 156).   Model 57404  Central Vacuum  • Has 1" outside diameter vacuum port for easy central vacuum hose connection.  • Includes 2-3/4" wide x 8" long vinyl-face, vacuum sanding pad (57455).   Clip  Clip   In-Line Motion  (All models on page)   Create custom profile pads with 57480 Make Your Own Pad Kit. (57494 Refill Kit also available.)   GEAR-DRIVEN AND FINISHING SANDERSGEAR-DRIVEN AND FINISHING SANDERS   Model 57400     74 Mini-Orbital Sander Air-Powered Right Angle Finishing Sander   For Quick, Efficient Removal of Dust Nibs and Defects   • Ideal for use on gelcoat and clearcoat paint systems, plus finesse sanding of small areas.  • Precise 1/8" orbital action minimizes swirl marks.  • Lightweight design for operator comfort.  • Front and rear exhaust models available.  • Each model includes 95848 Gear Oil and 95541 Push-Type Gun, for lubricating tool gears through “dual wick” system. Increasing gear life extends the life of your tool!  • Optional safety-lock throttle lever is available (included in some regions).  Model 58037  Front Exhaust  Model 58039  Rear Exhaust  • Each model runs at 12,000 RPM and includes 1-1/4" diameter rubber sanding pad (54018). Also accepts optional sanding pads 54017, 54084 and 54088 (see page 180).   ABRASIVE DISCS  1-1/4" (32 mm) diameter   Gear Oil and Gun: Page 205  • Abrasive Discs: Page 205  • Sanding Pads: Page 180   Model Motor Motor Sound Maximum Air Flow Hose I.D. Size Orbit Air Inlet Weight Length Height    Number Exhaust hp (W) RPM Level SCFM Inch (mm) Inch (mm) Thread lb (kg) Inch (mm) Inch (mm)  58034 Rear .4 (298) 12,000 79 21 (595) 1/4" (6) 1/8 (3) 1/4" NPT 1.4 (0.6) 7.5 (190) 4 (102) 58035 Front .4 (298) 15,000 85 21 (595) 1/4" (6) 1/8 (3) 1/4" NPT 1.6 (0.7) 5.4 (137) 3.8 (97) 58037 Front .4 (298) 12,000 85 20 (566) 1/4" (6) 1/8 (3) 1/4" NPT 1.6 (0.7) 5.4 (137) 3.8 (97) 58038 Front .4 (298) 12,000 85 20 (566) 1/4" (6) 1/8 (3) 1/4" NPT 1.6 (0.7) 5.4 (137) 4 (102) 58039 Rear .4 (298) 12,000 79 21 (595) 1/4" (6) 1/8 (3) 1/4" NPT 1.4 (0.6) 7.5 (190) 3.8 (97) Tune-Up Kit: No. 96179 (page 192)   Model 58038  Front Exhaust  Model 58034  Rear Exhaust  • Each model runs at 12,000 RPM and includes 1-1/4" diameter locking-type foam-face sanding pad (54031). Also accepts optional locking-type sanding pads 54018 and 54033 (see page 180).   Model 58035  Front Exhaust  • Tool runs at 15,000 RPM and includes 1-1/4" diameter vinyl-face sanding pad (54088). Also accepts optional sanding pads 54087 and 54088 (see page 180).   Model 58039  Model 58038   Right Angle Mini-Orbital Sander’s precise 1/8" orbital action is effective for dry and wet applications (with water from an outside source).   Model 58035   58037 Right Angle Mini-Orbital Sander is ideal for quick spot repair.   Model 58035   58035 Mini-Orbital Sander shown with optional 95745 Speed Control.   Orbital Motion  (All models on page)   GEAR-DRIVEN AND FINISHING SANDERSGEAR-DRIVEN AND FINISHING SANDERS   Model 58037  Model 58037     Wet Dynorbital® Supreme ............................ 76 Right Angle Wet Sander .............................. 78  Wet Dynafine® .......................................... 79 Wet Dynabug® “Model T” ............................ 80     76 Wet Dynorbital ® Supreme Air-Powered Wet Random Orbital Sander   For Polishing and Finishing Flats and Sides   • Achieves the ultimate in swirl-free finishes.  • Wet sanding reduces airborne dust, improving air quality of workplace.  • Overskirt shroud is standard on all models, to control water splash.  • Accepts diamond abrasive discs as well as microfinishing film and conventional wet discs.  • Includes non-vacuum hook-face sanding pad  (short nap), 3/8" thick.   Basic Models  • For those not requiring “through-the-tool” water feed (who prefer to use a hose or spray bottle).   Model 57570  3-1/2" Diameter, 3/16" Orbit  • Includes 54311 Hook-Face Pad.   Model 57572  5" Diameter, 3/16" Orbit  Model 57582  5" Diameter, 3/32" Orbit  • Both models include 54325 Hook-Face Pad.   Model 57574  6" Diameter, 3/16" Orbit  Model 57584  6" Diameter, 3/32" Orbit  • Both models include 54327 Hook-Face Pad.   ABRASIVE DISCS   3-1/2" (89 mm), 5" (127 mm), 6" (152 mm) diameter   Portable Wet Tank Assembly: Page 206  • Accessories: Page 159   After using wet tool, wipe tool down with  a clean, dry rag and let dry. Then store tool with sanding pad face down.   Basic Models  Abrasives Sold Separately Deluxe Models (see page 77)   Model Motor Motor Pad Dia. Sound Maximum Air Flow Hose I.D. Size Air Inlet Tool Weight Length Height Number hp (W) RPM Inch (mm) Level SCFM (LPM) Inch (mm) Thread Thread Pound (kg) Inch (mm) Inch (mm)  57570 .24 (179) 10,000 3-1/2 (89) 76 dB(A) 16 (453) 1/4 (6) 1/4" NPT 5/16"-24 Female 2.1 (1.0) 6 (152) 3-3/4 (95) 57572 .24 (179) 10,000 5 (127) 77 dB(A) 16 (453) 1/4 (6) 1/4" NPT 5/16"-24 Female 2.1 (1.0) 6-1/2 (165) 3-5/8 (92) 57574 .24 (179) 10,000 6 (152) 74 dB(A) 16 (453) 1/4 (6) 1/4" NPT 5/16"-24 Female 2.2 (1.0) 7 (178) 3-1/2 (89) 57582 .24 (179) 10,000 5 (127) 77 dB(A) 16 (453) 1/4 (6) 1/4" NPT 5/16"-24 Female 2.1 (1.0) 6-1/2 (165) 3-5/8 (92) 57584 .24 (179) 10,000 6 (152) 74 dB(A) 16 (453) 1/4 (6) 1/4" NPT 5/16"-24 Female 2.2 (1.0) 7 (178) 3-1/2 (89) Tune-Up Kit: No. 96018 (page 192)  • Additional Specifications:  Air Pressure 90 PSIG (6.2 Bar)   3/16" (5 mm) Dia. Random Orbit  For Swirl-Free Finishes   3/32" (2 mm) Dia. Random Orbit  For Ultra-Fine Finishes   Model 57574   WET SANDERSWET SANDERS   Abrasives Sold Separately Basic Models Deluxe Models (see page 77)     77  Wet Dynorbital ® Supreme Air-Powered Wet Random Orbital Sander   For Polishing and Finishing Flats and Sides   Deluxe Models  • Deluxe models include 1/4" diameter x 11' long water line and 1/4" diameter x 10' long air line, both neatly contained  in 3/4" diameter overhose.  • Incldes adjustable “water feed” valves at two locations:  one near the water source connection and another at the tool.  This allows one valve to be pre-set to your desired flow rate,  while the other is utilized as an on/off valve.   Model 57571  3-1/2" Diameter, 3/16" Orbit  • Includes 54311 Hook-Face Pad.   Model 57573  5" Diameter, 3/16" Orbit  Model 57583  5" Diameter, 3/32" Orbit  • Both models include 54325 Hook-Face Pad.   Model 57575  6" Diameter, 3/16" Orbit  Model 57585  6" Diameter, 3/32" Orbit  • Both models include 54327 Hook-Face Pad.   ABRASIVE DISCS   3-1/2" (89 mm), 5" (127 mm), 6" (152 mm) diameter   Portable Wet Tank Assembly: Page 206  • Accessories: Page 159   95964 Hose Bib Fitting (standard 1" to fit  garden hose, etc.)  95965 Water Flow Adjustment 95963 1/8" Female Quick Disconnect 1/8" male thread connects to water source or hose bib  95816 Air Line (1/4" dia.)1/4" NPT female air supply connection   Water and Air Source Connections   95962 1/8" Male Quick Disconnect   95958 Overhose   95955 Water Line (1/4" diameter, connects to tool’s water flow adjustment valve)   Deluxe tools include  preassembled hook-ups   1/4" NPT male thread connects to tool   Connections to Deluxe Tools   95956 Custom Cuff (fits tool end)   95958 Overhose   95884 Clamp   Model Motor Motor Pad Dia. Sound Maximum Air Flow Hose I.D. Size Air Inlet Tool Weight Length Height Number hp (W) RPM Inch (mm) Level SCFM (LPM) Inch (mm) Thread Thread Pound (kg) Inch (mm) Inch (mm)  57571 .24 (179) 10,000 3-1/2 (89) 76 dB(A) 16 (453) 1/4 (6) 1/4" NPT 5/16"-24 Female 2.1 (1.0) 6 (152) 3-3/4 (95) 57573 .24 (179) 10,000 5 (127) 77 dB(A) 16 (453) 1/4 (6) 1/4" NPT 5/16"-24 Female 2.1 (1.0) 6-1/2 (165) 3-5/8 (92) 57575 .24 (179) 10,000 6 (152) 74 dB(A) 16 (453) 1/4 (6) 1/4" NPT 5/16"-24 Female 2.2 (1.0) 7 (178) 3-1/2 (89) 57583 .24 (179) 10,000 5 (127) 77 dB(A) 16 (453) 1/4 (6) 1/4" NPT 5/16"-24 Female 2.1 (1.0) 6-1/2 (165) 3-5/8 (92) 57585 .24 (179) 10,000 6 (152) 74 dB(A) 16 (453) 1/4 (6) 1/4" NPT 5/16"-24 Female 2.2 (1.0) 7 (178) 3-1/2 (89) Tune-Up Kit: No. 96018 (page 192)  • Additional Specifications:  Air Pressure 90 PSIG (6.2 Bar)   Wet Dynorbital ®Supreme achieves swirl-free finish.   Model 58585   Model 57571   3/16" (5 mm) Dia. Random Orbit  For Swirl-Free Finishes   3/32" (2 mm) Dia. Random Orbit  For Ultra-Fine Finishes   WET SANDERSWET SANDERS     78   • All models run 5", 6", or 8" diameter polishing pads. Pads sold separately.  • Accepts variety of abrasive products including WetorDry ®  discs, Scotch-Brite® surface conditioning discs and film- backed discs.  • Water is fed through the center of pad directly to the work surface, providing optimum flushing of work surface and pad. This prevents buildup of sanding residue on the disc, allowing the tool to be used efficiently in any position. Independent water rinse allows flushing of the work  surface without starting the tool.  • Rear exhaust muffler reduces noise levels. Conventional rotary action with lubricated gears. High torque air motor has variable speed.  • Safety-lock throttle and soft-grip handle (adjusts to left or right hand).   Right Angle Wet Sander Air-Powered Wet Rotary Sander   For Slow-Speed Polishing, Buffing and Finishing   ABRASIVE DISCS   5" (127 mm), 6" (152 mm), 8" (203 mm) diameter   Portable Wet Tank Assembly: Page 206  • Accessories: Page 159   Model Motor Motor Pad Dia. Sound Maximum Air Flow Hose I.D. Size Air Inlet Tool Weight Length Height Number hp (W) RPM Inch (mm) Level SCFM (LPM) Inch (mm) Thread Thread Pound (kg) Inch (mm) Inch (mm)  51474 .7 (522) 0-2,000 6 (152) 82 dB(A) 43 (1,218) 3/8 (10) 1/4" NPT 5/8"-11 Male 4.8 (2.2) 13 (330) 3-1/8 (79) 51476 .7 (522) 0-3,100 6 (152) 80 dB(A) 41 (1,161) 3/8 (10) 1/4" NPT 5/8"-11 Male 4.8 (2.2) 13 (330) 3-1/8 (79) 51479 .7 (522) 0-3,100 6 (152) 81 dB(A) 43 (1,218) 3/8 (10) 1/4" NPT M14 Male 4.8 (2.2) 13 (330) 3-1/8 (79) Tune-Up Kit: No. 96178 (page 192)  • Additional Specifications:  Air Pressure 90 PSIG (6.2 Bar)   Model 51479   Model 51479   Scotch-Brite and WetorDry are registered trademarks of 3M Company.   As 51479 is run, water is fed through pad center directly to work surface.   After using your wet tool, wipe the tool down with a clean, dry rag and let dry. Then store the tool with the sanding pad face down.   Rotary Orbit Motion  (All models on page)   WET SANDERSWET SANDERS   Basic Models  Model 51474  0-2,000 RPM  Model 51476  0-3,100 RPM  • Without pre-assembled hook-ups for those not requiring “through-the-tool” water feed (for those who prefer to use a hose or spray bottle).   Deluxe Model  Model 51479  0-3,100 RPM  • Includes pre-assembled hook-ups and an overhose assembly (further reduces sound level); 96323 Air Line 3/8", 95848 Gear Oil (2.5 oz. tube) and 95541 Grease Gun.   Pad sold separately.     79  Wet Dynafine ®   Air-Powered Wet Orbital Sander   Ideal for Removing Imperfections in Clearcoat and Gelcoat Paint Systems   Model 57902  13,000 RPM  • Features our unique “All-in-One” Misting System. The operator can spray the work surface, then remove the imperfection – all within seconds!    • “All-in-One” Misting System helps flush abrasive to  achieve a consistent, repeatable finish.  • Includes 2" and 3" diameter vinyl-face sanding pads. Also accepts hook-face sanding pads, sold separately.   • Ergonomic 7˚ offset design for greater operator comfort  and control.  • Low-vibration design allows operator to comfortably run  tool for longer time periods.  • Rear exhaust directs air away from work piece; reduces sound levels.  • Insulated tool housing reduces cold air transmission to  the operator.  • Gearless design means no right-angle gears to wear out. Tool life is increased!  • Includes 3' water line with 95962 Male Quick Disconnect (1/8") fitting.  • Tool also includes 94407 Flow-Control Dynaswivel ®, for added maneuverability (see page 163).   ABRASIVE DISCS   2" (51 mm), 3" (76 mm) diameter   Portable Wet Tank Assembly: Page 206  • Accessories: Page 159   The use of a filter-regulator-lubricator will increase tool performance, extend tool life and lessen repair costs (see page 162).   Model Motor Motor Sound Maximum Air Flow Hose I.D. Size Air Inlet Weight Length Height Number hp (W) RPM Level SCFM (LPM) Inch (mm) Thread Pound (kg) Inch (mm) Inch (mm)  57902 .15 (112) 13,000 65 dB(A) 20 (566) 3/8 (10) 1/4" NPT 1.6 (0.7) 9 (229) 3-3/4 (95) Tune-Up Kit: No. 96236 (page 192)   Model 57902   Model 57902   57902 Wet Dynafine ®has “All-In-One” Misting System to wet work surface in seconds. Tool accepts vinyl or hook-face sanding pads in diameters of 2" and 3" (above).   Model 57902   Portable Wet Tank Assembly (95990) eliminates the need  for a separate hose.   WET SANDERSWET SANDERS     80 Wet Dynabug ® “Model T”  Turbine Air-Powered Orbital Sander   Excellent on Primer and Clearcoat   • Each model includes all hardware for self-siphoning with 20 ft. of water hose. Brass weight drops into bucket for ease of use.  • Lightweight...only 1.5 lbs.!  Palm-style, ergonomic design features low profile grip for greater operator comfort  and control.  • Up to 3/16" diameter orbital action, with adjustable  speed control.  • 5" and 6" diameter pads are interchangeable.  • Fast, smooth and uniform surface preparation; reduces labor time.  • Our unique water feed “through-the-pad” design allows use of standard round wet paper with holes. No special sand paper or hole punch needed!  • Fingertip control valve allows for precise water flow.   Model 57908  5" Diameter  • Includes standard 58086 Hook-Face Pad and soft 53978 Interface Pad for contours.   Model 57909  6" Diameter  • Includes standard 58093 Hook-Face Pad and soft 53980 Interface Pad for contours.   ABRASIVE DISCS   5" (127 mm), 6" (152 mm) diameter   Abrasive Discs: Page 215  • Accessories: Page 159   Model Motor Motor Pad Dia. Sound Maximum Air Flow Hose I.D. Size Air Inlet Weight Length Height Number hp (W) RPM Inch (mm) Level SCFM (LPM) Inch (mm) Thread Pound (kg) Inch (mm) Inch (mm)  57908 N/A 20,000 5 (127) 72 dB(A) 17 (481) 1/4 (6) 1/4" NPT 1.5 (0.7) 8 (203) 4 (102) 57909 N/A 20,000 6 (152) 72 dB(A) 17 (481) 1/4 (6) 1/4" NPT 1.5 (0.7) 8 (203) 4 (102) Tune-Up Kit: No. 96169 (page 192)  • Additional Specifications:  Air Pressure 90 PSIG (6.2 Bar)   Model 57908 Model 57908   Turbine-style vaneless air motor NEEDS NO OIL!   Wet Dynabug ®“Model T” is ideal for fast, smooth surface preparation.   Wet sanding helps contain dust particles from sanding, thus enhancing the quality  of air in the workplace.   WET SANDERSWET SANDERS     Dynabuffer .............................................. 82 “Two-Step” Repair System .......................... 83 3" Dia. Buffers ........................................ 84 5"-8" Buffers .......................................... 87   6"-8" Buffers .......................................... 88 Straight-Line Buffer .................................. 89 Electric Buffer .......................................... 89 Random Orbital Polishers/Head Kit .................. 90     82 Dynabuffer Air-Powered Buffing Tool   Ideal for use in Two-Step Polishing System (see page 83)   BUFFERS AND POLISHERS   • Offered in 3" and 5" diameters, Dynabuffer moves backup pad and optional polishing buff in 14 mm diameter offset orbit.  • Each model runs at 10,000 RPM free speed, then slows to indicated speed under load.  • Patented balancer compensates for vibration when running under load, resulting in a smooth operating performance. (Patent 6,206,771).  • Rear exhaust muffler design reduces sound levels.  • For best performance, use 95676 Coupler/Plug Assembly (see page 161).   BUFFERS AND POLISHERS   POLISHING BUFFS   3" and 5" diameter (76 mm and 127 mm)   Polishing Buffs: Page 179  • Accessories: Page 159   For most efficient polishing, place approximately 10 lbs. of pressure  on pad while Dynabuffer is in use.   To prevent “slinging”of the polishing compound, keep Dynabuffer ON the work surface as you stop the tool.   Model Motor Motor Sound Maximum Air Flow Hose I.D. Size Air Pressure Tool Weight Length Height Number hp (W) RPM Level SCFM (LPM) Inch (mm) PSIG (Bar) Thread Pound (kg) Inch (mm) Inch (mm)  57126 .16 (119) 7,000 74 dB(A) 20 (566) 3/8 (10) 80 (5.5) 5/16"-24 Female 2.0 (0.9) 8-1/4 (210) 3-1/8 (80) 58455 .21 (157) 5,500 85 dB(A) 16 (453) 1/4" (8) 90 (6.2) 5/16"-24 Female 2.7 (1.2) 11 (277) 4-15/16 (125) Tune-Up Kit: 3" Model – No. 96537; 5" Model – No. 96122 (page 192)  • Additional Specifications:  Air Inlet Thread 1/4" NPT   Model 57126  3" Diameter  • Excellent for buffing out sanding scratches.  • Tool slows to 7,000 RPM when running under load.   • Optimum air pressure for this model is 80 PSIG.  • Non-marring housing cover is insulated for operator comfort.  • Throttle lever may be positioned for right or left hand operation. Optional 01462 Safety-Lock Lever available.  • Tool includes 56145 Hook-Face backup pad, and 97166 Hanger Bracket. Polishing buffs are sold separately.  • Optional 53163 Side Handle available.   Model 58455  5" Diameter  • Tool slows to 5,000 RPM when running under load.  • Shown with optional 56195 Hook-Face Random Orbital Sanding Pad, and optional polishing pad.  • Optimum air pressure for this model is 90 PSIG.   Model 57126   Model 57126   Model 58455   57126 Dynabuffer is ideal for repairing minor surface defects in clear coat.   14 mm Dia. Random Orbital Motion   14 mm Dia. Random Orbital Motion     83  “Two-Step” System Utilizing Mini-Orbital Sander and Dynabuffer   A Proven Method for Repairing Minor Surface Defects in Clearcoat   BUFFERS AND POLISHERSBUFFERS AND POLISHERS   Polishing Buffs: Page 179  • Accessories: Page 159   STEP ONE  Choose One of These Tools:  Model 58037  12,000 RPM  Right Angle Mini-Orbital Sander  • See page 74 for full details.  (Various models may be used.)  Model 57502  7,500 RPM  Palm-Style Mini-Dynorbital® Sander  • See page 54 for full details.  Model 57503 (5,000 RPM) may also be used.   STEP ONE Procedure:  Using one of these tools, attach abrasive disc to sanding pad, then apply water to the abrasive. Place the sanding pad on the defect, positioning it slightly off-center, and apply slight pressure. Throttle the tool on and sand in a random motion for two seconds. Keep the sanding pad FLAT while sanding, letting the tool and abrasive do the work. Try to keep the sanded area as small as possible. Remove tool from surface and throttle tool off (“start on, stop off”). Wipe surface dry with a clean soft cloth.   Model 58037 (12,000 RPM)   STEP TWO  Choose One of These Tools:  Model 57126 Dynabuffer  3" Diameter  • See page 82 for full details.  Model 58455 Dynabuffer  5" Diameter  • See page 82 for full details.   STEP TWO Procedure:  Apply a small amount of polishing compound to buffing pad on Dynabuffer, spreading compound evenly to precondition pad. Then apply small drop of polishing compound to work surface, and use the pad to spread compound evenly over sanded area. Place the pad on the sanded area and apply pressure (approximately 3 lbs. of pressure with 3" diameter tool, and 10 lbs. of pressure with 5" diameter tool). Throttle the tool on, and adjust pressure to minimize vibration (finding the “sweet spot”). Then move pad in a random motion for ten seconds, keeping pad flat or tipped slightly forward. This will eliminate compound slinging, swirl marks, haze and scratches. Wipe the area clean with a soft cloth and  inspect. If imperfections are still visible, repeat process  as needed.   Model 57126   Model 57126   Model 58455   Left: 58037 Right Angle Mini-Orbital Sander sands a defect in clearcoat. 57126 Dynabuffer polishes clearcoat as “step two”.   Model 57502 (7,500 RPM)   Model 58037 Model 58037 Model 57126     84 3" Diameter Buffers .25 hp, Air-Powered Buffing Tool     For Repair of Sanding Scratches on Clearcoat   BUFFERS AND POLISHERS   Model 57550  3" Diameter, 2,400 RPM  • Excellent for buffing and polishing fiberglass, plastics and other materials.  • Includes 50125 rigid 3" backing pad, 90027 Terry Cloth Pad and 90028 Wool Pad.  • Low profile housing; rear exhaust; lever throttle.  • Shown with optional 94300 Dynaswivel ® and optional 94990 Coupler/Plug Assembly (see page 161).   BUFFERS AND POLISHERS   TERRY CLOTH, WOOL, FOAM BUFFS  3" (76 mm) diameter   Polishing Buffs: Page 179  • Accessories: Page 159   Use Dynabrade Finesse Sanding Cream and Dynabrade Glaze to achieve a superior high gloss finish after compounding.   Roloc is a registered trademark of 3M Company   Model 57553  Versatility Kit  • Efficiently repair dust nibs and scratches on clear coat.  • Quick, simple spot repair on painted surfaces.  • Mini Random Orbital Sander; 3" Buffer; 3-1/2" Disc Sander.  • Includes: 2,400 RPM basic tool; 54476 Mini-Orbital Head; 3" backing pad; 1-1/4" and 3-1/2" dia. vinyl-face pads; 3" dia. terry cloth bonnet, wool bonnet and foam “flat face” pad; 95723 Dynabrade Finesse-It Creme; 95727 Dynabrade Glaze, sample discs and sample abrasive pack. (14 mm and 19 mm wrenches also included; not shown.)   Model Motor Motor Sound Maximum Air Flow Hose I.D. Size Air Inlet Tool Weight Length Height Number hp (W) RPM Level SCFM (LPM) Inch (mm) Thread Thread Pound (kg) Inch (mm) Inch (mm)  57550 .25 (186) 2,400 82 dB(A) 18 (510) 1/4 (6) 1/4" NPT 1/4"-20 Male 1.9 (.9) 5-3/8 (137) 4-1/4 (108) Tune-Up Kit: No. 96107 (page 192)  • Additional Specifications:  Air Pressure 90 PSIG (6.2 Bar)   Model 57553   57550 Palm-Style Buffer utilized on a solid surface sink bowl.   Model 57550   Model 57550   Rotary Orbital Motion   3/16" (5 mm) Dia. Orbit  (with 54776 Head Attached)   90028 90027  90038  54018  54476  50125 95723 95727   54486   Model 57553 95723 95727   50125  54476 54018   54486     85  3" Diameter Buffers .4 hp, Air-Powered Buffing Tool   For Repair of Sanding Scratches on Clearcoat    BUFFERS AND POLISHERS   Model 53440  3" Diameter,  3,200 RPM  • Tool comes mounted with 54021 Adapter (1/4"-20  male thread).  • Includes 50120 Hook-Face Pad (3" diameter), which mounts directly to 54021 Adapter.  • Also includes 90027 Terry Cloth Bonnet and 90028  Wool Buffing Bonnet.  • Rear exhaust, lever throttle, rotary action.   BUFFERS AND POLISHERS   TERRY CLOTH, WOOL, FOAM BUFFS  3" (76 mm) diameter   Polishing Buffs: Page 179  • Accessories: Page 159   Model 53403  Versatility Kit  • Repair dust nibs and scratches on clearcoat.  • Includes: 3,200 RPM air tool, 54028 Random Orbital Sanding Head, two sanding pads, 50120 Hook ’n Loop Pad for bonnets, 54021 Adapter, wool and terry cloth bonnets, 95723 Finesse Sanding Creme, 95727 Dynabrade Glaze, assorted wrenches and sample abrasives. Note: Optional 54585 Side Handle Assembly available.   Model Motor Motor Sound Maximum Air Flow Hose I.D. Size Air Inlet Tool Weight Length Height Number hp (W) RPM Level SCFM (LPM) Inch (mm) Thread Thread Pound (kg) Inch (mm) Inch (mm)  53440 .4 (298) 3,200 83 dB(A) 23 (651) 1/4 (6) 1/4" NPT 1/4"-20 Female 1.9 (.9) 11-3/8 (289) 2-3/4 (70) Tune-Up Kit: No. 96333 (page 192)  • Additional Specifications:  Air Pressure 90 PSIG (6.2 Bar)   Model 53440   Model 53440   Tool has 1/4"-28 female thread with 54021 Adpater removed.   Model 53440 achieves high gloss finish when used with Dynabrade Finesse Sanding Creme and Dynabrade Glaze (each sold separately).   Dynaswivel ® air line connector is ideal for use with most air tools. The Dynaswivel  ® improves tool maneuverability, minimizes operator fatigue and extends hose life. (See page 163.)   Rotary Orbital Motion   3/16" (5 mm) Dia. Orbit  (with 54028 Head Attached)  Model 53403  54028  5402150120 54018  90028  90027 54017  95723  95727     86   Model 53465   95727 54017  95848 95542  95541  95541  54018  54028  54021 90028 90027  95723  95262  95281 50120   BUFFERS AND POLISHERS   3" Diameter, 7° Offset, Rear Exhaust  • 7° offset ergonomic design for control and comfort.  • High torque planetary-geared air motor; muffler reduces sound level.  • Standard rotary action.  Model 51400  3,200 RPM  Model 51401  5,000 RPM  • Includes 50126 Hook-Face Pad, 90027 Terry Cloth Bonnet and 90028 Wool Buffing Bonnet.   • 3/8"-24 Male Thread.  51405 Versatility Kit  • Includes: 51400 air tool; 3" hook-face backing pad,  terry cloth bonnet, wool bonnet and foam “flat face” pad; Dynabrade Finesse-It Creme; Dynabrade Glaze and 14 mm open end wrench (not shown).   BUFFERS AND POLISHERS   Polishing Buffs: Page 179  • Accessories: Page 159   Model Motor Motor Sound Maximum Air Flow Hose I.D. Size Air Inlet Tool Weight Length Height Number hp (W) RPM Level SCFM (LPM) Inch (mm) Thread Thread Pound (kg) Inch (mm) Inch (mm)  51400 .4 (298) 3,200 80 dB(A) 24 (680) 3/8 (10) 1/4" NPT 3/8"-24 Male 1.7 (.8) 8-3/4 (222) 4-1/4 (108) 51401 .4 (298) 5,000 78 dB(A) 24 (680) 3/8 (10) 1/4" NPT 3/8"-24 Male 1.7 (.8) 8-3/4 (222) 4-1/4 (108) Tune-Up Kit: No. 96174 (page 192)  • Additional Specifications:  Air Pressure 90 PSIG (6.2 Bar)   Model 51400 Model 51400 achieves high gloss finish when used with 95723 Dynabrade Finesse Sanding Creme and 95727 Dynabrade Glaze (each sold separately).   Model 51405   3" Diameter Buffers .4 hp, Air-Powered Buffing Tools   For Quick and Easy Spot Repair on a Variety of Surfaces   3" Diameter, .4 hp, Right Angle, Rear Exhaust  Model 53460  3,200 RPM  • Features high torque, variable speed air motor. Lubricated gears; rotary action.  • Tool comes with 50122 Hook-Face backup pad, 3" diameter.  • Includes 90027 Terry Cloth Bonnet and 90028 Wool Buffing Bonnet.  53465 Sander/Buffer Versatility Kit  • All that is needed for quick, simple spot repair on a variety of surfaces.  • Includes: Model 53417 Air Tool (3,200 RPM) with 54028 Random Orbital Sanding Head; 54021 Adapter (1/4"-28 to 1/4"-20 male); 54017 Vinyl Sanding Pad (3/4" dia.) 54018 Vinyl Sanding Pad (1-1/4" dia.); 50120 Hook-Face Pad (3" dia.); 90027 Terry Cloth Bonnet (3” dia.); 90028 Wool Buffing Pad (3" dia.); 95727 Dynabrade Glaze; 95723 Finesse Sanding Creme; 95848 Gear Oil; 95542 Grease; two 95541 Grease Guns; 95262 Wrench (14 mm); 95281 Wrench (19 mm); and sample abrasives.  • Refer to the Random Orbital Sander section (page 57) for the 53417 Mini-Dynorbital® tool specifications.   POLISHING BUFFS   3" and 6"-8" diameter (76 mm, 152 mm - 203 mm)   Rotary Orbital Motion   Model Motor Motor Sound Maximum Air Flow Hose I.D. Size Air Inlet Tool Weight Length Height Number hp (W) RPM Level SCFM (LPM) Inch (mm) Thread Thread Pound (kg) Inch (mm) Inch (mm)  53460 .4 (298) 3,200 81 dB(A) 21 (595) 1/4 (6) 1/4" NPT 3/8"-24 Male 1.9 (.9) 7 (178) 2-3/4 (70) Tune-Up Kit: No. 96179 • Additional Specifications: Air Pressure 90 PSIG (6.2 Bar)   Model 53460 Model 51400     87  5"-8" Diameter Buffers .4 hp and .7 hp, Air-Powered Buffing Tools   Excellent for Buffing and Polishing Fiberglass, Plastics and Other Materials   BUFFERS AND POLISHERS   5" - 8" Diameter, 7° Offset, .7 hp  • Conventional rotary action.  • 7° offset ergonomic design for control and comfort.  • High torque planetary-geared air motor; muffler reduces sound level.  • Includes safety-lock lever and soft-grip handle.  • Backup pad and polishing pad sold separately.  Model 51450  3,400 RPM, 5/8"-11 Male Thread  Model 51451  4,500 RPM, 5/8"-11 Male Thread  Model 51454  3,400 RPM, M14 Male Thread   Model 51455  4,500 RPM M14 Male Thread   BUFFERS AND POLISHERS   POLISHING ACCESSORIES  5", 6" and 8" diameter (127 mm, 152 mm, 203 mm)   Polishing Buffs: Page 179  • Accessories: Page 159   51450 Polisher shown with optional backup pad and optional polishing pad.   Model 51450   5" Diameter, 7° Offset, .4 hp  Model 51430  3,200 RPM  • Includes 50147 Hook-Face Pad and 90040 Foam “Flat Face” Buffing Pad.  • Shown with optional 13141 Side Handle/Collar Assembly.   • 3/8"-24 Male Thread.  • Extended muffler design.   Model Motor Motor Sound Maximum Air Flow Hose I.D. Size Air Inlet Tool Weight Length Height Number hp (W) RPM Level SCFM (LPM) Inch (mm) Thread Thread Pound (kg) Inch (mm) Inch (mm)  51430  .4 (298) 3,200 80 dB(A) 24 (680) 3/8 (10) 1/4" NPT 3/8"-24 Male 2.4 (1.1) 9-3/4 (248) 4-1/2 (114) 51450/ 51454 .7 (522) 3,400 78 dB(A) 46 (1,303) 3/8 (10) 1/4" NPT 5/8"-11 Male/M14 4.1 (1.9) 10-4/5 (275) 5-4/5 (148) 51451/ 51455 .7 (522) 4,500 79 dB(A) 46 (1,303) 3/8 (10) 1/4" NPT 5/8"-11 Male/M14 4.1 (1.9) 10-4/5 (275) 5-4/5 (148) Tune-Up Kit: 6" Models – No. 96234; Collet Models – No. 96174 (page 192)  • Additional Specifications:  Air Pressure 90 PSIG (6.2 Bar)   Model 51430   Dynaswivel ® air line connector is ideal for use with most air tools. The Dynaswivel  ® improves tool maneuverability, minimizes operator fatigue and extends hose life. (See page 163.)  Rotary Orbital Motion  (All models on page)   The use of a filter-regulator- lubricator will increase tool performance, extend tool life and lessen repair costs. (See page 162.)   Model 51450     88   6"-8" Diameter, 1 hp  • Ideal for use with optional 6" to 8" buffing accessories.  • Highest quality air motor has variable speed.  • Planetary gear set is easily lubricated for extended tool life.  • Safety-lock throttle and soft-grip handle (adjusts to left or right hand).   5/8"-11 Male Thread M14 Male Thread  Model 51390  1,250 RPM Model 51394  1,250 RPM  Model 51391  1,800 RPM Model 51395  1,800 RPM  Model 51392  2,800 RPM Model 51396  2,800 RPM  Model 51393  4,500 RPM Model 51397  4,500 RPM   Model 51390   6"-8" Diameter Buffers 1 hp, Air-Powered Buffing Tools   For Quick and Easy Spot Repair on a Variety of Surfaces   BUFFERS AND POLISHERSBUFFERS AND POLISHERS   POLISHING BUFFS   6"-8" diameter (152 mm - 203 mm)   Polishing Buffs: Page 179  • Accessories: Page 159   Model Motor Motor Sound Maximum Air Flow Hose I.D. Size Air Inlet Tool Weight Length Height Number hp (W) RPM Level SCFM (LPM) Inch (mm) Thread Thread Pound (kg) Inch (mm) Inch (mm)  51470/ 51600 .7 (522) 0-2,000 82 dB(A) 41 (1,161) 3/8 (10) 1/4" NPT 5/8"-11 Male/M14 4.8 (2.2) 13 (330) 3-1/8 (79) 51472/ 51601 .7 (522) 0-3,100 80 dB(A) 41 (1,161) 3/8 (10) 1/4" NPT 5/8"-11 Male/M14 4.8 (2.2) 13 (330) 3-1/8 (79) Tune-Up Kit: 6"-8" Models – No. 96178 (page 192)  • Additional Specifications: Air Pressure 90 PSIG (6.2 Bar)   6"-8" Diameter, .7 hp  • Ideal for use with optional 6" to 8" buffing accessories. Safety-lock throttle included.   5/8"-11 Male Thread M14 Male Thread  Model 51470  0-2,000 RPM Model 51600  0-2,000 RPM  Model 51472  0-3,100 RPM Model 51601  0-3,100 RPM  50791 Accessory Kit  6" Diameter  50792 Accessory Kit  8" Diameter  • Includes 50828 (6" dia.) or 50829 (8" dia.) Disc Pad; 96302 Overhose Assembly; 96323 Air Line 3/8"; 95848 Gear Oil (2.5 oz. tube); 95542 Grease; 95541 Grease Gun (2).   Model Motor Motor Sound Maximum Air Flow Hose I.D. Size Air Inlet Tool Weight Length Height Number hp (W) RPM Level SCFM (LPM) Inch (mm) Thread Thread Pound (kg) Inch (mm) Inch (mm)  51390/ 51394 1 (744) 1,250 83 dB(A) 42 (1,201) 3/8 (10) 3/8" NPT 5/8"-11 Male/M14 4.5 (2.1) 13-1/8 (333) 3-3/4 (95) 51391/ 51395 1 (744) 1,800 82 dB(A) 42 (1,187) 3/8 (10) 3/8" NPT 5/8"-11 Male/M14 4.5 (2.1) 13-1/8 (333) 3-3/4 (95) 51392/ 51396 1 (744) 2,800 80 dB(A) 41 (1,167) 3/8 (10) 3/8" NPT 5/8"-11 Male/M14 4.5 (2.1) 13-1/8 (333) 3-3/4 (95) 51393/ 51397 1 (744) 4,500 79 dB(A) 35 (997) 3/8 (10) 3/8" NPT 5/8"-11 Male 4.0 (1.8) 11-11/16 (296) 3-3/4 (95) Tune-Up Kit: No. 96532 (page 192)  • Additional Specifications:  Air Pressure 90 PSIG (6.2 Bar)   Rotary Orbital Motion  (All models on page)   Model Motor Motor Maximum Air Flow Hose I.D. Size Air Inlet Air Pressure Weight Length Height Number hp (W) RPM SCFM (LPM) Inch (mm) Thread PSIG (Bar) Pound (kg) Inch (mm) Inch (mm)  51458/51459 .7 (522) 2,500 27 (765) 3/8 (10) 1/4" NPT 90 (6.2) 5.3 (2.4) 11-3/4 (301) 4 (102) Tune-Up Kit: 51459 – No. 96672; 51458 – No. 96532 (page 192)   6"-8" Diameter, .7 hp  Model 51459  5/8"-11 Male Thread  Model 51458  M14 x 2 Male Thread  • .7 hp air motor, running at 2,500 RPM.  • Standard safety-lock lever.  • Shown with optional 50853 Backup Pad and optional 90082 Polishing Pad.   Model 51459   50853 Backup Pad and 90082 Polishing Pad sold separately. 50853 Backup Pad and 90082 Polishing Pad sold separately.   Model 51470   NOTE: For old-style tools 50816, 50823 and 50851, order 50797 (6" dia.) or 50798 (8" dia.) Accessory Kit.   Model 51459     89   Electric Buffer Electric Large Diameter Polishing Tool   Achieve Fine Finish on a Variety of Surfaces   POLISHING PADS AND BUFFS  6" - 8" (152 mm - 203 mm) dia.   Straight-Line Buffer .4 hp and .7 hp, Air-Powered Models    Excellent for Buffing and Polishing Fiberglass, Plastics and Other Materials   BUFFERS AND POLISHERSBUFFERS AND POLISHERS   VARIOUS BUFFING  AND POLISHING ACCESSORIES   Polishing Buffs: Page 179  • Accessories: Page 159   Model Motor Motor Sound Maximum Air Flow Hose I.D. Size Air Inlet Tool Weight Length Height Number hp (W) RPM Level SCFM (LPM) Inch (mm) Thread Thread Pound (kg) Inch (mm) Inch (mm)  51200/ 51203 .4 (298) 950 82 dB(A) 23 (651) 1/4 (6) 1/4" NPT 3/8"-24 Male 2.1 (1.0) 10-3/8 (264) 1-5/8 (40) 51201/ 51204 .4 (298) 3,200 81 dB(A) 23 (651) 1/4 (6) 1/4" NPT 3/8"-24 Male 1.8 (0.8) 9-1/8 (232) 1-5/8 (40) 51202/ 51205 .4 (298) 5,000 84 dB(A) 23 (651) 1/4 (6) 1/4" NPT 3/8"-24 Male 1.8 (0.8) 9-1/8 (232) 1-5/8 (40) 52100/ 52103 .7 (522) 950 84 dB(A) 34 (957) 3/8 (10) 1/4" NPT 1/2"-20 Male 3.6 (1.6) 12-1/2 (318) 1-7/8 (48) 52101/ 52104 .7 (522) 3,400 82 dB(A) 35 (977) 3/8 (10) 1/4" NPT 1/2"-20 Male 2.7 (1.2) 9-1/2 (241) 1-7/8 (48) 52102/ 52105 .7 (522) 4,500 82 dB(A) 35 (977) 3/8 (10) 1/4" NPT 1/2"-20 Male 2.7 (1.2) 9-1/2 (241) 1-7/8 (48) Tune-Up Kit: .4 hp Tools – No. 96173; .7 hp Tools – No. 96260 (page 192)  • Additional Specifications:  Air Pressure 90 PSIG (6.2 Bar)   Straight-Line, Rear Exhaust  • Shown with optional 95749 Mandrel (1/2") and optional 90024 Cotton Buff Wheels (4" dia. x 1/2" wide).  • Planetary gear allows tool to run at proper speed under load to achieve desired finish.   .4 hp, 1/4" Collet .4 hp, 6 mm Collet  Model 51200  950 RPM Model 51203  950 RPM  Model 51201  3,200 RPM Model 51204  3,200 RPM  Model 51202  5,000 RPM Model 51205  5,000 RPM .7 hp, 1/4" Collet .7 hp, 6 mm Collet  Model 52100  950 RPM Model 52103  950 RPM  Model 52101  3,400 RPM Model 52104  3,400 RPM  Model 52102  4,500 RPM Model 52105  4,500 RPM   Model 52101   Rotary Orbital Motion  (All models on page)   C US   Model Motor Maximum Current Weight Length Height Number RPM Watts Out Voltage Amps Phase Frequency Pound (kg) Inch (mm) Inch (mm)  51610 0 - 3,000 835 120 V (AC)  9 1 60 Hz 4.9 (2.2) 16-5/8 (423) 5 (127)   Model 51610  120 V (AC), 5/8"-11 Male Thread  • 9 amp motor, 0-3,000 RPM (variable RPM dial).  • Double-insulated (Class II) housing, 8 ft. (2.44 m) flexible cord, and built-in tool rest.  • Shown with optional 50853 Backup Pad and optional 90082 Polishing Pad.   Model 51610   120 V (AC)   Mandrel and Wheels Sold Separately     90 Random Orbital Polishers Air and Electric Large Diameter Polishing Tools Larg   Random Orbital Polishing Leaves No Haze, Halo or Swirl Marks   BUFFERS AND POLISHERS   • Unique random orbital motion minimizes “haze” and “halo” effects, while reducing “burn through” of top coats and sealants. No haze, no halo, no swirls!  • Innovative polishing head (see below) with streamlined, lightweight design for maximum operator comfort.   • Each model includes 7" (178 mm) diameter Backing Pad (50855). Shown with optional 90082 Polishing Bonnet.   PREMIUM Air-Powered  Model 51447  5/8"-11 Male Thread  Model 51449  M14 x 2 Male Thread  • High-quality 1 hp air motor, running at 2,800 RPM.  • Planetary gear set is easily lubricated for extended tool life.   Air-Powered  Model 51446  5/8"-11 Male Thread  Model 51448  M14 x 2 Male Thread  • .7 hp air motor, running at 2,500 RPM.   BUFFERS AND POLISHERS   POLISHING PADS AND BUFFS  7" - 8" (178 mm - 203 mm) dia.   Top Handle: Page 207  • Polishing Buffs: Page 179  • Accessories: Page 159   Model Motor Maximum Current Weight Length Height Number RPM Watts Out Voltage Amps Phase Frequency Pound (kg) Inch (mm) Inch (mm)  51614 0 - 3,000 835 120 V (AC)  9 1 60 Hz 8.8 (3.9) 18-7/8 (480) 6-3/4 (172)   Model Motor Motor Maximum Air Flow Hose I.D. Size Air Inlet Air Pressure Weight Length Height Number hp (W) RPM SCFM (LPM) Inch (mm) Thread PSIG (Bar) Pound (kg) Inch (mm) Inch (mm)  51446/51448 .7 (522) 2,500 27 (765) 3/8 (10) 1/4" NPT 90 (6.2) 6.3 (2.9) 14-3/8 (366) 5-3/8 (135) 51447/51449 1 (744) 2,800 41 (1,167) 3/8 (10) 3/8" NPT 90 (6.2) 5.8 (2.7) 14-3/8 (366) 5-3/8 (135) Tune-Up Kit: 51446 – No. 96672; 51448 – No. 96532 (page 192)   C US   Electric-Powered  Model 51614  120 V (AC), 5/8"-11 Male Thread   • 9 amp motor, 0-3,000 RPM (variable RPM dial).  • Double-insulated (Class II) housing, 8 ft. (2.44 m) flexible cord, and built-in  tool rest.  • 89272 Brush Set Assembly may be  ordered separately.  • Includes 7" (178 mm) diameter Backing Pad (50855). Shown with optional 90082 Polishing Bonnet.   Random Orbital Head Kit  • Converts standard rotary tool (up to 3,200 RPM) to a Random Orbital Polisher!  • Kit Includes Random Orbital Polishing Head, 50855 Hook-Face Backing Pad  (7" [178 mm] diameter), 90082 Natural Sheepskin Polishing Pad (7" [178 mm] diameter) and 50679 Wrench (26 mm).  61374  5/8"-11 Female Thread 61375  M14 x 2 Female Thread   Model 51447 PREMIUM Air-Powered Model   Model 51446 Air-Powered Model Model 51614  61374 Random Orbital Head Kit (USA Patent no. 7,022,002)   3/4" (19 mm) Dia. Random Orbital Motion  (All models on page)   120 V (AC)     Pencil Grinders ........................................ 92 0.33 hp, 0.4 hp Die Grinders ........................ 95 0.4 hp Die Grinders .................................... 96 0.5 hp Die Grinders .................................. 101   0.55 hp Die Grinder .................................. 104 0.7 hp Die Grinders .................................. 105 1.0 hp Die Grinders .................................. 107     92   DIE GRINDERSDIE GRINDERS   Collet Inserts: Page 94  • Carbide Burrs: Page 189  • Accessories: Page 159   Pencil Grinders Rotary Vane Air Motor Models   Precision Deburring and Finishing on a Variety of Surfaces   • An ideal tool for use in casting houses, effective on cast parts of aluminum, bronze and brass. Quickly and efficiently removes gates and parting lines in cast parts.  • High-efficiency rotary vane air motor.  • Adjustable tool speed from 5,000 RPM to 25,000 RPM.  • Operate tool and adjust speed by simply rotating rear black cover.  • Tactile grip on shaft end allows fingertip control, and alerts operator to rotating collet area.  • Changing of attachment is achieved with easy, two-wrench maneuver.  • Unique housing shape allows tool to be held as a traditional Die Grinder.  Model 52861 Model 52862  1/8" Collet 3 mm Collet  Model 52863 Model 52864  1/4" Collet 6 mm Collet   CARBIDE BURRS, ROTARY FILES, MOUNTED POINTS, WHEELS AND DISCS   CARBIDE BURRS, ROTARY FILES, MOUNTED POINTS, WHEELS AND DISCS   Rotary Vane Pencil Grinder is ideal for precision deburring.   Model 52861   Model 52861   100,000 RPM Pencil Grinder offers enhanced cut rate.   Model 51810   52898 Thread Guard  Optional Thread Guard allows easy access to collet cap. With Thread Guard in place, larger diameter accessories may be run by tool. (All accessories must have maximum operating speed of 25,000 RPM).    Pencil Grinders Turbine-Driven Air Motor Models   Precision Deburring and Finishing on a Variety of Surfaces   • High-efficiency air motor has no wearable gears, vanes or blades. Oil-free operation minimizes maintenance time and repair costs.  • Air motor is controlled with patented governor, providing constant tool speed under load.  • Quality high-speed bearings are included.  • Housing has “non slip” rubber grip for additional control.  • Tactile cues on shaft end alert operator to rotating collet area.  • Changing of attachment is achieved with easy, two-wrench maneuver.  • Includes high-quality flexible air hose.   Model  Motor Collet Motor Maximum Air Flow Air Pressure Hose I.D. Size Air Inlet Weight Length Diameter Number hp (W) Size RPM Exhaust SCFM (LPM) PSIG (Bar) Inch (mm) Thread Pound (kg) Inch (mm) Inch (mm)  52861 0.4 (298) 1/8" 25,000 Rear 20 (566)  90 (6.2) 1/4 (6) 1/4" NPT 1.1 (.48) 5.66 (144)  1-1/2 (39) 52862 0.4 (298) 3 mm 25,000 Rear 20 (566)   90 (6.2) 1/4 (6) 1/4" NPT 1.1 (.48)  5.66 (144)  1-1/2 (39) 52863 0.4 (298) 1/4" 25,000 Rear 20 (566)  90 (6.2) 1/4 (6) 1/4" NPT 1.1 (.48)  5.66 (144)  1-1/2 (39)  52864 0.4 (298) 6 mm 25,000 Rear 20 (566)  90 (6.2) 1/4 (6) 1/4" NPT 1.1 (.48) 5.66 (144)  1-1/2 (39)    Model 51810   NEW! NEW!     93  Pencil Grinders Turbine-Driven Air Motor Models   Precision Deburring and Finishing on a Variety of Surfaces   DIE GRINDERSDIE GRINDERS   CARBIDE BURRS, ROTARY FILES, MOUNTED POINTS, WHEELS AND DISCS   Collet Inserts: Page 94  • Carbide Burrs: Page 189  • Accessories: Page 159   35,000 RPM   with  RED Tool Cap  Model 51706 Model 51707  1/8" Collet 3 mm Collet  Model 51756 Model 51708  1/8" Collet, Extension Model 3/32" Collet   50,000 RPM   with  GOLD Tool Cap  Model 51703 Model 51704  1/8" Collet 3 mm Collet  Model 51730 Model 51732  1/8" Collet, Ceramic Bearings 3 mm Collet, Ceramic Bearings  Model 51753 Model 51705  1/8" Collet, Extension Model 3/32" Collet   60,000 RPM   with  TEAL Tool Cap  Model 51700 Model 51701  1/8" Collet 3 mm Collet  Model 51731 Model 51733  1/8" Collet, Ceramic Bearings 3 mm Collet, Ceramic Bearings  Model 51740 Model 51742  1/8" Collet, Mount Stem 3 mm Collet, Mount Stem  Model 51750 Model 51702  1/8" Collet, Extension Model 3/32" Collet   100,000 RPM Models   with  SILVER Tool Cap  • Speed of 100,000 RPM offers enhanced cut rate. Ideal for use on metals, alloys, graphite, wood, glass and resin with high glass content.   Model 51810  1/8" Collet Model 51811  1/16" Collet  Model 51812  3/32" Collet Model 51813  3 mm Collet   Model  Motor Maximum Air Flow Air Pressure Hose I.D. Size Air Inlet Weight Length Height Number RPM Exhaust SCFM (LPM) PSIG (Bar) Inch (mm) Thread Pound (kg) Inch (mm) Inch (mm)  51706-51708 35,000 Rear 8 (227) 90 (6.2) 1/4 (6) 1/4" NPT 0.8 (0.4) 5-1/4 (132) 1-1/2 (39) 51756 35,000 Rear 8 (227) 90 (6.2) 1/4 (6) 1/4" NPT 0.8 (0.4) 6 (152) 1-1/2 (39) 51703-51705 50,000 Rear 8 (227) 90 (6.2) 1/4 (6) 1/4" NPT 0.8 (0.4) 5-1/4 (132) 1-1/2 (39) 51730 / 51732 50,000 Rear 8 (227) 90 (6.2) 1/4 (6) 1/4" NPT 0.8 (0.4) 5-1/4 (132) 1-1/2 (39) 51753 50,000 Rear 8 (227) 90 (6.2) 1/4 (6) 1/4" NPT 0.8 (0.4) 6 (152) 1-1/2 (39 51700-51702 60,000 Rear 8 (227) 90 (6.2) 1/4 (6) 1/4" NPT 0.8 (0.4) 5-1/4 (132) 1-1/2 (39) 51731/ 51733 60,000 Rear 8 (227) 90 (6.2) 1/4 (6) 1/4" NPT 0.8 (0.4) 5-1/4 (132) 1-1/2 (39) 51740 / 51742 60,000 Rear 8 (227) 90 (6.2) 1/4 (6) 1/4" NPT 0.5 (0.2) 7-3/16 (182) 1-1/2 (39) 51750 60,000 Rear 8 (227) 90 (6.2) 1/4 (6) 1/4" NPT 0.8 (0.4) 6 (152) 1-1/2 (39) 51810-51813 100,000 Rear 6 (170) 90 (6.2) 1/4 (6) 1/4" NPT .84 (.38) 5-5/16 (135) 1-1/2 (39)   Model 51756  Extension Model provides additional reach.   Model 51730  Ceramic Bearings provide better performance and durability with regard to high shaft speeds, dirt, extreme temperature and corrosion.   Model 51740  Mount Stem for use on robotic arms and other fixed mount applications.   Model 51810     94 The Choice Is Yours Dynabrade Die Grinders Offered in a Variety of Configurations  DIE GRINDERSDIE GRINDERS   Geared and Gearless Tool Offerings  • Geared Tools generally have higher torque levels, while  gearless tools offer reduced maintenance and downtime.   Two Types of Gearing   • Planetary gears are inline speed reduction gears. The higher the reduction, the higher the torque levels.  • Right angle bevel gears turn the spindle of the machine 90° from the motor. Typically there is a speed reduction but not as high as planetary gears.   Gearless Tools  • Gearless tools have lower vibration levels due to the omission of transmitting power through gears.  • They offer longer tool life with fewer wearable parts, resulting in reduced maintenance and downtime.  • Among tools with the same horsepower  rating, gearless tools will generally have  lower torque levels than geared tools.  • Look for the gearless icon (right) to  quickly identify a gearless model.   Terminology  • COLLET: Device used to hold carbide burrs, rotary files, mounted points and wheels, etc.  • BODY:The part of the collet that secures to the spindle of the tool and accepts the insert.  • CAP:Secures collet body and retains insert.  • INSERT:The collapsible portion of the collet that retains the shank of the inserted tool.   Collet Assembly Types  • Two-Piece: Insert threads into body.   • Three-Piece: Insert slips into body;  cap threads to body, retaining the insert.   • Four-Piece: Insert slips into body;  cap slips over body; nut retains cap and insert.   • Integrated: Collet body is integrated into tool.   CAP  INSERT  BODY   Exhaust and Muffler Offerings  • Choose from front exhaust, rear exhaust (with extended muffler), and rear exhaust (with standard muffler).   Front Exhaust   • Front exhaust tools direct debris away from the work surface, and do not have  a sound-reducing muffler.   Rear Exhaust   • Extended muffler design is ideal for larger hands, as the tool length is extended to accommodate the higher performing, dual-muffling technology.   • Abbreviated length of standard muffler is  ideal for smaller hands.    Die Grinder Collets and Inserts   Dynabrade Die Grinders Feature Precision-Made Collets and Inserts    ...CHOOSE COLLET... TOOL THREAD... ...THEN CHOOSE COMPATIBLE COLLET INSERT *Denotes Standard Insert Included with Collet Collet Collet Part Collet Size Number Type  1/4" 50010 3-Piece 6 mm 50015 3-Piece 1/4" 50020 2-Piece 1/4" 50080 3-Piece 6 mm 50079 3-Piece 1/4" 51124 4-Piece 6 mm 51125 4-Piece 3/8" 50018 3-Piece 1/4" 51106 4-Piece 6 mm 51110 4-Piece 1/4" 50066 3-Piece 6 mm 50073 3-Piece 1/4" 50055 2-Piece   1/8" 1/4" 3/8" 3 mm 6 mm 8 mm  50065 50013* 50014 50016 50039 50065 50013 50014 50016* 50039 01647 01644* 01648 01646 01495 01485* 01496 01497 01495 01485 01496 01497* 01495 01485* 01496 01497 01495 01485 01496 01497* 50065 50013 50014* 50016 50039 01495 01485* 01496 01497 01495 01485 01496 01497* 50065 50013* 50014 50016 50039 50065 50013 50014 50016* 50039 50034 01495 01485 01496 01497 01647 01644 01648 01646   Tool  Thread   3/8"-24 Male M8x1 Male 5/16"-24 Male 1/2"-20 Male 1/4"-28 Female Integrated Collets: .4 hp Rt. Angle Die Grinders Mini-Dynafile® II     95  .33 hp Die Grinder Right Angle, Gearless, Rear Exhaust   High Quality Air-Powered Die Grinders   DIE GRINDERS   Model 52196  18,000 RPM, 1/4" Collet  • Powerful high-torque air motor.  • Gearless for reduced maintenance and downtime.  • Optional safety-lock lever available.  • Thermal-insulated handle reduces cold air transmission to operator.   DIE GRINDERS   CARBIDE BURRS, ROTARY FILES, MOUNTED POINTS, WHEELS AND DISCS   Collet Inserts: Page 94  • Carbide Burrs: Page 189  • Accessories: Page 159   Optional 94994 Overhose Assembly may be used to further reduce noise levels by as much as 5 dB(A). Overhose redirects exhaust away from operator and workpiece. Air line sold separately. (See page 157.)   Model Motor Motor Sound Maximum Air Flow Hose I.D. Size Air Inlet Tool Weight Length Height Number hp (W) RPM Level SCFM (LPM) Inch (mm) Thread Thread Pound (kg) Inch (mm) Inch (mm)  52196 .33 (246) 18,000 81 dB(A) 20 (567) 1/4 (6) 1/4" NPT 3/8"-24 Male 1.9 (0.8) 4-1/2 (114) 3-7/8 (98) Tune-Up Kit: No. 96505 (page 192)  • Additional Specifications: Air Pressure 90 PSIG (6.2 Bar)   .4 hp Die Grinder Angle-Head, Planetary Geared, Rear Exhaust   High Quality Air-Powered Die Grinders   Model 53420  3,200 RPM, 1/4" Collet  • Includes 50055 Collet Assembly and extended rear exhaust muffler to reduce noise levels.  • Optional 54585 Side Handle Assembly is available.  • Lightweight thermal-insulated housing reduces cold air transmission and vibration to the operator.   CARBIDE BURRS, ROTARY FILES, MOUNTED POINTS, WHEELS AND DISCS   The use of a filter-regulator- lubricator will increase tool performance, extend tool life and lessen repair costs. (See page 162.)   Model Motor Motor Sound Maximum Air Flow Hose I.D. Size Air Inlet Tool Weight Length Height Number hp (W) RPM Level SCFM (LPM) Inch (mm) Thread Thread Pound (kg) Inch (mm) Inch (mm)  53420 .4 (298) 3,200 83 dB(A) 23 (650) 1/4 (6) 1/4" NPT 1/4"-28 Female 1.9 (0.9) 11-3/8 (289) 2-1/8 (54) Tune-Up Kit: No. 96333 (page 192)  • Additional Specifications: Air Pressure 90 PSIG (6.2 Bar)   Model 52196 Model 53420     96 .4 hp Die Grinders Straight-Line, Planetary Geared, Rear Exhaust   High Quality Air-Powered Die Grinders   DIE GRINDERS   • Planetary gear allows tool to run at proper speed under load, maximizing life of cutting accessory.  • Extended muffler design.  Model 51200 Model 51203  950 RPM, 1/4" Collet 950 RPM, 6 mm Collet  Model 51201 Model 51204  3,200 RPM, 1/4" Collet 3,200 RPM, 6 mm Collet  Model 51202 Model 51205  5,000 RPM, 1/4" Collet 5,000 RPM, 6 mm Collet   DIE GRINDERS   CARBIDE BURRS, ROTARY FILES, MOUNTED POINTS, WHEELS AND DISCS   Collet Inserts: Page 94  • Carbide Burrs: Page 189  • Accessories: Page 159   Model Number Motor Motor Sound Maximum Air Flow Hose I.D. Size Air Inlet Tool Weight Length Height 1/4" / 6 mm hp (W) RPM Level SCFM (LPM) Inch (mm) Thread Thread Pound (kg) Inch (mm) Inch (mm)  51200 / 51203 .4 (298) 950 78 dB(A) 23 (651) 1/4 (6) 1/4" NPT 3/8"-24 Male 2.1 (1.0) 10-3/8 (264) 1-5/8 (40) 51201 / 51204 .4 (298) 3,200 77 dB(A) 23 (651) 1/4 (6) 1/4" NPT 3/8"-24 Male 1.8 (0.8) 9-1/8 (232) 1-5/8 (40) 51202 / 51205 .4 (298) 5,000 80 dB(A) 23 (651) 1/4 (6) 1/4" NPT 3/8"-24 Male 1.8 (0.8) 9-1/8 (232) 1-5/8 (40) Tune-Up Kit: No. 96173 (page 192)  • Additional Specifications: Air Pressure 90 PSIG (6.2 Bar)  .4 hp Die Grinders Straight-Line, Gearless, Rear Exhaust   High Quality Air-Powered Die Grinders   • Gearless motors decrease downtime and lessen repair expense when compared to geared tools.  • Collet design reduces run-out.  • Extended muffler design.  Model 52201 Model 52231  25,000 RPM, 1/4" Collet 25,000 RPM, 6 mm Collet  Model 52203 Model 52233  30,000 RPM, 1/4" Collet 30,000 RPM, 6 mm Collet   CARBIDE BURRS, ROTARY FILES, MOUNTED POINTS, WHEELS AND DISCS   Model Number Motor Motor Sound Maximum Air Flow Hose I.D. Size Air Inlet Tool Weight Length Height 1/4" / 6 mm hp (W) RPM Level SCFM (LPM) Inch (mm) Thread Thread Pound (kg) Inch (mm) Inch (mm)  52201 / 52231 .4 (298) 25,000 73 dB(A) 22 (623) 1/4 (6) 1/4" NPT – 1.0 (0.5) 7-1/8 (181) 1-5/8 (41) 52203 / 52233 .4 (298) 30,000 76 dB(A) 23 (651) 1/4 (6) 1/4" NPT – 1.0 (0.5) 7-1/8 (181) 1-5/8 (41) Tune-Up Kit: No. 96049 (page 192)  • Additional Specifications: Air Pressure 90 PSIG (6.2 Bar)   Model 52201  Model 51200   Dynaswivel ® air line connector is ideal for use with most air tools. The Dynaswivel  ® improves tool maneuverability, minimizes operator fatigue and extends hose life. (See page 163.)     97   DIE GRINDERSDIE GRINDERS   Collet Inserts: Page 94  • Carbide Burrs: Page 189  • Accessories: Page 159   .4 hp Die Grinders Straight-Line, Gearless, Rear Exhaust   High Quality Air-Powered Die Grinders   • Gearless motors decrease downtime and lessen repair expense when compared to geared tools.  • Features standard muffler for more compact design.  Model 52325 Model 52326  25,000 RPM, 1/4" Collet 25,000 RPM, 6 mm Collet  Model 52327 Model 52328  30,000 RPM, 1/4" Collet 30,000 RPM, 6 mm Collet  Model 52345  30,000 RPM, 1/8" Collet  Model 52341  30,000 RPM, 1/8" Collet  • Model 52341 includes 94994 Overhose Asembly.   CARBIDE BURRS, ROTARY FILES, MOUNTED POINTS, WHEELS AND DISCS   Model Number Motor Motor Sound Maximum Air Flow Hose I.D. Size Air Inlet Tool Weight Length Height 1/4" / 6 mm hp (W) RPM Level SCFM (LPM) Inch (mm) Thread Thread Pound (kg) Inch (mm) Inch (mm)  52325 / 52326 .4 (298) 25,000 81 dB(A) 22 (623) 1/4 (6) 1/4" NPT – 0.8 (0.4) 5-3/4 (146) 1-5/8 (41) 52327 / 52328 .4 (298) 30,000 83 dB(A) 23 (651) 1/4 (6) 1/4" NPT – 0.8 (0.4) 5-3/4 (146) 1-5/8 (41) 52345 / – .4 (298) 30,000 83 dB(A) 23 (651) 1/4 (6) 1/4" NPT – 0.8 (0.4) 5-3/4 (146) 1-5/8 (41) 52341 / – .4 (298) 30,000 83 dB(A) 23 (651) 1/4 (6) 1/4" NPT – 0.8 (0.4) 5-3/4 (146) 1-5/8 (41) Tune-Up Kit: No. 96049 (page 192)  • Additional Specifications: Air Pressure 90 PSIG (6.2 Bar)  .4 hp Die Grinders Straight-Line, Gearless, Front Exhaust   High Quality Air-Powered Die Grinders   • Gearless motors decrease downtime and lessen repair expense when compared to geared tools.  Model 52200 Model 52230  25,000 RPM, 1/4" Collet 25,000 RPM, 6 mm Collet  Model 52202 Model 52232  30,000 RPM, 1/4" Collet 30,000 RPM, 6 mm Collet   CARBIDE BURRS, ROTARY FILES, MOUNTED POINTS, WHEELS AND DISCS   Model Number Motor Motor Sound Maximum Air Flow Hose I.D. Size Air Inlet Tool Weight Length Height 1/4" / 6 mm hp (W) RPM Level SCFM (LPM) Inch (mm) Thread Thread Pound (kg) Inch (mm) Inch (mm)  52200 / 52230 .4 (298) 25,000 75 dB(A) 20 (566) 1/4 (6) 1/4" NPT – 0.8 (0.4) 5-1/8 (130) 1-5/8 (41) 52202 / 52232 .4 (298) 30,000 88 dB(A) 20 (566) 1/4 (6) 1/4" NPT – 0.8 (0.4) 5-1/8 (130) 1-5/8 (41) Tune-Up Kit: No. 96048 (page 192)  • Additional Specifications: Air Pressure 90 PSIG (6.2 Bar)   Model 52200   Model 52325   The use of a filter-regulator- lubricator will increase tool performance, extend tool life and lessen repair costs. (See page 162.) Model 52200 Model 52200   Optional 94994 Overhose Assembly may be used to further reduce noise levels by as much as 5 dB(A). Overhose redirects exhaust away from operator and workpiece. Air line sold separately. (See page 157.)     98 .4 hp Die Grinders Right Angle and 7° Offset Models   See Our Features and Benefits: A Picture Says a Thousand Words!   DIE GRINDERS   Features and Advantages  • Kevlar® phenolic vanes for longer life.  • Lightweight ergonomic design for greater comfort and control.  • One-piece spindle keeps all rotating components on the same centerline for reduced run-out, which means lower vibration levels and increased gear life.  • Front and rear exhaust models. Air passage to continually cool the gear box – longer gear life!  Available in speeds of 3,200 RPM, 5,000 RPM, 12,000 RPM, 15,000 RPM, 20,000 RPM, 25,000 RPM and 30,000 RPM.   Benefits  • Increased performance from higher torque levels. You can really “work” these tools. Stall out torque is the highest in the marketplace.  • We use Gear Oil as opposed to grease. Gear Oil is specially formulatedto STICK TO METAL. Grease does not stick and the centrifugal force of the spinning gears throws the grease away from the metal surface.  • Longer gear life means reduced downtime and less costly repairs.  • Front and rear exhaust models – user can decide which configuration is right for them. More choice means more control of their purchase.   • Insulated housings provide “warm tools” for the users and helps prevent worker’s injuries like “white finger”.  • Lower vibration levels help prevent worker injuries such as Carpal Tunnel Syndrome. Machines are easier to use because they do not “buzz” in your hands. Workers can use smooth running machines longer.  • Low profile machines are ideal for “hard-to-reach” areas. A performance plus!  • All machines are perfectly compatible with all Dynabrade Accessories. Providing systemized solutions for our customers is a key to Dynabrade’s success.   DIE GRINDERS   Tools include Kevlar ® phenolic vanes for longer life.   Registered trademark of DuPont de Nemours, EI, & Co., Inc.    Lightweight ergonomic design for greater operator comfort and control.  Thermal-insulated composite housing prevents cold air transmission and reduces vibration to the operator’s hand.   Air passage continually cools gear box to reduce wear and heat build-up.   Needle bearing assures proper shaft alignment; has push-out plug for easy removal.  Oil fitting to maintain proper gear oil saturation.Pinion piloted on rotor to reduce runout and increase gear life.   • Pinion piloted on rotor to reduce run-out and increase gear life.  • Needle bearing assures proper shaft alignment – increases gear life.  • Dual wick lubrication system – saturated with gear oil for extended gear life – over 700 hours. This helps administer the right amount and keep the gear oil on the metal gears.  • Highest horsepower and torque levels of any similar competitive product.   Die Grinders: Page 99  • Disc Sanders: Page 111  • Gear Oil and Gun: Page 205   One piece spindle keeps all rotating components on the same centerline to reduce run-out.  Features dual wick lubrication system, saturated with gear oil for extended gear life (over 700 hours with proper use of gear oil), increased performance and reduced downtime. Includes gear oil and gun, see opposite page.     99  .4 hp Die Grinders Right Angle, Front and Rear Exhaust  Front Exhaust Models  Model 51800 Model 51803  12,000 RPM, 1/4" Collet 12,000 RPM, 6 mm Collet  Model 51801 Model 51804  15,000 RPM, 1/4" Collet 15,000 RPM, 6 mm Collet  Model 51802 Model 51805  20,000 RPM, 1/4" Collet 20,000 RPM, 6 mm Collet   DIE GRINDERSDIE GRINDERS   Collet Inserts: Page 94  • Carbide Burrs: Page 189  • Accessories: Page 159   CARBIDE BURRS, ROTARY FILES, MOUNTED POINTS, WHEELS AND DISCS   Model Number Motor Motor Sound Maximum Air Flow Hose I.D. Size Air Inlet Tool Weight Length Height 1/4" / 6 mm hp (W) RPM Level SCFM (LPM) Inch (mm) Thread Thread Pound (kg) Inch (mm) Inch (mm)  51800 / 51803 .4 (298) 12,000 85 dB(A) 21 (595) 1/4 (6) 1/4" NPT – 1.1 (.5) 5-3/4 (146) 2-7/8 (71) 51801 / 51804 .4 (298) 15,000 84 dB(A) 21 (595) 1/4 (6) 1/4" NPT – 1.1 (.5) 5-3/4 (146) 2-7/8 (71) 51802 / 51805 .4 (298) 20,000 87 dB(A) 21 (595) 1/4 (6) 1/4" NPT – 1.1 (.5) 5-3/4 (146) 2-7/8 (71) Tune-Up Kit: No. 96179 (page 192)  • Additional Specifications: Air Pressure 90 PSIG (6.2 Bar)   Model 51800   Rear Exhaust Models with Extended Muffler  Model 50000 Model 50003  12,000 RPM, 1/4" Collet 12,000 RPM, 6 mm Collet  Model 50001 Model 50004  15,000 RPM, 1/4" Collet 15,000 RPM, 6 mm Collet  Model 50002 Model 50005  20,000 RPM, 1/4" Collet 20,000 RPM, 6 mm Collet   Model Number Motor Motor Sound Maximum Air Flow Hose I.D. Size Air Inlet Tool Weight Length Height 1/4" / 6 mm hp (W) RPM Level SCFM (LPM) Inch (mm) Thread Thread Pound (kg) Inch (mm) Inch (mm)  50000 / 50003 .4 (298) 12,000 85 dB(A) 21 (595) 1/4 (6) 1/4" NPT – 1.2 (.5) 7-3/8 (187) 2-7/8 (73) 50001 / 50004 .4 (298) 15,000 83 dB(A) 21 (595) 1/4 (6) 1/4" NPT – 1.2 (.5) 7-3/8 (187) 2-7/8 (73) 50002 / 50005 .4 (298) 20,000 86 dB(A) 21 (595) 1/4 (6) 1/4" NPT – 1.2 (.5) 7-3/8 (187) 2-7/8 (73) Tune-Up Kit: No. 96179 (page 192)  • Additional Specifications: Air Pressure 90 PSIG (6.2 Bar)   Model 50000   Rear Exhaust Models with Standard Muffler  Model 53425  3,200 RPM, 1/4" Collet  Model 52315 Model 52318  12,000 RPM, 1/4" Collet 12,000 RPM, 6 mm Collet  Model 52316 Model 52319  15,000 RPM, 1/4" Collet 15,000 RPM, 6 mm Collet  Model 52317 Model 52320  20,000 RPM, 1/4" Collet 20,000 RPM, 6 mm Collet   Model Number Motor Motor Sound Maximum Air Flow Hose I.D. Size Air Inlet Tool Weight Length Height 1/4" / 6 mm hp (W) RPM Level SCFM (LPM) Inch (mm) Thread Thread Pound (kg) Inch (mm) Inch (mm)  53425 / – .4 (298) 3,200 84 dB(A) 21 (595) 1/4 (6) 1/4" NPT – 1.9 (.9) 7 (178) 2-1/8 (54) 52315 / 52318 .4 (298) 12,000 86 dB(A) 21 (595) 1/4 (6) 1/4" NPT – 1.1 (.5) 5-3/4 (146) 2-7/8 (71) 52316 / 52319 .4 (298) 15,000 86 dB(A) 21 (595) 1/4 (6) 1/4" NPT – 1.1 (.5) 5-3/4 (146) 2-7/8 (71) 52317 / 52320 .4 (298) 20,000 87 dB(A) 21 (595) 1/4 (6) 1/4" NPT – 1.1 (.5) 5-3/4 (146) 2-7/8 (71) Tune-Up Kit: No. 96179 (page 192)  • Additional Specifications: Air Pressure 90 PSIG (6.2 Bar)   Model 52315   High Quality Air-Powered Die Grinders     100   DIE GRINDERSDIE GRINDERS   Collet Inserts: Page 94  • Carbide Burrs: Page 189  • Accessories: Page 159   .4 hp Die Grinders 7° Offset, Front and Rear Exhaust 7° Offset, Planetary Geared, Rear Exhaust   Front Exhaust Models  Model 52204 Model 52250  25,000 RPM, 1/4" Collet 25,000 RPM, 6 mm Collet  Model 52206 Model 52252  30,000 RPM, 1/4" Collet 30,000 RPM, 6 mm Collet   CARBIDE BURRS, ROTARY FILES, MOUNTED POINTS, WHEELS AND DISCS   Model Number Motor Motor Sound Maximum Air Flow Hose I.D. Size Air Inlet Tool Weight Length Height 1/4" / 6 mm hp (W) RPM Level SCFM (LPM) Inch (mm) Thread Thread Pound (kg) Inch (mm) Inch (mm)  52204 / 52250 .4 (298) 25,000 74 dB(A) 18 (510) 1/4 (6) 1/4" NPT – 1.0 (.5) 6 (152) 3-3/4 (94) 52206 / 52252 .4 (298) 30,000 78 dB(A) 21 (595) 1/4 (6) 1/4" NPT – 1.0 (.5) 6 (152) 3-3/4 (94) Tune-Up Kit: No. 96048 (page 192)  • Additional Specifications: Air Pressure 90 PSIG (6.2 Bar)   Model Number Motor Motor Sound Maximum Air Flow Hose I.D. Size Air Inlet Tool Weight Length Height 1/4" / 6 mm hp (W) RPM Level SCFM (LPM) Inch (mm) Thread Thread Pound (kg) Inch (mm) Inch (mm)  52205 / 52251 .4 (298) 25,000 80 dB(A)  19 (538) 1/4 (6) 1/4" NPT – 1.3 (.6) 8-1/2 (216) 3-3/4 (94) 52207 / NA .4 (298) 30,000 76 dB(A)  22 (623) 1/4 (6) 1/4" NPT – 1.3 (.6) 8-1/2 (216) 3-3/4 (94) Tune-Up Kit: No. 96049 (page 192)  • Additional Specifications: Air Pressure 90 PSIG (6.2 Bar)   Rear Exhaust Models with Extended Muffler  Model 52205 Model 52251  25,000 RPM, 1/4" Collet 25,000 RPM, 6 mm Collet  Model 52207  30,000 RPM, 1/4" Collet   Model 52205   Model Number Motor Motor Sound Maximum Air Flow Hose I.D. Size Air Inlet Tool Weight Length Height 1/4" / 6 mm hp (W) RPM Level SCFM (LPM) Inch (mm) Thread Thread Pound (kg) Inch (mm) Inch (mm)  52335 / 52331 .4 (298) 25,000 85 dB(A) 18 (510) 1/4 (6) 1/4" NPT – 1.0 (.5) 6 (152) 3-3/4 (94) 52337 / 52333 .4 (298) 30,000 84 dB(A) 21 (595) 1/4 (6) 1/4" NPT – 1.0 (.5) 6 (152) 3-3/4 (94) Tune-Up Kit: No. 96049 (page 192)  • Additional Specifications: Air Pressure 90 PSIG (6.2 Bar)   Rear Exhaust Models with Standard Muffler  Model 52335 Model 52331  25,000 RPM, 1/4" Collet 25,000 RPM, 6 mm Collet  Model 52337 Model 52333  30,000 RPM, 1/4" Collet 30,000 RPM, 6 mm Collet   Model Number Motor Motor Sound Maximum Air Flow Hose I.D. Size Air Inlet Tool Weight Length Height 1/4" / 6 mm hp (W) RPM Level SCFM (LPM) Inch (mm) Thread Thread Pound (kg) Inch (mm) Inch (mm)  51211 / 51214 .4 (298) 3,200 80 dB(A) 24 (680) 1/4 (6) 1/4" NPT 3/8"-24 Male 2.1 (.9) 8 (203) 5-1/2 (141) 51212 / 51215 .4 (298) 5,000 78 dB(A) 24 (680) 1/4 (6) 1/4" NPT 3/8"-24 Male 2.1 (.9) 8 (203) 5-1/2 (141) Tune-Up Kit: No. 96174 (page 192)  • Additional Specifications: Air Pressure 90 PSIG (6.2 Bar)   Model 51211 Model 51214  3,200 RPM, 1/4" Collet 3,200 RPM, 6 mm Collet  Model 51212 Model 51215  5,000 RPM, 1/4" Collet 5,000 RPM, 6 mm Collet   Model 52335 Model 51211  All models include Extended Muffler.   High Quality Air-Powered Die Grinders   Model 52204     101   DIE GRINDERSDIE GRINDERS   Collet Inserts: Page 94  • Carbide Burrs: Page 189  • Accessories: Page 159   CARBIDE BURRS, ROTARY FILES, MOUNTED POINTS, WHEELS AND DISCS   Model Number Motor Motor Sound Maximum Air Flow Hose I.D. Size Air Inlet Tool Weight Length Height 1/4" / 6 mm hp (W) RPM Level SCFM (LPM) Inch (mm) Thread Thread Pound (kg) Inch (mm) Inch (mm)  51300 / 51310 .5 (373) 15,000 80 dB(A) 24 (680) 3/8 (10) 1/4" NPT 3/8"-24 Male 1.5 (0.7) 7 (178) 1-7/8 (48) 51301 / 51311 .5 (373) 18,000 81 dB(A) 24 (680) 3/8 (10) 1/4" NPT 3/8"-24 Male 1.5 (0.7) 7 (178) 1-7/8 (48) 51302 / 51312 .5 (373) 20,000 82 dB(A) 25 (708) 3/8 (10) 1/4" NPT 3/8"-24 Male 1.5 (0.7) 7 (178) 1-7/8 (48) 51303 / 51313 .5 (373) 24,000 84 dB(A) 26 (736) 3/8 (10) 1/4" NPT 3/8"-24 Male 1.5 (0.7) 7 (178) 1-7/8 (48) Tune-Up Kit: No. 95600 (page 192)  • Additional Specifications: Air Pressure 90 PSIG (6.2 Bar)   Model 51301   .5 hp Die Grinders Straight-Line, Gearless, Front Exhaust   High Quality Air-Powered Die Grinders   • Gearless for reduced maintenance and downtime.  Model 51300 Model 51310  15,000 RPM, 1/4" Collet 15,000 RPM, 6 mm Collet  Model 51301 Model 51311  18,000 RPM, 1/4" Collet 18,000 RPM, 6 mm Collet  Model 51302 Model 51312  20,000 RPM, 1/4" Collet 20,000 RPM, 6 mm Collet  Model 51303 Model 51313  24,000 RPM, 1/4" Collet 24,000 RPM, 6 mm Collet   CARBIDE BURRS, ROTARY FILES, MOUNTED POINTS, WHEELS AND DISCS   Model Number Motor Motor Sound Maximum Air Flow Hose I.D. Size Air Inlet Tool Weight Length Height 1/4" / 6 mm hp (W) RPM Level SCFM (LPM) Inch (mm) Thread Thread Pound (kg) Inch (mm) Inch (mm)  51304 / 51314 .5 (373) 15,000 79 dB(A) 25 (708) 3/8 (10) 1/4" NPT 3/8"-24 Male 1.8 (0.8) 9-1/4 (235) 1-7/8 (48) 51305 / 51315 .5 (373) 18,000 79 dB(A) 26 (736) 3/8 (10) 1/4" NPT 3/8"-24 Male 1.8 (0.8) 9-1/4 (235) 1-7/8 (48) 51306 / 51316 .5 (373) 20,000 80 dB(A) 27 (765) 3/8 (10) 1/4" NPT 3/8"-24 Male 1.8 (0.8) 9-1/4 (235) 1-7/8 (48) 51307 / 51317 .5 (373) 24,000 79 dB(A) 27 (765) 3/8 (10) 1/4" NPT 3/8"-24 Male 1.8 (0.8) 9-1/4 (235) 1-7/8 (48) Tune-Up Kit: No. 96530 (page 192)  • Additional Specifications: Air Pressure 90 PSIG (6.2 Bar)   Model 51304   .5 hp Die Grinders Straight-Line, Gearless, Rear Exhaust   High Quality Air-Powered Die Grinders   • Gearless for reduced maintenance and downtime.  • Extended rear exhaust muffler design.  Model 51304 Model 51314  15,000 RPM, 1/4" Collet 15,000 RPM, 6 mm Collet  Model 51305 Model 51315  18,000 RPM, 1/4" Collet 18,000 RPM, 6 mm Collet  Model 51306 Model 51316  20,000 RPM, 1/4" Collet 20,000 RPM, 6 mm Collet  Model 51307 Model 51317  24,000 RPM, 1/4" Collet 24,000 RPM, 6 mm Collet     102   DIE GRINDERSDIE GRINDERS   Collet Inserts: Page 94  • Carbide Burrs: Page 189  • Accessories: Page 159   CARBIDE BURRS, ROTARY FILES, MOUNTED POINTS, WHEELS AND DISCS   Model 53510   .5 hp Die Grinders Straight-Line, 3" Extension, Rear Exhaust   High Quality Air-Powered Die Grinders   • Extension Die Grinder has 3" workable reach.  • Extended rear exhaust muffler design.  Model 53510 Model 53512  18,000 RPM, 1/4" Collet 18,000 RPM, 6 mm Collet  Model 53511 Model 53513  20,000 RPM, 1/4" Collet 20,000 RPM, 6 mm Collet   CARBIDE BURRS, ROTARY FILES, MOUNTED POINTS, WHEELS AND DISCS   Model 53501   .5 hp Die Grinders Straight-Line, 7-1/4" Extension, Rear Exhaust   High Quality Air-Powered Die Grinders   • Extension Die Grinder has 7-1/4" workable reach.  • Extended rear exhaust muffler design.  Model 53501 Model 53506  18,000 RPM, 1/4" Collet 18,000 RPM, 6 mm Collet  Model 53502 Model 53507  20,000 RPM, 1/4" Collet 20,000 RPM, 6 mm Collet   Model Number Motor Motor Sound Maximum Air Flow Hose I.D. Size Air Inlet Tool Weight Length Height 1/4" / 6 mm hp (W) RPM Level SCFM (LPM) Inch (mm) Thread Thread Pound (kg) Inch (mm) Inch (mm)  53510 / 53512 .5 (373) 18,000 75 dB(A) 30 (850)  3/8 (10) 1/4" NPT – 2.5 (1.1) 12-7/8 (327) 1-7/8 (48) 53511 / 53513 .5 (373) 20,000 77 dB(A) 31 (878) 3/8 (10) 1/4" NPT – 2.5 (1.1) 12-7/8 (327) 1-7/8 (48) Tune-Up Kit: No. 96007 (page 192)  • Additional Specifications: Air Pressure 90 PSIG (6.2 Bar)   Model Number Motor Motor Sound Maximum Air Flow Hose I.D. Size Air Inlet Tool Weight Length Height 1/4" / 6 mm hp (W) RPM Level SCFM (LPM) Inch (mm) Thread Thread Pound (kg) Inch (mm) Inch (mm)  53501 / 53506 .5 (373) 18,000 75 dB(A) 30 (850) 3/8 (10) 1/4" NPT – 3.2 (1.5) 17-7/8 (454) 1-7/8 (48) 53502 / 53507 .5 (373) 20,000 77 dB(A) 31 (878) 3/8 (10) 1/4" NPT – 3.2 (1.5) 17-7/8 (454) 1-7/8 (48) Tune-Up Kit: No. 96007 (page 192)  • Additional Specifications: Air Pressure 90 PSIG (6.2 Bar)   Dynaswivel ® air line connector is ideal for use with most air tools. The Dynaswivel  ® improves tool maneuverability, minimizes operator fatigue and extends hose life. (See page 163.)   3"   7-1/4"   Motor Tune-Up Kits will extend the life of an air tool when used with a preventative maintenance schedule.     103   DIE GRINDERSDIE GRINDERS   Collet Inserts: Page 94  • Carbide Burrs: Page 189  • Accessories: Page 159   CARBIDE BURRS, ROTARY FILES, MOUNTED POINTS, WHEELS AND DISCS   Model Number Motor Motor Sound Maximum Air Flow Hose I.D. Size Air Inlet Tool Weight Length Height 1/4" / 6 mm hp (W) RPM Level SCFM (LPM) Inch (mm) Thread Thread Pound (kg) Inch (mm) Inch (mm)  52211 / 52261 .5 (373) 18,000 77 dB(A) 28 (793) 3/8 (10) 1/4" NPT – 1.7 (0.8) 6 (152) 4-1/2 (114) 52212 / 52262 .5 (373) 20,000 77 dB(A) 28 (793) 3/8 (10) 1/4" NPT – 1.7 (0.8) 6 (152) 4-1/2 (114) 52213 / 52263 .5 (373) 24,000 82 dB(A) 28 (793) 3/8 (10) 1/4" NPT – 1.7 (0.8) 6 (152) 4-1/2 (114) Tune-Up Kit: No. 96044 (page 192)  • Additional Specifications: Air Pressure 90 PSIG (6.2 Bar)   Model 52211   .5 hp Die Grinders 7° Offset, Short Shank, Gearless, Front Exhaust   High Quality Air-Powered Die Grinders   • Gearless for reduced maintenance and downtime.  Model 52211 Model 52261  18,000 RPM, 1/4" Collet 18,000 RPM, 6 mm Collet  Model 52212 Model 52262  20,000 RPM, 1/4" Collet 20,000 RPM, 6 mm Collet  Model 52213 Model 52263  24,000 RPM, 1/4" Collet 24,000 RPM, 6 mm Collet   CARBIDE BURRS, ROTARY FILES, MOUNTED POINTS, WHEELS AND DISCS   Model Motor Motor Sound Maximum Air Flow Hose I.D. Size Air Inlet Tool Weight Length Height Number hp (W) RPM Level SCFM (LPM) Inch (mm) Thread Thread Pound (kg) Inch (mm) Inch (mm)  52221 .5 (373) 18,000 77 dB(A) 23 (651) 3/8 (10) 1/4" NPT – 2.0 (0.9) 8-1/8 (206) 4-1/2 (114) 52222 .5 (373) 20,000 79 dB(A) 25 (708) 3/8 (10) 1/4" NPT – 2.0 (0.9) 8-1/8 (206) 4-1/2 (114) 52223 .5 (373) 24,000 78 dB(A) 27 (765) 3/8 (10) 1/4" NPT – 2.0 (0.9) 8-1/8 (206) 4-1/2 (114) Tune-Up Kit: No. 96044 (page 192)  • Additional Specifications: Air Pressure 90 PSIG (6.2 Bar)   Model 52221   .5 hp Die Grinders 7° Offset, Short Shank, Gearless, Rear Exhaust   High Quality Air-Powered Die Grinders   • Gearless for reduced maintenance and downtime.  • Extended rear exhaust muffler design.  Model 52221 Model 52223  18,000 RPM, 1/4" Collet 24,000 RPM, 1/4" Collet  Model 52222  20,000 RPM, 1/4" Collet   Dynaswivel ® air line connector is ideal for use with most air tools. The Dynaswivel  ® improves tool maneuverability, minimizes operator fatigue and extends hose life. (See page 163.)     104   DIE GRINDERSDIE GRINDERS   Collet Inserts: Page 94  • Carbide Burrs: Page 189  • Accessories: Page 159   CARBIDE BURRS, ROTARY FILES, MOUNTED POINTS, WHEELS AND DISCS   Model Motor Motor Sound Maximum Air Flow Hose I.D. Size Air Inlet Tool Weight Length Height Number hp (W) RPM Level SCFM (LPM) Inch (mm) Thread Thread Pound (kg) Inch (mm) Inch (mm)  52216 .5 (373) 15,000 78 dB(A) 26 (736) 3/8 (10) 1/4" NPT 3/8"-24 Male 2.0 (0.9) 6 (152) 5-1/2 (140) 52218 .5 (373) 20,000 77 dB(A) 28 (793) 3/8 (10) 1/4" NPT 3/8"-24 Male 2.0 (0.9) 6 (152) 5-1/2 (140) Tune-Up Kit: No. 96044 (page 192)  • Additional Specifications: Air Pressure 90 PSIG (6.2 Bar)   Model 52216   .5 hp Die Grinders 7° Offset, Long Shank, Gearless, Front Exhaust   High Quality Air-Powered Die Grinders   Front Exhaust Models  • Gearless for reduced maintenance and downtime.  Model 52216 Model 52218  15,000 RPM, 1/4" Collet 20,000 RPM, 1/4" Collet   Model Motor Motor Sound Maximum Air Flow Hose I.D. Size Air Inlet Tool Weight Length Height Number hp (W) RPM Level SCFM (LPM) Inch (mm) Thread Thread Pound (kg) Inch (mm) Inch (mm)  52267 .5 (373) 15,000 76 dB(A) 21 (595) 3/8 (10) 1/4" NPT 3/8"-24 Male 2.0 (0.9) 8-1/8 (207) 5-1/2 (140) Tune-Up Kit: No. 96044 (page 192)  • Additional Specifications: Air Pressure 90 PSIG (6.2 Bar)   Model 52267   Rear Exhaust Model  Model 52267  15,000 RPM, 1/4" Collet  • Gearless for reduced maintenance and downtime.  • Extended rear exhaust muffler design.   .55 hp Die Grinder Right Angle, Gearless, Rear Exhaust   High Quality Air-Powered Die Grinders   Model 52280  15,000 RPM, 1/4" Collet  • Powerful high-torque air motor.  • Gearless for reduced maintenance and downtime.  • Optional safety-lock lever available.  • Extended rear exhaust muffler design.   CARBIDE BURRS, ROTARY FILES, MOUNTED POINTS, WHEELS AND DISCS   Model Motor Motor Sound Maximum Air Flow Hose I.D. Size Air Inlet Tool Weight Length Height Number hp (W) RPM Level SCFM (LPM) Inch (mm) Thread Thread Pound (kg) Inch (mm) Inch (mm)  52280 .55 (410) 15,000 83 dB(A) 33 (934) 1/4 (6) 1/4" NPT 3/8"-24 Male 2.3 (1.0) 8-1/8 (207) 5-1/2 (140) Tune-Up Kit: No. 96522 (page 192)  • Additional Specifications: Air Pressure 90 PSIG (6.2 Bar)   Model 52280   The use of a filter-regulator- lubricator will increase tool performance, extend tool life and lessen repair costs. (See page 162.)     105   DIE GRINDERSDIE GRINDERS   Collet Inserts: Page 94  • Carbide Burrs: Page 189  • Accessories: Page 159   CARBIDE BURRS, ROTARY FILES, MOUNTED POINTS, WHEELS AND DISCS   Model Number Motor Motor Sound Maximum Air Flow Hose I.D. Size Air Inlet Tool Weight Length Height 1/4" / 6 mm hp (W) RPM Level SCFM (LPM) Inch (mm) Thread Thread Pound (kg) Inch (mm) Inch (mm)  52256 / 52264 .7 (522) 15,000 83 dB(A) 31 (878) 3/8 (10) 1/4" NPT – 1.7 (0.8) 6 (152) 1-7/8 (48) 52257 / 52265 .7 (522) 18,000 87 dB(A) 33 (935) 3/8 (10) 1/4" NPT – 1.7 (0.8) 6 (152) 1-7/8 (48) 52258 / – .7 (522) 20,000 91 dB(A) 34 (963) 3/8 (10) 1/4" NPT – 1.7 (0.8) 6 (152) 1-7/8 (48) Tune-Up Kit: No. 96529 (page 192)  • Additional Specifications: Air Pressure 90 PSIG (6.2 Bar)   Model 52256  .7 hp Die Grinders Straight-Line, Front Exhaust   High Quality Air-Powered Die Grinders   Model 52256 Model 52264  15,000 RPM, 1/4" Collet 15,000 RPM, 6 mm Collet  Model 52257 Model 52265  18,000 RPM, 1/4" Collet 18,000 RPM, 6 mm Collet  Model 52258  20,000 RPM, 1/4" Collet   CARBIDE BURRS, ROTARY FILES, MOUNTED POINTS, WHEELS AND DISCS   Model 52276   .7 hp Die Grinders Straight-Line, Rear Exhaust   High Quality Air-Powered Die Grinders   • Extended rear exhaust muffler design.  Model 52100 Model 52103  950 RPM, 1/4" Collet 950 RPM, 6 mm Collet  Model 52101 Model 52104  3,400 RPM, 1/4" Collet 3,400 RPM, 6 mm Collet  Model 52102 Model 52105  4,500 RPM, 1/4" Collet 4,500 RPM, 6 mm Collet  Model 52276 Model 52281  15,000 RPM, 1/4" Collet 15,000 RPM, 6 mm Collet  Model 52277 Model 52282  18,000 RPM, 1/4" Collet 18,000 RPM, 6 mm Collet  Model 52278 Model 52283  20,000 RPM, 1/4" Collet 20,000 RPM, 6 mm Collet   Motor Tune-Up Kits will extend the life of an air tool when used with a preventative maintenance schedule.   Model Number Motor Motor Sound Maximum Air Flow Hose I.D. Size Air Inlet Tool Weight Length Height 1/4" / 6 mm hp (W) RPM Level SCFM (LPM) Inch (mm) Thread Thread Pound (kg) Inch (mm) Inch (mm)  52100 / 52103 .7 (522) 950 84 dB(A) 34 (957) 3/8 (10) 1/4" NPT 1/2"-20 Male 3.6 (1.6) 12-1/2 (318) 1-7/8 (48) 52101 / 52104 .7 (522) 3,400 82 dB(A) 35 (977) 3/8 (10) 1/4" NPT 1/2"-20 Male 2.7 (1.2) 9-1/2 (241) 1-7/8 (48) 52102 / 52105 .7 (522) 4,500 82 dB(A) 35 (977) 3/8 (10) 1/4" NPT 1/2"-20 Male 2.7 (1.2) 9-1/2 (241) 1-7/8 (48) 52276 / 52281 .7 (522) 15,000 80 dB(A) 32 (906) 3/8 (10) 1/4" NPT – 2.3 (0.7) 8-1/8 (206) 1-7/8 (48) 52277 / 52282 .7 (522) 18,000 81 dB(A) 34 (963) 3/8 (10) 1/4" NPT – 2.3 (0.7) 8-1/8 (206) 1-7/8 (48) 52278 / 52283 .7 (522) 20,000 81 dB(A) 37 (1,048) 3/8 (10) 1/4" NPT – 2.3 (0.7) 8-1/8 (206) 1-7/8 (48) Tune-Up Kit: No. 96529 (page 192)  • Additional Specifications: Air Pressure 90 PSIG (6.2 Bar)     106   DIE GRINDERSDIE GRINDERS   Collet Inserts: Page 94  • Carbide Burrs: Page 189  • Accessories: Page 159   CARBIDE BURRS, ROTARY FILES, MOUNTED POINTS, WHEELS AND DISCS   Model Number Motor Motor Sound Maximum Air Flow Hose I.D. Size Air Inlet Tool Weight Length Height 1/4" / 6 mm hp (W) RPM Level SCFM (LPM) Inch (mm) Thread Thread Pound (kg) Inch (mm) Inch (mm)  52289 / 52225 .7 (522) 18,000 87 dB(A) 35 (991) 3/8 (10) 1/4" NPT 3/8"-24 Male 1.7 (0.8) 6 (152) 5-1/8 (130) 52290 / 52226 .7 (522) 20,000 84 dB(A) 36 (1,020) 3/8 (10) 1/4" NPT 3/8"-24 Male 1.7 (0.8) 6 (152) 5-1/8 (130) Tune-Up Kit: No. 96045 (page 192)  • Additional Specifications: Air Pressure 90 PSIG (6.2 Bar)   Model 52289   .7 hp Die Grinders 7° Offset, Gearless   High Quality Air-Powered Die Grinders   Short Shank, Front Exhaust Models  • Gearless for reduced maintenance and downtime.  Model 52289 Model 52225  18,000 RPM, 1/4" Collet 18,000 RPM, 6 mm Collet  Model 52290 Model 52226  20,000 RPM, 1/4" Collet 20,000 RPM, 6 mm Collet   Short Shank, Rear Exhaust Models  • Gearless for reduced maintenance and downtime.  • Extended rear exhaust muffler design.  Model 52293 Model 52295  18,000 RPM, 1/4" Collet 18,000 RPM, 6 mm Collet  Model 52294 Model 52298  20,000 RPM, 1/4" Collet 20,000 RPM, 6 mm Collet  Model 52297  20,000 RPM, 1/4" Collet, with Side Handle   Model Number Motor Motor Sound Maximum Air Flow Hose I.D. Size Air Inlet Tool Weight Length Height 1/4" / 6 mm hp (W) RPM Level SCFM (LPM) Inch (mm) Thread Thread Pound (kg) Inch (mm) Inch (mm)  52293 / 52295 .7 (522) 18,000 80 dB(A) 34 (963) 3/8 (10) 1/4" NPT – 2.3 (1.0) 8-1/8 (206) 5-1/8 (130) 52294 / 52298 .7 (522) 20,000 77 dB(A) 37 (1,048) 3/8 (10) 1/4" NPT – 2.3 (1.0) 8-1/8 (206) 5-1/8 (130) 52297 / – .7 (522) 20,000 77 dB(A) 37 (1,048) 3/8 (10) 1/4" NPT – 2.3 (1.0) 8-1/8 (206) 5-1/8 (130) Tune-Up Kit: No. 96045 (page 192)  • Additional Specifications: Air Pressure 90 PSIG (6.2 Bar)   Model 52242   Model Number Motor Motor Sound Maximum Air Flow Hose I.D. Size Air Inlet Tool Weight Length Height 1/4" / 6 mm hp (W) RPM Level SCFM (LPM) Inch (mm) Thread Thread Pound (kg) Inch (mm) Inch (mm)  52242 / 52286 .7 (522) 20,000 84 dB(A) 28 (793) 3/8 (10) 1/4" NPT 3/8"-24 Male 1.7 (0.8) 6 (152) 5-1/2 (140) Tune-Up Kit: No. 96045 (page 192)  • Additional Specifications: Air Pressure 90 PSIG (6.2 Bar)   Long Shank, Rear Exhaust Models  • Gearless for reduced maintenance and downtime.  Model 52242 Model 52286  20,000 RPM, 1/4" Collet 20,000 RPM, 6 mm Collet   Dynaswivel ® air line connector is ideal for use with most air tools. The Dynaswivel  ® improves tool maneuverability, minimizes operator fatigue and extends hose life. (See page 163.)   Model 52293     107   DIE GRINDERSDIE GRINDERS   Collet Inserts: Page 94  • Carbide Burrs: Page 189  • Accessories: Page 159   CARBIDE BURRS, ROTARY FILES, MOUNTED POINTS, WHEELS AND DISCS   Model Number Motor Motor Sound Maximum Air Flow Hose I.D. Size Air Inlet Tool Weight Length Height 1/4" / 6 mm hp (W) RPM Level SCFM (LPM) Inch (mm) Thread Thread Pound (kg) Inch (mm) Inch (mm)  52660 / 52680 1 (744) 950 80 dB(A) 43 (1,218) 3/8 (10) 3/8" NPT – 3.6 (1.6) 13-3/4 (384) 1-7/8 (48) 52662 / 52682 1 (744) 3,400 80 dB(A) 43 (1,218) 3/8 (10) 3/8" NPT – 3.1 (1.4) 12-1/2 (317) 1-7/8 (48) 52663 / 52683 1 (744) 4,500 80 dB(A) 41 (1,161) 3/8 (10) 3/8" NPT – 3.1 (1.4) 12-1/2 (317) 1-7/8 (48) Tune-Up Kit: No. 96532 (page 192)  • Additional Specifications: Air Pressure 90 PSIG (6.2 Bar)   Model Number Motor Motor Sound Maximum Air Flow Hose I.D. Size Air Inlet Tool Weight Length Height 1/4" / 6 mm hp (W) RPM Level SCFM (LPM) Inch (mm) Thread Thread Pound (kg) Inch (mm) Inch (mm)  52665 / 52685 1 (744) 9,000 82 dB(A) 36 (1,020) 3/8 (10) 3/8" NPT – 2.1 (1.0) 8-3/4 (221) 1-7/8 (48) 52666 / 52686 1 (744) 12,000 83 dB(A) 38 (1,076) 3/8 (10) 3/8" NPT – 2.1 (1.0) 8-3/4 (221) 1-7/8 (48) 52667 / 52687 1 (744) 15,000 80 dB(A) 39 (1,104) 3/8 (10) 3/8" NPT – 2.1 (1.0) 10 (254) 1-7/8 (48) 52668 / 52688 1 (744) 18,000 81 dB(A) 40 (1,133) 3/8 (10) 3/8" NPT – 2.1 (1.0) 10 (254) 1-7/8 (48) 52669 / 52689 1 (744) 20,000 80 dB(A) 44 (1,256) 3/8 (10) 3/8" NPT – 2.1 (1.0) 10 (254) 1-7/8 (48) Tune-Up Kit: No. 96532 (page 192)  • Additional Specifications: Air Pressure 90 PSIG (6.2 Bar)   1 hp Die Grinders Straight-Line, Rear Exhaust   High Quality Air-Powered Die Grinders   Planetary Geared Models  • Governor-controlled to maintain RPM under heavy load.  • Safety-lock lever is standard on all models.  • Lightweight thermal-insulated housing reduces cold air transmission and vibration to operator.  • Unique anti-clog exhaust baffling.  Model 52660 Model 52680  950 RPM, 1/4" Collet 950 RPM, 6 mm Collet  Model 52662 Model 52682  3,400 RPM, 1/4" Collet 3,400 RPM, 6 mm Collet  Model 52663 Model 52683  4,500 RPM, 1/4" Collet 4,500 RPM, 6 mm Collet Gearless Models • Gearless for reduced maintenance and downtime.  • Governor-controlled to maintain RPM under heavy load.  • Safety-lock lever is standard on all models.  • Lightweight thermal-insulated housing reduces cold air transmission and vibration to operator.  • Unique anti-clog exhaust baffling.  Model 52665 Model 52685  9,000 RPM, 1/4" Collet 9,000 RPM, 6 mm Collet  Model 52666 Model 52686  12,000 RPM, 1/4" Collet 12,000 RPM, 6 mm Collet  Model 52667 Model 52687  15,000 RPM, 1/4" Collet 15,000 RPM, 6 mm Collet  Model 52668 Model 52688  18,000 RPM, 1/4" Collet 18,000 RPM, 6 mm Collet  Model 52669 Model 52689  20,000 RPM, 1/4" Collet 20,000 RPM, 6 mm Collet   Model 52669   Model 52660   Optional 53621 Overhose Assembly may be used to further reduce noise levels by as much as 5 dB(A). Overhose redirects exhaust away from operator and workpiece. Air line sold separately. (See page 157.)   Use a carbide burr to easily blend weld seams.   Model 52669     108   DIE GRINDERSDIE GRINDERS   Collet Inserts: Page 94  • Carbide Burrs: Page 189  • Accessories: Page 159   CARBIDE BURRS, ROTARY FILES, MOUNTED POINTS, WHEELS AND DISCS 1 hp Die Grinders Straight-Line, 6" Extension, Rear Exhaust   High Quality Air-Powered Die Grinders   Planetary Geared Models  • Governor-controlled to maintain RPM under heavy load.  • Safety-lock lever is standard on all models.  • Unique anti-clog exhaust baffling.  Model 52672 Model 52692  3,400 RPM, 1/4" Collet 3,400 RPM, 6 mm Collet  Model 52673 Model 52693  4,500 RPM, 1/4" Collet 4,500 RPM, 6 mm Collet Gearless Models • Gearless for reduced maintenance and downtime.  • Governor-controlled to maintain RPM under heavy load.  • Safety-lock lever is standard on all models.  • Unique anti-clog exhaust baffling.  Model 52675 Model 52695  9,000 RPM, 1/4" Collet 9,000 RPM, 6 mm Collet  Model 52676 Model 52696  12,000 RPM, 1/4" Collet 12,000 RPM, 6 mm Collet  Model 52677 Model 52697  15,000 RPM, 1/4" Collet 15,000 RPM, 6 mm Collet  Model 52678 Model 52698  18,000 RPM, 1/4" Collet 18,000 RPM, 6 mm Collet  Model 52679 Model 52699  20,000 RPM, 1/4" Collet 20,000 RPM, 6 mm Collet   Model Number Motor Motor Sound Maximum Air Flow Hose I.D. Size Air Inlet Weight Length Height 1/4" / 6 mm hp (W) RPM Level SCFM (LPM) Inch (mm) Thread Pound (kg) Inch (mm) Inch (mm)  52675 / 52695 1 (744) 9,000 82 dB(A) 36 (1,020) 3/8 (10) 3/8" NPT 3.2 (1.5) 14-1/4 (359) 1-7/8 (48) 52676 / 52696 1 (744) 12,000 83 dB(A) 38 (1,076) 3/8 (10) 3/8" NPT 3.2 (1.5) 14-1/4 (359) 1-7/8 (48) 52677 / 52697 1 (744) 15,000 80 dB(A) 39 (1,104) 3/8 (10) 3/8" NPT 3.3 (1.5) 15-3/8 (390) 1-7/8 (48) 52678 / 52698 1 (744) 18,000 81 dB(A) 40 (1,133) 3/8 (10) 3/8" NPT 3.3 (1.5) 15-3/8 (390) 1-7/8 (48) 52679 / 52699 1 (744) 20,000 80 dB(A) 44 (1,256) 3/8 (10) 3/8" NPT 3.3 (1.5) 15-3/8 (390) 1-7/8 (48) Tune-Up Kit: No. 96532 (page 192)  • Additional Specifications: Air Pressure 90 PSIG (6.2 Bar)   Model Number Motor Motor Sound Maximum Air Flow Hose I.D. Size Air Inlet Weight Length Height 1/4" / 6 mm hp (W) RPM Level SCFM (LPM) Inch (mm) Thread Pound (kg) Inch (mm) Inch (mm)  52672 / 52692 1 (744) 3,400 80 dB(A) 44 (1,256) 3/8 (10) 3/8" NPT 4.1 (1.9) 16-5/8 (423) 1-7/8 (48) 52673 / 52693 1 (744) 4,500 80 dB(A) 44 (1,256) 3/8 (10) 3/8" NPT 4.1 (1.9) 16-5/8 (423) 1-7/8 (48) Tune-Up Kit: No. 96532 (page 192)  • Additional Specifications: Air Pressure 90 PSIG (6.2 Bar)   Model 52678   6"   Motor Tune-Up Kits will extend the life of an air tool when used with a preventative maintenance schedule. (See page 192.)   Model 52672   The use of a filter-regulator- lubricator will increase tool performance, extend tool life and lessen repair costs. (See page 162.)   Model 52678     109   DIE GRINDERSDIE GRINDERS   Collet Inserts: Page 94  • Carbide Burrs: See page 189  • Accessories: See page 159      CARBIDE BURRS, MOUNTED POINTS, BUFFING PADS, CONE/PLUG WHEELS   Model Motor Motor Sound Maximum Air Flow Hose I.D. Size Air Inlet Tool Weight Length Height Number hp (W) RPM Level SCFM (LPM) Inch (mm) Thread Thread Pound (kg) Inch (mm) Inch (mm)  53521 1 (744) 3,400 80 dB(A) 6 (43) 3/8 (10) 3/8" NPT 1/2"-20 5.5 (2.5) 19-3/4 (502) 1-7/8 (48) 53522 1 (744) 3,400 80 dB(A) 6 (43) 3/8 (10) 3/8" NPT 1/2"-20 7.6 (3.5) 28-1/8 (714) 1-7/8 (48) 53523 1 (744) 3,400 80 dB(A) 6 (43) 3/8 (10) 3/8" NPT 1/2"-20 9.75 (4.4) 36-1/2 (927) 1-7/8 (48) 53531 1 (744) 18,000 84 dB(A) 6 (40) 3/8 (10) 3/8" NPT 3/8"-24 4.8 (2.2) 18-3/8 (467) 1-7/8 (48) 53532 1 (744) 18,000 84 dB(A) 6 (40) 3/8 (10) 3/8" NPT 3/8"-24 6.9 (3.1) 26-3/4 (679) 1-7/8 (48) 53533 1 (744) 18,000 84 dB(A) 6 (40) 3/8 (10) 3/8" NPT 3/8"-24 8.9 (4.0) 35-1/8 (892) 1-7/8 (48) Tune-Up Kit: No. 96532 (page 192)  • Additional Specifications: Air Pressure 90 PSIG (6.2 Bar)   1 hp Extension Grinders Straight-Line, Rear Exhaust Models, 8-3/8" Extension   Allows Efficient Work Within Long Pipes, Castings and More   • Extension Grinders allow operator to extend into work pieces and reach lengthy distances.   • Extension length of 8-3/8” allows longer reach than competitive models!   • Extensions are constructed of steel for maximum durability.  • Designed for minimal vibration. Extensions do not spin during tool use, so continuous tightening is not needed (as with some one-piece shaft-type extensions).  • Tools can also be fitted with optional Buffing Pads, optional collets and inserts, plus optional Cone/Plug Wheels. (Note: Speed of tool must not exceed maximum operating speed of accessory.)   Model 53521  3,400 RPM, 19-3/4" Length  Model 53522  3,400 RPM, 28-1/8" Length  Model 53523  3,400 RPM, 36-1/2" Length   Model 53531  18,000 RPM, 18-3/8" Length  Model 53532  18,000 RPM, 26-3/4" Length  Model 53533  18,000 RPM, 35-1/8" Length   Optional 53621 Overhose Assembly may be used to further reduce noise levels by as much as 5 dB(A). Overhose redirects exhaust away from operator and workpiece. Air line sold separately. (See page 157.)   25-1/8"   16-3/4"   8-3/8"   Model 53531  Model 53532 Model 53533   Extend into hard-to-reach places by choosing the suitable extension for the job.   NEW! NEW!   Model 53533     2" Dia. Disc Sanders ................................ 111 3" Dia. Disc Sanders ................................ 113 4" Dia. Disc Sanders ................................ 114   4-1/2" - 5" Dia. Disc Sanders ...................... 115 7" Dia. Disc Sanders ................................ 118     111  2" Dia. Disc Sanders .4 hp and .5 hp Models   High Quality Air-Powered Disc Sanders   7° Offset, .4 hp, Rear Exhaust  • Includes 51344 Locking-Type Pad (2" diameter).  • Also accepts 3" diameter pads, sold separately.   • Handle is offset 7° for greater operator comfort and control.   • Gearless for reduced maintenance and down-time.  Model 52500  25,000 RPM  • Extended muffler design.  Model 52503  25,000 RPM  • Features standard muffler for more compact design.   7° Offset, .5 hp  • All models include 51344 Locking-Type Pad (2" diameter).  • Also accept 3" diameter pads, sold separately.   Model 52400  15,000 RPM, Front Exhaust  Model 52402  20,000 RPM, Front Exhaust  Model 52405  20,000 RPM, Rear Exhaust  • Extended muffler design.   ABRASIVE DISCS  2" (51 mm) diameter   Disc Pads: Page 181  • Abrasive Discs: Page 215  • Accessories: Page 159   Model Motor Motor Sound Maximum Air Flow Hose I.D. Size Air Inlet Tool Weight Length Height Number hp (W) RPM Level SCFM (LPM) Inch (mm) Thread Thread Pound (kg) Inch (mm) Inch (mm)  53410 .4 (298) 3,200 83 dB(A) 23 (650) 1/4 (6) 1/4" NPT 1/4"-28 Female 1.9 (0.9) 11-3/8 (289) 2-1/8 (56) Tune-Up Kit: No. 96333 (page 192)  • Additional Specifications:  Air Pressure 90 PSIG (6.2 Bar)   Model Motor Motor Sound Maximum Air Flow Hose I.D. Size Air Inlet Tool Weight Length Height Number hp (W) RPM Level SCFM (LPM) Inch (mm) Thread Thread Pound (kg) Inch (mm) Inch (mm)  52400 .5 (373) 15,000 81 dB(A) 26 (736) 3/8 (10) 1/4" NPT 1/4"-20 Male 1.7 (0.8) 6 (152) 5-1/2 (140) 52402 .5 (373) 20,000 82 dB(A) 28 (793) 3/8 (10) 1/4" NPT 1/4"-20 Male 1.7 (0.8) 6 (152) 5-1/2 (140) 52405  .5 (373) 20,000 79 dB(A) 25 (708) 3/8 (10) 1/4" NPT 1/4"-20 Male 2.3 (1.0) 8-1/8 (206) 5-1/2 (140) 52500 .4 (298) 25,000 75 dB(A) 20 (566) 1/4 (6) 1/4" NPT 1/4"-20 Male 1.3 (0.6) 9 (229) 3-3/4 (95) 52503 .4 (298) 25,000 82 dB(A) 20 (566) 1/4 (6) 1/4" NPT 1/4"-20 Male 1.3 (0.6) 7-1/2 (191) 3-3/4 (95) Tune-Up Kits: 52400, 52402, 52405 - No. 96044; 52500, 52503 - No. 96049 (page 192)  • Additional Specifications:  Air Pressure 90 PSIG (6.2 Bar)   Model 53410 Model 52503 Model 52405   Angle-Head, .4 hp, Rear Exhaust  Model 53410  3,200 RPM  • Tool has 1/4"-28 female thread. Comes mounted with 54021 Adapter for pads with 1/4"-20 female thread.  • Includes 50107 Pad (2" diameter) for PSA (adhesive backed) abrasive discs.   • Optional 54030 Rotary Sanding Head permits locking-type male thread pad to be mounted.   • Optional 54585 Side Handle available.  Important:  Speed of tool must not exceed maximum operating speed of accessory.    The use of a filter-regulator- lubricator will increase tool performance, extend tool life and lessen repair costs. (See page 162.)   DISC SANDERSDISC SANDERS     112 2" Dia. Disc Sanders .33 hp and .4 hp Models   High Quality Air-Powered Disc Sanders   Model 52540    12,000 RPM, Standard Muffler  Model 52541    15,000 RPM, Standard Muffler  Model 52542    20,000 RPM, Standard Muffler  Right Angle, .4 hp, Front Exhaust   • Includes 51344 Locking-Type Pad (2" diameter).   • Also accepts 3" diameter pads, sold separately.   • Optional safety-lock lever available.   Model 51820  12,000 RPM  Model 51821  15,000 RPM  Model 51822  20,000 RPM   ABRASIVE DISCS  2" (51 mm) and 3" (76 mm) diameter   Disc Pads: Page 181  • Abrasive Discs: Page 215  • Accessories: Page 159   Model 51822   Model Motor Motor Sound Maximum Air Flow Hose I.D. Size Air Inlet Tool Weight Length Height Number hp (W) RPM Level SCFM (LPM) Inch (mm) Thread Thread Pound (kg) Inch (mm) Inch (mm)  52520 .4 (298) 12,000 85 dB(A) 21 (595) 1/4 (6) 1/4" NPT 1/4"-20 Male 1.2 (0.5) 7-3/8 (187) 3-1/8 (79) 52521 .4 (298) 15,000 83 dB(A) 21 (595) 1/4 (6) 1/4" NPT 1/4"-20 Male 1.2 (0.5) 7-3/8 (187) 3-1/8 (79) 52522 .4 (298) 20,000 86 dB(A) 21 (595) 1/4 (6) 1/4" NPT 1/4"-20 Male 1.2 (0.5) 7-3/8 (187) 3-1/8 (79) 52540 .4 (298) 12,000 86 dB(A) 21 (595) 1/4 (6) 1/4" NPT 1/4"-20 Male 1.1 (0.5) 6 (152) 3-1/8 (79) 52541 .4 (298) 15,000 86 dB(A) 21 (595) 1/4 (6) 1/4" NPT 1/4"-20 Male 1.1 (0.5) 6 (152) 3-1/8 (79) 52542 .4 (298) 20,000 87 dB(A) 21 (595) 1/4 (6) 1/4" NPT 1/4"-20 Male 1.1 (0.5) 6 (152) 3-1/8 (79) Tune-Up Kit: No. 96179 (page 192)  • Additional Specifications:  Air Pressure 90 PSIG (6.2 Bar)   Model Motor Motor Sound Maximum Air Flow Hose I.D. Size Air Inlet Tool Weight Length Height Number hp (W) RPM Level SCFM (LPM) Inch (mm) Thread Thread Pound (kg) Inch (mm) Inch (mm)  51820 .4 (298) 12,000 85 dB(A) 3/21 (595) 1/4 (6) 1/4" NPT 1/4"-20 Male 1.1 (0.5) 5 (134) 3-1/8 (79) 51821 .4 (298) 15,000 84 dB(A) 3/21 (595) 1/4 (6) 1/4" NPT 1/4"-20 Male 1.1 (0.5) 5 (134) 3-1/8 (79) 51822 .4 (298) 20,000 87 dB(A) 3/21 (595) 1/4 (6) 1/4" NPT 1/4"-20 Male 1.1 (0.5) 5 (134) 3-1/8 (79) Tune-Up Kit: No. 96179 (page 192)  •  Additional Specifications:  Air Pressure 90 PSIG (6.2 Bar)   Model 52520   Model 52520 Disc Sander offers efficient weld removal.   Right Angle, .33 hp, Gearless, Rear Exhaust  Model 52590  18,000 RPM  • Includes 51345 Locking-Type Pad (2" diameter).  • Also accepts 3" diameter disc pads, sold separately.  • Features standard muffler for more compact design.  • Tool combines top efficiency with great value.   Model Motor Motor Sound Maximum Air Flow Hose I.D. Size Air Inlet Tool Weight Length Height Number hp (W) RPM Level SCFM (LPM) Inch (mm) Thread Thread Pound (kg) Inch (mm) Inch (mm)  52590  .33 (246) 18,000 81 dB(A) 20 (567) 1/4 (6) 1/4" NPT 3/8"-24 Male 1.9 (0.8) 4-1/2 (114) 3-7/8 (98) Tune-Up Kit: No. 96505 (page 192)  • Additional Specifications:  Air Pressure 90 PSIG (6.2 Bar)   Model 52590   Motor Tune-Up Kits can  extend the life of a tool,  when used as part of a regular preventative  maintenance schedule. (See page 192.)   Right Angle, .4 hp, Rear Exhaust  • Includes 51344 Locking-Type Pad (2" diameter).  • Also accepts 3" diameter pads, sold separately.   Model 52520    12,000 RPM, Extended Muffler  Model 52521    15,000 RPM, Extended Muffler  Model 52522    20,000 RPM, Extended Muffler   Important:  Speed of tool must not exceed maximum operating speed of accessory.  Important:  Speed of tool must not exceed maximum operating speed of accessory.   Important:  Speed of tool must not exceed maximum operating speed of accessory.    Dynaswivel ® air line connector is ideal for use with most air tools. The Dynaswivel  ® improves tool maneuverability, minimizes operator fatigue and extends hose life. (See page 163.)   DISC SANDERSDISC SANDERS     113  3" Dia. Disc Sanders .4 hp, .55 hp and .7 hp Models   High Quality Air-Powered Disc Sanders   ABRASIVE DISCS  3" (76 mm) diameter   Disc Pads: Page 181  • Abrasive Discs: Page 215  • Accessories: Page 159   Model Motor Motor Sound Maximum Air Flow Hose I.D. Size Air Inlet Tool Weight Length Height Number hp (W) RPM Level SCFM (LPM) Inch (mm) Thread Thread Pound (kg) Inch (mm) Inch (mm)  52410 .7 (522)  15,000 96 dB(A) 32 (906) 3/8 (10) 1/4" NPT 3/8"-24 Male 2.0 (0.9) 6 (152) 5-1/2 (140) 52412 .7 (522)  20,000 93 dB(A) 36 (1,019) 3/8 (10) 1/4" NPT 3/8"-24 Male 2.0 (0.9) 6 (152) 5-1/2 (140) 52413 .7 (522)  15,000 76 dB(A) 32 (906) 3/8 (10) 1/4" NPT 3/8"-24 Male 2.3 (1.0) 8-1/8 (206) 5-1/2 (140) 52415 .7 (522)  20,000 77 dB(A) 35 (991) 3/8 (10) 1/4" NPT 3/8"-24 Male 2.3 (1.0) 8-1/8 (206) 5-1/2 (140) Tune-Up Kit: No. 96045(page 192)  • Additional Specifications:  Air Pressure 90 PSIG (6.2 Bar)   Model Motor Motor Sound Maximum Air Flow Hose I.D. Size Air Inlet Tool Weight Length Height Number hp (W) RPM Level SCFM (LPM) Inch (mm) Thread Thread Pound (kg) Inch (mm) Inch (mm)  52557 .55 (410) 15,000 83 dB(A) 33 (934) 3/8 (10) 1/4" NPT 3/8"-24 Male 1.9 (0.8) 6 (152) 3-7/8 (98) 52558  .55 (410) 15,000 86 dB(A) 33 (934) 3/8 (10) 1/4" NPT 3/8"-24 Male 1.9 (0.8) 4-1/2 (114) 3-7/8 (98) Tune-Up Kit: No. 96522 (page 192)  • Additional Specifications:  Air Pressure 90 PSIG (6.2 Bar)   Model 52557   Right Angle, .55 hp, Gearless, Rear Exhaust  • Includes 51347 Locking-Type Pad (3" diameter).  • Removable side handle.   • Optional safety-lock lever available.  • Tool combines top efficiency with great value.  Model 52557  15,000 RPM, Extended Muffler  Model 52558  15,000 RPM, Standard Muffler 7° Offset, .7 hp, Gearless • Includes 51347 Locking-Type Pad (3" diameter).  • Removable side handle.  Model 52410  15,000 RPM, Front Exhaust  Model 52412  20,000 RPM, Front Exhaust  Model 52413  15,000 RPM, Rear Exhaust  Model 52415  20,000 RPM, Rear Exhaust  • Extended muffler design (52413 and 52415 only).   Model 52412   Model 52557   Right Angle, .4 hp, Rear Exhaust  • Includes 51346 Locking-Type Pad (3" diameter).   • Extended muffler design.   Model 52530  12,000 RPM        Model 52531  15,000 RPM  Model 52532  20,000 RPM  Model 52530   Model Motor Motor Sound Maximum Air Flow Hose I.D. Size Air Inlet Tool Weight Length Height Number hp (W) RPM Level SCFM (LPM) Inch (mm) Thread Thread Pound (kg) Inch (mm) Inch (mm)  52530 .4 (298) 12,000 85 dB(A) 21 (595) 1/4 (6) 1/4" NPT 1/4"-20 Male 1.2 (.5) 7-3/8 (187) 3-1/8 (79) 52531 .4 (298) 15,000 83 dB(A) 21 (595) 1/4 (6) 1/4" NPT 1/4"-20 Male 1.2 (.5) 7-3/8 (187) 3-1/8 (79) 52532 .4 (298) 20,000 86 dB(A) 21 (595) 1/4 (6) 1/4" NPT 1/4"-20 Male 1.2 (.5) 7-3/8 (187) 3-1/8 (79) Tune-Up Kit: No. 96179 (page 192)  • Additional Specifications:  Air Pressure 90 PSIG (6.2 Bar)   DISC SANDERSDISC SANDERS   Model 52531   Model 52412   Model 52531     114 4" Dia. Disc Sanders .7 hp, 1 hp and 1.3 hp Models   High Quality Air-Powered and Electric Disc Sanders   Right Angle, 1 hp, Rear Exhaust  Model 52560  12,000 RPM  • Includes 50192 Locking-Type Pad  (4" diameter).  • Reversible handle for right or left hand operation.  • One-piece, factory-certified governor design.  • Extended muffler design.   Pistol Grip, .7 hp, Gearless, Rear Exhaust  Model 50324  11,000 RPM  • Includes 50192 Locking-Type Pad (4" diameter); pad mounts to tool spindle without adapters.  • Governor speed control maintains RPM  under load.  • Gearless for reduced maintenance and  down-time.  • Removable side handle.   ABRASIVE DISCS  4" (102 mm) diameter   Disc Pads: Page 181  • Abrasive Discs: Page 215  • Accessories: Page 159   Model Motor Motor Sound Maximum Air Flow Hose I.D. Size Air Inlet Tool Weight Length Height Number hp (W) RPM Level SCFM (LPM) Inch (mm) Thread Thread Pound (kg) Inch (mm) Inch (mm)  52560 1 (744) 12,000 78 dB(A) 40 (1,138) 3/8 (10) 3/8" NPT 5/8"-11 Male 4.1 (1.8) 11-11/16 (296) 4-1/4 (108) Tune-Up Kit: No. 96532 (page 192)  • Additional Specifications:  Air Pressure 90 PSIG (6.2 Bar)   Model Motor Motor Sound Maximum Air Flow Hose I.D. Size Air Inlet Tool Weight Length Height Number hp (W) RPM Level SCFM (LPM) Inch (mm) Thread Thread Pound (kg) Inch (mm) Inch (mm)  50324 .7 (522) 11,000 79 dB(A) 32 (906) 3/8 (10) 1/4" NPT 3/8"-24 Male 2.2 (1.0) 6-5/8 (168) 5-5/8 (143) Tune-Up Kit: No. 96047 (page 192)  • Additional Specifications:  Air Pressure 90 PSIG (6.2 Bar)   Model 52560   Model 52560   Model 50324  Model 50324  Model 50324   4" Diameter, Right Angle, 1.3 hp, Gearless  Model 51370  12,000 RPM  • Includes 50192 Locking-Type Pad (4" diameter).  • Reversible handle for right or left hand operation.  • Gearless for reduced maintenance and down-time.  • Features standard muffler for more compact design; rear exhaust.  • Tool combines top efficiency with great value.   Model Motor Motor Sound Maximum Air Flow Hose I.D. Size Air Inlet Tool Weight Length Height Number hp (W) RPM Level SCFM (LPM) Inch (mm) Thread Thread Pound (kg) Inch (mm) Inch (mm)  51370 1.3 (969) 12,000 85 dB(A) 50 (1,416) 1/2 (13) 3/8" NPT 3/8"-24 Male 4.5 (2.0) 10-7/16 (265) 4-7/16 (112) Tune-Up Kit: No. 96504 (page 192)  • Additional Specifications:  Air Pressure 90 PSIG (6.2 Bar)   Model 51370   Model  51370   DISC SANDERSDISC SANDERS     115  4-1/2" Dia. Disc Sanders .55 hp and 1.3 hp Models   High Quality Air-Powered Disc Sanders   Light Duty Models 4-1/2" Diameter, Right Angle, .55 hp  • .55 hp models are ideal for light duty applications on metal, fiberglass and more.  • Gearless for reduced maintenance and downtime.  • Disc mount and flange nut included; 7/8" center hole  abrasives are flange-mounted. Rear exhaust.  • Each model combines top efficiency with great value.  Model 52515  15,000 RPM, 5/8"-11 Thread  • Includes 50267 Disc Pad (4-1/2" diameter).  Model 52516  15,000 RPM, 5/8"-11 Thread  • Includes 50267 Disc Pad, 07184 Guard and 01462 Safety-Lock Lever.  Model 52518  15,000 RPM, M14x2 Thread  • Includes 07184 Guard and 01462 Safety-Lock Lever. (Disc Pad not included.)   4-1/2" Diameter, Right Angle, 1.3 hp  Model 51371  12,000 RPM  • Includes 51148 Disc Pad (4-1/2" diameter).  • Gearless for reduced maintenance and downtime.  • Offers higher horsepower and torque levels than similar competitive tools. Rear exhaust.  • Side handle included for comfortable operation and reduced vibration levels.  • Features spindle-lock for easy pad change.  • Tool combines top efficiency with great value.   ABRASIVE DISCS  4" (102 mm) and  4-1/2" (114 mm) diameter   Disc Pads: Page 181  • Abrasive Discs: Page 217  • Accessories: Page 159   Model Motor Motor Sound Maximum Air Flow Hose I.D. Size Air Inlet Tool Weight Length Height Number hp (W) RPM Level SCFM (LPM) Inch (mm) Thread Thread Pound (kg) Inch (mm) Inch (mm)  51371 1.3 (969) 12,000 85 dB(A) 50 (1,416) 1/2 (13) 3/8" NPT 5/8"-11 Male 4.5 (2.0) 10-7/16 (265) 4-7/16 (112) Tune-Up Kit: No. 96504 (page 192)  • Additional Specifications:  Air Pressure 90 PSIG (6.2 Bar)   Model Motor Motor Sound Maximum Air Flow Hose I.D. Size Air Inlet Tool Weight Length Height Number hp (W) RPM Level SCFM (LPM) Inch (mm) Thread Thread Pound (kg) Inch (mm) Inch (mm)  52515 .55 (410) 15,000 83 dB(A) 33 (934) 3/8 (10) 1/4" NPT 5/8"-11 Male 1.9 (0.8) 6 (152) 3-7/8 (98) 52516 .55 (410) 15,000 83 dB(A) 33 (934) 3/8 (10) 1/4" NPT 5/8"-11 Male 1.9 (0.8) 6 (152) 3-7/8 (98) 52518 .55 (410) 15,000 83 dB(A) 33 (934) 3/8 (10) 1/4" NPT M14x2 1.9 (0.8) 6 (152) 3-7/8 (98) Tune-Up Kit: No. 96522 (page 192)  • Additional Specifications:  Air Pressure 90 PSIG (6.2 Bar)   Model 52515 Model 51371   The use of a filter-regulator- lubricator will increase tool performance, extend tool life and lessen repair costs. (See page 162.)   Model 52515   DISC SANDERSDISC SANDERS     116 4-1/2"-5" Dia. Disc Sanders .7 hp and 1 hp Models   High Quality Air-Powered Disc Sanders   ABRASIVE DISCS  4-1/2" (114 mm) to 5" (127 mm) diameter   Disc Pads: Page 181  • Abrasive Discs: Page 217  • Accessories: Page 159   Model Motor Motor Sound Maximum Air Flow Hose I.D. Size Air Inlet Tool Weight Length Height Number hp (W) RPM Level SCFM (LPM) Inch (mm) Thread Thread Pound (kg) Inch (mm) Inch (mm)  52561 1 (744) 11,000 79 dB(A) 41 (1,172) 3/8 (10) 3/8" NPT 5/8"-11 Male 4 (1.8) 11-11/16 (296) 3-3/4 (95) 52562 1 (744) 9,000 80 dB(A) 39 (1,116) 3/8 (10) 3/8" NPT 5/8"-11 Male 4 (1.8) 11-11/16 (296) 3-3/4 (95) 52564 1 (744) 9,000 80 dB(A) 39 (1,116) 3/8 (10) 3/8" NPT M14x2 Male 4 (1.8) 11-11/16 (296) 3-3/4 (95) 52565 1 (744) 11,000 79 dB(A) 41 (1,172) 3/8 (10) 3/8" NPT M14x2 Male 4 (1.8) 11-11/16 (296) 3-3/4 (95) 52566 1 (744) 12,000 78 dB(A) 40 (1,138) 3/8 (10) 3/8" NPT M14x2 Male 4 (1.8) 11-11/16 (296) 3-3/4 (95) Tune-Up Kit: No. 96532 (page 192)  • Additional Specifications: Air Pressure 90 PSIG (6.2 Bar)   Pistol Grip, .7 hp, Rear Exhaust  • Each model includes 50267 Disc Pad Assembly for slotted center-hole abrasive discs.   • Gearless motor for reduced maintenance and downtime.  • Governor-controlled to maintain RPM under heavy load.  • Removable side handle.  Model 50320  8,000 RPM  Model 50321  11,000 RPM   Model Motor Motor Sound Maximum Air Flow Hose I.D. Size Air Inlet Tool Weight Length Height Number hp (W) RPM Level SCFM (LPM) Inch (mm) Thread Thread Pound (kg) Inch (mm) Inch (mm)  50320 .7 (522) 8,000 75 dB(A) 30 (850) 3/8 (10) 1/4" NPT 5/8"-11 Male 2.2 (1.0) 6-5/8 (168) 5-5/8 (143) 50321 .7 (522) 11,000 79 dB(A) 32 (906) 3/8 (10) 1/4" NPT 5/8"-11 Male 2.2 (1.0) 6-5/8 (168) 5-5/8 (143) Tune-Up Kit: No. 96047 (page 192)  • Additional Specifications: Air Pressure 90 PSIG (6.2 Bar)   Model 50320   Model 50321   Dynaswivel ® air line connector is ideal for use with most air tools. The Dynaswivel  ® improves tool maneuverability, minimizes operator fatigue and extends hose life. (See page 163.)   Right: 50321 Pistol-Grip  Disc Sander quickly  and effectively removes excess fiberglass.   Motor Tune-Up Kits will extend the life of an air tool when used with a preventative maintenance schedule. (See page 192.)   Right Angle, 1 hp, Rear Exhaust  • Extended muffler for reduced sound levels.  • Reversible side handle for left or right hand operation.   5/8"-11 Thread Models  Model 52562  9,000 RPM  • Includes 51150 Disc Pad Assembly.  Model 52561  11,000 RPM  • Includes 51148 Disc Pad Assembly.    M14 Male Thread Models  • Ideal for use with 115-127 mm diameter  Disc Pads with M14 female thread  (sold separately).  Model 52564  9,000 RPM  Model 52565  11,000 RPM  Model 52566  12,000 RPM   Model 52561   DISC SANDERSDISC SANDERS     117  4-1/2"-5" Dia. Disc Sanders 1.2 hp Models   High Quality Air-Powered Disc Sanders   Vertical, 1.2 hp, Side Exhaust  • Each model Includes 51150 Disc Pad Assembly (5" diameter).   • Powerful air motor is governor-controlled to maintain  RPM under heavy load.  • Safety-lock throttle lever prevents accidental start-up.  • Side handle increases control and reduces hand fatigue.  • For best performance use 98273 Coupler and  Plug Assembly.  Model 50304  8,500 RPM  Model 50307  11,000 RPM   ABRASIVE DISCS  4-1/2" (114 mm) to 5" (127 mm) diameter   Disc Pads: Page 181  • Abrasive Discs: Page 217  • Accessories: Page 159   Model Motor Motor Sound Maximum Air Flow Hose I.D. Size Air Inlet Tool Weight Length Height Number hp (W) RPM Level SCFM (LPM) Inch (mm) Thread Thread Pound (kg) Inch (mm) Inch (mm)  50304 1.2 (895) 8,500 75 dB(A) 32 (906) 1/2 (13) 1/2" NPT 5/8"-11 Male 4.0 (1.8) 8 (203) 6 (152) 50307 1.2 (895) 11,000 78 dB(A) 36 (1,020) 1/2 (13) 1/2" NPT 5/8"-11 Male 4.0 (1.8) 8 (203) 6 (152) Tune-Up Kit: No. 96011 (page 192)  • Additional Specifications: Air Pressure 90 PSIG (6.2 Bar)   Model 50307   Right Angle, 1.2 hp, Rear Exhaust  • Each model includes 51150 Disc Pad Assembly (5" diameter).  • Powerful air motor is governor-controlled to maintain  RPM under heavy load.  • Lubricated gears increase durability.  • Reversible side handle increases control and reduces fatigue.  • Safety-lock throttle lever prevents accidental start-up.  • NOTE: For maximum performance,  optional 95870 air hose (1/2" dia.)  is recommended.  Model 50345  8,500 RPM  Model 50360  12,000 RPM   Model Motor Motor Sound Maximum Air Flow Hose I.D. Size Air Inlet Tool Weight Length Height Number hp (W) RPM Level SCFM (LPM) Inch (mm) Thread Thread Pound (kg) Inch (mm) Inch (mm)  50345 1.2 (895) 8,500 76 dB(A) 43 (1,218) 1/2 (13) 1/2" NPT 5/8"-11 Male 4.8 (2.2) 11-3/4 (298) 3-1/8 (80) 50360 1.2 (895) 12,000 82 dB(A) 41 (1,161) 1/2 (13) 1/2" NPT 5/8"-11 Male 4.8 (2.2) 11-3/4 (298) 3-1/8 (80) Tune-Up Kit: No. 96011 (page 192)  • Additional Specifications: Air Pressure 90 PSIG (6.2 Bar)   Model 50345   The use of a filter-regulator- lubricator will increase tool performance, extend tool life and lessen repair costs. (See page 162.)   95462 Dynaswivel ® air line connector is ideal for use with these tools. Dynaswivel ® improves tool maneuverability, minimizes operator fatigue and extends hose life. (See page 163.)   DISC SANDERSDISC SANDERS     118 7" Dia. Disc Sanders 1 hp, 1.2 hp and 2 hp Models   High Quality Air-Powered Disc Sanders   ABRASIVE DISCS  7" (178 mm) diameter   Disc Pads: Page 181  • Accessories: Page 159   Model Motor Motor Sound Maximum Air Flow Hose I.D. Size Air Inlet Tool Weight Length Height Number hp (W) RPM Level SCFM (LPM) Inch (mm) Thread Thread Pound (kg) Inch (mm) Inch (mm)  50347 2 (1,491) 6,000 82 dB(A) 71 (2,011) 1/2 (13) 1/2" NPT 5/8"-11 Male 6.9 (3.1) 13-3/4 (349) 3-5/8 (92) 50349 1.2 (895) 6,000 79 dB(A) 43 (1,218) 1/2 (13) 1/2" NPT 5/8"-11 Male 4.8 (2.2) 11-3/4 (298) 3-1/8 (79) 52563 1 (744) 6,000 82 dB(A) 40 (1,127) 3/8 (10) 3/8" NPT 5/8"-11 Male 4.1 (1.8) 11-11/16 (296) 3-3/4 (95) 52567 1 (744) 6,000 82 dB(A) 40 (1,127) 3/8 (10) 3/8" NPT M14 Male 4.1 (1.8) 11-11/16 (296) 3-3/4 (95) Tune-Up Kits: 50347 - 96043; 50349 - No. 96042; 52563, 52567 - No. 96532 (page 192)  • Additional Specifications:  Air Pressure 90 PSIG (6.2 Bar)   Model 52563  Model 52450   95462 Dynaswivel ®   air line connector is  ideal for use with these  tools. (See page 163.)   Model Motor Motor Sound Maximum Air Flow Hose I.D. Size Air Inlet Tool Weight Length Height Number hp (W) RPM Level SCFM (LPM) Inch (mm) Thread Thread Pound (kg) Inch (mm) Inch (mm)  52450 2 (1,491) 6,000 82 dB(A) 60 (1,699) 1/2 (13) 1/2" NPT 5/8"-11 Male 9 (4.1) 13 (330) 8-1/4 (210) 52451 2 (1,491) 7,200 84 dB(A) 66 (1,869) 1/2 (13) 1/2" NPT 5/8"-11 Male 9 (4.1) 13 (330) 8-1/4 (210) 52454 2 (1,491) 8,500 86 dB(A) 73 (2,067) 1/2 (13) 1/2" NPT 5/8"-11 Male 9 (4.1) 13 (330) 8-1/4 (210) Tune-Up Kit: No. 96259 (page 192)  • Additional Specifications:  Air Pressure 90 PSIG (6.2 Bar)   Vertical, Side Exhaust, 5/8"-11 Thread  • Each model includes 51151 Disc Pad Assembly  (7" diameter).  • Gearless for reduced maintenance and downtime.  • Governor-controlled to maintain RPM under heavy load.  • Safety-lock throttle lever. Removable side handle.  • NOTE: For optimum performance, optional 95870  air hose (1/2" dia.) is recommended.  Model 52450  6,000 RPM  Model 52451  7,200 RPM  Model 52454  8,500 RPM  Right Angle, 6,000 RPM   • Air motor is governor-controlled to maintain RPM under heavy load.  • Lubricated gears increase durability.  • Side handle is reversible for left or right hand operation.  • Safety-lock throttle lever included.   Rear Exhaust Models  Model 52563  1 hp, 5/8"-11 Thread  • Includes 51151 Disc Pad Assembly (7" diameter).  Model 52567  1 hp, M14 Thread  • Disc Pad Assembly not included.   Side Exhaust Models  • Each model includes  51151 Disc Pad Assembly  (7" diameter).  Model 50349  1.2 hp, 5/8"-11 Thread  Model 50347  2 hp, 5/8"-11 Thread   Model 50349   The use of a filter- regulator-lubricator will increase tool performance, extend tool life and lessen  repair costs. (See page 162.)   DISC SANDERSDISC SANDERS     Depressed Center Wheel Grinders ................ 120 Type 1 Wheel Grinders .............................. 125 Cone/Plug Wheel Grinders .......................... 126   Cut-Off Wheel Tools .................................. 127 Vacuum Cut-Off Wheel Tools........................ 129     120   For Fast Weld and Stock Removal, Rust and Scale Removal, Heavy Deburring   GRINDERS   2" Diameter, Right Angle, .4 hp, Rear Exhaust  • Each model includes 90999 Depressed Center Wheel (24 grit),  2" diameter with 3/8" center hole. Guard and wheel flange set also included.  • Compact, short muffler design.  • Optional 01462 Safety-Lock Throttle is available.  Model 52710  12,000 RPM  Model 52711  15,000 RPM  Model 52712  20,000 RPM   GRINDERS   TYPE 27 REINFORCED DEPRESSED CTR. WHEELS   2", 3" Dia. (51 mm, 76 mm)   Depressed Center Wheels: Page 222  •  Accessories: Page 159   Depressed Center Wheel Grinders Air-Powered Grinders, 2" and 3" Diameter    Model 52710 Model 52700   Model 57127   Model Motor Motor Sound Maximum Air Flow Hose I.D. Size Air Inlet Spindle Weight Length Height Number hp (W) RPM Level SCFM (LPM) Inch (mm) Thread Thread Pound (kg) Inch (mm) Inch (mm)  52700 .7 (522) 18,000 86 dB(A) 32 (906) 3/8 (10) 1/4" NPT 3/8"-24 Male 2.2 (1.0) 7-1/4 (184) 4-1/2 (114) 52710 .4 (298) 12,000 86 dB(A) 21 (595) 1/4 (6) 1/4" NPT 3/8"-24 Male 1.1 (.5) 5-3/4 (146) 3 (76) 52711 .4 (298) 15,000 86 dB(A) 21 (595) 1/4 (6) 1/4" NPT 3/8"-24 Male 1.1 (.5) 5-3/4 (146) 3 (76) 52712 .4 (298) 20,000 87 dB(A) 21 (595) 1/4 (6) 1/4" NPT 3/8"-24 Male 1.1 (.5) 5-3/4 (146) 3 (76) 57127 .55 (410) 15,000 83 dB(A) 33 (934) 3/8 (10) 1/4" NPT 3/8"-24 Male 1.9 (.8) 6 (152) 3-7/8 (98) Tune-Up Kits: 2" Diameter Models - 96179; 57200 - 96045; 57127 - 96522 (page 192)  • Additional Specifications: Air Pressure 90 PSIG (6.2 Bar)   Use ONLY Type 27 Reinforced Depressed Center Wheels  (sold separately, unless noted) with these models.   3" Diameter, Right Angle, .55 hp, Rear Exhaust  Model 57127  15,000 RPM  • Accepts optional 3" diameter Type 27 Depressed Center Wheel,  with 3/8" center hole (wheel width of 1/8" to 1/4").  • Powerful high-torque grinding action; standard muffler for  reduced sound levels.  • Gearless design for reduced maintenance and downtime.  • Removable side handle. Also includes safety-lock  throttle lever, plus guard and wheel flange set.   3" Diameter, 7° Offset, .7 hp, Front Exhaust  Model 52700  18,000 RPM  • Accepts optional 3" diameter Type 27 Depressed Center Wheels,  with 3/8" center hole (wheel width of 1/8" to 1/4").  • Powerful high-torque grinding action.  • Gearless design for reduced maintenance and downtime.  • Handle is offset 7° for enhanced operator comfort.   • Removable side handle; guard and wheel flange  set included.  • Easily converts to 1/4" Die Grinder (with optional  50010 Collet), or Drill (with optional 53032 Chuck).   Wheel Sold  Separately   Wheel Sold  Separately   Important:  Speed of tool must not exceed maximum operating speed of accessory. Never mount bonded grinding wheels. Always wear  eye, face & body protection.     121  Depressed Center Wheel Grinders Air-Powered Grinders, 3" and 4" Diameter   For Fast Weld and Stock Removal, Rust and Scale Removal, Heavy Deburring   GRINDERSGRINDERS   TYPE 27 REINFORCED  DEPRESSED CTR. WHEELS   3", 4" Dia. (89 mm, 102 mm)   Accessories: Page 159   3" Diameter, Right Angle, .4 hp, Rear Exhaust  Model 52705  15,000 RPM  • Accepts optional 3" diameter Type 27 Reinforced Depressed Center Wheel, with 3/8" center hole (wheel width of 1/8" to 1/4").  • “Dual wick” lubrication system saturates gears with oil for increased performance, extended life and reduced downtime (following proper maintenance procedures).  • 15,000 RPM air motor has Kevlar ® phenolic vanes for longer life.  • Air passage continually cools gear box to reduce wear and  heat buildup.  • Safety-lock throttle lever, wheel guard and flanges are included.   Model 52705   4" Diameter, Right Angle, .4 hp, Rear Exhaust  Model 52706  12,000 RPM  • Accepts optional 4" diameter Type 27 Reinforced Depressed Center Grinding Wheel, with 5/8" center hole (wheel width of 1/8" to 1/4").  • “Dual wick” lubrication system saturates gears with oil for increased performance, extended life and reduced downtime (following proper maintenance procedures).  • 12,000 RPM air motor has Kevlar ® phenolic vanes for longer life.  • Air passage continually cools gear box to reduce wear and  heat buildup.  • Safety-lock throttle lever, wheel guard and flanges are included.   Model 52706   Important:  Speed of tool must not exceed maximum operating speed of accessory. Never mount bonded grinding wheels. Always wear  eye, face & body protection.   Model Motor Motor Sound Maximum Air Flow Hose I.D. Size Air Inlet Spindle Weight Length Height Number hp (W) RPM Level SCFM (LPM) Inch (mm) Thread Thread Pound (kg) Inch (mm) Inch (mm)  50302 1 (744) 12,000 78 dB(A) 40 (1,138) 3/8 (10) 3/8" NPT 3/8"-24 Male 4.5 (2.0) 11-3/4 (299) 3-5/8 (92) 52705 .4 (298) 15,000 79 dB(A) 24 (680) 1/4 (6) 1/4" NPT 3/8"-24 Male 1.6 (0.7) 8-1/4 (210) 2-5/8 (67) 52706 .4 (298) 12,000 81 dB(A) 23 (651) 1/4 (6) 1/4" NPT 3/8"-24 Male 1.7 (0.8) 7-1/2 (189) 3 (76) Tune-Up Kits: 50302 - No. 96532; 52705, 52706 - No. 96179; (page 192)  • Additional Specifications: Air Pressure 90 PSIG (6.2 Bar)   Wheel Sold  Separately  Wheel Sold  Separately  Wheel Sold  Separately   Model 50302   Always use required wheel guard. Never remove a guard that is specified for a tool.   4" Diameter, Right Angle, 1 hp, Rear Exhaust  Model 50302  12,000 RPM  • Accepts optional 4" diameter Type 27 Depressed Center Wheel, with 5/8" center hole (wheel width of 1/8" to 1/4").  • Powerful high-torque grinding action; standard muffler for  reduced sound levels.  • Reversible side handle  for left or right hand  operation.     122 Depressed Center Wheel Grinders Electric & Air-Powered Grinders, 4-1/2"- 5" Diameter    For Fast Weld and Stock Removal, Rust and Scale Removal, Heavy Deburring   GRINDERSGRINDERS   TYPE 27 REINFORCED  DEPRESSED CTR. WHEELS   4-1/2" - 5" Dia.  (114 mm - 127 mm)   Accessories: Page 159   Model 50340   4-1/2"- 5" Diameter, Pistol Grip, .7 hp, Rear Exhaust  Model 50340  11,000 RPM  • Accepts optional Type 27 Depressed Center Wheel in diameters of 4-1/2" and 5", with 7/8" center hole. (Wheel width of 1/8" to 1/4".)  • Governor controlled motor to maintain RPM under heavy load.  • Gearless design for reduced maintenance and downtime.  • Removable side handle, guard and wheel flange set included.   Use ONLY Type 27 Reinforced Depressed Center Wheels  (sold separately, unless noted) with these models.   4-1/2"- 5" Diameter, Right Angle, 12,000 RPM  • All models accept optional Type 27 Depressed Center Wheel in diameters of 4-1/2" and 5", with 7/8" center hole (wheel width  of 1/8" to 1/4").  • Standard muffler for reduced sound levels.  • Reversible handle for right or left hand operation.  • Guard and wheel flange set included. Safety-lock throttle lever.   Model 50306    1 hp, 5/8"-11 Male Spindle, Rear Exhaust  Model 50308    1 hp, M14 Male Spindle, Rear Exhaust  Model 50346    1.2 hp, 5/8"-11 Male Spindle, Side Exhaust   Important:  Speed of tool must not exceed maximum operating speed of accessory. Never mount bonded grinding wheels. Always wear  eye, face & body protection.   Model 50346   Model Motor Motor Sound Maximum Air Flow Hose I.D. Size Air Inlet Spindle Weight Length Height Number hp (W) RPM Level SCFM (LPM) Inch (mm) Thread Thread Pound (kg) Inch (mm) Inch (mm)  50306 1 (744) 12,000 78 dB(A) 40 (1,138) 3/8 (10) 3/8" NPT 5/8"-11 Male 4.8 (2.2) 11-3/4 (299) 3-13/16 (98) 50308 1 (744) 12,000 78 dB(A) 40 (1,138) 3/8 (10) 3/8" NPT M14 Male 4.8 (2.2) 11-3/4 (299) 3-13/16 (98) 50340 .7 (522) 11,000 79 dB(A) 32 (906) 3/8 (10) 1/4" NPT 5/8"-11 Male 4.6 (2.1) 8 (203) 6-5/8 (168) 50346 1.2 (893) 12,000 87 dB(A) 41 (1,161) 1/2 (15) 1/2" NPT 5/8"-11 Male 5.7 (2.6) 11-3/4 (298) 4-5/8 (118) Tune-Up Kits: 50306, 50308 - No. 96532; 50340 - No. 96047; 50346 - No. 96042 (page 192)  • Additional Specifications: Air Pressure 90 PSIG (6.2 Bar)   Wheel Sold  Separately   Wheel Sold  Separately     123  Depressed Center Wheel Grinders Air-Powered Grinders, 4-1/2"- 5" Diameter    For Fast Weld and Stock Removal, Rust and Scale Removal, Heavy Deburring   GRINDERSGRINDERS   TYPE 27 REINFORCED  DEPRESSED CTR. WHEELS   4-1/2" - 5" Dia.  (114 mm - 127 mm)   Accessories: Page 159   4-1/2"- 5" Diameter, Vertical, 1.2 hp, Side Exhaust  Model 50303  12,000 RPM  • Accepts optional Type 27 Depressed Center Wheel in diameters  of 4-1/2" and 5", with 7/8" center hole (wheel width of 1/8"  to 1/4").  • Powerful air motor is governor-controlled to maintain RPM under heavy load.  • Gearless for reduced maintenance and downtime.  • Safety-lock throttle lever prevents accidental startup.  Side handle increases safety and reduces hand fatigue.    • Guard and wheel flange set included.    Model Motor Motor Sound Maximum Air Flow Hose I.D. Size Air Inlet Spindle Weight Length Height Number hp (W) RPM Level SCFM (LPM) Inch (mm) Thread Thread Pound (kg) Inch (mm) Inch (mm)  50303 1.2 (895) 12,000 84 dB(A) 38 (1,076) 1/2 (13) 1/2" NPT 5/8"-11 Male 5.4 (2.4) 8 (203) 6-5/8 (168) 52620 1.3 (967) 12,000 85 dB(A) 50 (1,416) 1/2 (13) 3/8" NPT 5/8"-11 Male 5.5 (2.5) 10-7/16 (265) 4-7/16 (112) 52625 1.3 (967) 12,000 85 dB(A) 50 (1,416) 1/2 (13) 3/8" NPT M14x2 5.5 (2.5) 10-7/16 (265) 4-7/16 (112) Tune-Up Kits: 50303 - No. 96011; 52620, 52625 - No. 96504 (page 192)  • Additional Specifications: Air Pressure 90 PSIG (6.2 Bar)   Green Corps is a trademark of 3M Company   Important:  Speed of tool must not exceed maximum operating speed of accessory. Never mount bonded grinding wheels. Always wear  eye, face & body protection.   Model 50303   Use ONLY Type 27 Reinforced Depressed Center Wheels  (sold separately, unless noted) with these models.   5" Diameter, Right Angle, 1.3 hp, Rear Exhaust  • Each model accepts optional 5" diameter Type 27 Depressed Center Wheel, with 7/8" center hole (wheel width of 1/8" to 1/4").  • High-torque air motor.  • Gearless design for reduced maintenance and downtime.  • Thermal-insulated handle reduces cold air transmission.  Model 52620  12,000 RPM, 5/8"-11 Spindle Thread  Model 52625  12,000 RPM, M14 Spindle Thread  • M14x2 male thread is ideal setup for 3M Green Corps™ Wheels.   Model 52620 Model 52620   Wheel Sold  Separately  Wheel Sold  Separately   Always use required wheel guard. Never remove a guard that is specified for a tool.   52620 Depressed Center Wheel Grinder takes down a weld.   Wheel Sold  Separately     124 Depressed Center Wheel Grinders Air-Powered Grinders, 7" Diameter    For Fast Weld and Stock Removal, Rust and Scale Removal, Heavy Deburring   GRINDERSGRINDERS   TYPE 27 REINFORCED  DEPRESSED CTR. WHEELS   7" (178 mm) Diameter   Accessories: Page 159   7" Diameter, Right Angle, 1.2 hp, Side Exhaust  Model 50350  6,000 RPM  • Accepts optional 7" diameter Type 27 Depressed Center Wheel, with 7/8" center hole (wheel width of 1/8" to 1/4").  • Includes 11399 Type 27 Wheel Mounting Adapter Kit, with front and rear flange plus hex wrench.   • Optional 52190 Guard is available, for left hand operation.   Model 50350   7" Diameter, Vertical, 2 hp, Side Exhaust  • Each model accepts optional 7" diameter Type 27 Depressed Center Wheel, with 7/8" center hole (wheel width of 1/8"  to 1/4").  • Includes 11399 Type 27 Wheel Mounting Adapter Kit, with front and rear flange plus hex wrench.   Model 52452  6,000 RPM  Model 52453  7,200 RPM  Model 52455  8,500 RPM   Model 52452   7" Diameter, Right Angle, 2 hp, Side Exhaust  Model 50348  6,000 RPM  • Accepts optional 7" diameter Type 27 Depressed Center Wheel, with 7/8" center hole (wheel width of 1/8" to 1/4").  • Includes 11399 Type 27 Wheel Mounting Adapter Kit, with front and rear flange plus hex wrench.  • Powerful air motor is governor-controlled to maintain RPM under heavy load, and to insure smooth operation. Lubricated gears increase durability.  • Safety-lock throttle lever prevents accidental startup. Side handle enhances operator control. Rubber insulated grip reduces cold on operator’s hand.    Model 50348   Model Motor Motor Sound Maximum Air Flow Hose I.D. Size Air Inlet Spindle Weight Length Height Number hp (W) RPM Level SCFM (LPM) Inch (mm) Thread Thread Pound (kg) Inch (mm) Inch (mm)  50348 2.0 (1,491) 6,000 86 dB(A) 64 (1,812) 1/2 (13) 1/2" NPT 5/8"-11 Male 8.6 (3.9) 13-3/4 (349) 5-1/4 (132) 50350 1.2 (893) 6,000 83 dB(A) 43 (1,218) 1/2 (13) 1/2" NPT 5/8"-11 Male 6.8 (3.1) 11-3/4 (298) 4-5/8 (118) 52452 2.0 (1,491) 6,000 82 dB(A) 61 (1,728) 1/2 (13) 1/2" NPT 5/8"-11 Male 9.4 (4.2) 13 (330) 8-1/4 (210) 52453 2.0 (1,491) 7,200 84 dB(A) 66 (1,869) 1/2 (13) 1/2" NPT 5/8"-11 Male 9.4 (4.2) 13 (330) 8-1/4 (210) 52455 2.0 (1,491) 8,500 86 dB(A) 73 (2,067) 1/2 (13) 1/2" NPT 5/8"-11 Male 9.4 (4.2) 13 (330) 8-1/4 (210) Tune-Up Kits: 50348 - No. 96043; 50350 - No. 96042; 52452-52455 - No. 96259 (page 192)  • Additional Specifications: Air Pressure 90 PSIG (6.2 Bar)   Important:  Speed of tool must not exceed maximum operating speed of accessory. Never mount bonded grinding wheels. Always wear  eye, face & body protection.   Wheel Sold  Separately  Wheel Sold  Separately  Wheel Sold  Separately   Always use required wheel guard. Never remove a guard that is specified for a tool.     125  Type 1 Wheel Grinders Air-Powered Grinders, 3 and 4" Diameter   Clean Metal, Grind and Smooth Weld Seams, Remove Imperfections Prior to Painting   GRINDERSGRINDERS   REINFORCED TYPE 1 GRINDING WHEELS  3" and 4" Diameters (76 mm and 102 mm)   Accessories: Page 159   Model 52376   4" Diameter, Straight Line, 1 hp, 6" Extension  • Each model accepts optional 4" diameter Type 1 Wheel, with  3/8" center hole (maximum wheel width of 1/4").  • Governor-controlled motor maintains RPM under heavy load;  rear exhaust.  • Safety-lock lever is included on all models.  • Standard cushioned grip enhances operator comfort and  allows additional control.   Model 52379  12,000 RPM  Model 52380  15,000 RPM   Model 52379   4" Diameter, Straight Line, 1 hp  • Each model accepts optional 4" diameter Type 1 Wheel, with  3/8" center hole (maximum wheel width of 1/4").  • Governor-controlled motor maintains RPM under heavy load;  rear exhaust.  • Safety-lock lever is included on all models.  Model 52373  12,000 RPM  Model 52374  15,000 RPM   Model 52373   Model Motor Motor Sound Maximum Air Flow Hose I.D. Size Air Inlet Spindle Weight Length Height Number hp (W) RPM Level SCFM (LPM) Inch (mm) Thread Thread Pound (kg) Inch (mm) Inch (mm)  52373 1.0 (744) 12,000 82 dB(A) 38 (1,076) 3/8 (10) 3/8" NPT 3/8"-24 Male 2.7 (1.2) 8-5/8 (218) 4-1/2 (113) 52374 1.0 (744) 15,000 83 dB(A) 39 (1,104) 3/8 (10) 3/8" NPT 3/8"-24 Male 2.8 (1.3) 9-3/4 (248) 4-1/2 (113) 52376 1.0 (744) 12,000 82 dB(A) 38 (1,076) 3/8 (10) 3/8" NPT 3/8"-24 Male 3.9 (1.8) 14-1/4 (362) 3-1/2 (89) 52377 1.0 (744) 15,000 83 dB(A) 39 (1,104) 3/8 (10) 3/8" NPT 3/8"-24 Male 3.9 (1.8) 14-1/4 (362) 3-1/2 (89) 52378 1.0 (744) 18,000 84 dB(A) 40 (1,133) 3/8 (10) 3/8" NPT 3/8"-24 Male 3.9 (1.8) 14-1/4 (362) 3-1/2 (89) 52379 1.0 (744) 12,000 82 dB(A) 38 (1,076) 3/8 (10) 3/8" NPT 3/8"-24 Male 3.9 (1.8) 14-1/4 (362) 4-1/2 (113) 52380 1.0 (744) 15,000 83 dB(A) 39 (1,104) 3/8 (10) 3/8" NPT 3/8"-24 Male 3.9 (1.8) 14-1/4 (362) 4-1/2 (113) Tune-Up Kit: No. 96532 (page 192)  • Additional Specifications: Air Pressure 90 PSIG (6.2 Bar)   Wheel Sold  Separately Wheel Sold  Separately  Wheel Sold  Separately  Important:  Speed of tool must not exceed maximum operating speed of accessory. Never mount bonded grinding wheels. Always wear  eye, face & body protection.   3" Diameter, Straight Line, 1 hp, 6" Extension  • Each model accepts optional 3" diameter Type 1 Wheel, with  3/8" center hole (maximum wheel width of 1/2").  • Governor-controlled motor maintains RPM under heavy load;  rear exhaust.  • Safety-lock lever is included on all models.  • Standard cushioned grip enhances  operator comfort and control.   Model 52376  12,000 RPM  Model 52377  15,000 RPM  Model 52378  18,000 RPM   Always use required wheel guard. Never remove a guard that is specified for a tool.     126 Cone or Plug Wheel Grinders Air-Powered Grinders   Clean Metal, Grind and Smooth Weld Seams, Remove Imperfections Prior to Painting   GRINDERSGRINDERS   CONE OR PLUG WHEELS  1-1/4" (32 mm) Diameter   Accessories: Page 159   Model Motor Motor Sound Maximum Air Flow Hose I.D. Size Air Inlet Spindle Weight Length Height Number hp (W) RPM Level SCFM (LPM) Inch (mm) Thread Thread Pound (kg) Inch (mm) Inch (mm)  52715 1 (744) 12,000 82 dB(A) 38 (1,076) 3/8" NPT 3/8 (10) 3/8"-24 Male 2.0 (.9) 7-3/4 (198) 1-7/8 (48) 52716 1 (744) 15,000 80 dB(A) 39 (1,104) 3/8" NPT 3/8 (10) 3/8"-24 Male 2.0 (.9) 8-7/8 (225) 1-7/8 (48) 52717 1 (744) 18,000 81 dB(A) 40 (1,133) 3/8" NPT 3/8 (10) 3/8"-24 Male 2.0 (.9) 8-7/8 (225) 1-7/8 (48) 52718 1 (744) 20,000 80 dB(A) 44 (1,256) 3/8" NPT 3/8 (10) 3/8"-24 Male 2.0 (.9) 8-7/8 (225) 1-7/8 (48) 52719 1 (744) 12,000 82 dB(A) 38 (1,076) 3/8" NPT 3/8 (10) 3/8"-24 Male 3.3 (1.5) 13-1/4 (335) 1-7/8 (48) 52720 1 (744) 15,000 80 dB(A) 39 (1,104) 3/8" NPT 3/8 (10) 3/8"-24 Male 3.3 (1.5) 14-3/8 (365) 1-7/8 (48) 52721 1 (744) 18,000 81 dB(A) 40 (1,133) 3/8" NPT 3/8 (10) 3/8"-24 Male 3.3 (1.5) 14-3/8 (365) 1-7/8 (48) 52722 1 (744) 20,000 80 dB(A) 44 (1,256) 3/8" NPT 3/8 (10) 3/8"-24 Male 3.3 (1.5) 14-3/8 (365) 1-7/8 (48) Tune-Up Kit: No. 96532 (page 192)  • Additional Specifications: Air Pressure 90 PSIG (6.2 Bar)   Straight Line, 1 hp, Rear Exhaust  • Each model accepts optional Abrasive Cone or Plug Wheel,  1-1/4" diameter.   • Governor-controlled motor maintains RPM under heavy load.  • Safety-lock lever is included on all models.  • Industrial applications in fabrication plants, welding shops, foundries, steel mills and shipyards.  Model 52715  12,000 RPM  Model 52716  15,000 RPM  Model 52717  18,000 RPM  Model 52718  20,000 RPM Straight Line, 1 hp, Rear Exhaust, 6" Extension • Each model accepts optional Abrasive Cone or Plug Wheel,  1-1/4" diameter.   • Governor-controlled motor maintains RPM under heavy load.  • Safety-lock lever is included on all models.  • Standard cushioned grip enhances operator comfort and  offers additional control.    • Industrial applications in fabrication plants, welding shops, foundries, steel mills and shipyards.  Model 52719  12,000 RPM  Model 52720  15,000 RPM  Model 52721  18,000 RPM  Model 52722  20,000 RPM   Model 52715   Model 52719   All models can be converted to 5/8"-11 thread with 53652 cone or plug adapter.   Plug Wheel Sold Separately Plug  Wheel Sold  Separately   Important:  Speed of tool must not exceed maximum operating speed of accessory. Never mount bonded grinding wheels. Always wear  eye, face & body protection.   Model 52719 Model 52719     127  Cut-Off Wheel Tools Air-Powered Cutting Tools, 3" Diameter   For Efficient Cutting of Sheet Metal, Frame Rails, Clamps, Bolts, etc.   GRINDERSGRINDERS   TYPE 1 CUT-OFF WHEELS  3" (76 mm) Diameter   Cut-Off Wheels: Page 222  •  Accessories: Page 159   3" Diameter, Right Angle, .4 hp  Model 52439  12,000 RPM  • Accepts optional 3" diameter Type 1 Cut-Off Wheels.  • Compact size is ideal for hard-to-trim areas.  • “Dual wick” lubrication system saturates gears with oil for increased performance, extended life and reduced downtime (following proper maintenance procedures).  • Safety-lock lever is included; rear exhaust.   Model 52349   3" Diameter, Straight Line, .5 hp, 20,000 RPM  • Each model accepts optional 3" diameter Type 1 Cut-Off Wheels.  • Gearless motor design for reduced maintenance and downtime.  • Safety-lock lever is included.  Model 52434  Front Exhaust  Model 52435  Rear Exhaust 3" Diameter, Straight Line, 1 hp, 6" Extension  • Each model accepts optional 3" diameter Type 1 Cut-Off Wheels.  • Gearless motor design for reduced maintenance and downtime.  • Governor-controlled motor maintains RPM under heavy load.  • Safety-lock lever is included; rear exhaust.  Model 52576  15,000 RPM  Model 52577  18,000 RPM  Model 52578  20,000 RPM   Model 52434   Model Motor Motor Sound Maximum Air Flow Hose I.D. Size Air Inlet Spindle Weight Length Height Number hp (W) RPM Level SCFM (LPM) Inch (mm) Thread Thread Pound (kg) Inch (mm) Inch (mm)  52420 .5 (373) 20,000 85 dB(A) 28 (793) 3/8 (10) 1/4" NPT 3/8"-24 Male 2.2 (1.0) 6 (152) 5-1/2 (140) 52434 .5 (373) 20,000 84 dB(A) 27 (765) 3/8 (10) 1/4" NPT 3/8"-24 Male 2.0 (0.9) 6-3/8 (162) 3-1/8 (79) 52435 .5 (373) 20,000 80 dB(A) 27 (765) 3/8 (10) 1/4" NPT 3/8"-24 Male 2.3 (1.0) 8-1/2 (216) 3-1/8 (79) 52439 .4 (306) 12,000 86 dB(A) 21 (595) 1/4 (6) 1/4" NPT 3/8"-24 Male 1.6 (0.7) 8-1/2 (216) 3-1/8 (79) 52576 1 (744) 15,000 83 dB(A) 39 (1,104) 3/8 (10) 3/8" NPT 3/8"-24 Male 4.0 (1.8) 14-7/8 (379) 3-1/8 (79) 52577 1 (744) 18,000 84 dB(A) 40 (1,133) 3/8 (10) 3/8" NPT 3/8"-24 Male 4.0 (1.8) 14-7/8 (379) 3-1/8 (79) 52578 1 (744) 20,000 88 dB(A) 44 (1,256) 3/8 (10) 3/8" NPT 3/8"-24 Male 4.0 (1.8) 14-7/8 (379) 3-1/8 (79) Tune-Up Kit: 52420, 52435 - No. 96044; 52434 - No. 95600; 52439 - No. 96179; 52576-52578 - No. 96532 (page 192)  • Air Pressure 90 PSIG (6.2 Bar)   Model 52420 Model 52576   Wheel Sold  Separately  Wheel Sold  Separately Wheel Sold  Separately Wheel Sold  Separately   Important:  Speed of tool must not exceed maximum operating speed of accessory. Never mount bonded grinding wheels. Always wear  eye, face & body protection.   Always use required wheel guard. Never remove a guard that is specified for a tool.   3" Diameter, 7º Offset, .5 hp, 20,000 RPM  Model 52420  Front Exhaust  • Accepts optional 3" diameter  Type 1 Cut-Off Wheels.  • Gearless motor design for reduced  maintenance and downtime.  • Safety-lock lever is included.     128 Cut-Off Wheel Tools Air-Powered Cutting Tools, 4" Diameter   For Efficient Cutting of Sheet Metal, Frame Rails, Clamps, Bolts, etc.   GRINDERSGRINDERS   TYPE 1 CUT-OFF WHEELS  4" (102 mm) Diameter   Cut-Off Wheels: Page 222  •  Accessories: Page 159   Model 52430   4" Diameter, Straight Line, 1 hp, Rear Exhaust  • Each model accepts optional 4" diameter Type 1 Cut-Off Wheels, with 3/8" center hole. (Wheel width of 1/32" - 1/8".)  • Governor controlled motor to maintain RPM under heavy load.  • Safety-lock lever is included.  Model 52573  15,000 RPM  Model 52574  20,000 RPM   Model 52573   4" Diameter, Straight Line, 1 hp, 6" Extension  • Each model accepts optional 4" diameter Type 1 Cut-Off Wheels.  • Governor controlled motor to maintain RPM under heavy load.  • Safety-lock lever is included; rear exhaust.  Model 52579  15,000 RPM  Model 52580  20,000 RPM   Model 52580   Model Motor Motor Sound Maximum Air Flow Hose I.D. Size Air Inlet Spindle Weight Length Height Number hp (W) RPM Level SCFM (LPM) Inch (mm) Thread Thread Pound (kg) Inch (mm) Inch (mm)  52430 .7 (522) 15,000 91 dB(A) 32 (906) 1/4 (6) 1/4" NPT 3/8"-24 Male 2.7 (1.2) 7-3/8 (187) 4-3/4 (121) 52431 .7 (522) 20,000 91 dB(A) 36 (1,020) 1/4 (6) 1/4" NPT 3/8"-24 Male 2.7 (1.2) 7-3/8 (187) 4-3/4 (121) 52573 1 (744) 15,000 83 dB(A) 39 (1,104) 3/8 (10) 3/8" NPT 3/8"-24 Male 2.5 (1.1) 9-3/8 (238) 4-1/2 (113) 52574 1 (744) 18,000 84 dB(A) 40 (1,133) 3/8 (10) 3/8" NPT 3/8"-24 Male 2.5 (1.1) 9-3/8 (238) 4-1/2 (113) 52579 1 (744) 15,000 83 dB(A) 39 (1,104) 3/8 (10) 3/8" NPT 3/8"-24 Male 4.1 (1.8) 14-7/8 (379) 4-1/2 (113) 52580 1 (744) 18,000 84 dB(A) 40 (1,133) 3/8 (10) 3/8" NPT 3/8"-24 Male 4.1 (1.8) 14-7/8 (379) 4-1/2 (113) Tune-Up Kits: .7 hp models - No. 96045; 1 hp Models - No. 96532 (page 192)  • Additional Specifications: Air Pressure 90 PSIG (6.2 Bar)   Important:  Speed of tool must not exceed maximum operating speed of accessory. Never mount bonded grinding wheels. Always wear  eye, face & body protection.   Wheel Sold Separately Wheel Sold  Separately  Wheel Sold  Separately   Dynaswivel ® air line connector is ideal for use with most air tools.  The Dynaswivel ®  improves tool  maneuverability, minimizes  operator fatigue and extends  hose life. (See page 163.)   4" Diameter, 7º Offset, .7 hp, Front Exhaust  • Each model accepts optional 4" diameter Type 1 Cut-Off Wheels.  • Gearless motor design for reduced maintenance and downtime.  • Tool handle is offset 7º for greater operator comfort.  • Safety-lock lever is included; rear exhaust.  Model 52430    15,000 RPM  Model 52431    20,000 RPM   Always use required wheel guard. Never remove a guard that is specified for a tool.     129  Vacuum Cut-Off Wheel Tools Air-Powered Cutting Tools, 3" - 5" Diameter   For Efficient Cutting With Dust and Debris Removal   GRINDERSGRINDERS   TYPE 1 / DIAMOND CUT-OFF WHEELS  3" - 5" Diameter  (76 mm - 127 mm))    Cut-Off Wheels: Page 222 •  Portable Vacuum Systems: Page 151  • Accessories: Page 159   3" Diameter, Right Angle, .4 hp, 12,000 RPM  Model 52538  Rear Exhaust  • Ideal for use with optional 3" diameter Diamond Cut-Off Wheels.  • Adjustable wheel guard has vacuum port (1" outside diameter) that diverts airborne dust and debris to optional vacuum source.  • Non-marring composite base is removable to utilize maximum blade depth of 11/16". Optional 52646 composite base is available for gel coat notching.  • “Dual wick” lubrication system saturates gears with oil for increased performance, extended life and reduced downtime.  • Safety-lock lever is included.   4-1/2" Diameter, 7° Offset, .7 hp, 20,000 RPM  Model 52436  Rear Exhaust  • Ideal for use with optional 94912 Diamond Cut-Off Wheel  (4-1/2" diameter). Diamond Cut-Off Wheels are slotted for cooler running and longer life.  • Adjustable wheel guard has vacuum port (1" outside diameter) that diverts airborne dust and debris to optional vacuum source.  • Blade depth exposure of 1-3/16".  • Tool includes cushioned, soft-grip side handle.  • Handle is offset 7° for greater operator comfort and control.    Model 52538   Wheel Sold  Separately   5" Diameter, Right Angle, 1 hp, 12,000 RPM  Model 52438  Rear Exhaust  • Ideal for use with optional 5" diameter Diamond Cut-Off Wheels.  • Adjustable wheel guard has vacuum port (1-1/4" outside diameter) that diverts airborne dust and debris to to optional vacuum source.  • Powerful, high-quality air motor is effective for cutting through metals, thick fiberglass over-wrap and fiber spray.  • Blade guide allows operator to expose up to 1-1/8" depth of  Cut-Off Wheel if required.  • Safety-lock lever is included.   Model 52438   Wheel Sold  Separately   Model 52436   Model Motor Motor Sound Maximum Air Flow Hose I.D. Size Air Inlet Spindle Weight Length Height Number hp (W) RPM Level SCFM (LPM) Inch (mm) Thread Thread Pound (kg) Inch (mm) Inch (mm)  52436 .7 (522) 20,000 92 dB(A) 32 (906) 3/8 (10) 1/4" NPT 3/8"-24 Male 2.7 (1.2) 7-3/8 (187) 5-1/4 (133) 52438 1 (746) 12,000 83 dB(A) 40 (1,138) 3/8 (10) 3/8" NPT 3/8"-24 Male 6.7 (3.0) 14-5/8 (371) 4-1/2 (114) 52538 .4 (306) 12,000 86 dB(A) 21 (595) 3/8 (10) 1/4" NPT 3/8"-24 Male 2 (.97) 8-5/8 (219) 4-3/8 (111) Tune-Up Kits: 52436 - No. 96045; 52438 - No. 96532; 52538 - No. 96179 (page 192)  • Additional Specifications: Air Pressure 90 PSIG (6.2 Bar)   Important:  Speed of tool must not exceed maximum operating speed of accessory. Never mount bonded grinding wheels. Always wear  eye, face & body protection.   Model 52436   Wheel Sold  Separately   NEW! NEW!   NEW! NEW!     Drills .................................................. 131 Stockade Filer ........................................ 135 Stockade Sander and Saw .......................... 136   Dynadie® III ............................................ 137 Router.................................................. 137 Dynascaler ............................................ 138     131  Drills Air-Powered Drills, Angle Head and Right Angle   Industrial-Quality Drills in a Variety of Configurations   THREADED DRILL BITS  & ACCESSORIES  1/4"-28 thread   Accessories: Page 159   Dynaswivel®air line connector is ideal  for use with most air tools.  The Dynaswivel ®improves  tool maneuverability, minimizes  operator fatigue and extends  hose life. (See page 163.)   Angle Head, .4 hp, Rear Exhaust  Model 53455  950 RPM  • Accepts 1/4"-28 threaded drill bits, sold separately.  • Angle height of only 1".  • Ideal tool for running optional 3M “SR Cutter,” a plastic cutting accessory (shown). This is an efficient system for seam sealant removal, with no damage to substrate.  • Standard muffler; optional safety-lock lever available.   Drill Bit  Sold Separately  Accessory  Sold Separately   Angle Height   Angle Head, .4 hp, Rear Exhaust  Model 53430  3,200 RPM  • Accepts 1/4"-28 threaded drill bits, sold separately.  • Angle height of only 1".  • External muffler design; optional safety-lock lever available.   Right Angle, .4 hp, Rear Exhaust  Model 53435  3,200 RPM  • Accepts 1/4"-28 threaded drill bits, sold separately.  • Angle height of 2-1/4".  • Standard muffler; optional safety-lock lever available.   Model 53455   Model 53455   Right: 53455 Drill powers  optional 3M “SR Cutter”  accessory for fast,  aggressive removal  of seam sealant.   Model Motor Motor Sound Maximum Air Flow Hose I.D. Size Air Inlet Spindle Weight Length Height Number hp (W) RPM Level SCFM (LPM) Inch (mm) Thread Thread Pound (kg) Inch (mm) Inch (mm)  53430 .4 (298) 3,200 83 dB(A) 23 (650) 1/4 (6) 1/4" NPT 1/4"-28 Female 1.9 (.9) 11-3/8 (289) 1-5/8 (40) 53435 .4 (298) 3,200 80 dB(A) 21 (595) 1/4 (6) 1/4" NPT 1/4"-28 Female 1.9 (.9) 7 (178) 2-1/4 (57) 53455 .4 (298) 950 82 dB(A) 23 (663) 1/4 (6) 1/4" NPT 1/4"-28 Female 2.1 (.9) 11-1/8 (282) 2-3/4 (70) Tune-Up Kits: 53430 and 53455 - No. 96333; 53435 - No. 96179 (page 192)  • Additional Specifications:  Air Pressure 90 PSIG (6.2 Bar)   SR Cutter is registered trademark of 3M Company.   Motor Tune-Up Kits will extend the life of an air tool when used with  a preventative maintenance schedule.  DRILLS AND SPECIALTY TOOLSDRILLS AND SPECIALTY TOOLS   Model 53430   53435 53435 Model 53435   1"   Angle Height   1"   Angle Height   2-1/4"     132 Drills Air-Powered Drills, 1/4" Chuck   Industrial-Quality Drills in a Variety of Configurations   DRILL BITS  & ACCESSORIES  1/4" (6 mm) dia. maximum   Accessories: Page 159   Motor Tune-Up Kits will extend the life of an air tool when used  as part of a preventative maintenance schedule. (See page 192.)   Straight Line, .4 hp, Rear Exhaust  • Each model includes 1/4" drill chuck and key.  • Extended muffler design for reduced sound levels.  Model 53077  950 RPM  Model 53078  3,200 RPM  Model 53079  5,000 RPM   Model 53077   13141   Handle/Collar Assembly Sold Separately   7° Offset, .4 hp, Rear Exhaust  • Each model includes 1/4" drill chuck and key.  • Extended muffler design for reduced sound levels.  Model 53072  950 RPM  Model 53073  3,200 RPM  Model 53074  5,000 RPM Right Angle, .4 hp, Front Exhaust  • Each model includes 1/4" drill chuck  and key.  Model 51846  12,000 RPM  Model 51847  15,000 RPM  Model 51848  20,000 RPM Straight Line, .5 hp, Front Exhaust  Model 53037  20,000 RPM  • Includes 1/4" drill chuck and key.   Right Angle, .4 hp, Rear Exhaust  • Each model includes 1/4" chuck and key.  • Standard muffler design.  Model 53046  12,000 RPM  Model 53047  15,000 RPM  Model 53048  20,000 RPM   Model 53046 Model 53037   Model Motor Motor Sound Maximum Air Flow Hose I.D. Size Air Inlet Spindle Weight Length Height Number hp (W) RPM Level SCFM (LPM) Inch (mm) Thread Thread Pound (kg) Inch (mm) Inch (mm)  51846 .4 (298) 12,000 85 dB(A) 21 (595) 1/4 (6) 1/4" NPT 3/8"-24 Male 1.1 (0.5) 5-1/2 (140) 4 (101) 51847 .4 (298) 15,000 84 dB(A) 21 (595) 1/4 (6) 1/4" NPT 3/8"-24 Male 1.1 (0.5) 5-1/2 (140) 4 (101) 51848 .4 (298) 20,000 89 dB(A) 21 (595) 1/4 (6) 1/4" NPT 3/8"-24 Male 1.1 (0.5) 5-1/2 (140) 4 (101) 53037 .5 (373) 20,000 87 dB(A) 27 (765) 3/8 (10) 1/4" NPT 3/8"-24 Male 1.5 (.7) 7 (178) 1-3/4 (44) 53046 .4 (298) 12,000 86 dB(A) 21 (595) 1/4 (6) 1/4" NPT 3/8"-24 Male 1.1 (.5) 5-3/4 (146) 4 (101) 53047 .4 (298) 15,000 86 dB(A) 21 (595) 1/4 (6) 1/4" NPT 3/8"-24 Male 1.1 (.5) 5-3/4 (146) 4 (101) 53048 .4 (298) 20,000 87 dB(A) 21 (595) 1/4 (6) 1/4" NPT 3/8"-24 Male 1.1 (.5) 5-3/4 (146) 4 (101) 53072 .4 (298) 950 79 dB(A) 22 (623) 1/4 (6) 1/4" NPT 3/8"-24 Male 2.2 (1.0) 8 (203) 6-3/4 (171) 53073 .4 (298) 3,200 80 dB(A) 22 (623) 1/4 (6) 1/4" NPT 3/8"-24 Male 2.1 (0.9) 8 (203) 5-1/2 (141) 53074 .4 (298) 5,000 78 dB(A) 22 (623) 1/4 (6) 1/4" NPT 3/8"-24 Male 2.1 (0.9) 8 (203) 5-1/2 (141) 53077 .4 (298) 950 82 dB(A) 22 (623) 1/4 (6) 1/4" NPT 3/8"-24 Male 1.8 (.8) 10-1/2 (267) 1-5/8 (40) 53078 .4 (298) 3,200 81 dB(A) 22 (623) 1/4 (6) 1/4" NPT 3/8"-24 Male 1.8 (.8) 10-1/2 (267) 1-5/8 (40) 53079 .4 (298) 5,000 84 dB(A) 22 (623) 1/4 (6) 1/4" NPT 3/8"-24 Male 1.8 (.8) 10-1/2 (267) 1-5/8 (40) Tune-Up Kits: 51846-51848, 53046-53048 - No. 96179; 53037 - No. 95600; 53072-53074 - No. 96174; 53077-53079 - No. 96173 (page 192) Additional Specifications:  Air Pressure 90 PSIG (6.2 Bar)   DRILLS AND SPECIALTY TOOLSDRILLS AND SPECIALTY TOOLS   Model 53072     133   Industrial-Quality Drills in a Variety of Configurations   DRILL BITS  & ACCESSORIES  3/8" (10 mm) dia. maximum   Accessories: Page 159   Drills Air-Powered Drills, 3/8" Chuck   Dynaswivel ® air line connector is ideal  for use with most air tools.  The Dynaswivel   ® improves  tool maneuverability, minimizes  operator fatigue and extends  hose life. (See page 163.)   Pistol Grip, .7 hp, Rear Exhaust  • Each model includes 3/8" drill chuck and key.  • High-torque air motor; slow-speed startup trigger.  • Rubber insulated grip and removable side handle.  Model 53091  950 RPM  Model 53060  3,400 RPM  Model 53095  4,500 RPM  Model 53096  20,000 RPM   Accessory  Sold Separately   Model 53096   7° Offset .4 hp, Rear Exhaust,  Self-Generated Vacuum   • Each model includes 3/8" drill chuck and key.  • Self-generated vacuum tool includes 50682 exhaust hose  (6' long) and 50683 reusable cloth bag. As tool is run, dust  and debris are diverted through hose and into bag.  • Vacuum shroud retracts to allow full view of work surface.  • Convenient trigger mechanism allows easy one-hand  operation of drill.  • Ideal for rivet work, aluminum and aviation applications.  Model 53200  3,200 RPM  Model 53210  5,000 RPM   Model 53200  Includes 50683 Cloth Bag and  50682 hose (1" dia., 6' long)   Motor Tune-Up Kits will extend the  life of an air tool when used as part  of a preventative maintenance schedule. (See page 192.)   Trigger mechanism allows one-hand operation of drill.   Model Motor Motor Sound Maximum Air Flow Hose I.D. Size Air Inlet Spindle Weight Length Height Number hp (W) RPM Level SCFM (LPM) Inch (mm) Thread Thread Pound (kg) Inch (mm) Inch (mm)  53060 .7 (522) 3,400 84 dB(A) 33 (935) 3/8 (10) 1/4" NPT 1/2"-20 Male 3.2 (1.4) 8-7/8 (224) 6-3/8 (163) 53091 .7 (522) 950 82 dB(A) 33 (935) 3/8 (10) 1/4" NPT 1/2"-20 Male 3.9 (1.8) 10-1/2 (267) 6-3/8 (163) 53095 .7 (522) 4,500 85 dB(A) 33 (935) 3/8 (10) 1/4" NPT 1/2"-20 Male 3.2 (1.4) 8-7/8 (224) 6-3/8 (163) 53096 .7 (522) 20,000 88 dB(A) 33 (935) 3/8 (10) 1/4" NPT 3/8"-24 Male 2.4 (1.1) 7 (180) 6-3/8 (163) 53200 .4 (298) 3,200 86 dB(A) 24 (680) 1/4 (6) 1/4" NPT 3/8"-24 Male 3.2 (1.45) 10-1/2 (267) 10 (254) 53210 .4 (298) 5,000 86 dB(A) 24 (680) 1/4 (6) 1/4" NPT 3/8"-24 Male 3.2 (1.45) 10-1/2 (267) 10 (254) Tune-Up Kits: 53060, 53091, 53095, 53096: No. 96047; 53200, 53210: No. 96174 (page 192)  • Additional Specifications:  Air Pressure 90 PSIG (6.2 Bar)   DRILLS AND SPECIALTY TOOLSDRILLS AND SPECIALTY TOOLS     134   Industrial-Quality Drills in a Variety of Configurations   DRILL BITS  & ACCESSORIES  1/2" (13 mm) dia. maximum   Accessories: Page 159   Drills Air-Powered Drills, 1/2" Chuck  7° Offset, .7 hp, Rear Exhaust  • Each model includes 1/2" drill chuck and key.  • Also includes removable side handle and  safety-lock lever.  Model 53080  3,400 RPM  Model 53081  4,500 RPM  Model 53080   For best tool performance, use optional 95676 Coupler/Plug Assembly (see page 161).   Pistol Grip, .7 hp, Rear Exhaust  Model 53090  950 RPM  • Includes 1/2" drill chuck and key.  • High-torque air motor; slow-speed startup trigger.  • Rubber insulated grip and removable side handle.   Hole Saw Model Right Angle, 1 hp, Rear Exhaust  Model 53143  850 RPM  • Includes 1/2" drill chuck and key.  • High torque, governor-controlled air motor.  • Ideal for running optional diamond hole saws, to efficiently punch out holes in dashboard templates,  and to create other openings.  • Side handle is reversible for left or right hand use.   • Safety-lock lever is included.    Model 53143   Accessory  Sold Separately   Model Motor Motor Sound Maximum Air Flow Hose I.D. Size Air Inlet Spindle Weight Length Height Number hp (W) RPM Level SCFM (LPM) Inch (mm) Thread Thread Pound (kg) Inch (mm) Inch (mm)  53080 .7 (522) 3,400 82 dB(A) 46 (1,303) 3/8 (10) 1/4" NPT 1/2"-20 Male 4.9 (2.2) 10-3/4 (274) 7-3/4 (196) 53081 .7 (522) 4,500 82 dB(A) 46 (1,303) 3/8 (10) 1/4" NPT 1/2"-20 Male 4.9 (2.2) 10-3/4 (274) 7-3/4 (196) 53090 .7 (522) 950 84 dB(A) 33 (935) 3/8 (10) 1/4" NPT 1/2"-20 Male 4.8 (2.1) 10-1/2 (267) 6-3/8 (163) 53143 1 (744) 850 83 dB(A) 35 (991) 3/8 (10) 3/8" NPT 1/4"-20 Male 5.5 (2.5) 13-1/8 (333) 5-1/8 (130) Tune-Up Kits: 53080, 53081 - No. 96234; 53090 - No. 96047; 53143 - No. 96532 (page 192)  • Additional Specifications:  Air Pressure 90 PSIG (6.2 Bar)   DRILLS AND SPECIALTY TOOLSDRILLS AND SPECIALTY TOOLS   Model 53090     135   FILES  1/4" (6 mm) dia. shank   Reciprocating Files: Page 223  • Accessories: Page 159   Ideal for Countless Filing Applications   Stockade Filer Kit  Model 12202   • Kit includes 12201 Stockade Filer (with 12197  File Adapter), three files (90980, 90982, 90984)  and 90977 Grit-File Abrasive Kit (see below). 12202 Kit    Model 12200 12201   File Sold Separately   Straight Line, .4 hp, Rear Exhaust  • Each model has 1/4" round file holder opening  for accepting optional files with 1/4" diameter  shank (see below).  • Tool includes safety-lock lever.  • Also includes built-in air flow regulator.  Model 12200  3,400 Strokes/Minute  Model 12201  3,400 Strokes/Minute  • Comes with 12197 File Adapter, for mounting Dynabrade files 6" in length.   Dynabrade Files (6" Length)  •  Sold Separately   Model Motor Sound Maximum Air Flow Stroke Strokes Hose I.D. Size Air Inlet Weight Length Height Number HP (W) Level SCFM (LPM) Inch (mm) per Minute Inch (mm) Thread Pound (kg) Inch (mm) Inch (mm)  12200 .4 (298) 89 dB(A) 21 (595) 13/32 (10) 2,400 3/8 (10) 1/4" NPT 2.4 (1.1) 10- (254) 1-1/2 (38) 12201 .4 (298) 89 dB(A) 21 (595) 13/32 (10) 2,400 3/8 (10) 1/4" NPT 2.4 (1.1) 10- (254) 1-1/2 (38) Tune Up Kit: No. 96261 (page 192) • Additional Specifications:  Air Pressure 90 PSIG (6.2 Bar)   90977 Grit-File Abrasive Kit   • 40 abrasive strips (1/4" and 1/2" wide) which mount to spring-steel extenders, to reach areas as small as 1/8".    • 80 and 180 grit strips are included, with 4-1/2" and 6" long extenders.    • Sponge-base and cork-base Dynapad ® platens,  which mount to extenders to support abrasive strips.   90977 Kit    Model 12200   Part  Name Shape Shank CutNumber  90980 Pillar 5/32" (4 mm) x 7/16" (11 mm)  “00” Very Coarse 90981 Half Round 5/32" (4 mm) x 7/16" (11 mm) “00” Very Coarse 90982 Round 1/4" (6 mm) Dia. “00” Very Coarse 90983 Triangular 5/32 (4 mm)" x 1/2" “00” Very Coarse 90984 Square 1/4" (6 mm) Dia. “00” Very Coarse 90985 Pillar 5/32" (4 mm) x 7/16" (11 mm) “0” Coarse 90986 Half Round 5/32" (4 mm) x 7/16" (11 mm) “0” Coarse 90988 Triangular 5/32" (4 mm) x 1/2" (10 mm) “0” Coarse 90989 Square 1/4" (6 mm) Dia. “0” Coarse 90905 Foundry 1/4" (6 mm) Dia. to 1/8" (3 mm) “00” Very Coarse Tapered   12197  12197  90980 90982 90984  Round File Holder Opening: 6.3 mm center dia. x 13 mm width (approx. 1/4" x 1/2")   Stockade Filer Air-Powered Reciprocating Filer   DRILLS AND SPECIALTY TOOLSDRILLS AND SPECIALTY TOOLS     136 Stockade Sander and Saw Air-Powered Reciprocating Sander and Saw   Ideal for Countless Sanding and Sawing Applications   ABRASIVE STRIPS,  SAW BLADES  See below   Reciprocating Saw Blades: Page 223  • Accessories: Page 159   Model 12204  Stockade Sander  • Has 5" long x 1/2" wide spring-steel extender which accepts stick-on coated abrasive strips (sold separately).    • 80 and 180 grit abrasive strips are included.  • Three platen pads are included, which may be mounted to the extender as a backing for the abrasive strip.   • Safety-lock lever is standard; rear exhaust. Model 12204   Model 12204   Model 12205  Stockade Saw  • Tool includes 12212 Saw Holder Adapter, 12183  Saw Guide, 90935 General Purpose Saw Blade.    • Built-in air flow regulator.  • Countless applications on wood, metal, composites, fiberglass and more.  • Safety-lock lever is standard; rear exhaust.   Model 12206  Stockade Saw Kit  • 12205 Stockade Saw (above) and 90933  Saw Blade Pack, which includes one of each blade shown at right (six total).  • Saw Blades have  a variety of uses  on metal,  fiberglass,  wood and  more.   Model 12205   Part  Blade Type Description ShapeNumber  90934 Metal/Fiberglass Cutting Silver • Long Life • Bi-Metal 90935 Metal Cutting White • Long Life • Bi-Metal 90936 Metal Cutting White • Long Life • Bi-Metal 90937 Metal Cutting White • Long Life • Bi-Metal 90938 Metal Scroll Heavy Duty White •  Long Life • Bi-Metal 90939 Wood Cutting/Stiff Back White • Bi-Metal   Dynabrade Saw Blades  •  Sold Separately   12206 Kit   Model Motor Sound Maximum Air Flow Hose I.D. Size Air Inlet Strokes Strokes Weight Length Height Number HP (W) Level SCFM (LPM) Inch (mm) Thread Inch (mm) per Minute Pound (kg) Inch (mm) Inch (mm)  12204 .4 (298) 89 dB(A) 21 (595) 1/4 (6) 1/4" NPT 13/32 (10) 2,400 2.4 (1.1) 10 (254) 1-1/2 (38) 12205 .4 (298) 89 dB(A) 21 (595) 3/8 (10) 1/4" NPT 13/32 (10) 2,400 2.4 (1.1) 10 (254) 1-1/2 (38) Tune-Up Kit: No. 96261 (page 192)  • Additional Specifications:  Air Pressure 90 PSIG (6.2 Bar)   Model 12207  Stockade Filer/Saw Kit  • 12205 Stockade Saw (see above).    • Three adapters: 12197 for Dynabrade 6" long files;  12211 for foundry file; 12212 for saw blades.  • 12183 Saw Guard Assembly (must be used with saw blades).  • Two 6" long files (90980 Pillar; 90983 Triangular).  • One 5-1/2" long foundry file (90905).  • Two saw blades (90934, 90935).   12207 Kit   DRILLS AND SPECIALTY TOOLSDRILLS AND SPECIALTY TOOLS     137   Router Air-Powered Routing Tool   Ideal for Countless Routing Applications   ROUTER BITS  1/8" (3 mm) and 1/4" (6 mm) diameter shanks   Reciprocating Files: Page 223  • Accessories: Page 159   Motor Tune-Up Kits will extend the life of an air tool when used with a preventative maintenance schedule.   Router Bit  Sold Separately   Model 51330  20,000 RPM, .7 hp, Front Exhaust  • Ideal for chamfers and roundover cuts on hardwoods,  softwoods, solid surfaces or plastics. Great for laminate  trimming, surface planing, beveling and cornering.  • Tool accepts optional high-speed steel router bits with  1/4" diameter shank capacity. Also accepts optional 1/8"  collet insert, for mounting 1/8" diameter router bits.  • Lightweight, non-marring composite fixed base allows  for 90° cuts. Base offers easy height adjustment.  • Safety-lock lever is standard.  • Front exhaust directs chips away from cutter.  • Spindle lock allows one-wrench cutter changing.  • Includes guide rails, ideal for use on glue seams.  Model 51331  Router Kit  • Includes 51330 Router with 93388 six-piece router bit set.   Model 51330   Model Motor Motor Sound Maximum Air Flow Hose I.D. Size Air Inlet Spindle Weight Base Size Height Number hp (W) RPM Level SCFM (LPM) Inch (mm) Thread Thread Pound (kg) Inch (mm) Inch (mm)  51330 .7 (522) 20,000 85 dB(A) 34 (963) 3/8 (10) 1/4" NPT 3/8"-24 Male 2.5 (1.1) 3-1/4 (83) x 3-1/2 (89) 8-1/4 (210) Tune-Up Kit: 96529(page 192)  • Additional Specifications:  Air Pressure 90 PSIG (6.2 Bar)   • Collet Depth 1-5/8" (41 mm)   • Max. Cutter Dia. 1-1/8" (29 mm)   Model 51330   Dynadie ®III Air-Powered Reciprocating Filer   Reciprocating Filer for Precise Filing and Finishing   SHANKED FILES  1/8" (3 mm) and 1/4" (6 mm) diameters   File Sold  Separately   Model 12250  Variable-Length Stroke  • Accepts 1/4" dia. or 1/8" diameter shanked files.  Files sold separately.  • Replaces tedious hand filing. Easily enters narrow slots.  • Use on metal, wood, plastic, fiberglass, etc.  • Variable-length stroke from 0-1/4". Tool runs  at 5,000 strokes per minute.  • Barrel indexes 360° for ideal comfort.  • Tool includes 94407 Flow-Control Dynaswivel® (not shown).   Model 12250   Model 12250   Model Motor Sound Air Flow Rate Stroke Strokes Hose I.D. Size Air Inlet Weight Length Height Number hp (W) Level SCFM  (LPM) Inch (mm) Per Minute Inch (mm) Thread Pound (kg) Inch (mm) Inch (mm)  12250 .2 (142) 77 dB(A) 18 (509) 0 - 1/4 (6) 5,000 3/8 (10) 1/4" NPT 1.8 (.82) 6-5/8 (170) 4-1/8 (106) Tune-Up Kit: No. 96533 (page 192)  • Additional Specifications:  Air Pressure 90 PSIG (6.2 Bar)   Swiss Pattern Files • 3-1/2"- 4" Lengths; 1/8" Dia. Shank  Part Number Name Shape Shank Cut  90982 Round 1/4" (6 mm) Dia. “00” Very Coarse 90984 Square 1/4" (6 mm) Dia. “00” Very Coarse 90989 Square 1/4" (6 mm) Dia. “0” Coarse   Three Half  File/Cut Equaling Square Square Round Crochet Round   Straight File Medium Cut 1 90900 90910 90920 90930 90940 90950 Curved File Fine Cut 2 90901 90911 90921 90931 90941 90951   Files • 6" Length; 1/4" Dia. Shank    DRILLS AND SPECIALTY TOOLSDRILLS AND SPECIALTY TOOLS   Model 12250     138   Dynascaler Flaps & Hubs: Page 221  • Accessories: Page 159   3M ROTO PEEN ®  “Bonded Shot”  Flap Assemblies Dynascaler Air-Powered Descaling and Surface Preparation Tool   For Heavy-Duty Industrial, Marine, Construction Applications   Model 30303  Model 30200   Roto-Peen ®  Sold Separately   Roto-Peen is registered trademark of 3M Company.   • All models use optional 3M Roto Peen ® “bonded shot”  flap assemblies.  • Ideal for removing rust, oxide, scale, old paint and tough  coatings from most surfaces.   Hand-Held Models  • Steel dowel pin (keepers) system allows easy flap  loading and unloading.  • Four-position top handle adjusts for operator comfort.  Model 30304  Straight Line  • For 2" wide work on inside of pipe.  • Six-slot hub (2-1/4" wide) accepts optional 3M Roto Peen ®.  Adjustable for exact positioning of Roto Peen ® to surface.  Model 30336  Straight Line      Model 30337  Right Angle  • Each model is for 2" wide work on flat surfaces.  • Ideal for removal of floor paint/coatings and for  scarifying concrete.   • Vacuum port accepts 1-1/2" diameter cuff.   Floor Models  Model 30303  2" Wide      Model 31600  3" Wide  • Each model has 20-slot hub  for optional 3M Roto Peen ®.  • Adjustable edge guide assures  straight-line descaling. (Not  recommended for use  without edge guide.)   Over-Under Model  Model 30200  1" Wide Top and Bottom  • Mechanically fractures scale and coatings, with negligible removal of base metal.  • “Over-under” simultaneous removal of scale, from top and bottom of girder  webplates prior to welding.  • Top and bottom unit each use optional 1" wide 3M Roto Peen ® “bonded shot”  flap assemblies. Top unit easily detaches to permit portable “touch up” descaling.   Model 30304   DRILLS AND SPECIALTY TOOLSDRILLS AND SPECIALTY TOOLS   Model 30336 Model 30336   Model Motor Motor Sound Maximum Air Flow Hose I.D. Size Air Inlet Spindle Weight Length Height Number hp (W) RPM Level SCFM (LPM) Inch (mm) Thread Thread Pound (kg) Inch (mm) Inch (mm)  30303 1.7 (1,268) 1,650 94 dB(A) 78 (2,209) 1/2 (13) 3/8" NPT – 44.2 (20) 8-3/4 (222) 11 (279) 31600 .4 (2,983) 1,650 94 dB(A) 127 (3,597) 1/2 (13) 3/8" NPT – 54 (24.5) 8-3/4 (222) 11 (279) 30200 .7 (522) 2,100 94 dB(A) 38 (1,076) 1/2 (13) 3/8" NPT – 33.2 (15) 14 (355) 10-3/4 (273)  30304 .7 (522) 2,400 94 dB(A) 38 (1,076) 1/2 (13) 3/8" NPT 1/2"-20 Male 6.2 (2.8) 11-3/4 (298) 8-1/4 (210) 30336 .7 (522) 2,400 94 dB(A) 38 (1,076) 1/2 (13) 3/8" NPT 1/2"-20 Male 6.5 (2.9) 11-3/4 (298) 8-1/4 (210) 30337 .7 (522) 1,950 94 dB(A) 38 (1,076) 1/2 (13) 3/8" NPT 1/2"-20 Male 6.5 (2.9) 11-3/4 (298) 8-1/4 (210) Additional Specifications:  Air Pressure 90 PSIG (6.2 Bar)     Versatility Grinders .................................. 140 Tool Post Grinders .................................. 145  Bandsaw Blade Grinder ............................ 148 Wet Deburring Station .............................. 149     140   STATIONARY MACHINESSTATIONARY MACHINES  Versatility Grinder Electric Abrasive Belt Machine   Ideal for an Extensive Variety of Finishing Applications   ABRASIVE BELTS  1/4-2" wide x 72" long (6 mm - 51 mm x 1,829 mm)   Contact Arms: Page 142  •  Accessories: Page 141   Model 64900   “Pivot mount” assembly allows operator to adjust Contact Arm to any angle for peak efficiency.   • Versatility Grinder powers 72" abrasive belts in widths from  1/4" to 2", to provide a wide variety of finishing solutions.   • Ideal for use on castings and forgings, turbine blades, medical implants, investment castings and more.  • Sleek, compact design for easy space-saving set up.  • Combines linear tracking adjustment with conventional pivot tracking, for optimum belt tracking control.  • Adjustable air belt tensioning; pivoting arm assembly.   • Includes efficient through-housing vacuum port (see page 141 for optional Vacuum Scoop Assembly).   Variable Speed Models  • Design allows change of belt direction from forward to reverse.  Model 64900  600 - 4,000 SFPM, 115 V (AC)  Model 64901  600 - 4,000 SFPM, 230 V (AC)   Model 64902  2,000 - 8,000 SFPM, 230 V (AC)   Model 64903  2,000 - 8,000 SFPM, 460 V (AC) Fixed Speed Models  Model 64904  5,400 SFPM, 115 V (AC)  Model 64905  5,400 SFPM, 230 V (AC) Variable Speed Model • Design allows change of belt direction from forward to reverse.  Model 64881  600 - 4,000 SFPM, 230 V (AC)  • This model carries the CE (European Conformity) mark,  signifying that it complies with all essential requirements  of relevant European health, safety and environmental  protection legislation.  • Shown with optional Vacuum Scoop Assembly (see page 141).   Model 64881   M odel Motor Abrasive Belt Size Max. SFPM Weight Length Height  Number hp (W) Inch (mm) (SMPM) Voltage Phase Frequency Pound (kg) Inch (mm) Inch (mm)  64881 1 (744) 1/4-2 (6-51) x 72 (1,829) 600-4,000 (183-1,219) 230 1 50 Hz 120 (55) 33 (838) 22 (559) 64900 1 (744) 1/4-2 (6-51) x 72 (1,829) 600-4,000 (183-1,219) 115 1 50/60 Hz 120 (55) 33 (838) 22 (559) 64901 1 (744) 1/4-2 (6-51) x 72 (1,829) 600-4,000 (183-1,219) 230 1 50/60 Hz 120 (55) 33 (838) 22 (559) 64902 3 (2,232) 1/4-2 (6-51) x 72 (1,829) 2,000-8,000 (510-2,440) 230 3 50/60 Hz 120 (55) 33 (838) 22 (559) 64903 3 (2,232) 1/4-2 (6-51) x 72 (1,829) 2,000-8,000 (510-2,440) 460 3 50/60 Hz 120 (55) 33 (838) 22 (559) 64904 1.5 (1,116) 1/4-2 (6-51) x 72 (1,829) 5,400 (1,647) 115 1 50/60 Hz 120 (55) 33 (838) 22 (559) 64905 1.5 (1,116) 1/4-2 (6-51) x 72 (1,829) 5,400 (1,647) 230 1 50/60 Hz 120 (55) 33 (838) 22 (559)   230 V (AC)  115 V (AC)     141   M odel Motor Abrasive Belt Size Max. SFPM Weight Length Height  Number hp (W) Inch (mm) (SMPM) Voltage Phase Frequency Pound (kg) Inch (mm) Inch (mm)  64860 1 (744) 2 (51) x 72 (1,829) 600-4,000 (183-1,219) 115 1 50/60 Hz 120 (55) 33 (838) 22 (559) 64861 1 (744) 2 (51) x 72 (1,829) 600-4,000 (183-1,219) 230 1 50/60 Hz 120 (55) 33 (838) 22 (559) 64862 3 (2,237) 2 (51) x 72 (1,829) 2,000-8,000 (610-2,438) 230 3 50/60 Hz 120 (55) 33 (838) 22 (559) 64863 3 (2,237) 2 (51) x 72 (1,829) 2,000-8,000 (610-2,438) 460 3 50/60 Hz 120 (55) 33 (838) 22 (559)   STATIONARY MACHINESSTATIONARY MACHINES   Contact Arms: Page 142   •  Abrasive Belts: Page 211   Versatility Grinder Electric Abrasive Belt Machine   Versatility Grinder Accessories   Ideal for an Extensive Variety of Finishing Applications   ABRASIVE BELTS  2" wide x 72" long (51 mm x 1,829 mm)   Model 64860 “Slack Action,” Variable Speed Model  • Machine offers simplified design that eliminates belt tension rollers to reduce maintenance costs.   • Design also allows greater use of abrasive belt slack areas. Operator has flexibility to finish workpiece on belt slack in a variety of positions, for optimum efficiency.   • Grind on Contact Wheel for fast material removal, then polish with slack of belt.      • Ideal for use on castings and forgings, turbine blades, medical implants, golf club parts, piping, investment castings and more.  • Linear belt tracking adjustment works with conventional tracking system for superior abrasive belt control.  • Heavy-duty 2" x 2" Contact Arm (67215) included.  Model 64860  600 - 4,000 SFPM, 115 V (AC), 1 hp  Model 64861   600 - 4,000 SFPM, 230 V (AC), 1 hp  Model 64862  2,000 - 8,000 SFPM, 230 V (AC), 3 hp  Model 64863  2,000 - 8,000 SFPM, 460 V (AC), 3 hp  3 hp Electric Motor Variable Speed 64874  • 3 hp (2,237 W), 230 Volt, 3 Phase, 50/60 Hz  64875  • 3 hp (2,237 W), 460 Volt, 3 Phase, 50/60 Hz   1 hp Electric Motor Variable Speed  64870  • 1 hp (746 W), 115 Volt, 1 Phase, 50/60 Hz  64871  • 1 hp (746 W), 230 Volt, 1 Phase, 50/60 Hz   1.5 HP Electric Motor Fixed Speed  64872  • 1.5 hp (1,119 W), 115 Volt, 1 Phase, 50/60 Hz  64873  • 1.5 hp (1,119 W), 230 Volt, 1 Phase, 50/60 Hz   Pedestal Assembly  64895  • For easy positioning of machine. Frees up additional work space.   Platen Assembly  64962  • Ideal for platen grinding.   Vacuum Scoop Assembly  64932  • Attaches to “thru-housing” vacuum port, for efficient collection of sanding debris.   Vacuum Adapter  64923  • For connection to 2-1/2" (63mm) dia. vacuum hose.   115 V (AC)     142   STATIONARY MACHINESSTATIONARY MACHINES  Versatility Grinder Contact Arms   Part Number Comments Belt Size Contact Wheel Assembly  Platen Pad (includes bearing and shaft)  11200 • Work on broad areas 1/2" x 72" 11088 11025 • Leave in-line scratch 5/8" dia. x 3/8" wide, rubber 1/2" wide • Blend spot welds 11201 • Enter channels as small as 7/16" 1/2" x 72" 11068 11027 5/16" dia. x 3/8" wide, steel 1/2" wide 11202 • Enter 5/16" x 3/4" openings 1/4" x 72" 11074 11032 5/8" dia. x 1/8" wide, rubber 1/4" wide 11203 • Grind over contact wheel or platen  1/2" x 72"  11078 11025 • Order 11312 for heavy-duty, or 5/8" dia. x 3/8" wide, rubber 1/2" wide 11325 for steel platen version 11204 • Unique offset design 1/8", 1/4",  11080 None • Strap polishing is easy with  5/16" or 1" dia. x  3/8" wide, this arm 1/2" x 72"  radiused rubber 11206 • Order 11326 for heavy-duty steel  5/8" or 11282 11109 construction version  3/4" x 72"  3/4" dia. x 5/8" wide, rubber 3/4" wide 11220, 11300, 11301, 11341 • Offset design and miniature  11220: 11220: 11352  None contact wheels  5/8" or  5/16" x 5/8" wide, steel • 2" strap polish in offset 3/4" x 72"  area; polish turbine blades and  All Others: 11300: 11332 None other contours  1/2" x 72" 1/4" x 3/8" wide, steel 11301: 11068 None 5/16" x 3/8" wide, steel 11341: 11342 None 5/16" x 3/8" wide, rubber 11280 • Grind corners, enter grooves,  1/8" or  11086 None strap polish 1/4" x 72" 1" dia. x 3/8" wide, • “V” shape wheel urethane, tapered 11286 • 11024 Steel Platen available 1/2" x 78" 11078 11025 • 6-3/4" workable reach 5/8" dia. x 3/8" wide 1/2" wide 11287 • Grind on wheel or platen  5/8"or  11282 11109 • 5-1/4" reach  3/4" x 74-1/2" 3/4" x 5/8" wide, rubber 3/4" wide 11314 • File round openings as small 1/4" x 72" 11066 11034 as 7/16" 5/16" dia. x 1/8" wide, steel 1/4" wide 11320 • For flat grinding using platen at  1/2" x 72"  5/8" dia. x 3/8" wide, rubber 11026 Offset or near  corners and edges of  1/2" wide Arm large radius round • Contact wheel is offset to  prevent gouging 11321 • Work on contact wheel  1/2" x 72"  11070 11025 or platen pad 7/16" dia. x 3/8" wide, rubber 1/2" wide 11322 • Guide-cut 1/2" x 72"  11090 None • Removes raised material within 60 to 80 grit 5/8" dia. x 3/8" wide, rubber .020" or less without undercutting 11329 • Extra length arm 1/2" x 98"  11078 11025 • 17" workable reach 5/8" dia. x 3/8" wide, rubber 1/2" wide 11330 • Enter 1/2" x 1/2" openings 1/4" x 72"  11072 11034 7/16" dia. x 1/8" wide, brass 1/4" wide 11337 • Enter channels as narrow as 9/16" 1/2" x 72"  11076 11027 7/16" dia. x 3/8" wide, steel 1/2" wide     143   STATIONARY MACHINESSTATIONARY MACHINES  Versatility Grinder Contact Arms   Part Number Comments Belt Size Contact Wheel Assembly  Platen Pad (includes bearing and shaft)  11350 • 45 PSIG maximum 3/4" x 88" 11352 Optional • Excellent for cleaning oxide off  5/16" dia. x 5/8" wide, steel 3/4" wide electrical bus bars • Arm has a 12" workable reach 11360 • Unique offset design 1/2" x 72" 11078 None • Grind over contact wheels or  5/8" dia. x 3/8" wide, rubber strap polish 15321 • For flat grinding using platen pad 1" x 72"  15320 15323 3/4" dia. x 7/8" wide 1" wide 15326 • Allows for longer reach 1" x 78"  15320 15323 • Grind using platen pad 3/4" dia. x 7/8" wide 1" wide 15375 • Great for strap polishing 1" x 78"  15348 None 70 durometer 2" dia. x 1" wide, rubber 65133 • Wide width for tight  1" x 72"  65135 None radius finishing 70 durometer, flat 5/8" dia. x 1" wide, urethane 65182 • 3/8" (10 mm) wide radius 1/4" to  11080 None wheel for blending 1/2" x 72" 70 durometer, radiused 1" dia. x 3/8" wide, urethane 67058 • Offset design for strap 1/2" x 72" 11070 None finishing 70 durometer 7/16" dia. x 1/2" wide, rubber 67200, 67201, 67202, 67203 • Excellent for finishing 67200 11650 None shoulder areas as well as 1" x 72" 70 durometer, serrated contact wheel grinding 2" dia. x 1" wide, urethane 67201 67045 None 3/4" x 72" 70 durometer, serrated 2" dia. x 3/4" wide, urethane 67202 67044 None 5/8" x 72" 70 durometer, serrated 2" dia. x 5/8" wide, urethane 67203 67043 None 1/2" x 72" 70 durometer, serrated 2" dia. x 1/2" wide, urethane 67204 • Unique split wheel design allows  1-1/2" x 72"  67181 None operator to grind up against 70 durometer, serrated work area shoulders without arm 2" dia., split wheel, urethane interference 2 Required 67205 • Unique split wheel design allows  1-1/2" x 72" 67180 None operator to grind up against 70 durometer work area shoulders without arm 7/8" dia., split wheel, rubber interference 2 required 67206 • Using contact wheel, grind with  1-1/4" x 72" 67101 None 1-1/4" wide abrasives; 1-1/16" 70 durometer, serrated radius or greater 2" dia. x 1-1/4" wide, urethane 67207 • Using contact wheel, finish using 1-1/4" x 72" 67107 None 1-1/4" wide abrasives; 1/2"  70 durometer radius or greater 7/8" dia. x 1-1/4" wide,  urethane 67208 • Soft durometer contact wheel 1-1/4" x 72" 67109 None with smooth face for fine 50 durometer, smooth finishing applications 2" dia. x 1-1/4" wide, urethane 67209 • 70 durometer wheel provides 1/2" x 72" 67139 None a firm support for abrasive belt 70 durometer, serrated to allow base finishing of 4" dia. x 1/2" wide, urethane channel areas     144   STATIONARY MACHINESSTATIONARY MACHINES  Versatility Grinder Contact Arms   Part Number Comments Belt Size Contact Wheel Assembly  Platen Pad (includes bearing and shaft)  67210 • Polish contours without gouging  5/8" to  11642 None workpiece 1" x 72" 40 durometer, serrated, scoop 4" dia. x 5/8" wide, rubber 67211 • Blend fillet welds; excellent for  1/2" to  11638 None tight radius work 1" x 72" 70 durometer, severe radius 4" dia. x 1/2" wide, rubber 67212 • Use contact wheel or 1/2" x 72" 11078 11025* platen area for grinding 70 durometer Soft/sponge  and finishing 5/8" dia. x 3/8" wide, rubber platen 67213 • Cutlery contact arm assembly  2" x 78" 67122 11839 incorporates a large diameter 50 durometer, smooth Hard/cork  contact wheel and a raised 4" dia. x 2" wide, Rubber platen platen assembly for complete  finishing capabilities 67214 • Grind and deburr using either 1" x 72"  11650 11605** the serrated contact wheel  70 durometer, serrated Hard/cork or platen assembly 2" dia. x 1" wide, urethane platen 67215, 67216 • Aggressive grinding applications 67215 11847:  None 2" x 72" 70 durometer, serrated 2" dia. x 2" wide, urethane 67216 65363 None 1-1/2" x 72" 70 durometer, serrated 2" dia. x 1-1/2" wide, urethane 67217 • Using contact wheel, finish 1-1/2" x 72" 65378 None using 1-1/2" wide abrasives;  70 durometer, flat 9/16" radius or greater 1"dia.  x 1-1/2" wide, urethane 67218 • Excellent for very fine finishing 1" x 72" 67068 None work; use when extreme 4" dia. x 1/2" wide conformability is necessary. cotton cushion 67219 • Material removal applications, 2" x 72" 67116 None castings, etc. 2-3/4" dia. x 2" wide, rubber 90 durometer, serrated 67220, 67221, 67222, 67223 • Turbine blade clusters 67220 11332 None • Great for strap polishing 1/2" x 72" 1/4" dia. x 3/8" wide, steel in offset areas  67221 11068 None 1/2" x 72" 5/16" dia. x 3/8" wide, steel 67222 11352 None 3/4" x 72" 5/16" dia. x 5/8" wide, steel 67223 11342 None 1/2" x 72"  50 durometer 5/16" dia. x 3/8" wide, rubber 67224 • Grind, blend and polish welds; 1" x 72" 11620 None strap polish using slack of belt. 40 durometer, rubber 4" dia. x 1" wide, smooth 67226, 67227 • Access tight areas 67226 11049 None 1/2" x 72" 3/16" dia. x 3/8" wide, steel  3-1/8" reach, 3 required 67227 11049 None 1/2" x 78" 3/16" dia. x 3/8" wide, steel 6-1/2" reach, 3 required * Also accepts 11026 Hard/Cork and 11027 Thin Platen ** Also accepts 11604 Soft/Sponge Platen     67230 • Using contact wheel, finish using 1-1/4" x 72" 67105 None 1-1/4" wide abrasives; 1/2"  50 durometer radius or greater 7/8" dia. x 1.2" wide,  flat urethane 67239 • Grind and polish implants 1/4" x 72" 11072 None 7/16" x 1/8" crowned brass 67242 • Excellent for finishing 1" x 72" 67284 None shoulder areas as well as 40 durometer, serrated contact wheel grinding 2" dia. x 5/8" wide, rubber 67245 • Turbine blade clusters 1/2" x 72" 11332 None • Great for strap polishing 1/4" dia. x 3/8" wide, flat steel in offset areas 67250 • Polish and Grind with slack of belt 1/2"-2" x 96" Slack Arm None (see page 146) 67251 • Polish golf club heads 2" x 82" 67285 None • Soft face excellent for polishing 6" x 1-1/2" wide, and blending coated fabric 67264 • Excellent for finishing 2" x 72" 67263 None shoulder areas as well as 1-1/2" x 2" wide, flat rubber contact wheel grinding 67278 • Work stop and guide keep grind 1" x 72" 65135 None perpendicular 5/8" x 1" wide, flat urethane • Tight radius finishing   145 STATIONARY MACHINESSTATIONARY MACHINES  Versatility Grinder Contact Arms   Part Number Comments Belt Size Contact Wheel Assembly  Platen Pad (includes bearing and shaft)   Contact Arm Extenders   Versatility Grinder Contact Arm Extenders   • Allows use of longer abrasive belts! Versatility Grinder accepts standard 72" long abrasive belts. These extenders allow use of longer belts, as indicated.  • For use with only Versatility Grinder Contact Arms.  67270 Extender 67272 Extender  • For 84" long belts • For 96" long belts  67271 Extender 67273 Extender  • For 90" long belts • For 102" long belts   Model 67273     146   STATIONARY MACHINESSTATIONARY MACHINES   Air Tool Post Grinder Air-Powered Abrasive Belt Machine   Mounts to Standard Lathes, for Applications from Grinding to Superfinishing   ABRASIVE BELTS  1-1/2" wide x 24" long (38 mm x 610 mm)   Accessories: Page 159   Model 66402   Surface finishes of 2-3 RA are obtainable, using micron-grade abrasive belts.   Model Motor Motor Sound Abrasive Belt Size Maximum Air Flow Max. SFPM Weight Length Height  Number hp (W) RPM Level Inch (mm) CFM/SCFM (LPM) (SMPM) Pound (kg) Inch (mm) Inch (mm)  66402 1.86 (1,387) 7,200 84 dB(A) 1-1/2 (38) x 24 (610) 9/66 (1,869) 4,700 (1,428)* 19 (8.6) 15 (381) 10 (254) Additional Specifications:  Air Inlet Thread 3/8" NPT   • Hose Size 1/2" (13 mm)   • Air Pressure 90 PSIG (6.2 Bar) * At Maximum Load   Model 66402  For Belts 1-1/2" Wide x 24" Long  • For use on metal, glass, stone, rubber, ceramic, carbide composites and other hard to grind materials.  • Mounts to standard lathes. Simple tool holder mounting. Holds close tolerances.  • Reduce surface finish on materials prior to a superfinishing process.   • In-line belt tracking prevents uneven belt stretching, as found  on conventional belt tracking arrangements.   • Fingertip controls for both motor on/off and adjustable air-belt tensioning.  • Cutaway housing design allows working into workpiece  shoulders from right to left.   67250 Slack Arm Attachment, Shown on Model 64900   64864   Model 67250  Slack Arm Attachment   • Optional 67250 Slack Arm Attachment mounts on standard Versatility Grinder (see page 140).  • Slack Arm Attachment allows operator to bring  unique workpieces to belt slack for efficient  final finishing.  • Design allows two-hand control of workpiece. Abrasive side of belt faces downward to easily contact curved surfaces (see photo).  • Ideal for curved piping.   Model 64864  Conversion Kit   • Converts standard Versatility Grinder to “Slack Action” model (see pages 140-141).  • Eliminates pulley design for less maintenance.   Model 67250   Model 66402     147   STATIONARY MACHINESSTATIONARY MACHINES  Electric Tool Post Grinder Electric Abrasive Belt Machine   Mounts to Standard Lathes, for Applications from Grinding to Superfinishing   ABRASIVE BELTS  2" wide x 36" or 48" long (51 mm x 914 mm, 1,219 mm)   Models for Belts 2" Wide x 48" Long  • All models feature air-powered belt tensioning.   • Easily accessible belt tracking and tensioning adjustments.  • Coolant nozzle with adjustable flow valve.  • Easy to dress contact wheel.    Fixed Speed Models for Faster Cutting  Model 65750  7,200 SFPM, 240 V (AC)  Model 65751  6,000 SFPM, 240 V (AC)  • Each model has water-tight on/off switch, and built-in ammeter for measuring motor load.  • 90 durometer, fixed 66619 Contact Wheel is standard.   Variable Speed Models  Model 65752  2,500-10,500 SFPM, 220 V (AC)  Model 65753  2,500-10,500 SFPM, 440 V (AC)  • Each model includes variable speed rate motor. Digital display shows operating speed, with keypad adjustment to desired  speed, even as the tool is in operation.   • Uses flexible diamond and other abrasive belts.  • 90 durometer, fixed 66640 Contact Wheel is standard.   Models for Belts 2" Wide x 36" Long  • Each model includes 90 durometer, 65338 Contact Wheel  (4" dia. x 2" wide, standard smooth face).  • Includes corrosion-resistant parts, coolant nozzle with adjustable flow valve and coolant drip pan.  • Water-tight on/off switch. Built-in ammeter measures load.  • Rigidly mounts to lathe compound for close tolerance work.  Model 64991  4,500 SFPM, 230 V (AC), 60 Hz  Model 64993  4,500 SFPM, 230 V (AC), 50 Hz  • Each model features air-powered belt tensioning.  Model 65014  4,500 SFPM, 230 V (AC), 60 Hz  Model 65016  4,500 SFPM, 230 V (AC), 50 Hz  • Each model features manual belt tensioning lever.   Accessories: Page 159   M odel Motor Motor Sound Air Pressure Max. SFPM Weight Length Height  Number hp (W) RPM Level PSIG (Bar) (SMPM) Voltage Phase Frequency Pound (kg) Inch (mm) Inch (mm)  64991 2.0 (1,491) 3,450 81 dB(A) 90 (6.2) 4,500 (1,367) 230 1 60 Hz 89 (40) 16 (406) 13-1/2 (343) 64993 2.0 (1,491) 2,850 81 dB(A) 90 (6.2) 4,500 (1,367) 230 1 50 Hz 89 (40) 16 (406) 13-1/2 (343) 65014 2.0 (1,491) 3,450 81 dB(A) – 4,500 (1,367) 230 1 60 Hz 89 (40) 16 (406) 13-1/2 (343) 65016 2.0 (1,491) 2,850 81 dB(A) – 4,500 (1,367) 230 1 50 Hz 89 (40) 16 (406) 13-1/2 (343) 65750 3.0 (2,237) 3,450 81 dB(A) 90 (6.2) 7,200 (2,187) 240 1 60 Hz 108 (49) 19 (483) 18 (457) 65751 3.0 (2,237) 2,850 81 dB(A) 90 (6.2) 6,000 (1,823) 240 1 50 Hz 108 (49) 19 (483) 18 (457) 65752 3.0 (2,237) – 81 dB(A) 90 (6.2) 2,500-10,500 (762-3,200) 220 3 50-60 Hz 108 (49) 19 (483) 18 (457)  65753 3.0 (2,237) – 81 dB(A) 90 (6.2) 2,500-10,500 (762-3,200) 440 3 50-60 Hz 108 (49) 19 (483) 18 (457)  Additional Specifications:  Air Inlet Thread 1/4" NPT    Model 64991  Model 65750  240 V (AC)   Model 65750  240 V (AC)   240 V (AC) 240 V (AC)   Model 64991     148   STATIONARY MACHINESSTATIONARY MACHINES  Bandsaw Blade Grinder Electric Abrasive Belt Machine for Bandsaw Blades   Efficiently Removes “Weld Slag” From All Areas of Saw Blades   Abrasive Belts: Page 212  •  Accessories: Page 159   ABRASIVE BELTS  1-1/2" wide x 104" long (38 mm x 2,642 mm)   Model Weight Width Depth Height  Number Voltage Phase Frequency Pound (kg) Inch (mm) Inch (mm) Inch (mm)  64500 120 V(AC) 1 60 Hz 145 (65.8) 34-1/2 (876) 23 (584) 26 (660)   Removing excess weld from gullet (teeth) with cut-off wheel. Removing weld slag from back of blade.   BOTTOM of Blade TOP of Blade   Converters and distributors configure bandsaw blades to customer requirements from blade stock. Blades are butt- welded together, configuring them to their circular shape.  This process results in excess material called weld slag,  which must be removed from three areas of the blade:  (1) top and bottom, (2) back, and (3) between blade teeth.   Dynabrade’s Bandsaw Blade Grinder powers a large abrasive  belt (1-1/2" wide x 104" long) through an efficient process for  removing weld slag quickly and easily!   • 3-in-1 work station allows operator to remain in one position for entire process   • Design ensures consistent efficiency by minimizing operator variables  • Automatic depth-stop prevents overgrinding of blade  • Accepts bandsaw blades up to 1-1/2" wide  • Vacuum port included for easy connection to portable vacuum or central vacuum system    Model 64500  Bandsaw Blade Grinder  • 3-in-1 station allows operator to remove weld slag from bandsaw blade top, bottom, back, and between blade teeth. This is all accomplished at ONE work station, maximizing  operator efficiency!  • Top and bottom – Weld slag is removed by positioning it in the target weld removal area. Blade alignment plate assists operator to properly position area to be ground. Push-down lever is engaged, lowering the abrasive belt onto the blade. Weld is then removed from the blade in two sweeps (top  and bottom).  • Blade back grinder – Abrasive disc removes slag from the back of the blade. Operator remains at single work station, optimizing efficiency.  • Gullet grinder – Cut-off wheel removes weld slag and excess from gullet (teeth).  • Depth-stop adjustment – Prevents the abrasive belt from over-grinding additional material from blade. Blade thickness is maintained, ensuring structural integrity and maximum blade life.  • Efficient tracking adjustment – Dynabrade’s famous belt tracking technology allows grinding as close to blade teeth  as possible.   Model 64500   Weld slag is removed by engaging Push-Down Lever,  which lowers abrasive belt onto blade.   120 V (AC)   NEW! NEW!     12" Surface Depth 4"  9" Working Height   36"   20"   15"   21"   149   STATIONARY MACHINESSTATIONARY MACHINES  Wet Deburring Station Entraps Particles in Air/Water Mixing Zone   Helps Reduce Potential Flammability of Workplace   Accessories: Page 159   Model 64100   Shown with Optional Motor, Sold Separately   M odel Weight Width Depth Height  Number Voltage Phase Frequency Pound (kg) Inch (mm) Inch (mm) Inch (mm)  64100 120 1 60 Hz 110 (50) 21 (533) 20 (508) 36 (914)   Model 64100  120 V (AC), Tabletop Design  • Wet Deburring Station offers a wet filtration system to capture potentially combustible filings and dust in an air/water mixing zone. By entrapping these particles in water, the potential flammability of the workplace is reduced.  • Greatly decreases work area’s potential flammability when deburring volatile materials.  • Unique tabletop design not offered by other manufacturers.  • Can be placed on cart for transportability to every work station.   • Dual grinding wheel capability.  • Electric motor is sold separately.  • Pulls combustible filings and dust through an air/water mixing zone. Also offers convenient disposal of slurry.  • Transparent wheel covers adjust vertically to compensate  for wheel wear, and laterally for dual spindle motors of  various widths.  • Grated work surface.    • Water level view port allows operator to set initial water level and monitor level for adjustment.  • Water reservoir and float valve automatically compensate for water evaporation during use.   • Internal compartments are accessed with no tools required.  • Hose drain port allows slurry to be conveniently drained with  connection of standard garden hose.  • GFI protection.  • Built-in 120 V (AC) outlet for powering buffer/grinder.  • Corrosion-proof acrylic  tank liner.  • Powder coat finish.  • No paper filters to replace. 120 V (AC)   NEW! NEW!     Portable Vacuum Systems .......................... 151 Portable Vacuum Accessories ...................... 152 Hose Cuffs ............................................ 154 Exhaust Hoses, Swivel Adapters, Conversion Kits ...................................... 155   Dust Collection Receptacles, Self-Contained Systems ............................ 156 Overskirt Shrouds, Exhaust Hoses, Air Lines...... 157 Downdraft Tables .................................... 158     Portable Vacuum Systems Choose from Electric or Pneumatic Systems   Ideal for Use with Dynabrade Vacuum Air Tools   DUST COLLECTION SYSTEMS   Electric Portable Vacuum System  Connect and operate two tools simultaneously  Models 61300-61311  • Choose from 9.9 (36 litres) or 17 gallon (64 litres) models.  Dry vacuum only.  • Two-tool setup: two pneumatic outlets and two vacuum hose ports.  • Heavy duty stainless steel drum. Drum can be removed for special applications or locations.  • HEPA filtration (0.3 micron) with felt insert and paper bag.  • Variable vacuum control; Electronic thermal protection device prevents heat overload of motor.  • Disposable paper bag fits inside steel drum for convenient collection/disposal of debris. One disposable paper bag included with vacuum purchase. (Reorder part number 64682 for 9.9 gal. [36 L] vacuum; part number 80076 for 17 gal. [64 L] vacuum.)  • Max flow internal pneumatic workings.  • 7.5' (229 cm) water static lift/230 mbar vacuum.  • Two of the most innovative, lightweight 1-1/4" (32 mm) dia. x 20' (6 m) long coaxial hoses on the market today (see page 153).  • Auto on/off switch, 26' (8 m) electrical cord.  • UL (United States and Canada), CE (Europe), GOST (Russia) and Korean approved/listed. Also certified “M” Class Dust Collection (Europe).  • Features Dynabrade’s Composite-Style Couplers and Vacuum Hose Swivel Adapter (see pages 161 and 155).    Pneumatic Portable Vacuum System  Spark-free operation  Model 64625  • Powerful industrial vacuum for commercial use, particularly where use of electric equipment is hazardous or where electric supply is not available.  • 10 gal. (37.8 litres) capacity; developed to be safe and portable.  • Top of the vacuum head is designed to work as a shelf to hold air tools, sandpaper, etc.  • The filter element is water resistant and washable.  • Includes a set of five dust bags (Part No. 64627).   DUST COLLECTION SYSTEMS 151   Model Capacity Voltage / Plug Air Pressure Water Static Lift Sound Shipping Weight Height Width Number Gallon (Litres) Frequency Watts (Region) PSIG (Bar) Inch/cm/mbar Level lbs. (kg) Inch (mm) Inch (mm)  61300 9.9 (36) 120V/60 Hz 1,300 US (US/Canada) 90 (6.2) 90/229/230 76 dB(A) 48.4 (22.0) 38-1/2 (978) 20-7/8 (530) 61301 17 (64) 120V/60 Hz 1,300 US (US/Canada) 90 (6.2) 90/229/230 76 dB(A) 61.6 (28.0) 44-7/8 (1,140) 27-5/8 (702) 61302 9.9 (36) 230V/50 Hz 1,400 UK (UK) 90 (6.2) 90/229/230 76 dB(A) 48.4 (22.0) 38-1/2 (978) 20-7/8 (530) 61303 17 (64) 230V/50 Hz 1,400 UK (UK) 90 (6.2) 90/229/230 76 dB(A) 61.6 (28.0) 44-7/8 (1,140) 27-5/8 (702) 61304 9.9 (36) 110V/60 Hz 1,300 UK (UK) 90 (6.2) 90/229/230 76 dB(A) 48.4 (22.0) 38-1/2 (978) 20-7/8 (530) 61305 17 (64) 110V/60 Hz 1,300 UK (UK) 90 (6.2) 90/229/230 76 dB(A) 61.6 (28.0) 44-7/8 (1,140) 27-5/8 (702) 61306 9.9 (36) 230V/50 Hz 1,400 CEE7/XVII (Europe) 90 (6.2) 90/229/230 76 dB(A) 48.4 (22.0) 38-1/2 (978) 20-7/8 (530) 61307 17 (64) 230V/50 Hz 1,400 CEE7/XVII (Europe) 90 (6.2) 90/229/230 76 dB(A) 61.6 (28.0) 44-7/8 (1,140) 27-5/8 (702) 61308 9.9 (36) 230V/50 Hz 1,400 None (International) 90 (6.2) 90/229/230 76 dB(A) 48.4 (22.0) 38-1/2 (978) 20-7/8 (530) 61309 17 (64) 230V/50 Hz 1,400 None (International) 90 (6.2) 90/229/230 76 dB(A) 61.6 (28.0) 44-7/8 (1,140) 27-5/8 (702) 61310 9.9 (36) 220V/60 Hz 1,400 (Far East) 90 (6.2) 90/229/230 76 dB(A) 48.4 (22.0) 38-1/2 (978) 20-7/8 (530) 61311 17 (64) 220V/60 Hz 1,400 (Far East) 90 (6.2) 90/229/230 76 dB(A) 61.6 (28.0) 44-7/8 (1,140) 27-5/8 (702) 64625 10 (37.8) – – – 110-120 (7.6-8.3) 90/229/230 73 dB(A) 48.4 (22.0) 44 (1,118) 19 (483)   Model 61300   Model 64625   2006 Ind Cat_Dust Collection:DC  9/27/06  5:10 PM  Page 151     Locking-Front Wheel Assembly  Part Number 80051  • Lock vacuum in place with the simple ease of a push-lock system.   Replacement Brushes  Part Number 80057   110 V - 60 Hz.  • Quantity of two.   Part Number 80058 230 V - 50 Hz.  • Quantity of two.   Wall Mount Bracket  Part Number 96534  • Keep vacuum off floor and  convenient for use.   Hose Hanger  Part Number 96581  • Keep vacuum hose out of the way and  off the floor.  • Use in conjunction with one of the vacuum trays.  Hose hanger can be placed anywhere on the tray.   Vacuum Edge Guard  Part Number 61361  • Non-marring protective edge allows vacuum unit to be placed on finished surfaces.  • For use with 9.9 gallon  (36 litres) models only.   Electric Portable Vacuum Accessories Customize your Portable Vacuum System   For More Efficient Use of Valuable Workshop Space   DUST COLLECTION SYSTEMS   Vacuum Tray  Part Number 96567 Part Number 96563 9.9 gallon (36 litres) 17 gallon (64 litres)  • A convenient, heavy duty storage tray for work-related items.  • Shown with optional 96581 Hanger, ideal for hanging vacuum hoses.   Vacuum Cleaning Kit  Part Number 96558  • Includes 6' (1.8 m) long x 1-1/4" (32 mm) dia. vacuum hose, curved handle and two extension pipes along with round brush, crevice tool and coarse dirt nozzle attachments.  • For use with all electric portable vacuums.  • 64621 Cleaning Kit  is available - for use with discontinued vacuums (models 64600 and 64605).   “Y” Vacuum Connector  Part Number 64686  • Allows two tools to be connected to the same portable vacuum system.   DUST COLLECTION SYSTEMS 152   Disposable Bags Part Number Description For Use With  50692 1-2 Micron (400/case) 95575 Bag ’n Box System and 54288 Bag ’n Bag System 50693 1-2 Micron (24/pkg.) 95575 Bag ’n Box System and 54288 Bag ’n Bag System 64682 5 Micron (10/pkg.) Portable Vacuum Models 61300, 61302, 61304, 61306 and 61308 80076 5 Micron (10/pkg.) Portable Vacuum Models 61301, 61303, 61305, 61307 and 61309 64627 Plastic (12/pkg.) Portable Vacuum Model 64625 64601 5 Micron (5/case) Portable Vacuum Model 64600 (discontinued)  64606 5 Micron (5/case) Portable Vacuum Model 64605 (discontinued)   2006 Ind Cat_Dust Collection:DC  9/27/06  5:11 PM  Page 152     DUST COLLECTION SYSTEMSDUST COLLECTION SYSTEMS  Electric Portable Vacuum Accessories Customize your Portable Vacuum System   For Maximum Dust Collection and Ease of Operation   Paper Cartridge Filter  Part Number 64683  • Cartridge filtration  capturing 1 micron  respirable-size-particles.   153   HEPA Cartridge Filter  Part Number 64684  • True HEPA filtration is recognized as one of the most efficient air filtration methods available and has been proven to remove airborne particles.  • Our HEPA Cartridge Filter is certified 99.97% efficient in capturing 0.3 micron respirable-size-particles. (One micron equals 1 millionth of a meter.)   Coaxial Vacuum Hose Assemblies   1-1/4" (32 mm) Vac Hose  1-1/4" (32 mm) Vac Hose  1-1/4" (32 mm) Vac Hose   For Dynabrade Vacuum System  Part Number 94941  Standard 1-1/4" (32 mm) dia. x 20' (6 m) Long Coaxial Vacuum Hose Assembly   Cuff P/N 95800 Cuff P/N 95800   Cuff P/N 95800 Insert P/N 95895  Cuff P/N 95800  For Older Two-Hand Tools  Swivel Adapter P/N 96573  1-1/4" (32 mm) Vac Hose  1-1/4" (32 mm) Vac Hose  1-1/4" (32 mm) Vac HoseCuff with Air Line Exit  Cuff with Air Line Exit Air Line Assembly - 11" (279 mm) of  Air Line Assembly will Extend Past the Cuff Dynabrade Male Plug P/N 95675   Dynabrade Female Plug P/N 95677 13-3/4" (350 mm) of Air Line Assembly will Extend Past the Cuff   For Non-Dynabrade Vacuum Systems  Part Number 94943  Optional 1-1/4" (32 mm) dia. x 20' (6 m) Long Coaxial Vacuum Hose Assembly   Swivel Adapter P/N 96573  Swivel Adapter P/N 64616Cuff with Air Line Exit  Cuff with Air Line Exit Air Line Assembly - 11" (289 mm) of Air Line Assembly will extend past the cuff  Dynabrade Female Plug P/N 95677 25-5/8" (600 mm) of Air Line Assembly will Extend Past the Cuff  Insert P/N 95895   Dynabrade Coupler P/N 94960   Dynabrade Coupler P/N 94960  Y-Adapter P/N 96571 MUST BE ORDERED SEPARATELY   2006 Ind Cat_Dust Collection:DC  9/27/06  5:11 PM  Page 153     DUST COLLECTION SYSTEMSDUST COLLECTION SYSTEMS   154 Hose Cuffs Many Configurations to Match Vacuum System Requirements   Single Hose Cuffs (Except Where Noted)   Hose Cuffs for Dynabrade Vacuum Tools - See Chart Below for Hose Cuff Details   TWO FACTORY- INSTALLED CUFFS  Order 3/4" (19 mm) dia. hose separately   TWO FACTORY- INSTALLED CUFFS  Order 1" (25 mm) dia. hose separately   Part  Connection to Connection to  Number  Vacuum Hose Vacuum Tool   96414 1-1/4" Thread 1-1/2" Non-Thread 95698 1-1/4" Thread 2" Non-Thread 64616 1-1/4" Thread 2-1/4" Non-Thread 96103 1-1/2" Thread 1" Non-Thread 96104 1-1/2" Thread 1" Non-Thread   Keeps the air line out of the way   96102 1-1/2" Thread 1-1/4" Non-Thread   Use optional 95895 Insert to mount to tool’s vacuum outlet Use 95396 Hose Cuff for 1" (25 mm) exhaust hose   95699 1-1/2" Thread 1-1/4" Non-Thread 97051 1-1/2" Thread 2" Non-Thread 95700 2" Thread 1-1/4" Non-Thread   Includes 95699 Cuff Adapter and 95698 Swivel Cuff (2" [51 mm]) Use 95396 Hose Cuff for 1" (25 mm) exhaust hose   Part  Connection to Connection to Number  Vacuum Hose Vacuum Tool   95601 3/4" Thread 3/4" Non-Thread 95602 3/4" Thread 3/4" Non-Thread 95396 1" Thread 1" Non-Thread 95599 1" Thread 1" Non-Thread 54208 1" Thread 1-1/4" Non-Thread   95894 1-1/4" Thread 1" Non-Thread   Includes 95895 Insert to mount to tool’s vacuum outlet directly   96006 1-1/4" Thread 1" Non-Thread   Swivel cuff   95800 1-1/4" Thread 1-1/4" Non-Thread   Use optional 95895 Insert to mount to tool’s vacuum outlet   96412 1-1/4" Thread 1-1/4" Thread   Use to connect two 1-1/4" (32 mm) hoses   96413 1-1/4" Thread 1-1/2" Thread   Part  Connection to Connection to 95895 Dynabrade Vacuum Number  Vacuum Hose Vacuum Tool Insert* Tool Compatibility   95396 1" Thread 1" Non-Thread – Self-Generated Vacuum Palm-Style Random Orbital Sanders; Vacuum Dynabug® , Dynabug® “Model T”, Dynabug®II, Dynaline, Dynafile®II 95800 1-1/4" Thread 1-1/4" Non-Thread Optional Self-Generated Vacuum Two-Hand Random Orbital Sanders;  Vacuum DynaLocke® Sanders 95894 1-1/4" Thread 1" Non-Thread Included Central Vacuum Random Orbital Sanders (Palm-Style and 6" [152 mm] Dia. Two-Hand); 6" (152 mm) Dia. Central Vacuum Two-Hand Gear-Driven Sanders  *Use 95895 Insert to mount to tool’s vacuum outlet   2006 Ind Cat_Dust Collection:DC  9/27/06  5:11 PM  Page 154     DUST COLLECTION SYSTEMSDUST COLLECTION SYSTEMS   155   Vacuum Hose Reduction Assembly   Part Number 96580 2" (51 mm) Non-Thread Vacuum Connection to  1-1/4" (32 mm) Tool Connection   • For connecting tools with 2" (51 mm) vacuum port to Dynabrade Portable Vacuum.  • Use to connect Dynabrade 8" (203 mm) dia. Central Vacuum Random Orbital and Gear-Driven Sanders.   Exhaust Hoses Many Configurations to Match  Vacuum System Requirements   Hose Diameter Part Number Length Cuffs  52036 2-1/2' (762 mm) 1  3/4" (19 mm) 50834 5' (152 cm) 2 95729 Specify length 0*   50638 18" (46 cm) 2 50682 6' (183 cm) 2  1" (25 mm) 95596 4-1/2' (137 cm) 1 95709 10' (305 cm) 2 95395 Specify-up to 50' (15-1/4 m) 54201 4-1/2' (137 cm) 0  1-1/4" (32 mm) 54202 6' (183 cm) 2 54205 Specify - up to 50' (15-1/4 m) 0 *  1-1/2" (38 mm) 95847 Specify - up to 50' (15-1/4 m) 0  *NOTE: Optional 95602 Factory-Installed Cuffs available   Exhaust Hose Assembly   Part Number 95820 1" (25 mm) Dia. x 10' (3 m) Long   • For use with Dynorbital ® Sanders.  • 95709 Flex Hose: 1" (25 mm) x 10' (3-1/4 m) long with cuffs.  • 95816 Air Line: 1/4" (6 mm) dia. x 11' (3-3/8 m) long  • 95362 Rubber Connectors.   Vacuum Hose  Swivel Adapters The Adapter SWIVELS for  Comfortable Tool Maneuverability • Lightweight vacuum hose; easy connection to air tools.  • 1" (25 mm) connection to tool.   Part Number 96572   1" Swivel Adapter   • 1" (25 mm) connection to vacuum hose.   Part Number 96573   1-1/4" Swivel Adapter   • 1-1/4" (32 mm) connection to vacuum hose.   1"  (25 mm) 1-1/4"  (32 mm) P/N 96573   • Pad diameter determines which kit is right for your tool.  • Conversion kit allows user to change tool into desired vacuum configuration.   Vacuum  Conversion Kits For use with Dynorbital–Spirit ® and Dynorbital ® Supreme    Pad Diameter Converts Tool to Kit Part Number  3-1/2" (89 mm) Vacuum Ready 57118 3-1/2" (89 mm) Central Vacuum 57119 5" (127 mm) Vacuum Ready 57120 5" (127 mm) Central Vacuum  57121 6" (152 mm) Vacuum Ready 57122 6" (152 mm) Central Vacuum  57123   Part Number 57120   2006 Ind Cat_Dust Collection:DC  9/27/06  5:11 PM  Page 155     Dust Collection Receptacles  Self-Contained Dust Collection Systems Easily Attach to Air-Powered Dynabrade Vacuum Tools Easily Attach to Air-Powered Dynabrade Vacuum Tools   DUST COLLECTION SYSTEMSDUST COLLECTION SYSTEMS 156   Mini-Reusable Felt Bag  Part Number 50694  • 11" (279 mm) long x 3" (76 mm) wide. End opens up - no need to remove bag from tool when emptying.  • New bag design features a one micron filter rating. Bag traps over 99% of vacuum particles one micron or larger.   Reusable Felt Bag   Part Number 50683  Hook-Face Closure  • 14-1/2" (368 mm) long x  7-1/2" (191 mm) wide.  • New bag design features a one-micron filter rating. Bag traps over 99% of vacuum particles one micron  or larger.    Reusable Felt Bag  Part Number 56304 Zipper-Lock Closure  • 14-1/2" (368 mm) long x 7-1/2"  (191 mm) wide.  • New bag design features a one micron filter rating. Bag traps over 99% of vacuum particles one micron or larger.   Durable Box Receptacle  Part Number 95575   • A pre-punched hole accepts 1" (25 mm) diameter Dynabrade vacuum hoses.  • Receptacle houses a throw-away paper vacuum bag.  • Paper bag reorder (50692 400/case), (50693 24/pkg).   Mini-Flex-Hose System  Part Number 54284  • 95580 Air Line 1/4" (6 mm) dia. x 28" (711 mm) long.  • 50638 Flex-Hose 1" (25 mm) dia. x 18" (457 mm) long.  • 50694 Mini-Reusable Felt Bag.   6' (1.8 m) Long Flex-Hose Systems  • Both systems include 1" (25 mm) dia. x 6' (1.8 m) long 50682 Flex-Hose.   Part Number 50617  • Includes 50683 Bag  with hook-face closure.   Part Number 56303  • Includes 56304 Bag  with zipper-lock closure.   “Bag-in-Box” System  Part Number 54290  • Includes: 95361 Air Line, 5' (1.5 m) long, 50682 Flex-Hose (1" [25 mm] dia. x 6' [1.8 m] long) and 95575 Durable Box Receptacle (to house bag and store tool).  • Sample paper bag included. Paper bag reorder: 50692 (400/case) or 50693 (24/pkg.)   “Bag-In-Bag” System  Part Number 54288  • 50692 Disposable Vacuum Bag fits inside reusable 50697 Mesh-Style Bag, which attaches to operator’s belt for added maneuverability.   • Includes: 50682 Flex Hose (1" [25 mm] dia. x  6' [1.8 m] long), 95361 Air Line (1/4" 96 mm) dia. x 5' [1.5 m] long) and 94996 Belt Strap.   2006 Ind Cat_Dust Collection:DC  9/27/06  5:11 PM  Page 156     DUST COLLECTION SYSTEMSDUST COLLECTION SYSTEMS   For air exhaust and dust collection   157   Exhaust Hose and Air Line Assemblies   Overhose Water Line Assembly  Part Number 95801  1" Diameter x 4-1/2' Long   • 95596 Flex Hose (1" dia. x 4-1/2' long with cuff).  • 95361 Air Line (1/4" dia. x  5' long).  • 95579 Water Line Assembly (10' long with fittings).  • 95362 Rubber Connectors.  • Use with Wet Sanders.   Air Line/Vac Hose Adapter  Part Number 96020  1-1/2" Diameter x 18" Long   • Allows Dynorbital®  Supreme (Palm-Style or Two-Hand) to be coupled with European vacuum system.  • 95847 Exhaust Hose: 1-1/2" diameter.  • 96104 Hose Cuff with air line port.  • 96019 Air Line: 1/4" dia. x 18" long.  • 96102 Hose Cuff.   Part Pad Conversion Number Diameter Type  57556 5" (127 mm) Self-Generated Vacuum 57557 5" (127 mm) Central Vacuum 57558 6" (152 mm) Self-Generated Vacuum 57559 6" (152 mm) Central Vacuum   For Dynorbital ®Supreme and Dynorbital–Spirit ®Sanders Overskirt Shrouds   Overskirt Shroud Conversion Kits  • All-in-one kit allows conversion of non-vacuum tools to self-generated or central vacuum tools.  • For use on 5" (127 mm) or 6" (152 mm) Dynorbital-Spirit®  and Dynorbital® Supreme sanders.   Part Pad Tool Number Diameter Compatibility   57084 3" (76 mm)  Random Orbital Sanders3-1/2" (89 mm) 57086 5" (127 mm) Random Orbital Sanders 56063 5" (127 mm) Wet Random Orbital Sanders 57087 6" (152 mm) Random Orbital Sanders 56065 6" (152 mm) Wet Random Orbital Sanders   Overskirt Shrouds  • Has built-in vacuum port.  • Replace standard lip-seal  shrouds in seconds.  • Protects pad edges when  working near workpiece sides.   Overhose Assembly  • May be used to further reduce noise levels by  as much as 5 dB(A).  • Overhose redirects exhaust  away from operator and workpiece.  Part Number 94994  1-1/4" Diameter x 3' Long   • Use with disc sanders and die grinders that feature our short muffler.   Part Number 53621  1-3/4" Diameter x 3' Long   • Use with 1 hp disc sanders and die grinders.   Hose Cover  Part Number 95986   5' (1.5 m) Long Cloth Cover  • Covers air line and exhaust/vacuum hoses (not included).  • Eliminates damage from hoses dragging on the workpiece.   Rubber Connectors  Part Number 95362  (5/pkg.)  • Used to strap tool air line to tool’s exhaust hose for easy  “all-in-one” maneuverability.   2006 Ind Cat_Dust Collection:DC  9/27/06  5:11 PM  Page 157     DUST COLLECTION SYSTEMSDUST COLLECTION SYSTEMS   158 Downdraft Sanding Tables Eliminate Airborne Dust and Contaminants While Sanding   Model  Motor Vacuum Sound Working Area  Working Area Shipping  Number hp Volts Phase Suction Level Width Length Height Weight  64201 1 110/220 1 3,000 CFM 72 dB(A) 33" (838 mm) 41" (104 cm) 36" (914 mm) 275 lbs. (125 kg) 64657 1.5 (Dual) 115 1 7,000 CFM 75 dB(A) 48" (122 cm) 96" (244 cm) 37" (940 mm) 970 lbs. (440 kg) 64699 1 110/220 1 3,000 CFM 72 dB(A) 33" (838 mm) 60" (152 cm) 36" (914 mm) 285 lbs. (129 kg) 64700 1 110/220 1 3,000 CFM 72 dB(A) 36" (914 mm) 72" (183 cm) 36" (914 mm) 365 lbs. (166 kg)   Standard Duty Tables  64201 -  Working Area of 33" (838 mm) W x 41" (104 cm) L  64699 -  Working Area of 33" (838 mm) W x 60" (152 cm) L  64700 -  Working Area of 36" (914 mm) W x 72" (183 cm) L   • Ideal for use with vacuum-ready or non-vacuum tools.  • Dual filtration – accepts 1-micron pleated paper filters:  20" (508 mm) W x 25" (635 mm) L  - Models 64201 and 64699 include two filters. - Model 64700 includes three filters.  • Rhino Linings® coated tabletop surface is durable and anti-slip.  • Two handy storage compartments for tools and accessories.  • 5" (127 mm) dia. casters allow easy maneuverability of table.  • Two convenient dust-tight electric outlets.  • Power source: One heavy duty electric motor, 1.0 hp.  • Electric capacity: 110 volt, 220 volt (single phase); three phase available upon request.  • Each model includes one pre-filter blanket.  • Two paper filters to choose from:  20" (508 mm) W x 25" (635 mm) L x 2" (51 mm) thick  - 64671 Standard Paper Air Filter. - 64672 UL-Rated Class I Non-Flammable Air Filter (recommended when sanding bare metal).   Heavy Duty Table  64657  Working Area of 48" (122 cm) W x 96" (244 cm)L   • Up to 70% more filter area than competitive brands.  • Dual filtration – pre-filter blanket and 1-micron paper filters.  • Includes twelve paper filters - Eight 64658 filters: 20" (508 mm) x 25" (635 mm)  - Four 64659 filters:16" (406 mm) x 25" (635 mm)  • High quality reverse incline blowers. Heavy duty TEFC twin electric motors.  • Base unit is all-metal construction with CNC milled  3/4" (19 mm) MDF tabletop.  • Optional anti-static and anti-slip mat available (64970) as well as optional 5" (127 mm) diameter casters.  • Power source: Two heavy duty TEFC electric motors, 1.5 hp.  • Electric capacity: 115 volt (single phase), 208 volt (three phase), 230 volt (single phase), 230 volt (three phase); 460 volt (three phase) available upon request.   Model 64700  Model 64201  Model 65657   2006 Ind Cat_Dust Collection:DC  9/27/06  5:11 PM  Page 158     Air Supply Accessories .............................. 160 Arbors ................................................ 186 Carbide Burrs and Carbide Burr Kits .............. 189 Collets and Inserts .................................. 190 Contact Wheels and Assemblies .................. 196 Couplers, Coupler/Plug Assemblies................ 161 Disc Pads, Misc....................................... 178 Disc Sanding Pads & Assemblies .................. 181 Drop-In Motors ...................................... 190 Dynabug® “Model T” & Wet Dynabug ® Pads...... 175 Dynabug® II Sanding Pads.......................... 176 Dynacushion® Pneumatic Wheels.................. 183 Dynafine® & Dynafine® Backsplash Pads  ........ 173 Dynaflex Expander Wheels.......................... 185 DynaJet, Filter-Regulator-Lubricator .............. 162 Dynaline Sanding Pads, Flat & Contoured ........ 177 DynaMitt Sanding Glove ............................ 207 Dynamount Bench Mount .......................... 206 Dynaswivel® Air Line Connector.................... 163 DynaWheel Pneumatic Wheels .................... 182 DynaZip Wheels, Hubs, Assemblies................ 185 Dynūba, Lubricants and Grease.................... 205 File Board & Dynabug® Sanding Pads ............ 174 Finesse Creme and Glaze .......................... 206   Gear-Driven Sanding Pads, Hook-Face............ 172 Gear-Driven Sanding Pads, Vinyl & Rubber ...... 171 Hanger for Right Angle Mini-Orbital Sander ...... 180 Hanging Brackets, Tool Top Handle................ 207 Interface Pads........................................ 170 Leveling Jacks ...................................... 195 Mandrels, Chucks, Mounting Hardware .......... 187 Mini-Dynorbital® Sanding Heads & Pads.......... 180 Motor Tune-Up Kits .................................. 192 Polishing Pads, Hook-Face ........................ 179 Portable Wet Tank Assembly........................ 206 Random Orbital Head Kit............................ 179 Random Orbital Pads, Loop-Face & Rubber ...... 168 Random Orbital Sanding Pads, Hook-Face........ 167 Random Orbital Sanding Pads, Misc. .............. 164 Random Orbital Sanding Pads, Vinyl .............. 166 Safety-Lock Levers .................................. 207 Sanding Pad Conversions .......................... 169 Sanding Pads, Gear-Driven & Random Orbital.... 169 Side Handles ........................................ 207 Threaded Adapters .................................. 188 Wet Dynafine® Sanding Pads ...................... 172 Wheel Accessories & Slotted Wheels.............. 184   Accessories Intro.qxd:Layout 1  9/27/06  5:50 PM  Page 1     ACCESSORIESACCESSORIES   160 Air Supply Accessories   Cost-Effective Solutions for Air Systems   Swivel Air Line Hoses  • Eliminates kinking, fittings swivel 360° for easy use.  • Tough, flexible and lightweight.   Press-On Fittings  Flexible Air Line Assemblies   Part For Use With Number Description  96225 1/4" NPT Female 1/4" (6 mm) Hose 96226 1/4" NPT Male 96227 1/8" NPT Male 3/8" (10 mm) Hose 96228 1/4" NPT Female 96229 1/4" NPT Male   Reusable Fittings  • No tools required, simply insert fittings into air hose.    Part For Use With Number Description  8 mm Dia. Hose 94897 1/4" NPT Male  Hose I.D. Part  Female Male Inch (mm) Number Fittings Fittings Length  95361 1 1 5 ft. (1.5 m) 1/4 (6) 95580 1 1 28" (711 mm) 95807 0 0 Specify Length 95938 1 1 Specify Length 3/8 (10) 11292 0 2 8 ft. (2.4 m) 1/2 (13) 95870 1 1 5 ft. (1.5 m)   Hose I.D. Hose O.D. Part  Female Male Inch (mm) Inch (mm) Number Fittings Fittings Length  96217 1 (1/4") 1 (1/4") 3 ft. (910 mm) 96218 1 (1/4") 1 (1/8") 3 ft. (910 mm) 5/32 (4) 1/4 (6) 96219 1 (1/4") 1 (1/4") 6 ft. (1.8 m) 96220 1 (1/4") 1 (1/8") 6 ft. (1.8 m) 96221 0* 0* Specify Length 96222 1 (1/4") 1 (1/4") 3 ft. (910 mm) 1/4 (6) 3/8 (10) 96223 1 (1/4") 1 (1/4") 6 ft. (1.8 m) 96224 0* 0* Specify Length * Order fittings separately, if desired  Part Hose Female Male Length Number O.D. Fittings Fittings   5 ft. (1.5 m) 94874 12.7 mm 0 2 94863 12.7 mm 1 1 12 ft. (3.7 m) 94851 12.7 mm 0 2 94852 12.7 mm 1 1 25 ft. (7.6 m) 94876 12.7 mm 0 2 94892 12.7 mm 1 1 328 ft. (100 m) 94860 12.7 mm 0 0   Speed Control Dial  • Connects directly to air tool.   Lightweight 8 mm I.D. Air Hose Assembly  • Use this assembly to connect an FRL to a Dynabrade tool for optimum results.  • Air line is 66% lighter than conventional PVC and rubber hoses.  • Reinforced hose is made of an anti-abrasive PU and thermoplastic rubber compound.  • High flexibility and narrow bending radius of hose prevent choking.  • High resistance to ozone, hydrocarbons, fats, oils, and slightly aggressive chemical products.   Part Air Flow Range Body Size Number Thread Size (NPT) SCFM (LPM)  95675 1/4" Male  1/4" 95677 1/4" Female  Up to 74 (2,095) 96005 3/8" Male  3/8" 98263 3/8" Male  Up to 138 (3,900)98264 3/8" Female  1/2" 98271 1/2" Male  Up to 138 (3,900)98272 1/2" Female    Hose and Tool Part Air Flow Range Connections Number SCFM (LPM)  1/4" NPT 95745 Up to 25 (708) 3/8" NPT 95746 Up to 26-45 (736-1,274)   • Durable zinc-plated steel construction.  • Provides up to twice the air flow compared to standard plug design.   Ported Design to Prevent Starving of the Air Tool Plugs   2006 Ind Cat_Accessories:2006 Industrial Catalog.qxd  9/27/06  5:28 PM  Page 160     ACCESSORIESACCESSORIES  Couplers and Coupler/Plug Assemblies   Steel and Brass Couplers  • Durable nickel-plated steel and brass construction.  • Single action quick-connect by just inserting plug into coupler. Pull back on sleeve of coupler for quick disconnect.   161   Coupler Body Size   Coupler Thread Size    Body Part Thread Size Air Flow Range Size Number NPT SCFM (LPM)   1/4" 95674 1/4" Female  Up to 74 (2,095)95684 1/4" Male  3/8" 98261 3/8" Female  Up to 138 (3,900)98262 3/8" Male  1/2" 98269 1/2" Female  Up to 138 (3,900)98270 1/2" Male    Body Part Thread Size Air Flow Range Size Number NPT SCFM (LPM)   1/4" 97566 1/4" Female Up to 55 (1,558)97567 1/4" Male   Composite-Style Couplers  • Composite-style design provides  maximum air flow to tools.  • Heavy duty construction.  • Easy connect/disconnect by single  push-button action.  • Shock-proof, low-vibration, crush- resistant.  • Lightweight 1.4 oz. (0.04 kg), non-marring composite material.  Teal Composite Couplers  • Designed for Industrial Interchange plugs.   Part Thread Size Air Flow Range Body Size Number Color NPT SCFM (LPM)  94960 Black 1/4" Female  Up to 54 (1,529) 1/4" 94980 Black 1/4" Male  94920 Teal 1/4" Female Up to 37 (1,048)94921 Teal 1/4" Male   Safety Couplers  • Unique “Two Step” Safety Disconnect System releases air pressure before tool is disconnected.   • Engineered to minimize air leakage and eliminates “hose whip.”  • Aerodynamically-designed valve improves air flow to tool.  • Ergonomically designed for easy  one-hand operation.  • Advanced anti-static composite and stainless steel construction; cannot rust or corrode.  • Impact resistant with non-scratch surface.  • Conforms to ISO 4414 standard, and these specifications: 7.2/7.4 European full flow profile.   Coupler/Plug Assemblies  • Assemblies include one coupler and one plug.  • Maximum working pressure: 150 PSIG (10 Bar).  • Temperature Range: -4°F to 212°F (-20°C to 100°C).   Coupler Coupler Plug Plug  Body  Part Thread Body Thread Air Flow Range Size Number Size (NPT) Size Size (NPT) SCFM (LPM)  95676 1/4" Female  1/4" 1/4" Male  1/4" 95850 1/4" Female  1/4" 1/4" Female  Up to 74 (2,095)95685 1/4" Male  1/4" 1/4" Male  95851 1/4" Male  1/4" 1/4" Female  98265 3/8" Female  3/8" 3/8" Male  3/8" 98266 3/8" Female  3/8" 3/8" Female  Up to 138 (3,900)98267 3/8" Male  3/8" 3/8" Male  98268 3/8" Male  3/8" 3/8" Female  98273 1/2" Female  1/2" 1/2" Male  1/2" 98274 1/2" Female  1/2" 1/2" Female  Up to 138 (3,900)98275 1/2" Male  1/2" 1/2" Male  98276 1/2" Male  1/2" 1/2" Female    Plugs with Steel and Brass Couplers   Plugs with Black Composite-Style Couplers   Coupler Coupler Plug Plug  Body  Part Thread Body Thread Air Flow Range Size Number Size (NPT) Size Size (NPT) SCFM (LPM)  94990 1/4" Female  1/4" 1/4" Male  1/4" 94991 1/4" Female  1/4" 1/4" Female  Up to 54 (1,529)94992 1/4" Male  1/4" 1/4" Male  94993 1/4" Male  1/4" 1/4" Female   Coupler Coupler Plug Plug  Body  Part Thread Body Thread Air Flow Range Size Number Size (NPT) Size Size (NPT) SCFM (LPM)  97572 1/4" Female  1/4" 1/4" Male 1/4" 97573 1/4" Female  1/4" 1/4" Female  Up to 55 (1,558)97574 1/4" Male  1/4" 1/4" Male  97575 1/4" Male  1/4" 1/4" Female    Plugs with Safety Couplers   Provide Maximum Air Flow to Tools   2006 Ind Cat_Accessories:2006 Industrial Catalog.qxd  9/27/06  5:28 PM  Page 161     Filter-Regulator-Lubricator   Cost-Effective Solutions for Air Supply Systems  ACCESSORIESACCESSORIES 162   Part  Thread Weight Recommended Air Flow Number Size kg (lb.) Range SCFM (LPM)  94466 1/4" Female NPT 0.06 kg up to 35 SCFM (991 LPM 94467 1/4" Female NPT 0.06 kg up to 991 LPM 10.3 Bar (150 PSIG) maximum on all models   DynaJet In-Line Blow Gun Clean Off Work Surfaces Without Disconnecting   • Only connect once... permanently mounts between coupler and air hose to purge air line of water and contaminants before starting up air tools.  • Durable aluminum construction, weighs only 2 oz. (0.06 kg).   Part Number 94466 Standard Design   • Provides no restriction of air line pressure.  Part Number 94467 Safety Tip Design   • Reduces line pressure down to 30 PSIG (2 Bar).  • Meets O.S.H.A. requirements of special relief hole in nozzle which limits pressure to 30 PSIG (2 Bar) when dead ended and used on an air line of 150 PSIG (10.3 Bar) or less.   Proper Installation for DynaJet In-Line Blow Gun Connection   1/4" Male NPT   1/4" Male NPT   1/4" Female NPT on both ends   Coupler Blow Gun Air Line   Part Number 94466  Part Number 94467   Filter  • Two stage filtration of water and contaminants from the air system.   Part Number Air Inlet Thread  11400 3/8" NPT 11406 1/2" NPT   Filter-Regulator  • Two stage filtration of water and contaminants from the air system.  • Features safety-lock knob for maintaining accurate air pressure regulation.   Part Number Air Inlet Thread  11402 3/8" NPT 11408 1/2" NPT   Filter-Regulator-Lubricator  • Two stage filtration of water and contaminants from the air system.  • Features safety-lock knob for maintaining accurate air pressure regulation.  • Adjustable oil drop to meter the amount of oil into the air system.   Part Number Air Inlet Thread  11405 3/8" NPT 11411 1/2" NPT   Regulator-Lubricator  • Features safety-lock knob for maintaining accurate air pressure regulation.  • Adjustable oil drop to meter the amount of oil into the air system.   Part Number Air Inlet Thread  11404 3/8" NPT 11410 1/2" NPT   Regulator  • Features safety-lock knob for maintaining accurate air pressure regulation.   Part Number Air Inlet Thread  11401 3/8" NPT 11407 1/2" NPT  Lubricator  • Adjustable oil drop to meter the amount of oil into the air system.   Part Number Air Inlet Thread  11403 3/8" NPT 11409 1/2" NPT   Additional Specifications: Maximum Air Flow 9.7 Bar (140 PSIG) Female Ports   3/8" NPT = 40 SCFM (1,133 LPM) @ 100 PSIG (6.9 Bar) 1/2" NPT = Up to 55 SCFM (1,558 LPM) @ 100 PSIG (6.9 Bar)   NOTE:For installation and maintenance instructions refer to  Dynabrade’s Filter-Regulator-Lubricator Manual (PD00.72)   2006 Ind Cat_Accessories:2006 Industrial Catalog.qxd  9/27/06  5:28 PM  Page 162     ACCESSORIESACCESSORIES   163  Dynaswivel ® Air Line Connectors Never Fight an Air Hose Again!   For use with Most Air Tools... Grinders, Sanders, Glue Guns, Staple Guns, Drills, Buffers, etc.   • The Dynaswivel® is a “universal-joint” that connects portable air tools to an air line.  • It improves tool maneuverability, minimizes operator fatigue and extends hose life.  • Patented; works great on air tools or paint guns.   THE PROBLEM  Aluminum Construction  Single Pivot   • Right angle “single-pivot” swivels 360° at one location.  • Designed to permit air hose to extend horizontally away from tool while allowing 360° tool maneuverability.  • Great for stationary equipment.   Non-Marring Composite Construction  Double Pivot   • Swivels 360° AT TWO PIVOT POINTS allowing the air hose to drop directly to the floor while providing superb tool handling.   Double Pivot, Flow Control   • Swivels 360° AT TWO PIVOT POINTS allowing the air hose to drop directly to the floor while providing superb tool handling.  • Finger-tip air-flow control dial.   THE SOLUTION   IMPORTANT: 150 PSIG (10.3 Bar) maximum on all models *NOTE: Do not exceed recommended torque value of 28-30 newton metres  **NOTE: Do not use on percussion tools or in areas of high mechanical abuse   Part Thread Flow Air Flow Range Weight Number Size Control SCFM (LPM) lb. (kg)  1/8" Male x 25 95852** No up to 25 (708) 0.18 (0.08)1/4" NPT Female 1/4" NPT 95460** No up to 25 (708) 0.20 (0.09) 95734** Yes up to 25 (708) 0.24 (0.11) 3/8" NPT 95461** No 26-45 (736-1275) 0.40 (0.18) 1/2" NPT 95462** No 46-65 (1303-1841) 0.80 (0.36) 3/4" NPT 95690** No above 65 (1840) 1.50 (0.68)   Dynaswivel® Display Pak  Model 96177  • Includes one counter top display box and ten 94300 Dynaswivel® Air Line Fittings.   Thread Part Flow Air Flow Range Weight Size Number Pivot Control SCFM (LPM) oz. (kg)   1/4" NPT 94300* Double No up to 33 (935) 2.15 (0.06) 94407* Double Yes up to 46 (1303) 2.40 (0.08)   Aluminum Construction  Double Pivot  • Swivels 360° AT TWO PIVOT POINTS allowing the air hose to drop directly to the floor while providing superb tool handling.   Double Pivot, Flow Control  • Swivels 360° AT TWO PIVOT POINTS allowing the air hose to drop directly to the floor while providing superb tool handling.   • Finger-tip air-flow control dial.   Thread Part Flow Air Flow Range Weight Size Number Control SCFM (LPM) lb. (kg)  1/4" NPT 95590** No up to 25 (708) 0.11 (0.05) 3/8" NPT 95591** No 26-45 (736-1275) 0.26 (0.12) 1/2" NPT 95592** No 46-65 (1303-1841) 0.46 (0.21)   2006 Ind Cat_Accessories:2006 Industrial Catalog.qxd  9/27/06  5:28 PM  Page 163     Multi-Use Sanding Pad   Urethane Foam  Use with 6, 7, 8, or 9-hole abrasive discs   • For use with with random orbital sanders. 5/16"-24 female thread.   • Rounded foam edge of soft density pad conforms to shape of coves and corners.   • Hook-face attachment is offset from pad edge, allowing abrasive to flex around radius.   • Ideal for use with scalloped edge abrasives.    • For use on random orbital sanders with vacuum capabilities on wood, metal and solid surfaces.   • Single-hub design reduces vibration and wear.   • 13,000 maximum operating speed; 5/16"-24 female thread.   HiVac 3-Hole Pad For use with HiVac Dynorbital-Spirit ® Random Orbital Sanders   • Medium density pad accepts  3" (76 mm) dia. hook-face or mesh-style abrasive discs.   • 5/16"-24 female thread.   Non-Vacuum Pads   Pad Part Radius Diameter Number Edge Nap Thickness  3-1/2" (89 mm) 57796 3/8" (10 mm) Short 5/8" (16 mm)   5" (127 mm) 57792 3/8" (10 mm) Medium 5/8" (16 mm) 57795 3/8" (10 mm) Short 5/8" (16 mm)   Vacuum Pad   Pad Part Radius Diameter Number Edge Nap Holes Thickness  5" (127 mm) 57799 3/8" (10 mm) Short 5 5/8" (16 mm)   Pad Diameter Part Number Face Nap Holes Thickness  3" (76 mm) 56144 Hook Short 3 1/2" (13 mm)   Vacuum Pad   Pad Diameter Part Number Face Nap Holes Thickness  6" (152 mm) 54331 Hook Short 15 5/8" (16 mm)   ACCESSORIESACCESSORIES 164   Radius Edge Pad Rounded Foam Edge  13,000 max. operating speed • Soft density   Vacuum Pad   2006 Ind Cat_Accessories:2006 Industrial Catalog.qxd  9/27/06  5:28 PM  Page 164     ACCESSORIESACCESSORIES   165   • Medium density pad for use with random orbital sanders.   • 5/16"-24 female thread.   Vacuum Pads   Pad Diameter Part Number Face Nap Holes Thickness   5" (127 mm) 56240 Hook Short 6 3/8" (10 mm) 56241 Vinyl – 6 3/8" (10 mm)   6-Hole Pattern Pad Pad Designed Especially for  Pacific Rim Countries   • Dust-free sanding and elimination of pilling problems provide longer abrasive life and improved finish.   • Medium density, 5/16"-24 male thread, 13,000 RPM maximum.   Mesh Abrasive Pad Compatible with Mesh Abrasive Material  13,000 max. operating speed • Medium density   Vacuum Pads   Pad Diameter Part Number Face Nap Holes Thickness  5" (127 mm) 56320 Hook Short 44 3/8" (10 mm)   6" (152 mm) 56321 Hook Short 52 3/8" (10 mm)   8" (203 mm) 56322 Hook Short 48 3/8" (10 mm)   11" (279 mm) 53997 Hook Short 15 1/2" (13 mm)   • Medium density pad for use with random orbital sanders.   • 5/16"-24 female thread.   Non-Vacuum Pads   Pad Diameter Part Number Holes Thickness Density  5" (127 mm) 56205 0 3/8" (10 mm) Medium  6" (152 mm) 56206 0 3/8" (10 mm) Medium   Value Pad Quality Sanding Pad   Vinyl-face   Vacuum Pads   Pad Diameter Part Number Holes Thickness Density  5" (127 mm) 56207 6 3/8" (10 mm) Medium  6" (152 mm) 56208 6 3/8" (10 mm) Medium   Mesh Abrasive System   • A complete system for those who want the high-efficiency advantages of the mesh abrasive application.    • Each system includes: - Tool - Sanding pad - “Bag-in-Bag” Vacuum System   Mesh Conversion Kit   Part Number 58055  5" (127 mm) Dia.   • Transform your non-vacuum random orbital sander into a complete mesh abrasive vacuum system.   • Conversion kit includes: - All parts necessary for tool conversion, 56320 Vacuum Sanding Pad for Mesh Abrasives, “Bag-in-Bag” Vacuum System. - Mesh abrasive discs are not included.   System Tool Sanding Pad P/N Part No. Tool Description Part No.   59119 59116 3" (76 mm) HiVac Vacuum-Ready  56144Dynorbital-Spirit®   58052 58054 5" (127 mm) Vacuum-Ready  56320Dynorbital-Spirit®   58053 59028 6" (152 mm) Vacuum-Ready  56321Dynorbital-Spirit®   58412 58411 8" (203 mm) Vacuum-Ready  56322Two-Hand Dynorbital® Sander 58508 58504 Vacuum-Ready Dynabug® II 56319  Display Packs Display Pads in Refillable Dynabrade Box • Each display pack consists of ten Dynabrade random orbital sanding pads.  • Pads fit Dynabrade tools as well  as most other manufacturers’ sanders.   Pad Pack Pad Vacuum Diameter Part No. Part No. Type Holes   5" (127 mm) 95994 56106 Non-Vacuum 0 95995 56104 Vacuum 5   6" (152 mm) 95996 56107 Non-Vacuum 0 95997 56105 Vacuum 5   2006 Ind Cat_Accessories:2006 Industrial Catalog.qxd  9/27/06  5:28 PM  Page 165     Vinyl-Face Random Orbital Sanding Pads   Premium Urethane Sanding Pads Perfectly Weight-Mated for Dynabrade Tools   ACCESSORIESACCESSORIES 166   3" (76 mm), 3-1/2" (89 mm), 5" (127 mm), 6" (152 mm) Pads: 13,000 RPM maximum operating speed • 5/16"-24 male thread 8" (203 mm) Pads: 10,000 maximum operating speed • Mounts with 5 screws   Non-Vacuum Pads   Pad Diameter Part Number Thickness Density   3" (76 mm)* 56084 5/8" (16 mm) Medium 56086 5/8" (16 mm) Soft   3-1/2" (89 mm)* 56097 5/8" (16 mm) Soft 56098 5/8" (16 mm) Medium 56102 3/8" (10 mm) Soft   5" (127 mm) 56106 3/8" (10 mm) Medium 56175 5/8" (16 mm) Medium 56185 5/8" (16 mm) Soft 56103 3/8" (10 mm) Soft   6" (152 mm) 56107 3/8" (10 mm) Medium 56177 5/8" (16 mm) Medium 56187 5/8" (16 mm) Soft   8" (203 mm) 56234 3/8" (10 mm) Medium  *NOTE: Our 3" (76 mm) and 3-1/2" (89 mm) pads, without holes, can also be used for vacuum sanding. Vacuum pick-up is around periphery of pad.   Vacuum Pads   Pad Diameter Part Number Holes Thickness Density   3" (76 mm)* 56084 0 5/8" (16 mm) Medium 56086 0 5/8" (16 mm) Soft   3-1/2" (89 mm)* 56097 0 5/8" (16 mm) Soft 56098 0 5/8" (16 mm) Medium 56100 5 3/8" (10 mm) Soft 56104 5 3/8" (10 mm) Medium  5" (127 mm) 56176 5 5/8" (16 mm) Medium 56186 5 5/8" (16 mm) Soft 56241 6 3/8" (10 mm) Medium 56101 6 3/8" (10 mm) Soft   6" (152 mm) 56105 6 3/8" (10 mm) Medium 56178 6 5/8" (16 mm) Medium 56188 6 5/8" (16 mm) Soft  *NOTE: Our 3" (76 mm) and 3-1/2" (89 mm) pads, without holes, can also be used for vacuum sanding. Vacuum pick-up is around periphery of pad.   Channel Vacuum Pads   Pad Diameter Part Number Holes Thickness Density  56251 5 3/8" (10 mm) Soft   5" (127 mm) 56252 5 3/8" (10 mm) Medium 56254 5 5/8" (16 mm) Medium 56256 5 5/8" (16 mm) Soft 56261 6 3/8" (10 mm) Soft   6" (152 mm) 56262 6 3/8" (10 mm) Medium 56264 6 5/8" (16 mm) Medium 56266 6 5/8" (16 mm) Soft   Vinyl-Face Pads  Ideal for PSA-type disc adhesion.  Remove abrasive adhesive paper liner and press abrasive to vinyl-face sanding pad.  Quick disc removal.   Non-Vacuum Pads  High quality back-up pad. Weight-mated for smooth running and minimal tool vibration.   Vacuum Pads  Vacuum holes are precisely located to achieve proper alignment with abrasive discs for optimum vacuum capabilities.   Channel Vacuum Pads  1/8" (3 mm) deep recessed channel.  No need to align vacuum holes to  pad holes.   2006 Ind Cat_Accessories:2006 Industrial Catalog.qxd  9/27/06  5:29 PM  Page 166     ACCESSORIESACCESSORIES   167   Pad Diameter Part Number Holes Thickness Nap Density  56250 5 3/8" (10 mm) Short Medium    5" (127 mm) 56253 5 3/8" (10 mm) Short Soft 56255 5 5/8" (16 mm) Short Medium 56257 5 5/8" (16 mm) Short Soft 56260 6 3/8" (10 mm) Short Medium   6" (152 mm) 56263 6 3/8" (10 mm) Short Soft 56265 6 5/8" (16 mm) Short Medium 56267 6 5/8" (16 mm) Short Soft   Non-Vacuum Pads   Pad Diameter Part Number Thickness Nap Density  56087 5/8" (16 mm) Short Medium  3" (76 mm)* 56090 5/8" (16 mm) Long Medium 56145 1/2" (13 mm) Short Medium 54311 5/8" (16 mm) Short Soft  3-1/2" (89 mm)* 54313 5/8" (16 mm) Short Hard 54314 5/8" (16 mm) Long Medium 54325 3/8" (10 mm) Short Medium   5" (127 mm) 56157 3/8" (10 mm) Short Soft 56180 5/8" (16 mm) Short Medium 56195 5/8" (16 mm) Short Soft 54327 3/8" (10 mm) Short Medium    6" (152 mm) 56158 3/8" (10 mm) Short Soft 56182 5/8" (16 mm) Short Medium 56197 5/8" (16 mm) Short Soft   8" (203 mm) 56236 3/8" (10 mm) Short Medium  *NOTE: Our 3" (76 mm) and 3-1/2" (89 mm) pads, without holes, can also be used for vacuum sanding. Vacuum pick-up is around periphery of pad.   Vacuum Pads   Hook-Face Pads  Short nap pads for use with  reattachable discs. Long nap pads for use with  non-woven nylon discs.   Non-Vacuum Pads  High quality back-up pad. Weight-mated for smooth running and minimal tool vibration.   Vacuum Pads  Vacuum holes are precisely located to achieve proper alignment with abrasive discs for optimum vacuum capabilities.   Channel Vacuum Pads  3 mm (1/8") deep recessed channel.  No need to align vacuum holes to  pad holes.   Channel Vacuum Pads   Pad Diameter Part Number Holes Thickness Nap Density  56087 0 5/8" (16 mm) Short Medium  3" (76 mm)* 56090 0 5/8" (16 mm) Long Medium 56144 3 1/2" (13 mm) Short Medium 54311 0 5/8" (16 mm) Short Soft  3-1/2" (89 mm)* 54313 0 5/8" (16 mm) Short Hard 54314 0 5/8" (16 mm) Long Medium 54326 5 3/8" (10 mm) Short Medium 56155 5 3/8" (10 mm) Short Soft 56181 5 5/8" (16 mm) Short Medium 5" (127 mm) 56196 5 5/8" (16 mm) Short Soft 56240 6 3/8" (10 mm) Short Medium 54331 44 3/8" (10 mm) Short Medium 54328 6 3/8" (10 mm) Short Medium 56156 6 3/8" (10 mm) Short Soft  6" (152 mm) 56183 6 5/8" (16 mm) Short Medium 56198 6 5/8" (16 mm) Short Soft 56321 52 3/8" (10 mm) Short Medium  6" M8 Thread 54324 6 5/8" (16 mm) Short Medium  *NOTE: Our 3" (76 mm) and 3-1/2" (89 mm) pads, without holes, can also be used for vacuum sanding. Vacuum pick-up is around periphery of pad.   Short nap Long nap   Hook-Face Random Orbital Sanding Pads   Premium Urethane Sanding Pads Perfectly Weight-Mated for Dynabrade Tools  3" (76 mm), 3-1/2" (89 mm), 5" (127 mm), 6" (152 mm) Pads: 13,000 RPM maximum operating speed • 5/16"-24 male thread 8" (203 mm) Pads: 10,000 maximum operating speed • Mounts with 5 screws   2006 Ind Cat_Accessories:2006 Industrial Catalog.qxd  9/27/06  5:29 PM  Page 167     Pad Diameter Part Number Holes Thickness  5" (127 mm) 56310 0 3/8" (10 mm)  6" (152 mm) 56312 0 3/8" (10 mm)   Pad Diameter Part Number Holes Thickness  5" (127 mm) 56311 5 3/8" (10 mm)  6" (152 mm) 56313 6 3/8" (10 mm)   Loop-Face Random Orbital Sanding Pads   Loop-Face Pads Accept Hookit ™ II Abrasives   ACCESSORIESACCESSORIES 168   Loop-Face Pads  Pads accept 3M™  Hookit™ IIabrasives.   Non-Vacuum Pads  High quality back-up pad. Weight-mated for smooth running and minimal tool vibration.   Vacuum Pads  Vacuum holes are precisely located to achieve proper alignment with abrasive discs for optimum vacuum capabilities.   13,000 RPM maximum operating speed    •    5/16"-24 male thread    •    Medium density   Non-Vacuum Pads   Vacuum Pads   Rubber Random Orbital Sanding Pads   Rubber Sanding Pads for the Economy-Minded Professional   Diamond Pattern   Low-cost alternative to premium urethane pads for the economy-minded professional. Use with PSA-type abrasives.   Post Pattern  Grooves in bottom  of pad allow for enhanced vacuum pick-up. No need to align vacuum holes with abrasive holes. Use with PSA-type abrasives.   Long Nap  Hook-Face  Use with non-woven nylon discs.   12,000 RPM maximum operating speed    •    5/16"-24 male thread    •    Medium density   Non-Vacuum Pads   Pad Diameter Part Number Face Nap Thickness   5" (127 mm) 50630 Diamond – 1/2" (13 mm) 50605 Hook Long 1/2" (13 mm)   6" (152 mm) 50632 Diamond – 1/2" (13 mm) 50606 Hook Long 1/2" (13 mm)   Vacuum Pads   Pad Diameter Part Number Face Nap Holes Thickness  50631 Diamond – 5 1/2" (13 mm)  5" (127 mm) 50695 Post Pattern – 5 1/2" (13 mm) 50607 Hook Long 5 1/2" (13 mm) 50633 Diamond – 6 1/2" (13 mm)  6" (152 mm) 50696 Post Pattern – 6 1/2" (13 mm) 50610 Hook Long 6 1/2" (13 mm)   NEW!NEW!   2006 Ind Cat_Accessories:2006 Industrial Catalog.qxd  9/27/06  5:29 PM  Page 168     ACCESSORIESACCESSORIES   169   Random Orbital and Gear-Driven Sanding Pads   Premium Foam Pads for Large Diameter Sanders - For use on Both Non-Vacuum and Vacuum Models   Vinyl-Face Pads  Ideal for PSA-type disc adhesion. Remove abrasive adhesive paper liner and press abrasive to vinyl-face sanding pad. Quick disc removal.   Hook-Face Pads  Short nap pads for use with reattachable discs.   Loop-Face Pads  Pads accept 3M™  Hookit™ IIabrasives.   3,000 RPM maximum operating speed   •   Mounts with five screws   •   Five holes   •   Medium density   Non-Vacuum/Vacuum Pads   Pad Diameter Part Number Face Nap Thickness  56230 Vinyl – 1/2" (13 mm)  11" (279 mm) 56231 Hook Short 1/2" (13 mm) 56232 Loop – 1/2" (13 mm)   NEW!NEW!   Pad Conversions   Hook-to-Hookit ™ II   For use with 11" (279 mm) diameter sanders   Standard loop material attaches to standard hook-face sanding pad  Loop-face for  Hookit™ IIabrasives   Part Number 56220  • Thin velcro-backed sheet attaches to standard hook-face pad and accepts Hookit™ IIabrasives.  • For non-vacuum use only.   Hook-to-Vinyl   Non-vacuum and vacuum use   Loop material attaches to standard hook-face sanding pad   Premium vinyl-face for  PSA-type abrasives   • Thin velcro-backed sheet attaches to standard hook-face pad and accepts PSA-type abrasives.   Part No. Diameter   53992 5" (127 mm) 53993 6" (152 mm)   2006 Ind Cat_Accessories:2006 Industrial Catalog.qxd  9/27/06  5:29 PM  Page 169     ACCESSORIESACCESSORIES   170 Interface Pads “O” Style Interface Pad   Dynafoam Interface Pads  • Attaches between sanding pad and hook-face abrasive.   • Soft foam increases conformability allowing operator to easily  follow contours. Converts standard pad into a fine finishing and finessing pad!   • Interface pad easily contours to most surfaces.   Part Number 56220   • For use with Dynabrade’s 11" (279 mm) Vacuum-Ready Random Orbital OR Gear-Driven Sanders.   • Attaches between sanding pad and hook-face abrasive.   • Soft foam increases conformability allowing operator to easily  follow contours.    • Accepts vacuum (“O” Style) hook-face abrasive discs.   Hook-face pad Hook-face abrasive   Part No. Diameter   53974 3" (76 mm) 53976 3-1/2" (89 mm) 53978 5" (127 mm) 53980 6" (152 mm) 53982 8" (203 mm)   Part No. Diameter   53975 3" (76 mm) 53977 3-1/2" (89 mm) 53979 5" (127 mm) 53981 6" (152 mm)   Hook-face interface pad attaches between sanding pad and  hook-face abrasive   For Random Orbital Sanders  Non-Vacuum and Vacuum For Random Orbital Sanders  Non-Vacuum and Vacuum   For Dynaline and Dynabug Sanders  For Dynafine® Detail Sanders  For Dynaline and Dynabug Sanders  For Dynafine® Detail Sanders  Part No. Diameter   53970 Tear Drop 53972 Triangular   Part No. Diameter   53984 2-3/4" (70 mm) x 11" (278 mm) For the Dynaline 53986 2-3/4" (70 mm) x 8" (203 mm) For the Dynaline 53988 3-2/3" (93 mm) x 7" (178 mm) For the Dynaline and Dynabug   Part No. Diameter   53971 Tear Drop 53973 Triangular   Part No. Diameter   53985 2-3/4" (70 mm) x 11" (278 mm) For the Dynaline 53987 2-3/4" (70 mm) x 8" (203 mm) For the Dynaline 53989 3-2/3" (93 mm) x 7" (178 mm) For the Dynaline and Dynabug   Vinyl-to-Hook Conversions  • Thin sticky-back sheet adheres to current vinyl-face pad and accepts hook-face abrasives and hook-face interface pads.   Thin sticky-back sheet adheres  to current  vinyl-face pad   Hook-face accepts abrasives and  hook-face  interface pads   Vinyl-face pad Hook-face interface  pad can be attached between sanding pad and hook-face abrasive Hook-face abrasive   Thin sticky-back sheet with  hook-face bottom   2006 Ind Cat_Accessories:2006 Industrial Catalog.qxd  9/27/06  5:29 PM  Page 170     ACCESSORIESACCESSORIES   171  Vinyl-Face Gear-Driven Sanding Pads   Premium Urethane • Medium Density •  Perfectly Weight-Mated for Dynabrade Tools   Rubber Gear-Driven Sanding Pads   • Rubber pads for the economy-minded professional.   • Hook-face pads mount with five screws.   • 1,500 RPM maximum operating speed, medium density.   Non-Vacuum Pads  Pad Diameter Part Number Holes Nap Thickness   8" (203 mm)  54332 0 Long 1/2" (13 mm) 54335 0 Short 1/2" (13 mm)   Vacuum Pads  Pad Diameter Part Number Holes Nap Thickness   8" (203 mm)  54333 8 Long 1/2" (13 mm) 54336 8 Short 1/2" (13 mm)   4 screw-mount system on model numbers 57306-57315  •  5 screw-mount system on model numbers 57441-58446 6 screw-mount system on original aluminum housing tool design   Non-Vacuum Pads   Pad Part Max. Diameter Number RPM Thickness Screws  57379 10,000 3/8" (10 mm) 6  5" (127 mm) 57761 12,000 3/8" (10 mm) 5 57776 12,000 3/8" (10 mm) 4 57762 12,000 3/8" (10 mm) 5  6" (152 mm) 57771 12,000 3/8" (10 mm) 4 57380 10,000 3/8" (10 mm) 6   8" (203 mm) 56234 10,000 1/2" (13 mm) 5   Vacuum Pads   Pad Part MOS Diameter Number RPM Thickness Holes Screws   6" (152 mm) 57763 12,000 3/8" (10 mm) 6 5 57381 10,000 3/8" (10 mm) 8 6   8" (203 mm) 56235 10,000 1/2" (13 mm) 8 5   Vinyl-Face Pads  Ideal for PSA-type disc adhesion.  Remove abrasive adhesive paper liner and press abrasive to vinyl-face sanding pad.  Quick disc removal.   Non-Vacuum Pads  High quality back-up pad. Weight-mated for smooth running and minimal tool vibration.   Vacuum Pads  Vacuum holes are precisely located  to achieve proper alignment with abrasive discs for optimum vacuum capabilities.   Channel Vacuum Pads  3 mm (1/8") deep recessed channel. No need to align vacuum holes to  pad holes.   Channel Vacuum Pad   Pad Part Max. Diameter Number RPM Thickness Holes Screws  6" (152 mm) 57772 12,000 3/8" (10 mm) 6 4   2006 Ind Cat_Accessories:2006 Industrial Catalog.qxd  9/27/06  5:29 PM  Page 171     Pad Diameter Part Number Max. RPM Thickness Holes Screws   6" (152 mm) 57774 12,000 3/8" (10 mm) 8 4 57766 12,000 3/8" (10 mm) 8 5   ACCESSORIESACCESSORIES 172  Hook -Face Gear-Driven Sanding Pads   Premium Urethane • Medium Density •  Perfectly Weight-Mated for Dynabrade Tools   4 screw-mount system on model numbers 57306-57315  •  5 screw-mount system on model numbers 57441-58446 6 screw-mount system on original aluminum housing tool design   Hook-Face Pads  Short nap pads for use with  reattachable discs.   Non-Vacuum Pads  High quality back-up pad. Weight-mated for smooth running and minimal tool vibration.   Vacuum Pads  Vacuum holes are precisely located to achieve proper alignment with abrasive discs for optimum vacuum capabilities.   Channel Vacuum Pads  3 mm (1/8") deep recessed channel.  No need to align vacuum holes to  pad holes.   Channel Vacuum Pads   Non-Vacuum Pads   Pad Diameter Part Number Max. RPM Thickness Screws  57386 10,000 3/8" (10 mm) 6  5" (127 mm) 57760 12,000 3/8" (10 mm) 5 57770 12,000 3/8" (10 mm) 4 57773 12,000 3/8" (10 mm) 4  6" (152 mm) 57387 10,000 3/8" (10 mm) 6 57764 12,000 3/8" (10 mm) 5   8" (203 mm) 56236 10,000 1/2" (13 mm) 5   Vacuum Pads   Pad Diameter Part Number Max. RPM Thickness Holes Screws  57775 12,000 3/8" (10 mm) 6 4  6" (152 mm) 57388 10,000 3/8" (10 mm) 8 6 57765 12,000 3/8" (10 mm) 6 5   8" (203 mm) 56237 10,000 1/2" (13 mm) 8 5   Wet Dynafine® Sanding Pads   3/8" (10 mm) Thick, Medium Density Pads   Pads mount with two screws   Vinyl-Face Pads  Ideal for PSA-type disc adhesion. Remove abrasive adhesive paper liner and press abrasive to vinyl-face sanding pad.    Hook-Face Pads  Short nap pads for use with reattachable discs.   Loop-Face Pads  Pads accept 3M™  Hookit™ IIabrasives.   Round Non-Vacuum Pads   Pad Dimensions Part Number Face Nap  58025 Loop –  2" (51 mm) Dia.  58030 Vinyl – 58031 Hook Short 58026 Loop –  3" (76 mm) Dia.  58032 Vinyl – 58033 Hook Short   NEW!NEW!   NEW!NEW!   NEW!NEW!   2006 Ind Cat_Accessories:2006 Industrial Catalog.qxd  9/27/06  5:29 PM  Page 172     ACCESSORIESACCESSORIES   173  Dynafine® Sanding Pads    3/8" (10 mm) Thick, Medium Density Pads   Vinyl-Face Pads  Ideal for PSA-type disc adhesion.  Remove abrasive adhesive paper liner and press abrasive to vinyl-face sanding pad. Quick disc removal.   Hook-Face Pads  Short nap pads for use with reattachable discs. Long nap pads for use with non-woven nylon discs.   Loop-Face Pads  Pads accept 3M™  Hookit™ IIabrasives.   Short nap Long nap   Fit all Dynafine® sanders • Pads mount with two screws   Dynafine® Backsplash Sanding Pads    Excellent for Fabricating Solid Surface Coved Backsplashes   Choose from radius and reverse radius pads   Triangular Non-Vacuum Pads   Pad Dimensions Part Number Face Nap   2-7/8" (73 mm) x  57950 Vinyl –   3-1/8" (79 mm) 57951 Hook Short 57955 Hook Long   Round Non-Vacuum Pads   Pad Dimensions Part Number Face Nap  2" (51 mm) Dia.  58025 Loop –   3" (76 mm) Dia.  58026 Loop –   Tear Drop Non-Vacuum Pads   Pad Dimensions Part Number Face Nap   3-3/4" (95 mm) x  57952 Vinyl –   2-3/8" (60 mm) 57953 Hook Short 57954 Hook Long   Raised Panel Non-Vacuum Pad   Pad Dimensions Part Number Face Nap  4" (102 mm) x  57956 Hook Short 3/4" (19 mm)   NOTE: If necessary, order Complete Raised Panel Pad Assembly,  Part Number 98293 (includes pad, mounting plate and two screws)   NEW!NEW!   NEW!NEW!   Radius Non-Vacuum Pads   Radius Dimension Part Number Face   1/4" (6 mm) 58020 Vinyl   3/8" (10 mm) 58021 Vinyl   1/2" (13 mm) 58022 Vinyl   5/8" (16 mm) 58023 Vinyl   Reverse Radius Non-Vacuum Pad   Radius Dimension Part Number Face   3/4" (19 mm) 58024 Vinyl   2006 Ind Cat_Accessories:2006 Industrial Catalog.qxd  9/27/06  5:29 PM  Page 173     Vinyl-Face Pads  Ideal for PSA-type disc adhesion. Remove abra- sive adhesive paper liner and press abrasive to vinyl-face sanding pad.  Quick disc removal.   Hook-Face Pads  Short nap pads for use with reattachable discs. Long nap pads for use with non-woven nylon discs.   Non-Vacuum Pads  High quality back-up pad. Weight-mated for smooth running and minimal tool vibration.   Vacuum Pads  Vacuum holes are precisely located to achieve proper alignment with abrasive discs for optimum vacuum capabilities.   Channel Vacuum Pads  3 mm (1/8") deep recessed channel.  No need to align vacuum holes to pad holes.   Non-Vacuum Pads   Pad Dimensions Part Number Face Nap Screws  57850 Vinyl – 4 3-2/3" (93 mm) x 57851 Hook Short 4 7" (178 mm) 57852 Hook Long 4   Vacuum Pads   Pad Dimensions Part Number Face Nap Screws  3-2/3" (93 mm) x  57855 Vinyl – 4  7" (178 mm) 57856 Hook Short 4   Channel Vacuum Pads   Pad Dimensions Part Number Face Nap Screws  3-2/3" (93 mm) x  57870 Vinyl – 4  7" (178 mm) 57871 Hook Short 4   Dynabug® Sanding Pads    3/8" (10 mm) Thick, Medium Density Pads   Pads mount with four screws   Short nap Long nap   11" (278 mm) File Board Sanding Pads    3/8" (10 mm) Thick, Medium Density Pads   Pads mount with two screws   Vinyl-Face Pads  Ideal for PSA-type disc adhesion.  Remove abrasive adhesive paper liner and press abrasive to vinyl-face sanding pad.  Quick disc removal.   Hook-Face Pads  Short nap pads for use with  reattachable discs. Long nap pads for use with  non-woven nylon discs.   Short nap Long nap   Non-Vacuum Pads   Pad Dimensions Part Number Face Nap   2-3/4" (70 mm) x  57511 Vinyl –   11" (278 mm) 57513 Hook Short 57514 Hook Long   Non-Vacuum Pad with Clips   Pad Dimensions Part Number Face Nap  2-3/4" (70 mm) x  57512 Vinyl – 11" (278 mm)   ACCESSORIESACCESSORIES 174   2006 Ind Cat_Accessories:2006 Industrial Catalog.qxd  9/27/06  5:30 PM  Page 174     ACCESSORIESACCESSORIES   175  Dynabug® “Model T” Sanding Pads    Balanced and Weight-Mated to Dynabrade Tools   All pads: 20,000 RPM max. operating speed  •  All pads mount with four screws (except P/N 57999 - mounts with clips)    Wet Dynabug® “Model T” Sanding Pads   Hook-Face Balanced and Weight-Mated Sanding Pads   All pads: 20,000 RPM max. operating speed  •  All pads mount with four screws   Vinyl-Face Sanding Pads Hook-Face Sanding Pads   Non-Vacuum Pads   Pad Dimensions Part Number Thickness Density   5" (127 mm) Dia. 56246 5/8" (16 mm) Soft 56249 3/8" (10 mm) Medium   6" (152 mm) Dia. 56269 3/8" (10 mm) Medium 56287 5/8" (16 mm) Soft   4" (102 mm) W x  4-5/16" (110 mm) L 57999 1/4" (6 mm) Medium  with Clips   4-1/4" (108 mm) W x 56244 3/8" (10 mm) Medium  4-1/2" (114 mm) L 56245 5/8" (16 mm) Soft   Non-Vacuum Pads   Pad Dimensions Part Number Thickness Density   5" (127 mm) Dia. 56247 5/8" (16 mm) Soft 56248 3/8" (10 mm) Medium   6" (152 mm) Dia. 56268 3/8" (10 mm) Medium 56288 5/8" (16 mm) Soft   4-1/4" (108 mm) W x 57996 5/8" (16 mm) Soft  4-1/2" (114 mm) L 57998 3/8" (10 mm) Medium   Vacuum Pads   Pad Dimensions Part Number Holes Thickness Density  5" (127 mm) Dia. 58086 5 13 mm (1/2") Medium   6" (152 mm) Dia. 58093 6 13 mm (1/2") Medium   4-1/4" (108 mm) W x 56292 6 3/8" (10 mm) Medium   4-1/2" (114 mm) L 56294 6 5/8" (16 mm) Soft 56285 6 5 mm (3/16") Medium   Vacuum Pads   Pad Dimensions Part Number Holes Thickness Density  5" (127 mm) Dia. 58086 5 13 mm (1/2") Medium   6" (152 mm) Dia. 58093 6 13 mm (1/2") Medium   Vacuum Pads   Pad Dimensions Part Number Holes Thickness Density   4-1/4" (108 mm) W x 56286 6 1/4" (6 mm) Medium   4-1/2" (114 mm) L 56291 6 3/8" (10 mm) Medium 56293 6 5/8" (16 mm) Soft   Vinyl-Face Pads  Ideal for PSA-type disc adhesion. Remove abrasive adhesive paper liner and press abrasive to  vinyl-face sanding pad. Quick  disc removal.   Hook-Face Pads  Short nap pads for use with reattachable discs.   Hook-Face Pads  Short nap pads for use with reattachable discs. Pads feature channels from vacuum holes to feed water through the sanding pad.   2006 Ind Cat_Accessories:2006 Industrial Catalog.qxd  9/27/06  5:30 PM  Page 175     ACCESSORIESACCESSORIES   176 Dynabug® II Sanding Pads    3/8" (10 mm) Thick, Medium Density Pads   Pads mount with four screws   Vinyl-Face Pads  Ideal for PSA-type disc adhesion. Remove  abrasive adhesive paper liner and press abrasive to vinyl-face sanding pad. Quick disc removal.   Hook-Face Pads  Short nap pads for use with reattachable discs.   Loop-Face Pads  Pads accept 3M™  Hookit™ IIabrasives.   Non-Vacuum Pads  High quality back-up pad. Weight-mated for smooth running and minimal  tool vibration.   Vacuum Pads  Vacuum holes are precisely located to achieve proper alignment with abrasive discs for optimum vacuum capabilities.   Vacuum Pads   Pad Dimensions Part Number Vacuum Holes Face  68 mm (2-3/4") x  56324 8 Loop 196 mm (7-3/4") 3" (74 mm) x  56316 8 Hook  4-1/4" (109 mm) 56356 8 Vinyl   3-1/4" (80 mm) x  56318 8 (4+4) Hook   130 mm (5") 56319 8 Hook 56359 8 Vinyl   3-7/8" (99 mm) x  56323 7  Hook 5-5/8" (143 mm) “Delta-Style”   Non-Vacuum Pads   Pad Dimensions Part Number Face  2-2/3" (68 mm) x  56354 Vinyl 6-7/8" (175 mm) 3" (74 mm) x  56315 Hook  4-1/4" (109 mm) 56355 Vinyl   3-1/4" (80 mm) x 56317 Hook  5" (130 mm) 56357 Vinyl   4-1/4" (108 mm) x  56330 Vinyl  4-1/2" (114 mm) 56331 Hook   8 Holes 8 (4+4) Holes “Delta-Style”   NEW!NEW!   NEW!NEW!   2006 Ind Cat_Accessories:2006 Industrial Catalog.qxd  9/27/06  5:30 PM  Page 176     ACCESSORIESACCESSORIES   177   Vinyl-Face Pads  Ideal for PSA-type disc adhesion.  Remove abrasive adhesive paper  liner and press abrasive to vinyl- face sanding pad. Quick disc removal.   Hook-Face Pads  Short nap pads for use with reattachable discs. Long nap pads for use with non-woven nylon discs.   Loop-Face Pads  Pads accept 3M™  Hookit™ IIabrasives.   Short nap Long nap   NEW!NEW!   Non-Vacuum Pads   Pad Dimensions Part Number Face Nap Screws  57454 Vinyl – 2 2-3/4" (70 mm) x 57456 Hook Short 2 8" (203 mm) 57471 Hook Long 2 57850 Vinyl – 2 3-2/3" (93 mm) x 57851 Hook Short 2 7" (178 mm) 57852 Hook Long 2   Non-Vacuum Pad with Clips   Pad Dimensions Part Number Face  2-3/4" (70 mm) x  57460* Vinyl – 2 8" (203 mm)   Vacuum Pads   Pad Dimensions Part Number Face Nap Vacuum Holes  2-3/4" (68 mm) x  56324 Loop – 8 7-3/4" (196 mm) 2-3/4" (70 mm) x  57455 Vinyl – 6  8" (203 mm) 57457 Hook Short 6   3-2/3" (93 mm) x  57855 Vinyl – 10  7" (178 mm) 57856 Hook Short 10   NEW!NEW!   Dynaline Sanding Pads    3/8" (10 mm) Thick, Medium Density Pads   Pads mount with two screws   Dynaline Contoured Sanding Pads    Premium Urethane, Medium Density Pads   Pads mount with two screws   Channel Vacuum Pads   Pad Dimensions Part Number Face Nap Screws  3-2/3" (93 mm) x  57870 Vinyl – 4  7" (178 mm) 57871 Hook Short 4   Specialty Pads   • Vinyl-face.  • Accept 2-3/4" (70 mm) wide x 8" (203 mm) long PSA  abrasive sheets.  Part Number 57458 Part Number 57462  • Backsplash pad. • “Bull-nose” pad.   2006 Ind Cat_Accessories:2006 Industrial Catalog.qxd  9/27/06  5:30 PM  Page 177     ACCESSORIESACCESSORIES   178   Soft Density Sanding Pads Foam-Backed Sanding Pads   Hook-Face Pads  Short nap pads  for use with reattachable discs.   Foam Backing  Soft, dual density bonded dual action pad for use on curved and contour surfaces.   Rubber-Face  For use with PSA and screen abrasives.   Non-Vacuum Pads  Pad Part MOS Mounts  Diameter Number (RPM) Face with Thickness   6" (152 mm) 50828 3,200 Rubber 5/8"-11  1-1/4" (32 mm)Female Thread 50829 3,200 Rubber 5/8"-11  1-1/4" (32 mm) 8" (203 mm) Female Thread 54337 1,500 Hook 5 Screws 1" (25 mm)   NOTE: Part Number 54337 is weight-mated to Model 58445  (8" Gear-Driven Orbital Sander)  Wet/Dry Sander Disc Pads Short Nap Hook-Face Pads   For Use With 127 mm - 203 mm Dia. Wet/Dry Sanders   Rigid Backing  For finishing flat surfaces with non-woven nylon abrasive discs.   Urethane  Pads are long tapered with an extremely flexible edge for sanding contours.   Foam Backing  Soft, dual density bonded dual action pad for use on curved and contour surfaces.   Non-Vacuum   Pad Diameter Part Number Type MOS RPM Thread  4"-5"  50146 Rigid 6,000 1/4"-20 Female  (102-127 mm) 50147 Rigid 6,000 3/8"-24 Female 50155 Rigid 10,000 5/8"-11 Female  5" (127 mm) 50884 Rigid 10,000 M14 x 2 57544 Urethane 4,800 5/8"-11 Female 6" (152 mm) 50946 Foam 3,200 5/8"-11 Female 57545 Urethane 4,800 5/8"-11 Female 7-1/4" (184 mm) 50853 Foam 3,200 5/8"-11 Female 50854 Foam 3,200 M14 x 2 8" (203 mm) 50947 Foam 3,200 5/8"-11 Female   Part Thread Number Size  50120 1/4"-20 Female 50122 3/8"-24 Female   Foam Backing   Part Thread Number Size  50125 1/4"-20 Female 50126 3/8"-24 Female   Rigid Backing   Part Number Face  54486 Vinyl 54488 Hook   Soft Urethane Soft Urethane  • 3-1/2" (89 mm) pads have loop-facing to mount to rigid backing pads (P/N 50125 and P/N 50126).   • 5,000 RPM maximum.   Mini-Dynorbital® Disc Pads Rigid and Foam Backing  • 3" (76 mm) dia. pads are compatible with angle-head and palm-style Mini-Dynorbital ®  sanders; Angle-Head Buffers.   • Hook-face pads accept reattachable abrasive discs as well as polishing buff pads.   • 5,000 RPM maximum.   2006 Ind Cat_Accessories:2006 Industrial Catalog.qxd  9/27/06  5:30 PM  Page 178     ACCESSORIESACCESSORIES   179   Hook-Face Polishing Pads For Use With Dynabuffers and Polishers   Yellow Foam  Cutting - foam cells are larger and further apart than White Foam cells making the action more aggressive.   White Foam  Polishing - foam cells are smaller and closer together than Yellow Foam cells making the action less aggressive.   Orange Waffle Foam  Use during compounding stage to remove swirl and haze marks.   Terry Cloth  Application and removal of waxes and polishes.   Synthetic Wool  Final finishing and polishing.   Natural Sheepskin  Final finishing and polishing; softer feel than synthetic wool.   Non-Vacuum   Pad Diameter Part Number Description Type Color  90027 Terry Cloth Polishing White 90028 Synthetic Wool Polishing White  3" (76 mm) 90038 Foam Flat Polishing White 90044 Foam Flat Cutting Yellow 90080 Natural Sheepskin  Polishing White 3-1/4" (83 mm) 90070 Foam Waffle  Polishing Orange 3-1/2" (89 mm) 90034 Natural Sheepskin  Polishing Tan 3-3/4" (95 mm) 90071 Foam Waffle  Polishing Orange 90036 Natural Sheepskin  Polishing Tan 5" (127 mm) 90040 Foam Flat  Polishing White 90045 Foam Flat  Cutting Yellow 90081 Natural Sheepskin  Polishing White 5-1/4" (133 mm) 90063 Foam Waffle  Polishing Orange   54330* Foam Flat  Polishing Yellow 6" (152 mm) 90046 Foam Flat  Cutting Yellow 90047 Foam Flat  Polishing White 7" (178 mm) 90082 Natural Sheepskin  Polishing White   *NOTE: Part Number 54330 has 5/16"-24 male thread   Random Orbital Head Kit   No More Swirls!   Part Number 61374 Part Number 61375 5/8"-11 Female Thread M14x2 Female Thread   • Mount to tool motors up to 3,200 RPM.  • Kit includes: - Random Orbital Polishing Head - 50855 Hook-Face Backing Pad  (7" [178 mm]) diameter - 90082 Natural Sheepskin Polishing Pad  (7" [178 mm]) diameter - 50679 Wrench (26 mm), 95823 Wrench (21 mm) and 95281 Wrench (19 mm).   Convert your standard rotary tool into a random orbital polisher   2006 Ind Cat_Accessories:2006 Industrial Catalog.qxd  9/27/06  5:31 PM  Page 179     Part Number 97161   • Optional lightweight hanger easily attaches to all of Dynabrade’s Right Angle Mini-Orbital Sanders.   Mini-Dynorbital Sanding Heads Greatly Enhance the Versatility of Your Mini-Dynorbital ® Sander   Part Number Max. RPM Material Density Face Thread  54017 12,000 Foam Medium Rubber 1/4"-20 Female 54085 12,000 Foam Very Soft Vinyl 1/4"-20 Female 54087 15,000 Foam Soft Vinyl 1/4"-20 Female 54089 7,500 Nylon Hard Hook 1/4"-20 Female  NOTE: To mount pads that have 1/4"-20 female thread directly to tool for  conventional rotary action, use 54021 Adapter   Mini-Dynorbital Sanding Pads Greatly Enhance the Versatility of Your Mini-Dynorbital ® Sander   Hook-Face P/N 54090  • 7,500 RPM maximum.  • For use with reattachable discs.   Medium, Dual Density P/N 54018  • 12,000 RPM maximum.  • For wet sanding operations.   • 6 mm thick sponge, 60 durometer rubber.   Medium, Single Density P/N 54084  • 15,000 RPM maximum.  • For wet sanding operations.   • Single density, 8 mm thick sponge.   Soft Density P/N 54088  • 15,000 RPM maximum.  • 6 mm thick sponge, vinyl-face.   Roloc is a registered trademark of 3M Company   Tool Connection For 1/4"-20 Female Thread Pads  • Accepts 76 mm (3") and smaller diameter sanding pads with 1/4"-20 female thread.   Part Number Tool Connection Pad Connection  54028 1/4"-28 Male 1/4"-20 Male 54034 3/8"-24 Female 1/4"-20 Male 54476 1/4"-20 Female 1/4"-20 Male   Part Number Tool Connection Pad Connection  54029 1/4"-28 Male Locking-Type Female Thread 54035 3/8"-24 Female Locking-Type Female Thread 54030* 1/4"-28 Male Locking-Type Female Thread  * For Rotary Sanding   For Male Locking-Type Thread Pads  • Accepts 76 mm (3") and smaller dia. sanding pads with male locking-type threads such as  3M Roloc.   Pad Connection   Tool Connection Pad Connection   19 mm  (3/4") Dia. Sanding Pads   Part Number Max. RPM Material Density Face Thread  54018 12,000 Foam Medium Rubber 1/4"-20 Female 54031 5,000 Nylon Soft Vinyl Locking-Type 54033 5,000 Nylon Medium Rubber Locking-Type 54084 15,000 Urethane Soft Vinyl 1/4"-20 Female 54086 12,000 Foam Very Soft Vinyl 1/4"-20 Female 54088 15,000 Foam Soft Vinyl 1/4"-20 Female 54090 7,500 Nylon Hard Hook 1/4"-20 Female  NOTE: To mount pads that have 1/4"-20 female thread directly to tool for  conventional rotary action, use 54021 Adapter   32 mm (1-1/4") Dia. Sanding Pads   Hanger For use with Right Angle Mini-Orbital Sanders   Hanger Attaches to Tool for Convenient Workplace Storage   ACCESSORIESACCESSORIES 180   2006 Ind Cat_Accessories:2006 Industrial Catalog.qxd  9/27/06  5:31 PM  Page 180     ACCESSORIESACCESSORIES   181  Disc Sanding Pads and Assemblies Abrasive Discs and Buffing Accessories   Use Tool RPM and Abrasive Manufacturer’s Maximum Operating Speed as your Guidelines for Compatibility   Use tool RPM and abrasive manufacturer’s maximum  operating speed as your guidelines for compatibility  Use tool RPM and abrasive manufacturer’s maximum operating speed as your guidelines for compatibility   Disc Pad Assembly    Part Number 50111 2" (51 mm) Dia. Pad  • Includes 50107 PSA Disc Pad and 50103 Pad Adapter (converts 1/4"-20 female thread to 1/4" dia. shank for use with collets and chucks).   For PSA-Type Discs    2" (51 mm) Dia. Pads   • Easy application and removal of disc. Remove the disc’s liner to reveal a pressure-sensitive adhesive coating. Peel the old disc off the pad and press on the new disc!   For Locking-Type Discs   2" (51 mm), 3" (76 mm) and  4" (102 mm) Dia. Pads   • A quick turn of the disc locks it into place.   • 2" (51 mm) and 3" (76 mm) dia. pads include 50103 Pad Adapter to convert  1/4"-20 female thread to 1/4" dia. shank for use with collets and chucks.   Pad Part Pad MOS Diameter Number RPM Thread Density   2" (51 mm) 51344* 30,000 1/4"-20 Female  Medium 51345 30,000 3/8"-24 Female  Medium   3" (76 mm) 51346* 20,000 1/4"-20 Female  Medium 51347 20,000 3/8"-24 Female  Medium   4" (102 mm) 50191 12,000 3/8"-24 Female  Medium 50192 12,000 3/8"-24 Female  Hard * Includes 50103 Pad Adapter to convert 1/4"-20 female  thread to 1/4" dia. shank for use with collets and chucks   Pad Part Pad MOS Diameter Number RPM Thread Density  50288 13,000 5/8"-11 Female Hard   4-1/2" (114 mm) 50289 13,000 3/8"-24 Female Hard 51148 13,000 5/8"-11 Female Medium 51149 13,000 3/8"-24 Female Medium   5" (127 mm) 50296 12,000 5/8"-11 Female Hard 51150 12,000 5/8"-11 Female Medium   7" (152 mm) 50297 8,500 5/8"-11 Female Hard 51151 8,500 5/8"-11 Female Medium   Pad Part Pad MOS Diameter Number RPM Thread Density  4-1/4" (108 mm) 50267 25,000 5/8"-11 Female Hard   Pad Part Pad MOS Diameter Number RPM Thread Density   2" (51 mm) 50107 20,000 1/4"-20 Female  Medium 50109 20,000 3/8"-24 Female  Medium   Disc Sander Backing Pads 4-1/2" (114 mm), 5" (127 mm) and 7" (178 mm) dia.  • Accepts abrasive discs with 7/8" (22 mm) center hole.   • Fins help expel heat from disc pad extending disc life.   • Flange nut included.   Fibre Disc Phenolic Backing Pad 4-1/4" (108 mm) dia.  • Accepts slotted center hole abrasive discs.   • 5/8"-11 female thread.   2006 Ind Cat_Accessories:2006 Industrial Catalog.qxd  9/27/06  5:41 PM  Page 181     Pneumatic Wheels Inflatable Rubber Wheels   Conform to Contour of Work Surface   DynaWheel Pneumatic Wheels For Stock and Weld Removal   Heavy Duty Wheel for Variety of Applications   ACCESSORIESACCESSORIES 182   Standard Wheels  • For general finishing jobs.  • 1/8" thick natural, 65 durometer rubber.   Heavy Duty Wheels  • When you need a more aggressive wheel for more stock removal.  • 1/4" thick natural, 65 durometer rubber.  • Extremely durable - when used properly wheel is very resistant to gouging.   Universal Arbor  • Pneumatic wheels with a universal arbor include three reducer bushings (1/2", 5/8", 3/4") to greatly increase the wheel compatibility.   Dynabrade pneumatic wheels are inflatable rubber wheels designed to run on various Dynabrade tools   When fitted with an abrasive belt and inflated to the desired firmness, our pneumatic wheels are ideal for countless grinding and finishing applications.   Dynabrade pneumatic wheels support coated abrasive and non-woven nylon belts for use on metal, wood, plastic, ceramic, fiberglass and composites.    Composite Hub  • Molded; lightweight design.  • Available with standard construction rubber wheels only.   Heavy Duty Aluminum Hub  • Precision machined for balance run-out and thread quality.  • Easily replace rubber wheel.  • Available with both wheel construction types.   NOTE: Speed of tool must not exceed maximum operating speed of accessory   Dimensions Part Hub Wheel Wheel Belt Size Maximum Diameter x Width Number Composition Arbor Hole Part Number Type Width x Length RPM  92921 Aluminum 5/8" - 11 Thread 92922 Composite 5/8" - 11 Thread 5" x 1" 92923 Aluminum Universal 1/2",  92908 Heavy Duty 1" x 15-1/2" 4,5005/8" or 3/4" Bore 92924 Composite Universal 1/2",  5/8" or 3/4" Bore 92867 Aluminum 5/8"-11 Thread 92868 Composite 5/8"-11 Thread 5" x 1-1/2" 92928 Aluminum Universal 1/2",  92665 Heavy Duty 1-1/2" x 15-1/2" 4,5005/8" or 3/4" Bore 92929 Composite Universal 1/2",  5/8" or 3/4" Bore 92931 Aluminum 5/8"-11 Thread 92932 Composite 5/8"-11 Thread 5" x 2" 92933 Aluminum Universal 1/2",  92666 Heavy Duty 2" x 15-1/2" 4,5005/8" or 3/4" Bore 92934 Composite Universal 1/2",  5/8" or 3/4" Bore   Recommended Dynabrade Tools   13214, 13523 1/2": 13206/507 5/8": 13207/508 13214, 13523 1/2": 13206/507 5/8": 13207/508 13214, 13523 1/2": 13206/507 5/8": 13207/508   1/2" 5/8" 3/4"   DynaPump Air Pump Assembly Included with each DynaWheel and Dynacushion ®Pneumatic Wheel   2006 Ind Cat_Accessories:2006 Industrial Catalog.qxd  9/27/06  5:42 PM  Page 182     Dynacushion® Pneumatic Wheels For Finishing and Blending   Conform to Contour of Work Surface   ACCESSORIESACCESSORIES 183   Dimensions Part Hub Wheel Wheel Belt Size Max. Dia. x W No. Composition Arbor Hole Part No. Type W x L RPM   2-1/4" x 3"  92858  Aluminum  1/2"-13 Thread  94433 Standard 3" x 7-3/8" 9,000 94432 5/8"-11 Thread 92846 1/2"-13 Thread 92643 Standard  3" x 2-1/4" 92847 Aluminum 5/8"-11 Thread 2-1/4" x 9-3/4" 7,000 92848 1/2"-13 Thread 92644 Heavy Duty 92849 5/8"-11Thread 92824 1/2"-13 Thread 92646 Standard 92825 Aluminum 5/8"-11 Thread 92827 1/2"-13 Thread 92647 Heavy Duty 3-1/4" x 3"  92828 5/8"-11 Thread 3" x 10-11/16" 7,000 94507 Composite 5/8" Bore  94500 Standard 94508 5/8"-11 Thread 94495 Composite 3/4" Bore w/ 94480 90 mm x  Key Slot Standard  100 mm x 289 mm 7,000100 mm  92863 Aluminum 19 mm w/ 926516 mm Slot 3-1/4" x 7"  94434 Aluminum 5/8"-11 Thread 94435 Standard  7" x 10-11/16" 3,600 92811 Aluminum 5/8"-11 Thread 94492 Composite 5/8"-11 Thread 5" x 2-3/4"  92935 Aluminum Universal 1/2",  94482 Standard 2-3/4" x 15-1/2" 3,5005/8" or 3/4" Bore 92936 Composite Universal 1/2",  5/8" or 3/4" Bore 92801 Aluminum 5/8"-11 Thread 94481 Standard  94472 Composite 92805 5/8"-11 Thread 92656 Heavy Duty 5" x 3-1/2"  92803 Aluminum M14 x 2 Thread 3-1/2" x 15-1/2" 3,500 92937 Aluminum Universal 1/2",  5/8" or 3/4" Bore 94481 Standard  92938 Composite Universal 1/2",  5/8" or 3/4" Bore 8-1/4" x 9"  94450 Aluminum 1-1/4" 94451 Standard  9" x 26-5/16" 1,800   Recommended Dynabrade Tools   Not applicable 13204, 13505, 13509, 13515,  13519, 13520 Not applicable 13204/205/209, 13515/519/520 Not applicable 13204/205/209, 13515/519/520 Not applicable 13204, 13505, 13515, 13520 Not applicable 13204, 13505, 13515, 13520 13101/102, 13202/205/207, 13300, 13503/506/508/516/518 13204, 13505, 13515, 13520 13401, 13450 Not applicable 58050 13204, 13505/515/521/531 1/2": 13206/507 5/8": 13207/508 13204, 13505, 13515,  13521, 13531 Not applicable 1/2": 13206/507 5/8": 13207/508 Not applicable   Air Pump Assembly  Part Number 98091  • Easy slide pump; no compressor needed. Included with each DynaWheel and Dynacushion ® Pneumatic Wheel NOTE: Speed of tool must not exceed maximum operating speed of accessory   2006 Ind Cat_Accessories:2006 Industrial Catalog.qxd  9/27/06  5:42 PM  Page 183     Dynacushion® Inflation Devices  and Accessories Slotted Wheels Grind, Deburr and Blend on all Metals   Centrifugal Force Expands the Wheel to Grip the Abrasive   ACCESSORIESACCESSORIES 184   Dimensions Part Band Size Diameter x Width Number Width x Length Maximum RPM Recommended Dynabrade Tools  1" x 1"  92910 1" x 1" 1" x 1-1/2" 92911 1" x 1-1/2" 10,000-12,000 52666, 52676 1" x 2" 92912 1" x 2" 1-1/2" x 1"  92913 1-1/2" x 1"  1-1/2" x 1-1/2" 92914 1-1/2" x 1-1/2"  6,000-10,000 52664, 52674, 52665, 52685 1-1/2" x 2" 92915 1-1/2" x 2" 2"x 1" 92916 2" x 1" 2" x 1-1/2" 92917 2" x 1-1/2" 4,500-7,500 51202, 51212, 52102, 52663, 52673, 52664, 52674 2" x 2" 92918 2" x 2"   • One-piece construction.  • Slots provide air flow that enables the wheel to run cooler than solid rubber.  • 65 durometer natural rubber with 1/4" cold rolled steel shank for excellent concentricity.  • Specially designed for use with spiral bands.   Wheel Inflation Tool  Part Number 94465  • Controlled inflation for valve assemblies that  are flush with the hub surface.  • 1/4" female NPT.  • 95633 Nozzle replacement available.   Dynastraight ® Wheel Shields  Part Number 13032  • For wheels up to 8" dia. x  2" wide.  • Built-in handle.   Part Number 13033  • For wheels up to 5" diameter.  • Built-in handle.   Dynacushion ® Pneumatic Wheel Kits  Part Number 94478  • Includes: 94473 Dynacushion® Pneumatic Wheel (5" dia. x 3-1/2" wide, composite hub,  3/4" bore), coarse 3M ™  ScotchBrite™ belt and  80-grit Dynacut belt.   Part Number 94479  • Includes: 94472 Dynacushion®  Pneumatic Wheel (5" dia. x 3-1/2" wide, composite hub, 5/8"-11 thread), coarse 3M™ ScotchBrite™ belt and 80-grit Dynacut belt.   Low Pressure Air Chuck  Part Number 98130  • Controlled inflation for hard-to-reach  valve assemblies.  • 1/4" female NPT.   2006 Ind Cat_Accessories:2006 Industrial Catalog.qxd  9/27/06  5:42 PM  Page 184     ACCESSORIES ACCESSORIES   185  Dynaflex Expander Wheels Grind, Deburr and Blend on all Metals   Excellent for Weld Removal and Heavy Deburring or Grinding on the Inside of Pipes and Tanks   • Expander wheels expand as they rotate. The simplest, most cost-effective method for holding abrasives on a back-up wheel.  • Air flow behind the flexer enables the wheel to run cooler than solid rubber.  • Features added flexibility so the wheel cuts fast, but won’t gouge.  • Expander wheels use abrasive bands. Bands are an abrasive belt with a liner on the inside for more durability and cutting action.   • Use with our Dynastraight ® line of portable tools.  • Ideal for heavy duty applications; grinding, deburring, and rough blending of all metals.  • Coated alumina zirconia and non-woven nylon abrasive bands are  available for heavy stock removal and finishing. ADDITIONAL SPECIFICATIONS: Arbor Length = wheel width + 1/2"   Dimensions Part Arbor Replacement Replacement Band Size Maximum Recommended  Dia. x Width Number Hole Hub Flexer Dia. x Width RPM Dynabrade Tools  3" x 1" 94560 97252 94578 3" x 1" 13509, 13519, 13520 3" x 2" 94561 5/8"-11 Female 97256 94579 3" x 2" 4,500 3" x 3"  92875 97258 97280 3" x 3" N/A 5" x 1" 94564 5/8"-11 Female  97270 94580 5" x 1" 3,400-4,500 13204, 13505, 13515, 13520 5" x 2" 94565 97274 94581 5" x 2"   Bristle Width Part No. Grade Band Tip Type  1/2" (13 mm) 92244 Coarse Black Bent 3/4" (19 mm) 92245 Coarse Red Bent   Wheel Hub Assembly  Part Number 92284   • Assembly accepts both wire wheels and eraser wheels.   92257 Eraser Wheel with Hub   • 92255 Eraser Wheel with mated   92284 Wheel Hub Assembly.   Decal Removal Wheels  92255 Eraser Wheel   • Eraser wheel only; no hub included.   DynaZip Wheels and Hub Assembly For Use with DynaZip Surface Preparation Tool   Allows Efficient Surface Preparation and Decal Removal   NOTE: Speed of tool must not exceed maximum operating speed of accessory   4" (102 mm) Diameter Wire Wheels  • All wire wheels have band width of 3/4" (19 mm).  NOTE: Wire wheels only;   no hub included.   2006 Ind Cat_Accessories:2006 Industrial Catalog.qxd  9/29/06  3:31 PM  Page 185     ACCESSORIESACCESSORIES   186 Arbors Use to Mount Abrasive Wheels, Discs, Pneumatic Wheels, etc.   Tool Spindle Part Number Arbor Thread Arbor Bore Wheel Width   13061 –  5/8"  Up to 2-1/2" 3/8"-24 Male  1" 13074 –  5/8"  Up to 3" 1" 13014 – 14 mm Up to 51 mm 13016 – 1/2" Up to 2" 1/2"-20 Male   13017 – 5/8" Up to 2" 13071 –  5/8"  Up to 3" 1" 13074 –  5/8"  Up to 3" 1" 13015 5/8"-11 Male – 3-1/2" 13073 –  5/8"  Up to 3" 5/8"-11 Male  1" 13074 –  5/8"  Up to 3" 1"   Use Dynabrade arbors to mount abrasive wheels, discs, stars and other accessories to male spindle tools   For use with many Dynabrade and other manufacturers’ portable tools and bench grinders. Mount abrasive wheels, discs, pneumatic wheels, sanding stars and other accessories to 3/8"-24, 1/2"-20 or 5/8"-11 male spindle tools by using the combination of spacers and flanges that suits your application.   Part Number 13074  Arbor Kit   • Mounts to 3/8"-24, 1/2"-20 AND 5/8"-11 male spindle sizes; also accepts any Dynacushion® or accessory which has 5/8" bore from 1/2" to 3" wide in 1/2" increments.    NOTE: Speed of tool must not exceed maximum operating speed of accessory   2006 Ind Cat_Accessories:2006 Industrial Catalog.qxd  9/27/06  5:42 PM  Page 186     Arbors Use to Mount Abrasive Wheels, Discs, Pneumatic Wheels, etc.  ACCESSORIESACCESSORIES 187   “Universal” Shank Arbor  • Handy accessory fits drills and die grinders!  • Mount sanding stars, flap wheels, unitized wheels, non-woven nylon wheels, buffs, etc.   • High quality steel arbor; all flanges and spacers included.   Part Number 12995  Arbor – 1/4" Shank Part Number 12977  Arbor  – 6 mm Shank   • Both arbors accept accessories up to 1" (25 mm) wide which have 1/2" (13 mm) dia. center hole.   Part Number 12980  Arbor – 3/8"-24 Female Thread   • Mounts to 3/8"-24 male spindle tools.   Most Aggressive/Less Flexible  Six stars, one spacer.  For heavier stock removal; work on flats, edges, larger surface areas, great for defuzzing hard woods.   Least Aggressive/Most Flexible  Two stars, up to ten spacers.  For light stock removal reaching into small holes, cut-outs, heavy contours, tight grooves; great for defuzzing soft woods.   Suggested Mounting Options for  Arbor Mount Sanding Stars  The spacing of stars on the arbor, as well as the grit, determine desired sanding aggressiveness. We suggest that the operator explore various grit and spacing combinations based on the following guidelines.   Threaded Mandrels For Use with 3M ™ Clean ’N Strip ™ Discs   Part Number 95722  • 1/4" diameter with 1/4" shank.  • For 3M™ Clean ’N Strip™ discs.   Part Number 95749  • 1/2" diameter with 1/4" shank.  • For 3M™ Clean ’N Strip™ discs.   Clean ’N Strip is a registered trademark of 3M Company   Drill Chucks With Mated Keys   Keys Included with all Drill Chucks   Chuck Size Thread Chuck Part No. Key Part No.  5/32" 5/16"-24 Female 53031 53051 1/4" 3/8"-24 Female 53032 53052 3/8" 1/2"-20 Female 53033 53053 3/8"-24 Female 53087 53053 1/2" 1/2"-20 Female 53034 53054   Wheel Mounting Adapter Kit Part Number 11399 Type 27 Wheel Mount   • For use with larger than  5" (127 mm) dia. Type 27 grinding wheels mounted on depressed center wheel grinders.  NOTE: Use only Type 27 reinforced depressed center wheels.   Disc Mount Assembly   Part Number 50263 4-1/2"–5" (114-127 mm) Dia. Discs   • 50264 Mount and 50268 Flange Nut have 5/8"-11 thread.  • Accepts discs with center hole.  • 1-3/4" (44 mm) diameter mount allows for maximum disc flexibility.   2006 Ind Cat_Accessories:2006 Industrial Catalog.qxd  9/27/06  5:42 PM  Page 187     ACCESSORIESACCESSORIES   188 Threaded Adapters   Threaded Adapters  NPT Threaded Adapters Collet-to-Thread Adapters   Part Number Exposed Threads Length  Wrench Flats 04117 M x 8 Female   –   3/8"-24 Male 19 mm (3/4") 12 mm 18908 M x 8 Female   –   3/8"-24 Male 35 mm (1-3/8") 11 mm 54021 1/4"-28 Male    –   1/4"-20 Male  30 mm (1-3/16") 14 mm 53181 3/8"-24 Male   –   1/2"-20 Male 25 mm (1") 19 mm 50149 3/8"-24 Female   –   M14 x 2 Male 25 mm (1") 19 mm 50106 3/8"-24 Female   –   1/4"-20 Male  27 mm (1-1/16") 14 mm 42636 3/8"-24 Female   –   3/8"-24 Male 25 mm (1") 9 mm 93696 3/8"-24 Female   –   3/8"-24 Male 25 mm (1") 17 mm 97103 3/8"-24 Female   –   1/2"-20 Male 51 mm (2") 16 mm 53549 3/8"-24 Female   –   1/2"-20 Male 51 mm (2") 16 mm 55064 3/8"-24 Female   –   5/8"-11 Male 25 mm (1") 17 mm 55034 3/8"-24 Female   –   5/8"-11 Male 35 mm (1-3/8") 17 mm 53652 3/8"-24 Female   –   5/8"-11 Male 38 mm (1-1/2") 24 mm 98050 3/8"-24 Female   –   5/8"-11 Male 51 mm (2") 3/4" 98085 3/8"-24 Female   –   5/8"-11 Male 64 mm (2-1/2") 3/4" 51029 3/8"-24 Female   –   1/4"-20 Female 38 mm (1-1/2") 16 mm 54039 3/8"-24 Female   –   5/16"-24 Female 25 mm (1") 17 mm 14081 1/2"-20 Female   –   5/8"-11 Male 44 mm (1-3/4") 19 mm 54040 5/8"-11 Female   –   5/16"-24 Female 41 mm (1-5/8") 19 mm 58058 5/8"-11 Female   –   5/8"-11 Male 51 mm (2") 19 mm 13060 5/8"-11 Female   –   5/8"-11 Male 102 mm (4") 19 mm   04117 18908 54021 53181 5010650149  93696 5354997103  42636 55064 55034 53652 98050 98085 51029 54039 14081 54040   58058 13060   Part Number Exposed Threads Shank Dia. Length  Wrench Flats 50103 1/4" Shank   –   1/4"-20 Male  1/4" 32 mm (1-1/4") 11 mm 51032 1/4" Shank   –   1/4"-20 Female  1/4" 38 mm (1-1/2") –   50103 51032   Part Number Exposed Threads Length  Wrench Flats 95713 1/4" NPT Female   –   1/8" NPT Male 25 mm (1") – 95714 3/8" NPT Female   –   1/4" NPT Male 32 mm (1-1/4") – 95394 1/2" NPT Female   –   3/8" NPT Male 44 mm (1-3/4") –   95713 95714 95394   User assumes all responsibility for using adapters safely   User assumes all responsibility for using adapters safely   User assumes all responsibility for using adapters safely   2006 Ind Cat_Accessories:2006 Industrial Catalog.qxd  9/27/06  5:43 PM  Page 188     ACCESSORIESACCESSORIES   189  Carbide Burrs and Carbide Burr Kits Grind, Deburr and Finish Stainless Steel and Other Metals 1/8" Dynaburr Carbide Burr Kit Part Number 93351   • 12 piece kit includes:  93338, 93339, 93340, 93341, 93342, 93343, 93344, 93345, 93346, 93347, 93348, 93349.  • Mounts to a 1/8" collet on any standard die grinder.  • Packaged in high-quality wooden case.  • All carbide burrs may be ordered separately (see below).   1/4" Dynaburr Carbide Burr Kit Part Number 93350   • Used for grinding, deburring, and finishing on stainless  steel and other metals.  • 8 piece kit includes:  93330, 93331, 93332, 93333, 93334, 93335, 93336, 93337.  • Mounts to a 1/4" collet on any standard die grinder.  • Packaged in high-quality wooden case.  • All carbide burrs may be ordered separately (see below).   1/8" and 3 mm Burrs Available   Shape Cylinder Cylinder Cylinder Cylinder Ball Oval Tree Tree Flame Taper 14 Degree 10 Degree Radiused Radiused  Radiused  Pointed Radiused  Cone Inverted  End End End End End Cone Tool Style SA-42 SA-43 SC-41 SC-42 SD-42 SE-41 SF-42 SG-44 SH-41 SL-42 SM-42 SN-42 Cut Style Double Double Double Double Double Double Double Double Double Double Double Double 1/8" Part No. 93338 93339 93340 93341 93342 93343 93344 93345 93346 93347 93348 93349  Cutter Dia. 3/32" 1/8" 3/32" 1/8" 1/8" 1/8" 1/8" 1/8" 1/8" 1/8" 1/8" 1/8" Flute Length 7/16" 9/16" 7/16" 9/16" 1/8" 7/32" 1/2" 1/2" 1/4" 1/2" 7/16" 3/16" Shank 1/8" 1/8" 1/8" 1/8" 1/8" 1/8" 1/8" 1/8" 1/8" 1/8" 1/8" 1/8"  3mm Part No. 93368 93369 93370 93371 93372 93373 93374 93375 93376 93377 93378 93379  Cutter Dia. 2.5 mm 3mm 2.5 mm 3mm 3 mm 3mm 3 mm 3mm 3 mm 3mm 3 mm 3mm Flute Length 11 mm 14 mm 11 mm 14 mm 3 mm 5.5 mm 13 mm 13 mm 6 mm 13 mm 11 mm 5 mm Shank 3 mm 3mm 3 mm 3mm 3 mm 3mm 3 mm 3mm 3 mm 3mm 3 mm 3mm   1/4" and 6 mm Burrs Available   Shape Cylinder Cylinder Cylinder Cylinder Ball Oval Tree Taper Radiused End Radiused End Radiused End Radiused End Tool Style SA-1 SA-3 SC-1 SC-3 SD-3 SE-3 SF-3 SL-3 Cut Style Double Double Double Double Double Double Double Double  1/4" Part No. 93330 93331 93332 93333 93334 93335 93336 93337  Cutter Dia. 1/4" 3/8" 1/4" 3/8" 3/8" 3/8" 3/8" 3/8" Flute Length 5/8" 3/4" 5/8" 3/4" 5/16" 5/8" 3/4" 1-1/16" Shank 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4"  6mm Part No. 93360 93361 93362 93363 93364 93365 93366 93367  Cutter Dia. 6 mm 9mm 6 mm 9mm 9 mm 9mm 9 mm 9mm Flute Length 16 mm 19 mm 16 mm 19 mm 8 mm 16 mm 19 mm 27 mm Shank 6 mm 6mm 6 mm 6mm 6 mm 6mm 6 mm 6mm   93351▲ 93350▲   2006 Ind Cat_Accessories:2006 Industrial Catalog.qxd  9/27/06  5:43 PM  Page 189     Collets and Inserts Increase the Utility of your Die Grinders, Drills and Other Air Tools   Terminology  • COLLET: Device used to hold carbide burrs, rotary files, mounted points and wheels, etc.  • BODY:The part of the collet that secures to the spindle of the tool and accepts the insert.  • CAP: Secures collet body and retains insert.  • INSERT:The collapsible portion of the collet that retains the shank of the inserted tool.   Collet Assembly Types   • TWO-PIECE: Insert threads into body.   • THREE-PIECE: Insert slips into body;  cap threads to body, retaining the insert.   • FOUR-PIECE: Insert slips into body;  cap slips over body; nut retains cap and insert.   • INTEGRATED: Collet is a necessary component to complete the  motor assembly.   CAP  INSERT  BODY   ACCESSORIESACCESSORIES 190   11000 01198  11450 CALL  11462 01711  11475 01711  11477 CALL  11480 01711  12200 53406  12201 53406  12202 53406  12203 53406  12204 53406  12205 53406  12206 53406  12207 53406  12250 02501  12252 02501  12254 02051  13100 53407  13101 53406 13102 53407   13120 53406  13121 53407  13200 53170  13201 53169  13202 53169  13203 53169  13204 53169  13205 53169  13206 53170  13207 53170  13220 53169  13300 53408  13301 53409  13310 53408  13400 01136  13401 01136  13410 01136  13411 01136  13450 01904 13460 01904   13500 01904  13501 01888  13502 01888  13503 01888  13504 01888  13505 01888  13506 01888  13507 01887  13508 01887  13511 01905  13512 01905  13515 01905  13516 01905  13517 01904  13518 01904  13519 01903  13520 01904  13521 01888  13531 01905 14000 01198   14010 01198  14200 01711  14201 01711  15002 01393  15003 01393  15006 01393  15300 01711  15302 01711  30200 53169  30304 53169  30336 53169  30337 53169  40320 01030  40321 01030  40324 01030  40326 01030  40330 01030  40335 01030  40338 01030 40381 53409   40500 CALL  40501 CALL  40587 CALL  40588 CALL  50000 02030  50001 02050  50002 02051  50003 02030  50004 02050  50005 02051  50302 01902  50306 01902  50308 01902  50320 55055  50321 55055  50324 55056  50325 55056  50340 55055  50343 53411 50370 01144   50371 01144  50372 01144  50374 01144  50375 01144  50727 02030  50728 02050  50729 02051  51130 01198  51134 01127  51200 53407  51201 53406  51202 53407  51203 53407  51204 53406  51205 53407  51210 53409  51211 53406  51212 53409  51213 53409 51214 53408   51215 53409  51240 01391  51241 01391  51243 01391  51244 01296  51245 01296  51247 01296  51248 01390  51250 01390  51300 01198  51301 01198  51302 01198  51303 01198  51304 01296  51305 01296  51306 01296  51307 01296  51310 01198  51311 01198 51312 01198   51313 01198  51314 01296  51315 01296  51316 01296  51317 01296  51330 01712  51331 01712  51370 54963  51371 54962  51390 01905  51391 01905  51392 01904  51393 01902  51394 01905  51395 01905  51396 01904  51397 01902  51400 53408  51401 53409 51405 53408  Model Drop-In No. Motor  Model Drop-In No. Motor  Model Drop-In No. Motor  Model Drop-In No. Motor  Model Drop-In No. Motor  Model Drop-In No. Motor  Model Drop-In No. Motor  Model Drop-In No. Motor   Drop-In Motors Reduce Costly Downtime Associated With Routine Maintenance   For Models not Listed, Please Contact Customer Service   ...CHOOSE COLLET... TOOL THREAD... ...THEN CHOOSE COMPATIBLE COLLET INSERT *Denotes Standard Insert Included with Collet Collet Collet Part Collet Size Number Type  1/4" 50010 3-Piece 6 mm 50015 3-Piece 1/4" 50020 2-Piece 1/4" 50080 3-Piece 1/4" 51124 4-Piece 6 mm 50079 3-Piece 6 mm 51125 4-Piece 3/8" 50018 3-Piece 1/4" 51106 4-Piece 6 mm 51110 4-Piece 1/4" 50066 3-Piece 6 mm 50073 3-Piece 1/4" 50055 2-Piece – –– – ––   1/8" 1/4" 3/8" 3 mm 6 mm 8 mm  50065 50013* 50014 – 50016 50039 50065 50013 50014 – 50016* 50039 01647 01644* – 01648 01646 – 01495 01485* – 01496 01497 – 01495 01485* – 01496 01497 – 01495 01485 – 01496 01497* – 01495 01485 – 01496 01497* – 50065 50013 50014* – 50016 50039 01495 01485* – 01496 01497 – 01495 01485 – 01496 01497* – 50065 50013* 50014 – 50016 50039 50065 50013 50014 – 50016* 50039 50034 – – – – – 01495 01485 – 01496 01497 – 01647 01644 – 01648 01646 –   Tool  Thread   3/8"-24 Male M8x1 Male 5/16"-24 Male 1/2"-20 Male 1/4"-28 Female Integrated Collets: .4 hp Rt. Angle Die Grinders Mini-Dynafile® II   2006 Ind Cat_Accessories:2006 Industrial Catalog.qxd  9/27/06  5:43 PM  Page 190     ACCESSORIESACCESSORIES   191   51410 53408  51411 53408  51412 53409  51415 53408  51420 53408  51425 53409  51430 53408  51450 01136  51451 01184  51454 01136  51455 01184  51460 53408  51461 53408  51470 53169  51472 53169  51474 53169  51476 53169  51479 53169  51482 53169  51600 53169  51601 53169  51602 53169  51603 53169  51604 53169  51605 53169  51800 02030  51801 02050  51802 02051  51803 02030  51804 02050  51805 02051  51820 02030  51821 02050  51822 02051  51823 02030  51824 02050  51825 02051  51827 02030  51828 02050  51829 02051  51830 02030  51831 02050  51832 02051  51833 02030  51834 02050  51835 02051  51846 02030  51847 02050  51848 02051  52050 53406  52051 53406  52052 53406  52053 53406  52060 53407  52061 53407  52062 53407  52100 53170  52101 53169  52102 53170  52103 53170  52104 53169  52105 53170  52196 54807  52200 01390  52201 01391  52202 01390  52203 01391  52204 01390 52205 01390   52206 01390  52207 01390  52210 01044  52211 01044  52212 01044  52213 01044  52216 01030  52217 01030  52218 01030  52219 01030  52220 01044  52221 01044  52222 01044  52223 01044  52224 01717  52225 01717  52226 01717  52227 01717  52230 01390  52231 01391  52232 01390  52233 01391  52240 01711  52241 01711  52242 01711  52243 01711  52244 01711  52245 01711  52246 01717  52247 01711  52248 01711  52249 01711  52250 01390  52251 01390  52252 01390  52253 01390  52254 01711  52256 01712  52257 01712  52258 01712  52260 01044  52261 01044  52262 01044  52263 01044  52264 01712  52265 01712  52266 01712  52267 01013  52268 01030  52269 01030  52270 01030  52272 01030  52273 01030  52274 01030  52275 01030  52276 01713  52277 01713  52278 01713  52279 01717  52280 02093  52281 01713  52282 01713  52283 01713  52284 01711  52285 01711  52286 01711  52287 01711  52288 01717 52289 01717   52290 01717  52291 01717  52292 01717  52293 01717  52294 01717  52295 01717  52296 01717  52297 01717  52298 01717  52299 01717  52315 02030  52316 02050  52317 02051  52318 02030  52319 02050  52320 02051  52325 01391  52326 01391  52327 01391  52328 01391  52331 01390  52333 01390  52335 01390  52337 01390  52341 01391  52345 01391  52351 01712  52373 01894  52374 01894  52376 01902  52377 01902  52378 01902  52379 01902  52380 01902  52390 01132  52391 01132  52392 01132  52400 01132  52401 01132  52402 01132  52403 01132  52404 01132  52405 01132  52410 01711  52411 01711  52412 01711  52413 01711  52414 01711  52415 01711  52420 02218  52421 02218  52424 01711  52425 01711  52426 01711  52430 02216  52431 02216  52432 02216  52433 02216  52434 01843  52435 02219  52436 01711  52450 52440  52451 52440  52452 52440  52453 52440  52454 52440  52500 01392  52502 01393 52503 01392   52510 01393  52512 01393  52515 02087  52516 02087  52518 02089  52520 02030  52521 02050  52522 02051  52523 02030  52524 02050  52525 02051  52530 02030  52531 02050  52532 02051  52533 02030  52534 02050  52535 02051  52540 02030  52541 02050  52542 02051  52543 02030  52544 02050  52545 02051  52550 02030  52551 02050  52552 02051  52553 02030  52554 02050  52555 02051  52557 02093  52558 02093  52560 01902  52561 01902  52562 01902  52563 01902  52564 01902  52565 01902  52566 01902  52567 01902  52573 01893  52574 01893  52575 01893  52576 01902  52577 01902  52578 01902  52579 01902  52580 01902  52581 01902  52590 54807  52600 01030  52601 01030  52602 01030  52604 01030  52605 01030  52610 01711  52611 01711  52612 01711  52620 54959  52625 54957  52660 01904  52661 01888  52662 01888  52663 01887  52665 01908  52666 01908  52667 01908  52668 01908  52669 01908 52672 01905   52673 01904  52674 01903  52675 01902  52676 01902  52677 01902  52678 01902  52679 01902  52680 01904  52681 01888  52682 01888  52683 01187  52684 01886  52685 01908  52686 01908  52687 01908  52688 01908  52689 01908  52700 01711  52702 01711  52705 02050  52710 02030  52711 02050  52712 02051  52715 01889  52716 01889  52717 01889  52718 01889  52719 01902  52720 01902  52721 01902  52722 01902  52725 01904  52726 01904  52730 01902  52731 01902  52732 01902  52733 01902  52734 01902  52735 01902  53037 01198  53046 02030  53047 02050  53048 02051  53060 55057  53070 53408  53071 53409  53072 53409  53073 53408  53074 53409 53075 53406   53076 53407  53077 53407  53078 53406  53079 53407  53080 01136  53081 01184  53090 55059  53091 55059  53095 55059  53096 55056  53110 53169  53111 53169  53200 53408  53210 53409  53400 53406  53401 53406  53402 53406  53403 53406  53410 53406  53415 53407  53417 53407  53420 53406  53425 53407  53430 53406  53435 53407  53440 53406  53460 53407  53501 01127  53502 01127  53506 01127  53507 01127  53510 01127  53511 01127  53512 01127  53513 01127  53514 01127  58400 56481  58401 56481  58404 56481  58405 56482  58406 56482  58409 56482  58410 56483  58411 56483  58414 56483  58415 56487  58416 56487  58417 56487  58418 56488 58419 56488   58420 56488  58430 56485  58431 56485  58434 56485  58435 56486  58436 56486  58439 56486  58441 56484  58442 56484  58443 56484  58444 56484  58445 56484  58446 56484  58450 56480  58455 56480  57126 51365  57127 02093  57135 02093  57201 04135  57202 04135  57203 04135  57204 04135  57210 04134  57211 04134  57212 04134  57213 04134  57214 04134  57306 57747  57310 57747  57314 57747  57315 57747  57600 04133  57601 04133  57602 04133  57603 04133  57604 04133  57700 57747  57704 57747  57900 53412  57902 53412  57910 53412  57930 53412  57935 53412  58000 53412  58010 53412 58050 53408   58460 58475  58461 58475  58465 58475  58466 58475  59000 59450  59003 59450  59004 59450  59005 59453  59008 59453  59009 59453  59010 59456  59013 59453  59014 59456  59015 59451  59018 59451  59019 59451  59020 59454  59023 59454  59024 59454  59025 59457  59028 59457  59029 59457  59030 59452  59033 59452  59034 59452  59035 59455  59038 59455  59039 59455  59040 59458  59043 59458  59044 59458  59100 59450  59103 59450  59104 59450  59105 59453  59108 59453  59109 59453  59110 59456  59113 59456  59114 59456 66402 66441  Model Drop-In No. Motor  Model Drop-In No. Motor  Model Drop-In No. Motor  Model Drop-In No. Motor  Model Drop-In No. Motor  Model Drop-In No. Motor  Model Drop-In No. Motor  Model Drop-In No. Motor   Drop-In Motors (Cont’d)  Reduce Costly Downtime Associated With Routine Maintenance   For Models not Listed, Please Contact Customer Service   Ten Pack  Pad Diameter Orbit Dia. Ten Pack w/Repair Tools   3", 3-1/2" 3/8" (10 mm) 59470 59460 (76 mm, 89 mm) 3/16" (5 mm) 59471 59461 3/32" (2.5 mm) 59472 59462 5" 3/8" (10 mm) 59473 59463 (127 mm) 3/16" (5 mm) 59474 59464 3/32" (2.5 mm) 59475 59465 6" 3/8" (10 mm) 59476 59466 (152 mm) 3/16" (5 mm) 59477 59467 3/32" (2.5 mm) 59478 59468   Drop-In Motor Ten Packs  For use with Dynorbital-Spirit ®Sanders   2006 Ind Cat_Accessories:2006 Industrial Catalog.qxd  9/27/06  5:43 PM  Page 191     ACCESSORIESACCESSORIES   192 Motor Tune-Up Kit/Tool Compatibility Includes Assorted Parts to Maintain Your Motor in Tip-Top Shape   For Models not Listed, Please Contact Customer Service   11000 95600  11001 95600  11003 95600  11021 95600  11060 95600  11142 11270  11143 11270  11450 96259  11462 96011  11475 96045  11476 96011  11477 96259  11480 96011  11481 96011  11486 96011  11489 96011  11490 95840  11491 96011  12185 95874  12186 95874  12187 95874  12188 95874  12190 95874  12191 95874  12195 95874  12198 95874  12200 96261  12201 96261  12202 96261  12203 96261  12204 96261  12205 96261  12206 96261  12207 96261  12250 96533  12252 96533  12254 96533  13024 96260  13025 95604  13026 95604  13027 95604  13028 95604  13029 95604  13030 95604  13043 95810  13044 95810  13045 95604  13046 95810  13050 95604  13085 95604  13086 95604  13100 96173 13101 96173   13102 96173  13120 96173  13121 96173  13200 96260  13201 96260  13202 96260  13203 96260  13204 96260  13205 96260  13206 96260  13207 96260  13214 96260  13220 96260  13280 96260  13300 96174  13301 96174  13310 96174  13320 96174  13321 96174  13400 96234  13401 96234  13410 96234  13411 96234  13415 95632  13450 96532  13460 96532  13500 96532  13501 96532  13502 96532  13503 96532  13504 96532  13505 96532  13506 96532  13507 96532  13508 96532  13509 96532  13511 96532  13512 96532  13515 96532  13516 96532  13517 96532  13518 96532  13519 96532  13520 96532  13521 96532  13523 96532  13531 96532  14000 95600  14010 95600  14200 96045  14201 95840  14300 96011 14302 96011   14303 96011  14306 96011  14308 96260  14309 96260  14310 96260  14311 96260  14312 96260  14313 96260  15002 96074  15003 96074  15006 96074  15300 96233  15302 96233  15360 96529  15400 96233  15401 96233  15420 96233  30200 96260  30304 95604  30336 96260  30336 95604  30337 96260  40320 96044  40321 96044  40324 96044  40326 96044  40330 96044  40335 96044  40338 96044  40353 96074  40381 96174  40500 42735  40501 42735  40587 42735  40588 42735  42630 95810  42631 95810  50000 96179  50001 96179  50002 96179  50003 96179  50004 96179  50005 96179  50027 95874  50028 95874  50046 95809  50047 95809  50075 95809  50089 95874  50096 95874  50097 95874  50104 95874 50105 95874   50128 95874  50129 95874  50160 95840  50201 95809  50232 95603  50233 95603  50234 95603  50241 95840  50242 95840  50245 95600  50249 95603  50250 95840  50251 95840  50302 96532  50303 96011  50304 96011  50306 96532  50307 96011  50308 96532  50320 96047  50321 96047  50324 96047  50325 96047  50340 96047  50343 96049  50345 96042  50346 96042  50347 96043  50348 96043  50349 96042  50350 96042  50360 96042  50370 96184  50371 96184  50372 96184  50375 96184  50727 96179  50728 96179  50729 96179  50730 96011  50760 96011  50809 95604  50812 95604  50815 95604  50816 95604  50822 95604  50823 95604  50866 95604  50867 95604  50990 95600  50991 95600  50998 95600 50999 95600   51000 95600  51001 95600  51002 95600  51003 95600  51004 95603  51005 95603  51007 95603  51008 95603  51009 95603  51010 95603  51011 95603  51012 95603  51013 95603  51023 95600  51024 95600  51025 95600  51034 95600  51055 95810  51056 95810  51057 95810  51058 95810  51059 95810  51061 95810  51079 95840  51080 95840  51082 95840  51087 95604  51088 95604  51089 95604  51091 95809  51092 95604  51093 95604  51100 96173  51130 95600  51134 96007  51200 96173  51201 96173  51202 96173  51203 96173  51204 96173 51205 96173   51210 96174  51211 96174  51212 96174  51213 96174  51214 96174  51215 96174  51240 96049  51241 96049  51242 96049  51243 96049  51244 96044  51245 96044  51246 96044  51247 96044  51248 96049  51249 96049  51250 96049  51251 96049  51300 95600  51301 95600  51302 95600  51303 95600  51304 96530  51305 96530  51306 96530  51307 96530  51310 95600  51311 95600  51312 95600  51313 95600  51314 96530  51315 96530  51316 96530  51317 96530  51330 96529  51331 96529  51350 96531  51351 96531  51370 96504  51371 96504 51390 96532   51391 96532  51392 96532  51393 96532  51394 96532  51395 96532  51396 96532  51397 96532  51400 96174  51401 96174  51405 96174  51410 96174  51411 96174  51412 96174  51415 96174  51420 96174  51425 96174  51430 96174  51445 98224  51446 96672  51447 96532  51448 96672  51449 96532  51450 96234  51451 96234  51454 96234  51455 96234  51458 96234  51459 96672  51460 96174  51461 96174  51470 96178  51472 96178  51474 96178  51476 96178  51479 96178  51482 96178  51600 96178  51601 96178  51602 96178  51603 96178 51604 96178   51605 96178  51735 96522  51800 96179  51801 96179  51802 96179  51803 96179  51804 96179  51805 96179  51820 96179  51821 96179  51822 96179  51823 96179  51824 96179  51825 96179  51827 96179  51828 96179  51829 96179  51830 96179  51831 96179  51832 96179  51833 96179  51834 96179  51835 96179  51846 96179  51847 96179  51848 96179  52004 95810  52008 95810  52009 95810  52050 96173  52051 96173  52052 96173  52053 96173  52060 96173  52061 96173  52062 96173  52100 96260  52101 96260  52102 96260  52103 96260 52104 96260  Model Tune-Up No. Kit  Model Tune-Up No. Kit  Model Tune-Up No. Kit  Model Tune-Up No. Kit   Model Tune-Up No. Kit  Model Tune-Up No. Kit  Model Tune-Up No. Kit  Model Tune-Up No. Kit   2006 Ind Cat_Accessories:2006 Industrial Catalog.qxd  9/27/06  5:43 PM  Page 192     ACCESSORIESACCESSORIES   193  Motor Tune-Up Kit/Tool Compatibility(Cont’d)  Includes Assorted Parts to Maintain Your Motor in Tip-Top Shape   For Models not Listed, Please Contact Customer Service   52105 96260  52196 96505  52200 96048  52201 96049  52202 96048  52203 96049  52204 96048  52205 96049  52206 96048  52207 96049  52210 96039  52211 96044  52212 96044  52213 96044  52214 96044  52215 96044  52216 96044  52217 96044  52218 96044  52219 96044  52220 96044  52221 96044  52222 96044  52223 96044  52224 96045  52225 96045  52226 96045  52227 96045  52230 96048  52231 96049  52232 96048  52233 96049  52240 96045  52241 96045  52242 96045  52243 96045  52244 96045  52245 96045  52246 96045  52247 96045  52248 96045  52249 96045  52250 96048  52251 96049  52252 96048  52253 96049  52254 96045  52255 96049  52256 96529  52257 96529  52258 96529  52260 96039 52261 96044   52262 96044  52263 96044  52264 96529  52265 96529  52266 96045  52267 96044  52268 96044  52269 96044  52270 96044  52272 96044  52273 96044  52274 96044  52275 96044  52276 96529  52277 96529  52278 96529  52279 96045  52280 96522  52281 96529  52282 96529  52283 96529  52284 96045  52285 96045  52286 96045  52287 96045  52288 96045  52289 96045  52290 96045  52291 96045  52292 96045  52293 96045  52294 96045  52295 96045  52297 96045  52298 96045  52299 96045  52315 96179  52316 96179  52317 96179  52318 96179  52319 96179  52320 96179  52325 96049  52326 96049  52327 96049  52328 96049  52331 96049  52333 96049  52335 96049  52337 96049  52341 96049  52345 96049 52373 96532   52374 96532  52376 96532  52377 96532  52378 96532  52379 96532  52380 96532  52390 96039  52391 96039  52392 96039  52400 96044  52401 96044  52402 96044  52403 96044  52404 96044  52405 96044  52410 96045  52411 96045  52412 96045  52413 96045  52414 96045  52415 96045  52420 96044  52421 96044  52424 96045  52425 96045  52426 96045  52430 96045  52431 96045  52432 96045  52433 96045  52434 95600  52435 96530  52436 96045  52438 96532  52439 96179  52450 96259  52451 96259  52452 96259  52453 96259  52454 96259  52455 96259  52500 96049  52501 96049  52502 96049  52503 96049  52505 96049  52510 96049  52512 96049  52515 96522  52516 96522  52518 96522  52520 96179 52521 96179   52522 96179  52523 96179  52524 96179  52525 96179  52530 96179  52531 96179  52532 96179  52533 96179  52534 96179  52535 96179  52538 96179  52540 96179  52541 96179  52542 96179  52543 96179  52544 96179  52545 96179  52550 96179  52551 96179  52552 96179  52553 96179  52554 96179  52555 96179  52557 96522  52558 96522  52560 96532  52561 96532  52562 96532  52563 96532  52564 96532  52565 96532  52566 96532  52567 96532  52573 96532  52574 96532  52575 96532  52576 96532  52577 96532  52578 96532  52579 96532  52580 96532  52581 96532  52590 96505  52595 96505  52600 96039  52601 96039  52602 96039  52603 96039  52604 96039  52605 96039  52610 96045  52611 96045 52612 96045   52620 96504  52625 96504  52660 96532  52661 96532  52662 96532  52663 96532  52664 96532  52665 96532  52666 96532  52667 96532  52668 96532  52669 96532  52672 96532  52673 96532  52675 96532  52676 96532  52677 96532  52678 96532  52679 96532  52680 96532  52681 96532  52682 96532  52683 96532  52684 96532  52685 96532  52686 96532  52687 96532  52688 96532  52689 96532  52692 96532  52693 96532  52695 96532  52696 96532  52697 96532  52698 96532  52699 96532  52700 96045  52702 96045  52705 96045  52706 96179  52710 96179  52711 96179  52712 96179  52715 96532  52716 96532  52717 96532  52718 96532  52719 96532  52720 96532  52721 96532  52722 96532  52725 96532 52726 96532   52730 96532  52731 96532  52732 96532  52900 98223  53000 95604  53001 96260  53003 95604  53004 96260  53011 95840  53012 95840  53013 95840  53015 95600  53016 95600  53017 95600  53019 95603  53021 95603  53022 95810  53023 95810  53026 95809  53028 95810  53037 95600  53046 96179  53047 96179  53048 96179  53060 96047  53070 96173  53071 96173  53072 96174  53073 96174  53074 96174  53075 96173  53076 96173  53077 96173  53078 96173  53079 96173  53080 96234  53081 96234  53090 96047  53091 96047  53095 96047  53096 96047  53143 96532  53200 96174  53202 96174  53204 96174  53210 96174  53400 96333  53401 96333  53402 96333  53403 96333  53410 96333  53415 96179 53417 96179   53420 96333  53425 96179  53430 96333  53435 96179  53440 96333  53455 96333  53460 96179  53465 96179  53501 96007  53502 96007  53506 96007  53507 96007  53510 96007  53511 96007  53512 96007  53513 96007  53514 96007  53521 96532  53522 96532  53523 96532  53531 96532  53532 96532  53533 96532  54001 95809  54002 95809  54003 95809  54480 96107  54481 96107  54482 96107  54483 96107  54484 96107  54660 95936  54661 95936  54663 95936  54825 95524  54830 95524  54840 95524  54857 95936  54860 95524  54863 95524  54866 95524  54868 95936  54870 95936  54874 95936  56200 95936  56201 95936  56203 95936  56204 95936  56500 95808  56501 95808  56507 95808  56800 96024 56801 96024   56802 96024  56803 96024  56804 96024  56815 96024  56816 96024  56817 96024  56818 96024  56819 96024  56821 96024  56822 96024  56823 96024  56824 96024  56826 96024  56827 96024  56828 96024  56829 96024  56830 96024  56832 96024  56833 96024  56834 96024  56835 96024  56840 96024  56843 96024  56844 96024  56850 96024  56851 96024  56852 96024  56853 96024  56854 96024  56855 96024  56856 96024  56857 96024  56858 96024  56859 96024  56860 96024  56861 96024  56862 96024  56863 96024  56864 96024  56865 96024  56866 96024  56867 96024  56900 96024  56901 96024  56902 96024  56903 96024  56904 96024  56915 96024  56916 96024  56917 96024  56918 96024  56919 96024 56921 96024  Model Tune-Up No. Kit  Model Tune-Up No. Kit  Model Tune-Up No. Kit  Model Tune-Up No. Kit  Model Tune-Up No. Kit  Model Tune-Up No. Kit  Model Tune-Up No. Kit  Model Tune-Up No. Kit   2006 Ind Cat_Accessories:2006 Industrial Catalog.qxd  9/27/06  5:43 PM  Page 193     ACCESSORIESACCESSORIES   194 Motor Tune-Up Kit/Tool Compatibility(Cont’d)  Includes Assorted Parts to Maintain Your Motor in Tip-Top Shape   For Models not Listed, Please Contact Customer Service   56922 96024  56923 96024  56924 96024  56926 96024  56927 96024  56928 96024  56929 96024  56930 96024  56932 96024  56933 96024  56934 96024  56935 96024  56950 96024  56951 96024  56952 96024  56953 96024  56954 96024  56955 96024  56956 96024  56957 96024  56958 96024  56959 96024  56960 96024  56961 96024  56962 96024  56963 96024  56964 96024  56965 96024  56966 96024  56967 96024  56968 96024  56969 96024  56970 96024  56971 96024  56972 96024  57000 96024  57001 96024  57002 96024  57003 96024  57004 96024  57006 96024  57010 96437  57015 96024  57016 96024  57017 96024  57018 96024  57019 96024  57021 96024  57022 96024  57023 96024  57024 96024  57026 96024 57027 96024   57028 96024  57029 96024  57030 96024  57032 96024  57033 96024  57034 96024  57035 96024  57125 96437  57126 96537  57127 96522  57130 96024  57131 96024  57132 96024  57133 96024  57134 96024  57135 96024  57136 96024  57137 96024  57138 96024  57139 96024  57140 96024  57141 96024  57142 96024  57143 96024  57144 96024  57145 96024  57146 96024  57147 96024  57148 96024  57149 96024  57150 96024  57151 96024  57152 96024  57153 96024  57154 96024  57157 96024  57200 96200  57201 96200  57202 96200  57203 96200  57204 96200  57210 96200  57211 96200  57212 96200  57213 96200  57214 96200  57220 96122  57221 96122  57222 96122  57223 96122  57224 96122  57225 96122 57226 96122   57227 96122  57228 96122  57229 96122  57240 96122  57240 96122  57245 96122  57300 96122  57301 96122  57302 96122  57303 96122  57304 96122  57306 96195  57310 96195  57311 96122  57312 96122  57313 96122  57314 96122  57315 96195  57400 96107  57401 96107  57402 96107  57403 96107  57404 96107  57405 96107  57407 96107  57500 96109  57501 96109  57502 96109  57503 96109  57504 96109  57530 96024  57550 96107  57551 96107  57552 96107  57553 96107  57555 96107  57570 96018  57571 96018  57572 96018  57573 96018  57574 96018  57575 96018  57582 96018  57583 96018  57584 96018  57585 96018  57600 96122  57601 96122  57602 96122  57603 96122  57604 96122  57610 96122 57611 96122   57621 96480  57625 96480  57626 96480  57627 96480  57628 96480  57629 96480  57630 96480  57631 96480  57632 96480  57633 96480  57634 96480  57635 96480  57636 96480  57637 96480  57638 96480  57639 96480  57640 96480  57641 96480  57642 96480  57643 96480  57655 96480  57656 96480  57657 96480  57658 96480  57659 96480  57660 96480  57661 96480  57662 96480  57663 96480  57664 96480  57665 96480  57667 96480  57668 96480  57669 96480  57670 96480  57671 96480  57672 96480  57673 96480  57674 96480  57675 96480  57676 96480  57677 96480  57700 96195  57704 96195  57800 96024  57801 96024  57802 96024  57803 96024  57804 96024  57810 96024  57811 96024  57812 96024 57813 96024   57814 96024  57860 96024  57861 96024  57862 96024  57863 96024  57864 96024  57900 96236  57902 96236  57906 96236  57908 96236  57909 96169  57910 96236  57920 96169  57922 96169  57923 96169  57924 96169  57925 96169  57926 96169  57927 96169  57928 96169  57929 96169  57930 96236  57935 96236  58000 96236  58010 96236  58034 96179  58035 96179  58037 96179  58038 96179  58039 96179  58040 98576  58041 98576  58050 96173  58052 96510  58053 96510  58054 96510  58070 96169  58075 96169  58100 96480  58101 96480  58102 96480  58103 96480  58104 96480  58115 96480  58116 96480  58117 96480  58118 96480  58119 96480  58126 96480  58127 96480  58128 96480  58129 96480 58130 96480   58200 96480  58201 96480  58202 96480  58203 96480  58204 96480  58215 96480  58216 96480  58217 96480  58218 96480  58219 96480  58226 96480  58227 96480  58228 96480  58229 96480  58230 96480  58300 96480  58301 96480  58302 96480  58303 96480  58304 96480  58315 96480  58316 96480  58317 96480  58318 96480  58319 96480  58326 96480  58327 96480  58328 96480  58329 96480  58330 96480  58400 96169  58401 98220  58404 98220  58405 98220  58406 98220  58409 98220  58410 98221  58411 98221  58412 98221  58414 98221  58415 98220  58416 98220  58417 98220  58418 98220  58419 98220  58420 98220  58430 98220  58431 98220  58434 98220  58435 98220  58436 98220  58439 98220 58441 98221   58442 98221  58443 98221  58444 98221  58445 98221  58446 98221  58450 98220  58455 98220  58460 98220  58461 98220  58462 98220  58465 98220  58466 98220  58467 98220  58480 98224  58485 98224  58500 98222  58501 98222  58502 98222  58503 98222  58504 98222  58505 98222  58506 98222  58507 98222  58508 98222  59000 96510  59001 96510  59002 96510  59003 96510  59004 96510  59005 96510  59006 96510  59007 96510  59008 96510  59009 96510  59010 96510  59011 96510  59012 96510  59013 96510  59014 96510  59015 96510  59016 96510  59017 96510  59018 96510  59019 96510  59020 96510  59021 96510  59022 96510  59023 96510  59024 96510  59025 96510  59026 96510  59027 96510 59028 96510   59029 96510  59030 96510  59031 96510  59032 96510  59033 96510  59034 96510  59035 96510  59036 96510  59037 96510  59038 96510  59039 96510  59040 96510  59041 96510  59042 96510  59043 96510  59044 96510  59100 96510  59101 96510  59102 96510  59103 96510  59104 96510  59105 96510  59106 96510  59107 96510  59108 96510  59109 96510  59110 96510  59111 96510  59112 96510  59113 96510  59114 96510  59115 96510  59116 96510  59117 96510  59118 96510  59119 96510  59200 96122  59201 96122  59204 96122  59210 96122  59211 96122  59214 96122  59302 42735  59303 42735  59304 42735  59305 42735  Model Tune-Up No. Kit  Model Tune-Up No. Kit  Model Tune-Up No. Kit  Model Tune-Up No. Kit  Model Tune-Up No. Kit  Model Tune-Up No. Kit  Model Tune-Up No. Kit  Model Tune-Up No. Kit   2006 Ind Cat_Accessories:2006 Industrial Catalog.qxd  9/27/06  5:43 PM  Page 194     ACCESSORIESACCESSORIES   195  Leveling Jacks For Precision Machine Leveling and Support   • Compact, lightweight design.  • Lower surface of wedge is specially contoured to float laterally within concave base unit, automatically compensating for uneven floor conditions up to 5 degrees of slope.  • Black oxide finish resistant to corrosion and rust. Grooved top allows oils and liquids to run out; also helps dissipate vibration.  • Wedge action allows easy adjustment of height (1/4"- 3/8") with the turn of a wrench.  • Both models shown with optional  Vibration-Absorbing Mounting Pad.   Wedge-Action Leveling Jacks  • Two-piece design that provides solid support from 3,000 to 9,000 pounds/foot.  • Low-profile is ideal for applications constricted by reduced height.     Vertical Motion Leveling Jacks  • Three-piece design combines the advantages of a wedge-action jack with vertical lift capabilities in one unique and practical unit.    • Level and support up to 30,000 pounds/foot.  • Use with or without anchor bolts, depending upon installation. When anchor bolts are used, they pass through the entire assembly without interfering with the leveling action.   Vibration Absorbing Mounting Pads  • Recommended to reduce the transmission of internal machine noise to the building structure and dissipate transmitted vibrations from one machine to another.    • Pads are resistant to oil, grease and acids. They resist breakdown under load and over time.  • See chart below for Leveling Jack/mounting pad assembly numbers.   Vi-Sorb Pads   • Provide basic vibration reduction.    • Available with all models of Dynabrade Leveling Jacks. Also sold separately.   Vi-Damp  IIPads   • Highly recommended, innovative polymer construction affords increased vibration reduction at heavier weights.  • Available with Dynabrade Leveling Jacks of 15,000-30,000 pound/foot capacity. Also sold separately.   Model Recommended Max. Height x Width   Weight Anchor Bolt  with 1/4" with 1/2" with 3/4" with 1/4" with 1/2" with 3/4" Number Lifting Weight Rise x Length lbs. Hole Dia. Vi-Sorb Vi-Sorb Vi-Sorb Vi-Damp II Vi-Damp II Vi-Damp II  60200 3,000 lbs.  1/4" 1-1/8" x 3-1/2" x 6" 5 – 60205 60206 60207 – – – 60201 9,000 lbs.  3/8" 2-1/4" x 3-1/2" x 6" 11 – 60208 60209 60210 – – – 60202 15,000 lbs. 3/16" 2-3/8" x 3-1/2" x 5-3/4" 11 1" 60211 60212 60213 60217 60218 60229 60203 20,000 lbs. 1/4" 2-3/4" x 3-1/2" x 6-3/4" 14 1-1/8" 60214 60215 60216 60219 60220 60231 60204 30,000 lbs. 1/4" 2-3/4" x 3-1/2" x 6-3/4" 14 1-1/8" 60230 60221 60232 60233 60234 60235   Model 60201▲ Model 60202▲   Leveling Jack Specifications Leveling Jack/Mounting Pad Assemblies   FLOOR   APPROX. 5˚   MACHINE MACHINE   FLOOR  APPROX. 5˚   Ensure consistent stability and optimal machine performance   Pad Thickness Part  For Use Vibration  Type Inch (mm) Number With Reduction  91969 60200, 60201 1/4 (6) 91966 60202 43%  91968 60203, 60204 91978 60200, 60201 Vi-Sorb 1/2 (13) 91965 60202 74%  91967 60203, 60204 91885 60200, 60201 3/4 (19) 91886 60202 80%  91984 60203, 60204 1/4 (6) 91962 60202 48% 91964 60203, 60204 Vi-Damp II 1/2 (13) 91961 60202 79% 91963 60203, 60204 3/4 (19) 91887 60202 90% 91988 60203, 60204   2006 Ind Cat_Accessories:2006 Industrial Catalog.qxd  9/27/06  5:43 PM  Page 195     ACCESSORIES ACCESSORIES   196 Contact Wheels and Assemblies Keep your Belt Tools Running at Maximum Efficiency   Wheels and Assemblies for Use with Dynabrade Abrasive Belt Tools   Many configurations are available to accommodate a variety of applications  The first contact wheel assembly listed (*) is the assembly that comes standard with contact arm shown. All optional assemblies are listed below the standard assembly.   Contact wheel assemblies include contact wheel plus two bearings. Certain assemblies may also contain a shaft and/or spacers. Refer to individual parts pages for breakdown.   Dynafile ® Contact Arm Assemblies   Contact Arm   Part Number   11178 11179 11212 11213 11214 11215 11216 11217   Wheel Assembly Wheel Wheel Wheel Wheel Face  Part Number P/N Dia. Width I.D. Surface Material   11068* 11067 5/16" 3/8" 1/4" Crowned Steel 11078* 11077 5/8" 3/8" 3/8" Crowned 70 Duro Rubber 11066* 11065 5/16" 1/8" 1/4" Flat Steel 11068* 11067 5/16" 3/8" 1/4" Crowned Steel 11070 11069 7/16" 3/8" 1/4" Crowned 70 Duro Rubber 11076 11075 7/16" 3/8" 3/8" Crowned Steel 11070* 11069 7/16" 3/8" 1/4" Crowned 70 Duro Rubber 11068 11067 5/16" 3/8" 1/4" Crowned Steel 11076 11075 7/16" 3/8" 3/8" Crowned Steel 11072* 11071 7/16" 1/8" 3/8" Crowned Brass 11074 11073 5/8" 1/8" 3/8" Crowned 70 Duro Rubber 11074* 11073 5/8" 1/8" 3/8" Crowned 70 Duro Rubber 11072 11071 7/16" 1/8" 3/8" Crowned Brass 11076* 11075 7/16" 3/8" 3/8" Crowned Steel 11068 11067 5/16" 3/8" 1/4" Crowned Steel 11070 11069 7/16" 3/8" 1/4" Crowned 70 Duro Rubber   2006 Ind Cat_Accessories:2006 Industrial Catalog.qxd  9/27/06  6:42 PM  Page 196     Contact Wheels and Assemblies  (Cont’d)  Keep your Belt Tools Running at Maximum Efficiency   ACCESSORIES ACCESSORIES 197   Dynafile ® Contact Arm Assemblies (Cont’d) *Assembly comes standard with contact arm shown   Contact Arm   Part Number   11218 11219 11228 11231  11232  11234 11237 11238 11239 11240 11241   Wheel Assembly Wheel Wheel Wheel Wheel Face  Part Number P/N Dia. Width I.D. Surface Material   11078* 11077 5/8" 3/8" 3/8" Crowned 70 Duro Rubber 11080* 11079 1" 3/8" 3/8" Round 70 Duro Rubber Radiused  11078 11077 5/8" 3/8" 3/8" Crowned 70 Duro Rubber 11086 11085 1" 3/8" 3/8" V-Shaped 90 Duro   Urethane  11078* 5/8" 3/8" 3/8" Crowned 70 Duro Rubber 11084* 11083 3/4" 1/2" 3/8" Crowned 70 Duro Rubber 11086* 11085 1" 3/8" 3/8" V-Shaped 90 Duro   Urethane  11080 11079 1" 3/8" 3/8" Round 70 Duro Rubber Radiused  11078 11077 5/8" 3/8" 3/8" Crowned 70 Duro Rubber 11080* 11079 1" 3/8" 3/8" Round 70 Duro Rubber Radiused  11066* 11065 5/16" 1/8" 1/4" Flat Steel 11051* N/A 1/4" 3/8" N/A Flat Steel 11068* 11067 5/16" 3/8" 1/4" Crowned Steel 11070 11069 7/16" 3/8" 1/4" Crowned  70 Duro Rubber 11076 11075 7/16" 3/8" 3/8" Crowned Steel 11078* 11077 5/8" 3/8" 3/8" Crowned 70 Duro Rubber 11074* 11073 5/8" 1/8" 3/8" Crowned 70 Duro Rubber 11072 11071 7/16" 1/8" 3/8" Crowned Brass   2006 Ind Cat_Accessories copy:2006 Industrial Catalog.qxd  10/3/06  3:20 PM  Page 197     ACCESSORIES ACCESSORIES   198 Contact Wheels and Assemblies  (Cont’d)  Keep your Belt Tools Running at Maximum Efficiency  Dynafile ® Contact Arm Assemblies (Cont’d) *Assembly comes standard with contact arm shown   Dynafile ® IIContact Arm Assemblies *Assembly comes standard with contact arm shown   Contact Arm   Part Number   11200 11201   Wheel Assembly Wheel Wheel Wheel Wheel Face  Part Number P/N Dia. Width I.D. Surface Material   11088* 11077 5/8" 3/8" 3/8" Crowned 70 Duro Rubber  11068* 11067 5/16" 3/8" 1/4" Crowned Steel 11070 11069 7/16" 3/8" 1/4" Crowned 70 Duro Rubber 11076 11075 7/16" 3/8" 3/8" Crowned Steel   Wheel Assembly Wheel Wheel Wheel Wheel Face  Part Number P/N Dia. Width I.D. Surface Material   11084* 11083 3/4" 1/2" 3/8" Crowned 70 Duro Rubber 11078* 11077 5/8" 3/8" 3/8" Crowned 70 Duro Rubber 11078* 11077 5/8" 3/8" 3/8" Crowned 70 Duro Rubber  – 11377 2-1/8" 1/2" 5/8" Flat Urethane – 11378 2-1/8" 1/4" 5/8" Flat Urethane – 11375 4-3/8" 1/2" 5/8" Flat Urethane – 11376 4-3/8" 1/4" 5/8" Flat Urethane  11078* 11077 5/8" 3/8" 3/8" Crowned 70 Duro Rubber 11078* 11077 5/8" 3/8" 3/8" Crowned 70 Duro Rubber 11078* 11077 5/8" 3/8" 3/8" Crowned 70 Duro Rubber 11078* 11077 5/8" 3/8" 3/8" Crowned 70 Duro Rubber 11090* 11077 5/8" 3/8" 3/8" Crowned 70 Duro Rubber 11078* 11077 5/8" 3/8" 3/8" Crowned 70 Duro Rubber   Contact Arm   Part Number   11243 11244 11245 11253 11254 11255 11258 11261 11262 11297 11312   2006 Ind Cat_Accessories copy:2006 Industrial Catalog.qxd  10/3/06  3:20 PM  Page 198     ACCESSORIES ACCESSORIES   199  Contact Wheels and Assemblies  (Cont’d)  Keep your Belt Tools Running at Maximum Efficiency  Dynafile ® IIContact Arm Assemblies (Cont’d) *Assembly comes standard with contact arm shown   Contact Arm   Part Number   11202 11203 11204 11206 11220 11300 11301 11304 11341 11280   Wheel Assembly Wheel Wheel Wheel Wheel Face  Part Number P/N Dia. Width I.D. Surface Material   11074* 11073 5/8" 1/8" 3/8" Crowned 70 Duro Rubber 11072 11071 7/16" 1/8" 3/8" Crowned Brass 11078* 11077 5/8" 3/8" 3/8" Crowned 70 Duro Rubber 11080* 11079 1" 3/8" 3/8" Round 70 Duro Rubber Radiused  11078 11077 5/8" 3/8" 3/8" Crowned 70 Duro Rubber 11086 11085 1" 3/8" 3/8" V-Shaped  90 Duro   Urethane  11282* 11281 3/4" 5/8" 3/8" Crowned 70 Duro Rubber 11352* 11353 5/16" 5/8" 1/4" Crowned Steel 11332* 11333 1/4" 3/8" 3/16" Crowned Steel 11342 11343 5/16" 3/8" 3/16" Crowned 50 Duro Rubber 11068* 11067 5/16" 3/8" 1/4" Crowned Steel 11070 11069 7/16" 3/8" 1/4" Crowned 70 Duro Rubber 11078* 11077 5/8" 3/8" 3/8" Crowned 70 Duro Rubber 11342* 11343 5/16" 3/8" 3/16" Crowned 50 Duro Rubber 11332 11333 1/4" 3/8" 3/16" Crowned Steel 11086* 11085 1" 3/8" 3/8" V-Shaped 90 Duro Rubber 11078 11077 5/8" 3/8" 3/8" Crowned 70 Duro Rubber 11080 11079 1" 3/8" 3/8" Round 70 Duro Rubber Radiused   2006 Ind Cat_Accessories copy:2006 Industrial Catalog.qxd  10/3/06  3:20 PM  Page 199     ACCESSORIES ACCESSORIES   200   Dynafile ® IIContact Arm Assemblies (Cont’d) *Assembly comes standard with contact arm shown  Contact Wheels and Assemblies  (Cont’d)  Keep your Belt Tools Running at Maximum Efficiency   Contact Arm   Part Number   11329 11330 11337 11350 11360 11286 11287 11314 11320 11321 11322   Wheel Assembly Wheel Wheel Wheel Wheel Face  Part Number P/N Dia. Width I.D. Surface Material   11078* 11077 5/8" 3/8" 3/8" Crowned 70 Duro Rubber 11072* 11071 7/16" 1/8" 3/8" Crowned Brass 11074 11073 5/8" 1/8" 3/8" Crowned 70 Duro Rubber 11076* 11075 7/16" 3/8" 3/8" Crowned Steel 11068 11067 5/16" 3/8" 1/4" Crowned Steel 11352* 11353 5/16" 5/8" 1/4" Crowned Steel 11078* 11077 5/8" 3/8" 3/8" Crowned 70 Duro Rubber 11078* 11077 5/8" 3/8" 3/8" Crowned 70 Duro Rubber 11282* 11281 3/4" 5/8" 3/8" Crowned 70 Duro Rubber 11066* 11065 5/16" 1/8" 1/4" Flat Steel 11078* 11077 5/8" 3/8" 3/8" Crowned 70 Duro Rubber 11070* 11069 7/16" 3/8" 1/4" Crowned 70 Duro Rubber 11068 11067 5/16" 3/8" 1/4" Crowned Steel 11076 11075 7/16" 3/8" 3/8" Crowned Steel 11090* 11077 5/8" 3/8" 3/8" Crowned 70 Duro Rubber   2006 Ind Cat_Accessories copy:2006 Industrial Catalog.qxd  10/3/06  3:20 PM  Page 200     ACCESSORIES ACCESSORIES   201  Contact Wheels and Assemblies  (Cont’d)  Keep your Belt Tools Running at Maximum Efficiency  Mini-Dynafile ® IIContact Arm Assemblies *Assembly comes standard with contact arm shown   Contact Arm   Part Number   15026 15027 15028 15029 15030 15031 15032 15033   Wheel Assembly Wheel Wheel Wheel Wheel Face  Part Number P/N Dia. Width I.D. Surface Material   11078* 11077 5/8" 3/8" 3/8" Crowned 70 Duro Rubber 11086 11085 1" 3/8" 3/8" V-Shaped  90 Duro   Urethane  11074* 11073 5/8" 1/8" 3/8" Crowned 70 Duro Rubber 11072 11071 7/16" 1/8" 3/8" Crowned Brass 11080* 11079 1" 3/8" 3/8" Round 70 Duro Rubber Radiused  11086* 11085 1" 3/8" 3/8" V-Shaped 90 Duro   Urethane  11080 11079 1" 3/8" 3/8" Round 70 Duro Rubber Radiused  11068* 11067 5/16" 3/8" 1/4" Crowned Steel 11070 11069 7/16" 3/8" 1/4" Crowned 70 Duro Rubber 11076 11075 7/16" 3/8" 3/8" Crowned Steel 11070* 11069 7/16" 3/8" 1/4" Crowned 70 Duro Rubber 11068 11067 5/16" 3/8" 1/4" Crowned Steel 11076 11075 7/16" 3/8" 3/8" Crowned Steel 11332* 11333 1/4" 3/8" 3/16" Crowned Steel 11342 11343 5/16" 3/8" 3/16" Crowned 50 Duro Rubber 11342* 11343 5/16" 3/8" 3/16" Crowned 50 Duro Rubber 11332 11333 1/4" 3/8" 3/16" Crowned Steel   2006 Ind Cat_Accessories copy:2006 Industrial Catalog.qxd  10/3/06  3:20 PM  Page 201     ACCESSORIES ACCESSORIES   202 Contact Wheels and Assemblies  (Cont’d)  Keep your Belt Tools Running at Maximum Efficiency  Dynafile ® III Contact Arm Assemblies *Assembly comes standard with contact arm shown   Contact Arm   Part Number   11200 11203 11204 11206 11286 11287 11320 11702 15321 15326 15350 15351   Wheel Assembly Wheel Wheel Wheel Wheel Face  Part Number P/N Dia. Width I.D. Surface Material   11088* 11077 5/8" 3/8" 3/8" Crowned 70 Duro Rubber 11078* 11077 5/8" 3/8" 3/8" Crowned 70 Duro Rubber 11080* 11079 1" 3/8" 3/8" Round 70 Duro Rubber Radiused  11282* 11281 3/4" 5/8" 3/8" Crowned 70 Duro Rubber 11078* 11077 5/8" 3/8" 3/8" Crowned 70 Duro Rubber 11282* 11281 3/4" 5/8" 3/8" Crowned 70 Duro Rubber 11078* 11077 5/8" 3/8" 3/8" Crowned 70 Duro Rubber 11638* 11637 4" 1/2" Round 70 Duro Rubber Radiused  15320* 15318 3/4" 7/8" 3/8" Crowned  70 Duro Rubber 15320* 15318 3/4" 7/8" 3/8" Crowned 70 Duro Rubber 15349* 11617 2" 1" 5/8" Flat 90 Duro Rubber 15346 15342 2" 5/8" 5/8" Crowned 40 Duro Rubber 15347 15343 2" 1" 5/8" V-Shaped 70 Duro Rubber 15348 11649 2" 1" 5/8" Flat 70 Duro Rubber 15348* 11649 2" 1" 5/8" Flat 70 Duro Rubber 15346 15342 2" 5/8" 5/8" Crowned 40 Duro Rubber 15347 15343 2" 1" 5/8" V-Shaped 70 Duro Rubber 15349 11617 2" 1" 5/8" Flat 90 Duro Rubber   2006 Ind Cat_Accessories copy:2006 Industrial Catalog.qxd  10/3/06  3:20 PM  Page 202     ACCESSORIES ACCESSORIES   203  Contact Wheels and Assemblies  (Cont’d)  Keep your Belt Tools Running at Maximum Efficiency  Dynafile ® III Contact Arm Assemblies (Cont’d) *Assembly comes standard with contact arm shown   Contact Arm   Part Number   15356 15357 15368 15375   Wheel Assembly Wheel Wheel Wheel Wheel Face  Part Number P/N Dia. Width I.D. Surface Material   15346* 15342 2" 5/8" 5/8" Crowned 40 Duro Rubber 15347 15343 2" 1" 5/8" V-Shaped 70 Duro Rubber 15348 11649 2" 1" 5/8" Flat 70 Duro Rubber 15349 11617 2" 1" 5/8" Flat 90 Duro Rubber 15347* 15343 2" 1" 5/8" V-Shaped 70 Duro Rubber 15346 15342 2" 5/8" 5/8" Crowned 40 Duro Rubber 15348 11649 2" 1" 5/8" Flat 70 Duro Rubber 15349 11617 2" 1" 5/8" Flat 90 Duro Rubber 15359* 15358 1" 1" 5/8" Flat 70 Duro Rubber  11616 11615 1" 1" 5/8" Flat 80 Duro Rubber  15348* 11649 2" 1" 5/8" Flat 70 Duro Rubber 15346 15342 2" 5/8" 5/8" Crowned 40 Duro Rubber 15347 15343 2" 1" 5/8" V-Shaped 70 Duro Rubber 15349 11617 2" 1" 5/8" Flat 90 Duro Rubber   2006 Ind Cat_Accessories copy:2006 Industrial Catalog.qxd  10/3/06  3:20 PM  Page 203     ACCESSORIES ACCESSORIES   204 Contact Wheels and Assemblies  (Cont’d)  Keep your Belt Tools Running at Maximum Efficiency  Dynabelter ® Contact Arm Assemblies *Assembly comes standard with contact arm shown   Contact Arm   Part Number   11681 11663 11668 11677 11682 11684 11717 11870   Wheel Assembly Wheel Wheel Wheel Wheel Face  Part Number P/N Dia. Width I.D. Surface Material   11650* 11649 2" 1" 5/8" Standard 70 Duro Rubber 11644 11643 2" 1/2" 5/8" Crowned 90 Duro Rubber 11634 11633 2" 1" 5/8" Crowned 40 Duro Rubber 11618 11617 2" 1" 5/8" Standard 90 Duro Rubber 11616* 11615 1" 1" 5/8" Flat 80 Duro Rubber 11616* 11615 1" 1" 5/8" Flat 80 Duro Rubber 11620* 11619 4" 1" 5/8" Crowned 40 Duro Rubber 11689 11688 4" 1" 5/8" Scoop 60 Duro   Urethane  11636 11635 4" 1" 5/8" Scoop 80 Duro   Urethane  11638* 11637 4" 1/2" 5/8" Severely 70 Duro Rubber  Radiused  11642* 11641 4" 5/8" 5/8" Scoop 40 Duro Rubber 11892 11886 4" 5/8" 5/8" Scoop 80 Duro   Urethane  11889 11888 4" 5/8" 5/8" Scoop 90 Duro   Urethane  11618* 11617 2" 1" 5/8" Standard 90 Duro Rubber 11644 11643 2" 1/2" 5/8" Standard 90 Duro Rubber 11634 11633 2" 1" 5/8" Crowned 40 Duro Rubber 11650 11649 2" 1" 5/8" Standard 70 Duro Rubber 11847* 11846 2" 2" 1-1/8" Standard 70 Duro   Urethane  11851 11850 2" 2" 1-1/8" Standard 90 Duro   Urethane   2006 Ind Cat_Accessories copy:2006 Industrial Catalog.qxd  10/3/06  3:20 PM  Page 204     ACCESSORIESACCESSORIES   205  Dyn ¯uba Cleaning and Polishing Products for Abrasive and Polishing Belts Dyn¯uba 100 Ozone Safe  • Our most popular Dyn¯uba product - extends belt life.    • Keeps belts free of metal build-up when sanding non-ferrous metals with grit 80 or finer.   Dyn¯uba 26   • Abrasive belt grease for use with all metals.  • Promotes free cutting, improves abrasive belt life; prevents heat discoloration.   Dyn¯uba 103   • Removes abrasive belt build-up of wood and resin residue.  • Apply to grit side of moving abrasive belts and discs.  • 8-1/2" x 1-1/2" x 1-1/2" gum rubber stick.   Dyn¯uba 171   • Easily cleaned.  • For brilliant cut and color on stainless and aluminum.  • Polishing compound for cloth belts and rag wheels. Apply to moving cloth belts or rag wheel.   Part Name Part Number Size Container  60000 11.25 oz Aerosol Can 60005 16 oz. Spray Bottle Dyn¯uba 100 60001 1 Gallon Can 60003 5 Gallon Can 60004 55 Gallon Drum Dyn¯uba 26 60020 1-1/2 lb. Grease Tube Dyn¯uba 103 60030 1/2 lb. Cleaning Stick Dyn¯uba 171 60035            3 lb. Polishing Tube   Lubricants and Grease Help Prevent Downtime   Dynabrade Air Lube (10W/NR)  • Formulated for pneumatic equipment.  • Absorbs up to 10% of its weight in water.  • Prevents rust and formation of gum/sludge for longer tool operation with greater power and less downtime.   Part Number 95821 Part Number 95842 118 ml (4 oz.) 473 ml (1 pt.) Part Number 95843 Part Number 96101 3.8 l (1 gallon) Display Box   • 24 - 118 ml (4 oz.) bottles Grease and Grease Gun  • Multi-purpose grease for all types of bearings, cams, gears.  • High film strength; excellent resistance to water, steam, etc.  • Workable range -18° C to 149° C (0° F to 300° F).   Part Number 95541 Part Number 95542 Push-Type Grease Gun  283.5 g (10 oz.) tube   • One-hand operation.   Gear Oil  Part Number 95848  2.5 oz. (74 ml) tube  • Formulated for Dynabrade geared tools utilizing a wick- type lubrication system.   • Apply every 8 hours of operation into tool’s lubrication fitting.  • Failure to lubricate will cause premature gear failure and void warranty.   • Easy to apply using with Dynabrade P/N 95541 Grease/Oil Gun (shown, sold separately).  NOTE: For non wick-type lubrication systems, use 95542 Gear Grease.   General air tool maintenance begins with motor lubrication   Filter-lubricators, see page 162, are also necessary for greater performance and increased life of air tools. Dynabrade tools must be used with filter-lubricators to maintain all warranties.    2006 Ind Cat_Accessories:2006 Industrial Catalog.qxd  9/27/06  5:46 PM  Page 205     ACCESSORIESACCESSORIES   206 Finesse Sanding Creme and Glaze For use with Dynabrade Buffers   Finesse Sanding Creme  • A sanding compound for metal, fiberglass and composites.    • Use with fine-grade sanding discs.   Part Number 95723 4 oz. (118 ml) Part Number 95724 1 qt. (946 ml) Part Number 95725 1 gal. (3.8 l)   Dynabrade Glaze  • For use with slow-speed tools to  achieve a high gloss after  compounding.   Part Number 95727 4 oz. (118 ml) Part Number 95728 1 qt. (946 ml)   Part Number 95990    • Eliminates the need for a garden hose. Two gallon capacity. Heavy-duty corrosion resistant construction.   • Translucent tank allows easy viewing of liquid level.  • Hand pump manual pressurizes container (50 PSIG maximum pressure). No need for external power source.  • Adjustable “water feed” valves at two locations. Use valve at tool as an on/off switch.   Portable Wet  Tank Assembly Preset your Desired Water Flow with Valve on Tank   Dynamount Bench Mount Mounts Portable Air Tools Securely  Frees operator’s hands   • Tool clamp swivels 180° for set-up versatility.  • Heavy-duty, rugged construction; easily mounts to workbench.  • Stands 9-3/4" tall in the upright position.  • Mounted tool can be rotated within clamp for desired positioning.  Universal Bench Mount  Part Number 80020   • Accepts air tools with motor diameters up to 1-3/4" diameter, such as Dynafile ®.   Part Number 80021   • Has custom worktable. Designed exclusively for Dynafile® II.   Part Number 80022   • Designed exclusively for  Dynabelter® models 11475, 11476 and 11477.   Foot Pedal and Hose Assembly  Part Number 80015    • Connects to bench-mounted air tool; provides on/off foot control of air tool operation.  • Includes 11291 Foot Pedal and 11292 8' Hose  Assembly  (3/8" I.D. x 11/16" O.D.) with two 1/4" NPT male fittings.   Model  80021   Model 80020   2006 Ind Cat_Accessories:2006 Industrial Catalog.qxd  9/27/06  5:46 PM  Page 206     ACCESSORIESACCESSORIES   207   Side Handles Improve Ergonomic Feel   • Improved ergonomic feel with grip-traction to reduce hand fatigue.  • Fits many tool models including Dynastraight®  series, Dynangle®,  pistol-grip tools, wet tools, drills, die grinders and disc sanders.  • Please contact customer service department to mate handle to each tool.   Safety-Lock Throttle Levers Help Prevent Accidental Tool Start-up   • Remove standard throttle  lever from tool and install new safety-lock  lever in seconds.  • Safety-lock levers are available for all Dynabrade air tools.  • Call our customer service department to identify which safety-lock lever fits your tool.   Top Handle Assembly   For use with Two-Hand Tools   Part Number 53147  • Heavy-duty construction; perfectly centered over tool for ideal balance and comfort.  • Compatible with the following tools: - Air-powered models: 51446, 51448, 51458, 51459, 58480, 59485  • Electric-powered models: 51612, 51613, 51614.   Abrasive  Attaches Here!   DynaMitt Sanding Glove Hand-Sanding has Never Been Easier Part Number 58005   • Palm side of DynaMitt accepts hook-face abrasive sheets (sold separately).   • Ideal for sanding contours.  • Easily control pressure and sanding coverage.  • Includes rubber insert for more rigid applications. Insert fits into pocket under hook-face area.   DynaMitt Pack Part Number 58009    • Includes 58005 DynaMitt and rubber insert, plus 93889 Abrasive Sheet Sample Kit (13 abrasive sheets in various grits).   • Optional lightweight hanger easily  attaches to Dynabrade Dynabuffers for  convenient workplace storage.   Part Number 97166   • For use with 3" (76 mm) dia. Dynabuffer.   Part Number 97165   • For use with 5" (127 mm) dia. Dynabuffer.   Tool Hangers For use with Dynabuffers   2006 Ind Cat_Accessories:2006 Industrial Catalog.qxd  9/27/06  5:46 PM  Page 207     BANDS Coated Abrasive Bands .......................... 214 Non-Woven Nylon Bands  ........................ 214 BELTS Coated Abrasive Belts ............................ 209 Cloth Polishing Belts .............................. 213 Non-Woven Nylon Belts  .......................... 212 DISCS 3M™ Clean ’n Strip™ Discs ...................... 218 Coated Abrasive Discs ............................ 216 Non-Woven Nylon Discs .......................... 215 NewEdge Scalloped-Edge Abrasive Discs ...... 215 Scotch-Brite™ Bristle Discs ...................... 218 FLAPS Dynascaler Flaps, Hub ............................ 221 FILES Reciprocating Files ................................ 223   ROLLS Coated Abrasive Rolls ............................ 221 SAW BLADES Bi-Metal Reciprocating Saw Blades ............ 223 SHEETS Coated Abrasive Sheets .......................... 220 DynaMitt Sheets .................................. 221 Non-Woven Nylon Sheets ........................ 221 STARS Coated Abrasive Sanding Stars .................. 219 STRIPS Coated Abrasive Strips............................ 220 WHEELS 3M™ Green Corps™ Cut-Off Wheels ............ 222 Coated Abrasive Flap Wheels .................... 219 Depressed Center Wheels ........................ 222 Diamond Cut-Off Wheels.......................... 222 Non-Woven Nylon Wheels ........................ 218     DC   A/O   3M   DC   A/O   3M   DC   A/O   3M   Coated Abrasive Belts For Use With Portable Belt Tools   The Choice is Yours!   ABRASIVES AND FILESABRASIVES AND FILES 209   7-1/2"  (191 mm)   9-3/4"  (248 mm)   10-11/16"  (271 mm)   12"  (305 mm)   – 90631 90632 90633 – – – – – – – 90634 90635 90636 – 92260 92261 92262 – – – 89150 89151 89152 89153 – – – 92100 92101 92102 92103 – – – – 90613 90614 90615 90268 90269 90270 – – – 90600 90601 – 90602 – – 89002 89003 – – – – – 92206 92207 – – – – – – – 92208 92209 92210 89005 89006 89007 89008 – – – 92105 92106 92107 92108 – – – – 91425 91426 91427 92118 92119 92120 89010 89011 89012 89013 – – – 92110 92111 92112 92113 – – – – 91428 91429 91430 92114 92115 92116   3M 577F  Premium grade belts. The 577F Cubicut Polycut is a premium grade of  zirconia  alumina  from 3M.    The self- sharpening  characteristic of the microcrystalline  structure is combined with heavy strength polyester cloth making these belts superior. We recommend these belts for optimum  performance on our tools.   Dynabrade offers abrasive belts in three varieties to fit the preference & budget of every operator   Coated Abrasive Belts   3M Dynacut  These  zirconia  alumina abrasive belts cut faster and last longer than most coated  abrasive products when grind- ing steel or stainless steel with Dynabrade small belt tools. The belts are very sharp and are excellent for use on most metals, including aluminum and titanium, when lubricated properly (use Dyn ¯uba 100 spray lubricant; part number 60000).   DC Aluminum Oxide  Abrasive belts con- structed of  the most popular  man-made abrasive: aluminum oxide. Aluminum oxide is tough and known for its high speed  penetration of materials such as carbon steel, alloy steel, tough bronze and hard wood without excessive fracturing of the grain. Excellent all-around abrasive belts for everyday use.   A/O   A/O   DC   3M  A/O   DC   A/O   3M   3" Diameter Pneumatic Wheels  2-1/4" Dia. Pneumatic Wheels Mini-Dynafile ® II  3-1/4" Dia. Pneumatic Wheels   3"  (76 mm)   2-1/4"  (57 mm)   3"  (76 mm)   7"  (178 mm)   1/8"  (3 mm)   1/4"  (6 mm)   1/2"  (13 mm)   Length For Use With These Dynabrade Tools Width 40 Grit 60 Grit 80 Grit 120 Grit 180 Grit 220 Grit 320 Grit     DC   A/O   3M   DC   A/O   3M   DC   A/O   3M   DC   A/O   3M   DC   DC   A/O   A/O   3M   DC   A/O   3M   DC   A/O   3M   DC   A/O   3M   3M   DC   3M   DC   Coated Abrasive Belts  (Cont’d)  For Use With Portable Belt Tools   ABRASIVES AND FILESABRASIVES AND FILES 210   A/O  DC  3M   A/O  A/O   DC  3M   89185 89186 89187 89188 – – – 90194 90195 90196 90197 – – – 89181 89182 89183 89184 – – – 90190 90191 90192 90193 – – – – 89166 89167 89168 – – – 90009 90017 90018 90020 – – – – 90076 90077 90078 90026 90011 90012 – 89171 89172 89173 89174 – – – 90272 90273 90275 – – – – 90353 90354 90355 90277 90338 90339 – – – 90603 90604 – 90605 – – 89032 89033 – – – – – 92230 92231 – – – – 90211 92228 92229 92232 92233 92234 89035 89036 89037 89038 – – – 92125 92126 92127 92128 – – – – 91114 91115 91116 90224 90225 90226 89040 89041 89042 89043 – – – 92130 92131 92132 92133 – – – – 91117 91118 91119 90244 90245 90246 89045 89046 89047 89048 – – – 92135 92136 92137 92138 – – – – 91123 91124 91125 90254 90255 90256 89050 89051 89052 89053 – – – 92140 92141 92142 92143 – – – – 91126 91127 91128 90288 90289 90290 90640 90641 90642 90643 – – – – – – – 90334 90335 90336 – – 89072 89073 – – – – – 90456 90457 – – – – 90405 – – 90410 90411 90412 89075 89076 89077 89078 – – – 92155 92156 92157 92158 – – – – 91434 91435 91436 90423 90424 90425 89080 89081 89082 89083 – – – 92160 92161 92162 92163 – – – – 91437 91438 91439 90449 90451 90453   1"  (25 mm)   1-1/2"  (38 mm)   2-3/4"  (70 mm)   3-1/2"  (89 mm)   7"  (178 mm)   1/8"  (3 mm)   1/4"  (6 mm)   1/2"  (13 mm)   3/4"  (19 mm)   1"  (25 mm)   3/4"  (19 mm)   1/8"  (3 mm)   1/4"  (6 mm)   1/2"  (13 mm)   Dynangle  Dynafile ® III  Electric Dynafile ® II  Dynafile ® II   Dynafile ®   Dynafile ® II  5" Diameter Pneumatic Wheels   Length For Use With These Dynabrade Tools Width 40 Grit 60 Grit 80 Grit 120 Grit 180 Grit 220 Grit 320 Grit  3M 3M 577F DC Dynacut A/O Aluminum Oxide   15-1/2"  (394 mm)   18"  (457 mm)   20-1/2"  (521 mm)   24"  (610 mm)     3M   3M   3M   A/O   DC   A/O   DC   A/O   DC   DC   3M   A/O   A/O   3M   A/O   A/O   3M   A/O   DC   3M   A/O   DC   3M   A/O   DC   3M   DC   3M   A/O   A/O   3M   DC   ABRASIVES AND FILESABRASIVES AND FILES   211   Dynafile ® III “Take-About” Sander Dynafile ® utilizing 11244 Contact Arm   Coated Abrasive Belts  (Cont’d)  For Use With Portable Belt Tools   A/O  DC  3M   Length For Use With These Dynabrade Tools Width 40 Grit 60 Grit 80 Grit 120 Grit 180 Grit 220 Grit 320 Grit   8-1/4" Dia. x 9" Long Pneumatic Wheels   Dynabelter ®   Dynangle II   Versatility Grinders   3M 3M 577F DC Dynacut A/O Aluminum Oxide   1"  (25 mm)   3"  (76 mm)   9"  (229 mm)   1/4"  (6 mm)   1/2"  (13 mm)   1"  (25 mm)   2"  (51 mm)   1/4"  (6 mm)   1/2"  (13 mm)   3/4"  (19 mm)   2"  (51 mm)   1/2"  (13 mm)   1/4"  (6 mm)   1/2"  (13 mm)   1"  (25 mm)   24" Cont’d  (610 mm)   26-5/16"  (610 mm)   30"  (762 mm)   34"  (610 mm)   44"  (864 mm)   72"  (183 cm)   89085 89086 89087 89088 – – – 92165 92166 92167 92168 – – – – – – – 90486 90487 90488 84829 84830 84831 84833 – – – 92170 92171 92172 92173 – – – – – – 90606 90607 – – 89095 89096 89097 89098 – – – 92175 92176 92177 92178 – – – – – – – 90471 90472 90473 89100 89101 89102 89103 – – – 92180 92181 92182 92183 – – – 90671 90672 90673 – – – 89105 89106 89107 89108 – – – 92185 92186 92187 92188 – – – – 90674 90675 90676 90512 90513 90514 89110 89111 89112 89113 – – – 92190 92191 92192 92193 – – – – 90677 90678 90679 90390 90391 90392 – 90475 90477 90479 – – – – 84815 84816 84817 – – – – 90495 90497 90499 – – – – 90367 90368 90370 – – – – 84818 84819 84820 – – – – 90377 90378 90380 – – – – 84821 84822 84823 – – – – 90545 90547 90549 – – – 84807 84771 84777 84789 84795 – – 94807 94771 94777 94789 – – – – – – – 94795 94801 – 84808 84772 84778 84790 84796 – – 94808 94772 94778 94790 – – – – – – – 94796 94802 – 84809 84773 84779 84791 84797 – – 94809 94773 94779 94791 – – – – – – – 94797 94803 –     3M   3M   3M   A/O   DCDC   3M   A/O   3M   DB   DB   DB   3M   ABRASIVES AND FILESABRASIVES AND FILES   212 Coated Abrasive Belts  (Cont’d)  For Use With Portable Belt Tools   Length For Use With These Dynabrade Tools Width 40 Grit 50 Grit 60 Grit 80 Grit 120 Grit 180 Grit 220 Grit  3M 3M 577F DC Dynacut   Non-Woven Nylon Belts For Use With Portable Belt Tools   DB  SE Coarse Coarse Medium Very Fine Super Fine Type T Polish.  Length For Use With These Dynabrade Tools Width Brown Maroon Blue Grey White   72" Cont’d  (183 cm)   78"  (198 cm)   104"  (264 cm)   – – 90092 90091 90090 – – – 90095 90094 90093 – – 89213 89212 89211 89210 90048 – 90239 90238 90237 90219 – – – 90098 90097 90096 – 90315 90314 90313 90312 90311 –   3"  (76 mm)   2-1/4"  (57 mm)   3"  (76 mm)   7"  (178 mm)   1/2"  (13 mm)   7-3/8"  (187 mm)   9-5/8"  (244 mm)   10-11/16"  (271 mm)   12"  (309 mm)   2-1/4" Dia. Pneumatic Wheels   3" Diameter Pneumatic Wheels   3-1/4" Dia. Pneumatic Wheels   Mini-Dynafile ® II   120  Length For Use With These Dynabrade Tools Width Grit   913861/2"  (13 mm) 24"  (610 mm) Dynafile ® III   Scalloped Abrasive Belts 3M 3M 777F   3M Scotch-Brite ™ Surface Conditioning Belts DB Dynabrade Non-Woven Nylon   3M   84810 – 84774 84780 84792 84798 – – – – – – 94798 94804 84811 – 84775 84781 84793 84799 – 94811 – 94775 94781 94793 – – – – – – – 94799 94805 94812 – 94776 94782 94794 – – – 89226 – 89228 – – – – 89225 – 89227 – – –   1-1/2"  (38 mm)   2"  (51 mm)   2"  (51 mm)   1"  (25 mm)   1-1/2"  (38 mm)   Versatility Grinders Band Saw Blade Grinders  Versatility Grinders     3M   3M   3M   3M   3M   ABRASIVES AND FILESABRASIVES AND FILES   213   3M   3M   3M   3M   DB   3M   DB   3M   3M   3M   3M   3M   Non-Woven Nylon Belts  (Cont’d)  For Use With Portable Belt Tools   3M  3M  3M   SE Coarse Coarse Medium Very Fine Super Fine Type T Polish.  Length For Use With These Dynabrade Tools Width Brown Maroon Blue Grey White  – 89233 89232 89231 – – – 90023 90022 90021 90013 – 89244 89243 89242 89241 89240 – – 90283 90282 90281 90014 – – 90231 90229 90228 90158 – – 90297 90292 90248 90159 90052 – 90299 90294 90258 90161 90053 – 90300 90295 90259 90162 – – 90460 90433 90403 90397 – – 90461 90434 90400 90398 90054 – 90462 90416 90402 90399 – – 90459 90458 90404 90396 – – 90442 90436 90406 – – – 90444 90437 90401 – – – 90448 90438 90414 – – – 90374 90373 90371 – – – – – 93735 93729 – – 93746 93741 93736 93730 – – 93747 93742 93737 93731 – – 93749 93744 93739 93733 –   2-3/4"  (70 mm)   3-1/2"  (89 mm)   1/4"  (6 mm)  1/2"  (13 mm)  3/4"  (19 mm)  1"  (25 mm)   1/4"  (6 mm)  1/2"  (13 mm)  1"  (25 mm)  3"  (76 mm)   1/2"  (13 mm)  1"  (25 mm)  2"  (51 mm)   2"  (51 mm)   1/4"  (6 mm)  1/2"  (13 mm)  1"  (25 mm)  2"  (51 mm)   15-1/2"  (394 mm)   18"  (457 mm)   24"  (610 mm)   30"  (762 mm)   34"  (864 mm)   72"  (183 cm)   5" Diameter Pneumatic Wheels   Dynafile ® II,  Electric Dynafile ® II, Dynafile ® III,  Dynangle   Dynafile ®   Dynabelter ®   Dynangle II   Versatility Grinders   3M Scotch-Brite ™ Surface Conditioning Belts DB Dynabrade Non-Woven Nylon   Cloth Polishing Belts For Use With Portable Belt Tools Part  Length For Use With These Dynabrade Tools Width Number   900101/2"  (13 mm) 24"  (610 mm) Dynafile ®     DC   DC   DC   DC   DC   DC   DC   DC   DC   DC   DC   DC   DC   DC   ABRASIVES AND FILESABRASIVES AND FILES   214 Coated AbrasiveBands For Use With Expander Wheels   DC DC DC DC DC DC   Length Width 36 Grit 60 Grit  80 Grit  120 Grit  – – 91069 91072 – – 91070 91073 – – 91071 91074 – – 91078 91081 – – 91079 91082 – – 91080 91083 – – 91087 91090 – – 91088 91091 – – 91089 91092 90700 90712 90724 90736 90701 90713 90725 90737 – 90719 90731 90743 90702 90714 90726 90738 – 90720 90732 90744 90703 90715 90727 90739 – 90721 90733 90745 90704 90716 90728 90740 – 90723 90735 90747 90705 90717 90729 90741 – 90706 90708 90710   1"  (25 mm)  1-1/2"  (38 mm)  2"  (51 mm)   1"  (25 mm)  1-1/2"  (38 mm)  2"  (51 mm)   1"  (25 mm)  1-1/2"  (38 mm)  2"  (51 mm)   1"  (25 mm)  2  (51 mm)  3"  (76 mm)   1"  (25 mm)  1-1/2"  (38 mm)  2"  (51 mm)  3"  (76 mm)   1"  (25 mm)  1-1/2"  (38 mm)  2"  (51 mm)  3"  (76 mm)   1"  (25 mm)   1-1/2"  (38 mm)   2"  (51 mm)   3"  (76 mm)   4"  (102 mm)   5"  (127 mm)   DC Dynacut Zirconia Alumina   DB   DB   DB   DB   DB   DB   DB   DB   DB   DB   DB   DB   DB   DB   Non-Woven NylonBands For Use With Expander Wheels   DB DB DB DB DB DB   Coarse Medium Length Width Brown Maroon  90810 90760 90811 90761 90812 90762 90813 90763 90814 90764 90815 90765 90816 90766 90817 90767 90818 90768 90748 90754 90749 90755 90820 90770 90750 90756 90821 90771 90751 90757 90822 90772 90752 90758 90824 90774 90753 90759 90825 90775   1"  (25 mm)  1-1/2"  (38 mm)  2"  (51 mm)   1"  (25 mm)  1-1/2"  (38 mm)  2"  (51 mm)   1"  (25 mm)  1-1/2"  (38 mm)  2"  (51 mm)   1"  (25 mm)  2  (51 mm)  3"  (76 mm)   1"  (25 mm)  1-1/2"  (38 mm)  2"  (51 mm)  3"  (76 mm)   1"  (25 mm)  1-1/2"  (38 mm)  2"  (51 mm)  3"  (76 mm)   1"  (25 mm)   1-1/2"  (38 mm)   2"  (51 mm)   3"  (76 mm)   4"  (102 mm)   5"  (127 mm)   DB Dynabrade Non-Woven Nylon     ABRASIVES AND FILESABRASIVES AND FILES   215   Coated Non-Woven Nylon, for Hook-Face Pad Sample Kits  NewEdge Scalloped-Edge Abrasive Discs   DB  DB   For Use With These Vacuum Medium Fine Diameter Dynabrade Tools Type Maroon Gray   Non-Vac 92585 92586 Non-Vac 92595 92596 Vacuum 92605 92606   3-1/2"  (89 mm)   5"  (127 mm)   DB Dynabrade   Random Orbital and  Gear-Driven Sanders   DB   Kit Part Diameter No.   DB   Kit Part Diameter No.   92353 3-1/2"  (89 mm) DB   Vacuum Kit Part Diameter Type No.  Non-Vac 92350 Vacuum 92351  5"  (127 mm)   A/O   A/O   For Use With These Connects Vacuum 80 120 100 60 30 Diameter Dynabrade Tools to Type Grit Grit Micron Micron Micron   Hook-Face Non-Vac 92580 92581 92582 92583 92584 Hook-Face Non-Vac 92590 92591 92592 92593 92594 Hook-Face Vacuum 92600 92601 92602 92603 92604   3-1/2"  (89 mm)   5"  (127 mm)   Each kit contains 3 of each NewEdge Scalloped-Edge  abrasive disc listed, relative to diameter and vacuum type.   A/O Aluminum Oxide   Non-Woven Nylon Discs  3M  3M  3M  3M  3M  3M  3M  3M   Mini-Dynorbital ®  Disc Sanders Hook-Face – – 90858 90856 – – Hook-Face – – 90862 90860 – – Roloc™ – 90872 90873 90874 90875 – Roloc™ – 90876 90877 90878 90879 – Roloc™ 90863 90867 90868 – – – Hook-Face – – – 91400 91402 91401 Hook-Face – 93970 93971 93972 93973 – Hook-Face – 93930 93931 93932 93933 –   3/4"  (19 mm)   1-/4"  (32 mm)   2"  (51 mm)   3"  (76 mm)   4"  (102 mm)   11-1/4"  (286 mm)   Tear Drop Triangular   4" (102 mm) Dia.  Disc Sanders   Random Orbital and Gear-Driven Sanders   Dynafine ®   Sanders   3M Scotch-Brite ™ Surface Conditioning    Random Orbital and Gear-Driven Sanders   2" (51 mm) and 3" (76 mm) Dia.  Disc Sanders   Connects SE Coarse Coarse Medium Very Fine Super Fine Ultra Fine  Dimensions For Use With These Dynabrade Tools to Brown Maroon Blue Gray White     A/O   A/O   A/O   3M   3M   DC   A/O   DC   A/O   ABRASIVES AND FILESABRASIVES AND FILES   216 Coated Abrasive Discs   3M 3M Stikit Gold 216U 3M 3M Regalite 751U A/O Aluminum Oxide DC Dynacut   2" (51 mm) Dia. Disc Sanders Random Orbital Sanders Random Orbital and  Gear-Driven Sanders   3M   A/O   SC   Micro-Finishing Film   Connects Vacuum Number 80 120 180 220 1,000 Diameter For Use With These Dynabrade Tools to Type of Holes Grit Grit Grit Grit Grit   PSA Non-Vac 0 – – – – 93183 PSA Non-Vac 0 93271 93272 93274 93275 – PSA Non-Vac 0 – – – – 93191 PSA Non-Vac 0 93280 93281 93283 93284 –   3/4"  (19 mm)   1-1/4"  (32 mm)  A/O   SC   11-1/4"  (286 mm)  Random Orbital and  Gear-Driven Sanders   SC Silicon Carbide A/O Aluminum Oxide   Dynafine ®   Sanders Mini-Dynorbital ®  Disc Sanders   Hook-Face  Non-Vac 0 91320 91321 91322 91323 91324 Vacuum “O-Style” 91325 91326 91327 91328 91329   For Use With These  Connects Vacuum Number 100 80 60 30 15 Diameter Dynabrade Tools to Type of Holes Micron Micron Micron Micron Micron   3M   3M   Connects Vacuum Number 36 40 60 80 100 120 150 180 220 320 Diameter For Use With These Dynabrade Tools to Type of Holes Grit Grit Grit Grit Grit Grit Grit Grit Grit Grit  2"  (51 mm)   3"  (76 mm)   3-1/2"  (89 mm)   5"  (127 mm)   6"  (152 mm)   8"  (203 mm)   11-1/4"  (286 mm)   Tear-Drop Triangular   PSA Non-Vac 0 – – – 92040 – 92046 – – – – Hook-Face Vacuum 3 – – – 92056 – 92057 – 92058 92059 92060 PSA Non-Vac 0 – – – 92090 – 92092 – 92094 92095 92097 Hook-Face Non-Vac 0 – – – 93101 93102 93103 – 93105 93106 – Vacuum 5 – – – 93109 93110 93111 – 93113 93114 – Hook-Face Non-Vac 0 – 93312 93313 – – – – – – – Vacuum 5 – 93309 93310 – – – – – – – Hook-Face Non-Vac 0 – – – 93200 93201 93202 – 93204 93205 – Vacuum 6 – – – 93215 93216 93217 – 93219 93220 – Hook-Face Non-Vac 0 – 93318 93319 – – – – – – – Vacuum 5 – 93315 93316 – – – – – – – PSA Non-Vac 0 – 91235 – 91237 – 91239 – – – – Vacuum 8 – 91247 – 91249 – 91251 – – – – Hook-Face Non-Vac 0 – 91444 – 91446 – 91448 – – – – Vacuum 8 – 91456 – 91458 – 91460 – – – – Hook-Face Non-Vac 0 91315 – 91316 91300 – 91301 – 91302 – – Vacuum “O-Style” 91317 – 91318 91303 – 91304 – 91305 – – PSA Non-Vac 0 – – – 93993 – 93994 93995 93996 – – Hook-Face Non-Vac 0 – – – 93953 – 93954 93955 93956 – – PSA Non-Vac 0 – – – 93983 – 93984 93985 93986 – – Loop Non-Vac 0 – – – 93913 – 93914 93915 93916 – –     A/O   A/O   ABRASIVES AND FILESABRASIVES AND FILES   217  Coated Abrasive Discs  (Cont’d)   Flap Discs Locking-Type A/O Aluminum Oxide   2"  (51 mm)   3"  (76 mm)   40 60 80 120 Diameter For Use With These Dynabrade Tools Grit Grit Grit Grit   90970 90971 90972 90973 90924 90925 90926 90927   DC   Locking-Type   3" (76 mm) Dia.  Vacuum Disc Sanders 3"  (76 mm)   36 50 80 Diameter For Use With These Dynabrade Tools Grit Grit Grit   92041 92042 92043   3M   3M   3M™ Ceramic Coated Discs Roloc ™   36 50 60 80 100 120 Diameter For Use With These Dynabrade Tools Grit Grit Grit Grit Grit Grit   3M 4" (102 mm) Dia.  Disc Sanders   3M 4-1/2" (114 mm) Dia.  Disc Sanders   2"  (51 mm)   3"  (76 mm)   4"  (102 mm)   4-1/2"  (114 mm)   – – 92027 92028 – 92029 – – 92031 92032 – 92033 92047 – 92049 92050 – – – 92052 – 92053 92054 92055   DC Dynacut Zirconia Alumina   3M 3M 777F   2" (51 mm) and 3" (76 mm) Dia.  Disc Sanders 2" (51 mm) and 3" (76 mm) Dia.  Disc Sanders   3M   3M   Connects Vacuum Number A35 A10 A5 Diameter For Use With These Dynabrade Tools to Type of Holes Green Blue Orange   Hook-It™ II Non-Vac 0 – – 93192 Hook-It™ II Non-Vac 0 91405 91406 91407   1-1/4"  (19 mm)   11-1/4"  (286 mm)   3M™ Trizact™ Abrasive Discs 3M 3M™ Trizact ™   Mini-Dynorbital ®  Disc Sanders   Random Orbital and Gear-Driven Sanders     ABRASIVES AND FILESABRASIVES AND FILES   218  Scotch-Brite™ Bristle Discs 3M 3M   3M   3M   Maximum 50 Grit 80 Grit 120 Grit Length For Use With These Dynabrade Tools RPM Green Yellow White   Dynastraight ®   Dynisher   Non-Woven Nylon Wheels Abrasive Impregnanted 3M Scotch-Brite ™ Surface Conditioning    A/O   A/O   A/O   3M   Center Length For Use With These Dynabrade Tools Dia. Hole Coarse Medium   1" (25 mm) – 90871 1" (25 mm) – 90866 1" (25 mm) – 90865 1" (25 mm) 90870 90864   3"  (76 mm)   1"  (25 mm)  2"  (51 mm)  4"  (102 mm)   4"  (102 mm)   6"  (152 mm)   Dynastraight ®   3M™ Clean ’n Strip™ Discs 3M 3M™ SXCRS   3M   3M   3M   Center Length For Use With These Dynabrade Tools Dia. Hole Coarse   1" (25 mm) 90890 1" (25 mm) 90883 1" (25 mm) 90886   4"  (102 mm)   5"  (127 mm)  6"  (152 mm)   1/4"  (6 mm)   1/2"  (13 mm)   3M 4-1/2" (114 mm) Dia.  Disc Sanders   2"  (51 mm)   3"  (76 mm)   4-1/2"  (114 mm)   25,000 92015 92016 92017 15,000 92021 92022 92023 12,000 90915 90916 90917   2" (51 mm) and 3" (76 mm) Dia.  Disc Sanders   Coated Abrasive Discs  (Cont’d)  3M™ Cerium Oxide 568XA Discs 3M 3M™ Cerium Oxide 568XA   3M   Connects Vacuum Number 3M Diameter For Use With These Dynabrade Tools to Type of Holes 568XA   Hook-It™ II  Non-Vac 0 91408 11-1/4"  (286 mm) Random Orbital and Gear -Driven Sanders     ABRASIVES AND FILESABRASIVES AND FILES   219   Dynastraight ®  Flapper   Dynisher   Coated Abrasive Flap Wheels A/O Aluminum Oxide   A/O   A/O   Wheel Center 40 50 60 80 120 Length For Use With These Dynabrade Tools Width Thread Hole Grit Grit Grit Grit Grit   1/4"-20 Female – – – 90830 90831 – – 3/4" – – – 90851 –(19 mm)   1"  (25 mm)   4"  (102 mm)   2-1/2"  (64 mm)   4"  (102 mm)   A/O Dyninger   A/O   Coated Abrasive Sanding Stars   Shank 80 120 150 180 220 320 400 Diameter For Use With These Dynabrade Tools Dia. Grit Grit Grit Grit Grit Grit Grit   93166 93167 93168 93169 93171 93172 93173 4"  (102 mm)   A/O Aluminum Oxide   Lightweight Dyninger  1/4"  (6 mm)   Lightweight Dyninger   Spindle-Mount Stars   A/O   Center 80 120 150 180 220 320 400 Diameter For Use With These Dynabrade Tools Hole Grit Grit Grit Grit Grit Grit Grit   93392 93393 93394 93395 93396 93397 93398 93243 93245 93246 93247 93248 93251 93252   4"  (102 mm)   8"  (203 mm)   A/O Aluminum Oxide   1/2"  (13 mm)   1"  (25 mm)   Arbor-Mount Stars   A/O   Lightweight Dyninger   A/O   Center 80 120 150 180 220 320 400 Diameter For Use With These Dynabrade Tools Hole Grit Grit Grit Grit Grit Grit Grit   A/O Aluminum Oxide Eyelet Stars   A/O  A/O  A/O  A/O   93579 93580 93581 93582 93583 – – 93586 93587 93588 93589 93590 – – 93541 93542 93543 93544 93545 93546 93547 93551 93552 93553 93554 93555 93556 93557 93558 93559 93560 93561 93562 93563 93564 93565 93566 93567 93568 93569 – –   3/4"  (19 mm)   1"  (25 mm)   1-1/2"  (38 mm)   2"  (51 mm)   3"  (76 mm)   4"  (102 mm)   3-48 3-48 8-32 1/4"-20 1/4"-20 1/4"-20     A/O Dynafine ® Raised Panel Sander   A/O   Dynabug ®  “Model T” and Dynabug ® II with Cli ps   A/O   A/O   ABRASIVES AND FILESABRASIVES AND FILES 220   A/O   A/O   Coated Abrasive Sheets   Dimensions Connects Vacuum Number 80 100 120 150 180 220 320 400 600 Width x Length For Use With These Dynabrade Tools to Type of Holes Grit Grit Grit Grit Grit Grit Grit Grit Grit   75 mm x 110 mm 81 mm x 133 mm 3-1/2" x 2-3/4" (89 mm x 70 mm)   3-2/3" x 7" (93 mm x 178 mm)   100 mm x 148 mm 4-1/2" x 7/8" (114 mm x 22 mm)   4-1/2" x 4-1/4" (114 mm x 108 mm)   SC Silicon Carbide  A/O Aluminum Oxide   Dynabug ® IISanders   SC   Dynabug ® IISanders Dynafine ®  Backsplash Sander Dynabug ®  and Dynaline Sanders   PSA  Non-Vac 0 – – – 93760 93761 93762 93763 – – Vacuum 4 – – – 93765 93766 93767 93768 – – Hook-Face Non-Vac 0 – – – 93785 93786 93787 93788 – – Vacuum 4 – – – 93890 93891 93892 93893 – – PSA  Non-Vac 0 – – – 93770 93771 93772 93773 – – Vacuum 8 – – – 93775 93776 93777 93778 – – Non-Vac 0 – – – 93791 93792 93793 93794 – – Hook-Face  Vacuum  8 – – – 93895 93896 93897 93898 – – 8 (4+4) – – – 93934 93935 93936 93937 – – PSA Non-Vac 0 – – 93130 93131 93132 – – – – PSA Non-Vac 0 93810 – 93812 – 93814 93815 93816 – – Hook-Face Non-Vac 0 – 93801 – 93803 93804 – – – – Hook-Face Vacuum 7 (Delta) – – – 93796 93797 93798 93799 – – Hook-Face Non-Vac 0 – – 93670 93671 93672 93673 – – – Hook-Face Non-Vac 0 93850 – 93851 – 93852 – 93853 – –   Dynabug ® II Sanders with 56323 Sanding Pad   Coated Abrasive Strips  A/O A/O   A/O A/O   Length For Use With These Dynabrade Tools Width 120 Grit 180 Grit 240 Grit   Dynafine ®  Finger Sander   A/O Aluminum Oxide   2"  (51 mm)   6"  (152 mm)   3/8"  (10 mm)  3/4"  (19 mm)   1/4"  (6 mm)  1/2"  (13 mm)   93940 93941 93942 93943 93944 93945 90960 90967 – 90955 90957 –     Dynafine ® Raised Panel Sander   ABRASIVES AND FILESABRASIVES AND FILES 221   A/O   A/O   DynaMitt Sheets   Dimensions Connects Backing 80 120 180 320 400 600 Width x Length For Use With These Dynabrade Tools to Type Weight Grit Grit Grit Grit Grit Grit  4-3/4" x 7-7/8" (121 mm x 200 mm)   A/O Aluminum Oxide, Gold A/O Aluminum Oxide   DynaMitt Sanding Glove   DynaMitt Sanding Glove   Hook-Face Paper N/A 93882 93883 93884 93885 93887 93888 Hook-Face Cloth J 93880 – 93881 – – –   3M   3M   Coated Abrasive Rolls Dynascaler Flaps and Hub  Non-Woven Nylon Sheets   Connects 80 100 120 150 180 Width For Use With These Dynabrade Tools to Grit Grit Grit Grit Grit  2-3/4"  (70 mm)   3-2/3"  (93 mm)   3M 3M Stikit Gold 216U   Dynaline Sanders Dynabug ® Sanders   PSA 93000 93001 93002 93003 93004 PSA 93030 – 93032 93033 93034   Non-Woven Nylon  Coated  Sample Kits   DB   Dimensions For Use With These Dynabrade Tools Very Fine   93886 4-3/4" x 7-7/8" (121 mm x 200 mm)   DB Dynabrade   Dynascaler   Flaps,  Type C   3M   Flap Size For Use With These Dynabrade Tools Heavy Duty   39002 2"  (51 mm)   3M 3M™ Roto Peen   3M   DB   Dimensions For Use With These Dynabrade Tools Medium Fine Very Fine Super Fine   – – 94956 – 93674 – 93675 93676   4" x 7" (102 mm x 178 mm)   4-1/2" x 7/8" (114 mm x 22 mm)   3M 3M™ Scotch-Brite ™ Clean ’n Finish DB Dynabrade Non-Woven Nylon   DB   Kit Part Dimensions No.   93889 4-3/4" x 7-7/8" (121 mm x 200 mm)   Each kit contains:  1 non-woven nylon sheet 1 each of 180-600 grit paper sheets 2 each of 80/120 grit paper sheets 2 each of 80/180 cloth sheets   Dynaline Sanders   Dynascaler   Hub   DB   Width For Use With These Dynabrade Tools Part No.   30330 2-1/4"  (57 mm)   DB Dynabrade     ABRASIVES AND FILESABRASIVES AND FILES   222  Diamond Cut-Off Wheels   Center Wheel Diamond Part Diameter For Use With These Dynabrade Tools Arbor Hole Thickness Grit Wrap Wheel Type No.   3" (76 mm) Dia.  Cut-Off Wheel Tools 4" (102 mm) Dia.  Cut-Off Wheel Tools 4-1/2" (114 mm) Dia.  Cut-Off Wheel Tools 5" (127 mm) Dia. Cut-Off Wheel Tools   – 3/8"  (10 mm)   3/4" – (19 mm)   – 3/8"  (10 mm)   3/4" – (19 mm)   Continuous Rim 93917 3/32" (2 mm) 1/8" (3 mm)  Side Spoked 93646 Continuous Rim 93920 3/32" (2 mm) 1/8" (3 mm) Side Spoked 93649 Gulleted/Slotted 93661 3/32" (2 mm) 1/8" (3 mm) Gulleted/Slotted 94912 Continuous Rim 93921 3/32" (2 mm) 1/8" (3 mm) Side Spoked 93650 Gulleted/Slotted 93662   3"  (76 mm)   4"  (102 mm)   4-1/2"  (114 mm)   5"  (127 mm)   ContinuousRim Side Spoked Gulleted/Slotted   3M™ Green Corps™ Cut-Off Wheels 3/8" (10 mm) Center Hole 3M 3M   3" (76 mm) or 4" (102 mm) Cut-Off Wheel Tools  3M   3M   24 Diameter For Use With These Dynabrade Tools Thickness Grit   94910 94911   3"  (76 mm)   4"  (102 mm)   1/16"  (2 mm)   1/32"  (1 mm)   Reinforced Depressed Center Wheels   2" (51 mm) Dia.  Depressed Center Wheel Grinders   Type 27   A/O   Diameter For Use With These Dynabrade Tools Center Hole 24 Grit   90999 2"  (51 mm)   A/O Aluminum Oxide   3/8"  (10 mm)     ABRASIVES AND FILESABRASIVES AND FILES   223   Reciprocating Files   File Shank Part Length For Use With These Dynabrade Tools Type Cut Type Dia. Shape Number   Dynadie ® III Reciprocating Filers  Dynadie ® III   Equaling 90900 Square 90910 Straight Medium Cut 1  Three Square 90920 Half Round 90930 Crochet 90940 Round 90950 Equaling 90901 Square 90911 Curved Fine Cut 1  Three Square 90921 Half Round 90931 Crochet 90941 Round 90951   3-1/2"-4" (89 mm-102 mm)   Bi-Metal Reciprocating Saw Blades   Teeth per Part Length x Width For Use With These Dynabrade Tools Thickness Shank Inch Shape Number   Reciprocating Saws .05"  1/2" (13 mm) 6 90934(1.3 mm)  18 90937 .035" 1/2" (13 mm)(0.9 mm)  10 90939   6" x Taper  (152 mm x Taper)   6" x 3/4"  (152 mm x 19 mm)   1/8"  (3 mm)   1/8"  (3 mm)   Shank “00” “0” Length For Use With These Dynabrade Tools Dia. Shape Very Coarse Coarse   Pillar 90980 90985 Half Round 90981 90986 Round 90982 – Triangular 90983 90988 Square 90984 90989 Foundry 90985 –   6"  (152 mm)   5/32"  (4 mm)   1/4"  (6 mm)   1/8" - 1/4" Tapered  (3 mm - 6 mm)     Safety Comes First .................................. 225 Safety Guidelines .................................... 226 Recommended Air System .......................... 227 Selecting a Compressor ............................ 228   Maintaining Adequate Air Flow .................... 229 Healthy Work Environment.......................... 230 Numerical Index of Tools ............................ 231     225   PRODUCT & SAFETY INFORMATIONPRODUCT & SAFETY INFORMATION   General Safety Information  • Do not use Dynabrade ® Abrasive Power Tools for anything other than their intended application.  • For best performance, use a recommended air line filter-regulator- lubricator to always maintain 90 PSIG (6.2 Bar), unless otherwise stated. Pressure should be checked at the tool inlet while the tool is running.  • Do not expose air tool to inlet pressure above 90 PSIG (6.2 Bar).  • Always use recommended air hose, fittings and couplers and inspect them for wear and damage and replace when necessary.  • On regular basis check free speed of power tool with tachometer to ensure proper functionality of tools.  • A tool with unusual sound and /or vibration must not be operated and must be inspected and repaired. Hand/wrist/arm injury may result from repetitive motion or prolonged exposure to vibration.   • A preventative maintenance schedule is recommended to insure the proper functionality of power tools.  • Never lubricate or clean tools with flammable or volatile liquids.   • Dynabrade® Power tool labels must be legible at all times. If not, reorder label(s) and replace.  • To prevent injury, always use eye, face, respiration, hearing and body protection while operating or in areas where abrasive power tools are being operated.  • Be sure that any loose clothing, hair and all jewelry is properly restrained.  • Keep hand and clothing away from working end of the power tool.  • Always work with firm footing, posture and proper lighting.   • Do not apply excessive force on a tool or apply “rough” treatment to the tool.  • Operate power tools with attention to the consistency of the work environment and the tool itself.  • Follow safety procedures posted in work area.  • Make sure that the work area is uncluttered, and visitors are at a safe range from the tools and debris.  • Use a vise or clamping device to hold work piece firmly in place.  • Electric Machines – Make sure proper electrical codes are followed, including safe wiring and proper grounding.   Accessories and Abrasives  • Tool RPM must never exceed accessory RPM rating. Check accessory manufacturer for details on maximum operating speed or special mounting instructions.  • Always disconnect power before changing accessories or making machine adjustments and repairs.  • The aluminum Dynaswivel ® air line connector or similar accessories must never be used on percussion tools such as chippers and rammers.  • Do not use damaged, bent or severely worn accessories.  • When using any tool with an abrasive product, follow all safety guidelines of abrasive manufacturers.   Safe Operating Practices for Grinders and Sanders  • Every person involved in operating, repairing and/or supervising grinding machines or wheels should be familiar with the contents of ANSI B7.1.   • Never mount non-reinforced grinding wheels on any Dynabrade tool.  • If the speed is higher than the RPM marked on the tool, the tool must be serviced to correct the cause of the over speed condition before use.  • Always use required wheel guards.  Never remove a wheel guard that has been specified for the machine.  Damaged, bent and severely worn guards must be replaced.  • Improper mounting of grinding wheels is one major cause of grinding wheel failure. Each type of grinding wheel requires a different mounting method, spindle diameter and flange dimension.  • In every case, the Safety Code (ANSI B7.1) should be consulted for proper handling, storage, inspection and mounting information.  • All grinding wheels and mounting accessories should be closely inspected before installation and use.  • Protect accessories from exposure to water, solvents, high humidity, freezing temperatures and extreme temperature changes. Store accessories in protective racks or compartments to prevent damage.  • When using a new grinding wheel, or one that has been out of service for an extended period of time, the operator should start the machine under a steel workbench with proper wheel guard in place. It should be run for at least one minute. If the wheel is defective or improperly mounted, this is the time it will usually fail.  • Proper machine maintenance procedures are one of the most important aspects of safety in the use of abrasive wheels. Particular attention should be placed to those components or parts which can effect the speed (RPM) of a tool, such as governors on air grinders.   Machine Specifications  Machine specifications are believed to be accurate at time of printing. However, due to design changes, exact specifications of current tools may vary from the listed data. It is our policy to test and measure our tools in a ready-to-use condition and to state the test results in industry-accepted terms. Dynabrade measures typical production tools using the recommended air hose size, 90 PSIG air line pressure measured at tool inlet, and all muffling and speed control mechanisms. Compromises to these real-use operating conditions can artificially enhance performance measurements.   For tool specifications listed in this catalog:  • HOSE SIZE denotes the recommended inside diameter of the air hose that should be used with the tool for maximum peformance.  • WEIGHT includes all the parts required to run the tool except the airline, abrasive, or attachment.  • RPM is measured under no-load conditions.  • HORSEPOWER is an averaged maximum rating of production tools under ready-to-use conditions.  • Maximum air flow is measured in STANDARD CUBIC FEET PER MINUTE (SCFM) and is an averaged maximum rating, recorded at free speed on non-governed tools or at maximum horsepower on governed tools. Dynabrade adheres to this standard of measurement. It is usually sufficient to directly compare the SCFM of the tool with the compressor’s inlet CFM rating to determine how many tools a particular compressor will run. Depending upon the duty cycle of the tools, a compressor with a storage tank may allow it to run tools with a larger consumption than it’s output.  • SOUND LEVEL is the sound pressure measurement according to the method outlined in ISO regulation ISO-15144.   Safety Comes First Maximizing Value Through Proper Use and Care     226   PRODUCT & SAFETY INFORMATIONPRODUCT & SAFETY INFORMATION  Safety Guidelines For Various Abrasive Tools   Mounting Features Air Tool Type  Guard Requirements   Diagram   Proper Mounting ProcedureAbrasve Size  Backup Flange Blotters Front Flange  Additional Hardware   All   1/3 of wheel diameter, may be smaller to just fit within wheel recess. Requires Special Boss Diameter to extend within Wheel bore   180° operator protection Extend beyond Wheel Face Lip Feature required 180° operator protection Extend beyond Wheel Face Lip Feature required 180° operator protection Extend beyond Wheel Face Lip Feature required   Matching Diameters as Backup Flange   Retaining Nut Required Matching Diameters as Backup Flange  Driving Flange, Requires a Special Adapter Up to 4"   Driving flange, Relieved Flange face, 1/3 Wheel Diameter minimum   Required on Both Sides of Wheel Required Between Flange and Abrasive  Recommended  Driving flange, Relieved Flange face, 1/4 Wheel Diameter minimum — — — — —   —  —   Adapter on rear side of wheel which extends beyond raised hub of wheel — ——  Up to 4"   Wheel Ø Min Flange Ø Min thickness 1 5/8 1/8 2 1 1/8 3 1 3/16 4 1-3/8 3/16 5 1-3/4 1/4 6 2 3/8                 All   Type 27 Depressed Center Wheel Grinders   Alternate Flanging for wheels less than or equal to Ø5" with Ø5/8" or Ø7/8" Centerbores   1/3 of wheel diameter, may be smaller to just fit within wheel recess. Requires Special Boss Diameter to extend within Wheel bore   180° operator protection Extend beyond Wheel Face Lip Feature required  Driving Flange, Matching diameter to Front Flange  ——   Type 1 Wheel Grinders Type 1 Cut-Off Wheel Tools Cone or Plug Grinders Die Grinders   NOTE: Intended for general reference use only. Always refer to ANSI B7.1, B186.1 and EN 792 for detailed requirements.   Cone or Plug Spindle is shorter than hole providing proper clearance. Driving Flange with Flat Bearing Surface   Collet Body Collet Cap  Collet Insert   Safety Guard Driving Flange  Driving Flange Outer Flange   Outer Flange  Outer Flange Spindle Adapter Spindle Adapter   Spindle Nut  Blotter  Blotter  Reinforced Type 1 Wheel  Reinforced Type 27 Wheel   Safety Guard Driving Flange Driving Flange Outer Flange   Blotter Blotter   Blotter   Reinforced Type 27 Wheel   Spindle  Spindle   Safety Guard Safety Guard Adpater  Spindle   Reinforced Cut-Off Wheel   Excessive Overhang reduces bit MOS Refer to Standards   Shaft should be inserted 1" minimum. Bits less than 2" should be inserted at least 1/2 the bit length.     227   PRODUCT & SAFETY INFORMATIONPRODUCT & SAFETY INFORMATION   Air Compressor and Receiver  Refrigerated Air Dryer Air Compressor and Receiver  To Tool Station  Closed Loop Pipe System (Sloped in the Direction of Air Flow) Filter Regulator Lubricator   Ball  Valve  Ball  Valve Drain Valve  Air Flow   Air Flow Drain Valve  Air Hose Coupler Air Tool  90 PSIG (6.2 Bar)   Filter Regulator Lubricator   Recommended Air System Pneumatic Power Tools Have Several Advantages over Electric Power Tools   A sufficient supply of compressed air is necessary The air system must be able to deliver an adequate volume of air and maintain the rated operating pressure at the inlet of the tool.  The supply of air must be free of contamination The types of contamination that need to be eliminated are water (condensation produced by the temperature change while compressing the air), rust scale (rust particles produced inside iron pipes), and atmospheric dust, (dust that is pulled into the compressor from the work environment). Also, it is important to keep dust and debris from entering the air motor when the tool is disconnected from the air supply hose. Always keep the tool air inlet, hose ends, plugs and couplers clear of dust.   Lubrication (oil) through the air supply is important Supplying oil to rotary vane air motors reduces friction and wear of the moving parts and provides protection for steel components.  Filter-Regulator-Lubricator is Recommended As an air tool manufacturer, Dynabrade recommends the use of a Filter-Regulator- Lubricator at each tool station. We also encourage the use of correctly sized accessories that will deliver a sufficient  supply of air. Some examples of Dynabrade air tool accessories are Dynaswivel   ® airline connectors, quick disconnect fittings, and in-line blow guns. All of these accessories make for suitable additions to any compressed air system.   Pneumatic Power Tools Have Several Advantages over Electric Power Tools One of the major advantages is durability, however, to make full use of that advantage some important steps must be followed. LUBRICATOR SETTING 1 DROP PER MINUTE 20 SCFM (566 LPM)  LUBRICATOR SETTING     228   PRODUCT & SAFETY INFORMATIONPRODUCT & SAFETY INFORMATION  Selecting a Compressor Guidelines for Matching Proper Compressor to Workplace   A) Compressor Type Base on your PSIG (Bar) needs  0 to 80 PSIG (5.5 Bar)– You may only need a single stage compressor. 80 to 250 PSIG (17.2 Bar)– You will need a two-stage compressor. Two-stage compressors are recommended when tool use is continuous. Note: Dynabrade air tools require operating air pressure of 90 PSIG (6.2 Bar).   B) Air Consumption  Determine the total demand SCFM (LPM). List the requirements for all equipment, tools and other air consumption variables (both continuous and intermittent air usage demands).   C) Compressor Horsepower (hp)  Use the determined total demand SCFM (LPM) and add approximately 20% for system variables. Add ______% for (your) future growth. If the above total equals less than 100 SCFM(2,832 LPM) divide this total by 4 to find the compressor hp. If the total is over 100 SCFM(2,832 LPM) divide by 5 to find the compressor hp.   Example: System requirements = 165 SCFM (4,673 LPM) @ 100 PSIG (6.9 Bar) 165 ÷ 5 = 33 hp Resulting in a suggested compressor size: 30 hp to 40 hp compressor  D) Tank Size  As a general rule, the larger the tank, the better the system. Use a larger tank for installations where large flows of short duration are needed.    Example: For a 5 hp compressor use a 60 Gal. (227 L), 80 Gal. (303 L) or 120 Gal. (454 L) storage tank.   E) Controls   Stop-Start – The motor stops when the compressor unloads and starts again when the pressure in the receiver drops. Use a stop-start pressure switch control for a small system. (Compressors up to 15 hp.)   Continuous Run – Equipped with constant pressure control, loading and unloading as the supply of compressed air in the receiver drops or reaches a maximum.     229   PRODUCT & SAFETY INFORMATIONPRODUCT & SAFETY INFORMATION  Maintaining Adequate Air Flow Prevent and Eliminate Air Supply Restrictions   Air Motor SCFM Hose & Fitting Recommended Length  (Standard Cubic Feet per Minute) I.D. Required Air Supply Hose  22 SCFM (623 LPM) 1/4" (8 mm) 1' - 8'  (0.3048 m – 2.44 m) 28 SCFM (793 LPM) 3/8" (10 mm) 1' - 25'  (0.3048 m – 7.6 m) 35 SCFM (991 LPM) 3/8" (10 mm) 1' - 20'  (0.3048 m – 6.10 m) 45 SCFM (1,274 LPM) 3/8" (10 mm) 1' - 10'  (0.3048 m – 3.042 m) 73 SCFM (2,067 LPM) 1/2" (15 mm) 1' - 20'  (0.3048 m – 6.10 m)   Common Causes of Restriction  • The air supply hose is too long.  • The inside diameter (i.d.) of the hose is too small.  • The air connections or fittings have inside diameters that are too small.  • There are too many air connections or fittings being used.  • If an inline filter is being used, the unit may be too small or the filter element may be plugged.  • If an inline regulator is being used, the unit may be to small, not adjusted properly or defective.  • The air supply hose, air fitting, air tool inlet or air tool exhaust may be plugged.  • If the air tool has a speed regulator, it may be closed.   Air Hose Supply  • Use the air supply hose with the correct inside diameter as is recommended by the air tool manufacturer.  • Use the shortest air supply hose possible for the task being performed.  • Longer air supply hoses require larger inside diameters.  • Coiled air supply hoses appear much shorter than they actually are. When using a coiled hose, make sure that the inside diameter is large enough to compensate for the length (see chart below).   Air Supply Hose Recommended Chart  • Choose the correct Inside Diameter (I.D.) and Length of Air Supply Hose. NOTE:To increase the length of air supply hose it will be necessary to increase the inside diameter of the hose.   Flexible Air Supply Hoses (Available from Dynabrade)  • 3/8" I.D. with two male 1/4" NPT fittings. Part No. 11292 - 8 feet (2.44 m) long  • 1/2" I.D. with one male and one female 1/2" NPT fitting.  Part No. 95870 - 5 feet (1.53 m) long   Air Supply Connectors/Accessories  • Compare airflow SCFM (LPM)   NPT  (National Pipe Thread)  is the thread size. (i.e. 1/4" NPT)   How to Measure a Typical Plug   NOTE:All information is based on the size of the Inside Diameter @ 90 PSIG (6.2 Bar) in conjunction with the mating coupler.  Common Plug Connector 25 SCFM (708 LPM) .2010 in. (5.11 mm) I.D.   Dynabrade Plug Connector 76 SCFM (2,152 LPM) .3070 in. (7.80 mm) I.D.   Inside Diameter   Thread Size     230  Ergonomics  Ergonomics helps adapt the job to the person, rather than forcing the person to fit the job. Adapting the job to fit the worker can help reduce ergonomic stress and eliminate many potential ergonomic disorders. The objective of ergonomics is to adapt the job and workplace to the worker by designing tasks, work stations, tools and equipment that are within the worker's physical capabilities and limitations. Major causes of many current ergonomic problems are technological advances such as more specialized tasks, higher assembly line speeds, and increased repetition, plus a lack of ergonomically designed technologies. Consequently,   worker's hands, wrists, arms, shoulders, backs and legs may be subjected to thousands of repetitive twisting, forceful or flexing motions during a typical workday. In many instances, some machine tools and work environment are often poorly designed, placing undue stress on the worker's tendons, muscles and nerves. Recognizing ergonomic hazards in the workplace is the essential first step in correcting the hazards and improving worker protection. The proper Dynabrade tool and work environment can help reduce the contributing factors associated with cumulative trauma disorders. Ergonomics and operator comfort have worked their way into each Dynabrade air tool design. Factors including, vacuum, vibration, insulation and noise (VVIN) are addressed at every integral design stage. VVIN is now critical to our research and development of new products as we continue to meet the challenging needs of the market place.   Vacuum  Airborne sanding particles can cause severe inflammation of the eyes and lung tissue, varying on the degree of exposure and the type of airborne contaminants involved. It is because of this danger that Dynabrade manufactures self-generated and central vacuum tools that direct airborne sanding particles away from the operator and the air motor, reducing contamination and the cause of risk to the operator.   Vibration  All hand-held machines transmit vibration to an operator's hand while in operation. Operators that work with vibrating machines for extended periods of time risk many types of injury. The most common are vascular injury, nerve injury, skeletal injury and joint injury. To help reduce vibration, we have built-in features such as composite housings and rubber overmolds, plus superiorly balanced motors and shafts. In addition, Dynabrade premium Sanding Pads are manufactured with unique one-piece hub assembly, ensuring lower vibration levels.   Insulation  Cold caused by pneumatic powered tools can cause a variety of work related injuries. Dynabrade manufacturers a variety of tools with thermal- insulated housings that help prevent cold temperature transmission to the operator, reducing the risk of white finger disease and other related injuries.   Noise  High sound levels over an extended period of time can damage hearing. New enhancements to muffling systems, exhaust overhose protection and other tool design factors further reduce tool sound levels in the workplace.   Dynabrade Tools Meet the Following High Quality Standards   Healthy Work Environment The Term “Ergonomics” can Simply be Defined as the Study of Work  PRODUCT & SAFETY INFORMATIONPRODUCT & SAFETY INFORMATION   Properly Designed Tool  An example of how a properly designed tool assists in reducing work injuries is Dynabrade’s 7° Offset, Gearless Front Exhaust Die Grinder:  • Lightweight composite housing with anti-slip ring reduces cold air transmission to operator’s hand.  • Handle is offset 7° for greater operator comfort and control.  • Gearless design reduces vibration.  • Smaller collet design reduces excessive run-out and reduces vibration.  • Low profile for greater operator control to work in hard to reach areas.   Unique Vacuum Design  Anti-clog design enhances vacuum pick-up and directs dust away from the air motor. Ask about our self- contained dust collection systems and vacuum shrouds.   Less Vibration  Composite base and integrated rubber over-mold create a non-slip feel and insulate from cold air.   Insulated Handle  Helps insulate from cold air... now standard on most tools.   Low Sound Levels  Rear exhaust muffler standard on many models.   Optional Overhose Assembly  May be used to further reduce noise levels by as much as 5 dB(A). Overhose redirects exhaust away from operator and workpiece.     231   NUMERICAL INDEX OF TOOLSNUMERICAL INDEX OF TOOLS   Model Page Number Number  Model Page Number Number  Model Page Number Number  Model Page Number Number  Model Page Number Number   11475 22 11476 22 11477 22 11486 23 12200 135 12201 135 12202 135 12204 136 12205 136 12206 136 12207 136 12250 137 13100 34 13101 34 13102 34 13120 35 13121 35 13200 29 13201 30 13202 30 13204 30 13205 30 13206 32 13207 32 13214 32 13215 33 13220 30 13280 43 13300 37 13301 37 13310 37 13320 43 13340 36 13400 38 13401 38 13410 38 13411 38 13415 39 13450 38 13460 38 13500 29 13501 29 13502 30 13503 30 13505 31 13506 31 13507 32 13508 32 13509 34 13511 29 13512 31 13515 31 13516 31 13517 32 13518 32 13519 34   13520 32 13521 29 13523 32 13525 33 13531 29 13535 33 14000 8 14010 8 14200 25 14300 26 14303 26 14306 26 15003 16 15006 16 15300 18 15302 18 15400 19 15401 19 15420 19 30200 138 30303 138 30304 138 30336 138 30337 138 31600 138 40320 11 40321 11 40324 11 40326 11 40330 13 40335 11 40352 12 40353 12 40381 11 40590 13 40591 13 50000 99 50001 99 50002 99 50003 99 50004 99 50005 99 50302 121 50303 123 50304 117 50306 122 50307 117 50308 122 50320 116 50321 116 50324 114 50340 122 50345 117 50346 122 50347 118 50348 124   50349 118 50350 124 50360 117 51130 35 51134 35 51200 89 51200 96 51201 89 51201 96 51202 89 51202 96 51203 89 51203 96 51204 89 51204 96 51205 89 51205 96 51211 100 51212 100 51214 100 51215 100 51300 101 51301 35 51301 101 51302 101 51303 101 51304 101 51305 101 51306 101 51307 101 51310 101 51311 101 51312 101 51313 101 51314 101 51315 101 51316 101 51317 101 51330 137 51331 137 51350 72 51370 114 51371 115 51390 88 51391 88 51392 88 51393 88 51394 88 51395 88 51396 88 51397 88 51400 86 51401 86 51405 86 51410 55 51411 55   51412 55 51415 55 51430 87 51446 90 51447 90 51448 90 51449 90 51450 87 51451 87 51454 87 51455 87 51458 88 51459 88 51470 88 51472 88 51474 78 51476 78 51479 78 51600 88 51601 88 51610 89 51612 59 51613 59 51614 90 51700 93 51701 93 51702 93 51703 93 51704 93 51705 93 51706 93 51707 93 51708 93 51730 93 51731 93 51732 93 51733 93 51740 93 51742 93 51750 93 51753 93 51756 93 51800 99 51801 99 51802 99 51803 99 51804 99 51805 99 51810 93 51811 93 51812 93 51813 93 51820 111 51821 111 51822 111 51846 132   51847 132 51848 132 52050 41 52051 41 52052 41 52060 40 52061 40 52062 40 52100 89 52100 105 52101 89 52101 105 52102 89 52102 105 52103 89 52103 105 52104 89 52104 105 52105 89 52105 105 52196 95 52200 97 52201 96 52202 97 52203 96 52204 100 52205 100 52206 100 52207 100 52211 103 52212 103 52213 103 52216 104 52218 104 52221 103 52222 103 52223 103 52225 106 52226 106 52230 97 52231 96 52232 97 52233 96 52242 106 52250 100 52251 100 52252 100 52256 105 52257 105 52258 105 52261 103 52262 103 52263 103 52264 105 52265 105 52267 104   Model Page Number Number  52276 105 52277 105 52278 105 52280 104 52281 105 52282 105 52283 105 52286 106 52289 106 52290 106 52293 106 52294 106 52295 106 52297 106 52298 106 52315 99 52316 99 52317 99 52318 99 52319 99 52320 99 52325 97 52326 97 52327 97 52328 97 52331 100 52333 100 52335 100 52337 100 52341 97 52345 97 52373 125 52374 125 52376 125 52377 125 52378 125 52379 125 52380 125 52400 111 52402 111 52405 111 52410 113 52412 113 52413 113 52415 113 52420 127 52430 128 52431 128 52434 127 52435 127 52436 129 52438 129 52439 127 52450 118 52451 118 52452 124     232   NUMERICAL INDEX OF TOOLSNUMERICAL INDEX OF TOOLS   Model Page Number Number  Model Page Number Number  Model Page Number Number  Model Page Number Number  Model Page Number Number   52453 124 52454 118 52455 124 52500 111 52503 111 52515 115 52516 115 52518 115 52520 111 52521 111 52522 111 52530 113 52531 113 52532 113 52536 129 52538 129 52540 111 52541 111 52542 111 52557 113 52558 113 52560 114 52561 116 52562 116 52563 118 52564 116 52565 116 52566 116 52567 118 52573 128 52574 128 52576 127 52577 127 52578 127 52579 128 52580 128 52590 111 52620 123 52625 123 52660 107 52662 107 52663 107 52665 107 52666 107 52667 107 52668 107 52669 107 52672 108 52673 108 52675 108 52676 108 52677 108 52678 108 52679 108 52680 107 52682 107   52683 107 52685 107 52686 107 52687 107 52688 107 52689 107 52692 108 52693 108 52695 108 52696 108 52697 108 52698 108 52699 108 52700 120 52705 121 52706 121 52710 120 52711 120 52712 120 52715 126 52716 126 52717 126 52718 126 52719 126 52720 126 52721 126 52722 126 52861 92 52862 92 52863 92 52864 92 52900 27 53037 132 53046 132 53047 132 53048 132 53060 133 53072 132 53073 132 53074 132 53077 132 53078 132 53079 132 53080 134 53081 134 53090 134 53091 133 53095 133 53096 133 53143 134 53200 133 53210 133 53400 56 53401 56 53402 56 53403 56   53403 85 53410 111 53415 57 53417 57 53420 95 53425 99 53430 131 53435 131 53440 85 53455 131 53460 86 53465 57 53465 86 53501 35 53501 102 53502 102 53506 102 53507 102 53510 102 53511 102 53512 102 53513 102 53521 109 53522 109 53523 109 53531 109 53532 109 53533 109 53533 109 56800 51 56803 51 56804 51 56815 51 56818 51 56819 51 56826 51 56829 51 56830 51 56840 51 56843 51 56844 51 56850 51 56853 51 56854 51 56859 51 56862 51 56863 51 57101 53 57126 82 57127 120 57400 73 57401 73 57404 73 57405 73 57407 73 57500 54   57501 54 57502 54 57503 54 57504 54 57550 84 57553 84 57570 76 57571 77 57572 76 57573 77 57574 76 57575 77 57582 76 57583 77 57584 76 57585 77 57810 69 57811 69 57814 69 57900 64 57902 79 57905 66 57906 66 57908 80 57909 80 57910 64 57920 67 57922 67 57923 67 57924 67 57925 67 57926 67 57927 67 57928 68 57929 68 57930 64 57956 66 58000 65 58010 65 58034 74 58035 74 58037 74 58038 74 58039 74 58040 63 58041 63 58050 37 58052 49 58053 49 58054 49 58070 68 58075 68 58400 52 58401 52 58405 52 58406 52   58409 52 58410 52 58411 52 58412 49 58414 52 58415 52 58416 52 58418 52 58419 52 58420 52 58430 62 58431 62 58435 62 58436 62 58441 62 58442 62 58443 62 58444 62 58445 62 58446 62 58455 82 58460 61 58461 62 58465 62 58466 62 58480 53 58485 53 58500 70 58501 71 58502 71 58503 70 58504 71 58505 71 58506 71 58507 70 58508 72 58509 70 59000 47 59003 47 59003 47 59004 47 59005 47 59008 47 59009 47 59010 47 59013 47 59014 47 59015 47 59018 47 59019 47 59020 47 59023 47 59024 47 59025 47 59028 47 59029 47   Model Page Number Number  59030 47 59033 47 59034 47 59035 47 59038 47 59039 47 59040 47 59043 47 59044 47 59100 47 59103 47 59104 47 59105 47 59108 47 59109 47 59110 47 59113 47 59114 47 59115 48 59116 48 59117 48 59118 48 59119 49 59306 58 59307 58 59308 58 59309 58 64100 148 64500 147 64860 141 64861 141 64862 141 64863 141 64881 140 64900 140 64901 140 64902 140 64903 140 64904 140 64905 140 64991 146 64993 146 65014 146 65016 146 65750 146 65751 146 65752 146 65753 146 66402 145     R Red   ed   DynaZip Air Tool...................................... 234 Auto File II............................................ 235 Disc Sanders ........................................ 235 Die Grinders .......................................... 236   The name Dynabrade Red identifies a separate line of tools targeted at the value-minded professional. These portable air tools are designed for workplaces with non high-production applications. As such, Dynabrade Red tools carry the following six-month warranty:   Following the reasonable assumption that any inherent defect which might prevail in a product will become apparent to the user  within 6 months from the date of purchase, “Dynabrade Red” tools are warranted against defects in workmanship and materials under normal use and service.  We shall, at our option, repair or replace at our factory, any “Dynabrade Red” tool which shall, within 6 mon ths after delivery to the original purchaser, indicate upon our examination to have been defective.  Our obligation is contingent upon pr oper use of “Dynabrade Red” tools in accordance with factory recommendations, instructions and safety practices.  The warranty shall not  apply in these cases:  Normally wearable parts such as bearings, rotor blades, etc.  Consumables such as sanding pads, etc.  Misuse,  neglect in maintaining tool or tool modification.  Lack of lubrication or evidence of rust, dirt or corrosion.  Tools requiring normal  tune-up or cleaning.  Tools being used after they are badly worn such as using ratchet with worn yoke.  Ratchet anvils damaged by excessive hand torquing.  Use in production-type applications.  Products, to be considered for warranty, must be sent back to our factory, transportation prepaid by user.  Please send tool back to attention “Repair Department” with note fully explaining the nature of the problem a long with a copy of original invoice indicating model and serial number.  Return product to: Dynabrade, Inc., Attn. Repair Department, 8989 Sheridan Drive, Clarence, NY 14031-1490.   Cut-Off Wheel Tools.................................. 237 Impact Wrench ...................................... 237 Buffers ................................................ 238     234   Portable Air Tools for the Value-Minded Professional   DYNABRADE RED   Model 18258  DynaZip Eraser Tool  • Tool with wheel guard and handle. Also includes 92255 Eraser Wheel (4" dia. x 1-3/16" wide) and 92284 Hub Assembly. (Hub Assembly includes bolt, hub shield, hub cushion and drive plates for mounting either Wire Wheel or Eraser Wheel.)  • Excellent for removing two-sided adhesive molding tape and decal material.  • Eraser Wheel has serrations for improved cooling effect air flow . Also resists heat buildup and reduces “jumping” and vibration.   DYNABRADE RED   WIRE WHEELS  & ERASER WHEELS   4" dia. (102 mm)   Zip Wheels, Eraser Wheels, Hub Assemblies: Page 185  • Accessories: Page 159   DynaZip Air Tool Surface Preparation Tool, 4" Diameter    Model Motor Motor Sound Maximum Air Flow Hose I.D. Size Air Inlet Spindle Weight Length Height Number hp (W) RPM Level SCFM (LPM) Inch (mm) Thread Thread Pound (kg) Inch (mm) Inch (mm)  18255 .4 (298) 3,200 87 dB(A) 28 (793) 3/8 (10) 1/4" NPT 1/4"-20 Male 2.5 (1.1) 12 (305) 5-1/2 (140) 18258 .4 (298) 3,200 87 dB(A) 28 (793) 3/8 (10) 1/4" NPT 1/4"-20 Male 2.5 (1.1) 12 (305) 5-1/2 (140) Additional Specifications: Air Pressure 90 PSIG (6.2 Bar)   Model 18255 Model 18258   • Excellent power for effectively removing seam sealer and paint.  • DynaZip tool outperforms conventional spiral-wound wheels without clogging.  • Tool duplicates sand-blasting effect without surface fatigue.  Model 18255  DynaZip Tool with Wire Wheel  • Tool with wheel guard and handle. Also includes 92245 Wire Wheel (4" dia. x 3/4" wide) and 92284 Hub Assembly. (Hub Assembly includes bolt, hub shield, hub cushion and drive plates for mounting either Wire Wheel or Eraser Wheel.)  Model 18253  DynaZip Tool Only  • Tool with wheel guard and handle only; no accessories.   Model 18256  DynaZip Versatility Kit  • 18255 DynaZip Tool  • 92244 Coarse Wire Wheel (1/2" wire bristle width x 3/4" wide band)  • 92245 Coarse Wire Wheel (3/4" wire bristle width x 3/4" wide band)  • 92255 Eraser Wheel  • 92284 Wheel Hub Assembly   Model 18256     235   Portable Air Tools for the Value-Minded Professional   DYNABRADE REDDYNABRADE RED   ABRASIVE BELTS   1/2" - 3/4" wide x 18",  20-1/2" long  (13 mm - 19 mm  x 457 mm, 521 mm)   Contact Arms: Page 14   •  Abrasives: Page 208  •  Accessories: Page 159   Auto FileII Multi-Purpose Abrasive Belt Tool    Portable Air Tools for the Value-Minded Professional   ABRASIVE DISCS   2" and 3" Diameters (51 mm and 76 mm) Disc Sanders 2" and 3" Diameter   Model 18100  Model 18258   Model 18100  For 18" Long Belts  • Excellent multi-purpose tool for grinding sharp metal edges, rusted bolts, welds, etc. Effective for blending, scuffing grooves and contours.  • Tool includes 11206 Contact Arm for coated abrasive and  non-woven nylon belts, 3/4" wide by 18" long.  • Will also run belts 1/2" wide by 18" long. (See page 14 for full array of compatible Contact Arms.)  Model 18101  For 20-1/2" Long Belts  • Tool includes 11287 Contact Arm for coated abrasive and  non-woven nylon belts, 5/8" or 3/4" wide by 20-1/2" long.   Model 18160   • 7° offset handle for added comfort and control. Tool includes safety-lock lever. Gearless design; front exhaust.  • Composite tool grip absorbs vibration and reduces cold air transmission to the operator.  Model 18160  For 2" Diameter Abrasive Discs  • Includes locking-type disc pad, 2" diameter.  Model 18180  For 3" Diameter Abrasive Discs  • Includes locking-type disc pad, 3" diameter.   Four-In-One Versatility Kit: Belt Tool • Die Grinder • Cut-Off Tool • Disc Sander  • Each kit includes these convenient, quick-change accessories: 50010 Collet (1/4"), 50292 Cut-Off Guard, 50269 Flange, 51347 Locking-Type Pad (3" dia., 3/8"-24), 40014 Belt Housing Assembly, 94300 Dynaswivel® (see page 163), Abrasive Belt, Abrasive Disc, Wrenches, all in deluxe carrying case.  Model 18025  For 18" Long Belts  • 18100 basic tool, with 11206 Contact Arm for coated abrasive  and non-woven nylon belts, 3/4" wide by 18" long.  Model 18026  For 20-1/2" Long Belts  • 18101 basic tool, with 11287 Contact Arm for coated abrasive  and non-woven nylon belts, 5/8" or 3/4" wide by 20-1/2" long.   Model Motor Motor Sound Maximum Air Flow Hose I.D. Size Air Inlet Spindle Weight Length Height Number hp (W) RPM Level SCFM (LPM) Inch (mm) Thread Thread Pound (kg) Inch (mm) Inch (mm)  18100 .5 (373) 20,000 79 dB(A) 22 (623) 3/8 (10) 1/4" NPT – 2.8 (1.3) 15 (381) 5 (127) 18160 .5 (373) 20,000 78 dB(A) 22 (623) 3/8 (10) 1/4" NPT 1/4"-20 Male 1.8 (0.8) 8-1/2 (216) 5-1/2 (140) 18180 .5 (373) 20,000 78 dB(A) 22 (623) 3/8 (10) 1/4" NPT 3/8"-24 Male 1.9 (0.9) 8-1/4 (210) 5-1/4 (133) Additional Specifications: Air Pressure 90 PSIG (6.2 Bar)     236   Portable Air Tools for the Value-Minded Professional   CARBIDE BURRS, ROTARY FILES, MOUNTED POINTS, WHEELS AND DISCS   Carbide Burrs: Page 189  • Abrasives: Page 208  • Accessories: Page 159   Die Grinders Straight Line, Right Angle, 7° Offset   Model 18010   Right Angle Die Grinder  • Compact, lightweight design permits easy access to tight areas.  • Includes safety-lock lever; rear exhaust.  • Composite tool grip absorbs vibration and reduces cold air transmission to operator.  Model 18010  1/4" Collet  • Optional 1/8" collet insert: 18432.   Model 18000   Straight Line Die Grinder  • Compact, lightweight design.  • Includes safety-lock lever; rear exhaust.  • Smooth, efficient air motor with built-in speed regulator.  • Composite tool grip absorbs vibration and reduces cold air transmission.  Model 18000  .4 hp, 1/4" Collet  • Optional 1/8" collet insert: 18432.  Model 18230  .5 hp, 1/4" Collet  • Optional 1/8" collet insert: 18432.   Model 18015  Die Grinder / Disc Sander Kit  • Kit offers two tools in one! Comes complete with accessories  for easy conversion to Die Grinder or Disc Sander.   • Ideal for surface preparation, scuffing, deburring, etc.   • Includes 18010 Die Grinder (see above), Locking-type backup  pad (3" diameter), 1/4"-20 shank, 94300 Dynaswivel ® (see  page 163), assortment of 3" diameter abrasive discs (coated  and non-woven nylon), all in durable carrying case.   Model 18011  6 mm Collet  • Optional 6 mm collet insert: 18431.   Model 18020   Model 18020  7° Offset Die Grinder  • 7° offset handle offers added comfort and control.  • Gearless design for reduced downtime and maintenance.  • Includes 1/4" collet. Front exhaust.  • Composite tool grip absorbs vibration and reduces cold air transmission to operator.   Model 18001  .4 hp, 6 mm Collet  • Optional 6 mm collet insert: 18431.   Model 18015   Model Motor Motor Sound Maximum Air Flow Hose I.D. Size Air Inlet Spindle Weight Length Height Number hp (W) RPM Level SCFM (LPM) Inch (mm) Thread Thread Pound (kg) Inch (mm) Inch (mm)  18000 .4 (298) 25,000 87 dB(A) 28 (793) 3/8 (10) 1/4" NPT – 1 (.45) 6-1/2 (165) 1-3/4 (44) 18010 4 (298) 20,000 87 dB(A) 19 (538) 3/8 (10) 1/4" NPT – 1.3 (.59) 6-1/2 (165) 3 (76) 18020 .5 (373) 20,000 78 dB(A) 22 (623) 3/8 (10) 1/4" NPT – 1.9 (0.9) 8 (203) 5-3/4 (146) 18230 .5 (373) 20,000 91 dB(A) 28 (793) 3/8 (10) 1/4" NPT – 1 (.45) 6-1/2 (165) 1-3/4 (44) Additional Specifications: Air Pressure 90 PSIG (6.2 Bar)   DYNABRADE REDDYNABRADE RED     237   Portable Air Tools for the Value-Minded Professional   CUT-OFF WHEELS  3" dia. (76 mm) with 3/8" (10 mm) center hole   Cut-Off Wheels: Page 222  • Accessories: Page 159   Cut-Off Wheel Tools 7° Offset and Long Neck   Model 18075 Model 18075  Long Neck Cut-Off Wheel Tool  • Accepts optional Cut-Off Wheels, 3" in diameter with  3/8" center hole.  • Extension design offers easy access to tight or confined areas. Design also allows for easier straight-type cuts. Also offers improved visibility of work piece.  • Rear exhaust; 20,000 RPM.   • Composite tool grip absorbs vibration and reduces cold air transmission to operator.  • Important: Speed of tool must not exceed maximum operating speed of accessory. Always use proper guards, wear eye gear and body protection.   Model 18080  Model 18080  7° Offset Cut-Off Wheel Tool  • Accepts optional Cut-Off Wheels, 3" in diameter with  3/8" center hole.  • 7° offset handle provides maximum comfort and control.  • Gearless design for reduced downtime and maintenance.  • Front exhaust keeps work surface clear. 20,000 RPM.   • Composite tool grip absorbs vibration and reduces cold air transmission to operator.  • Important: Speed of tool must not exceed maximum operating speed of accessory. Always use proper guards, wear eye gear and body protection.   Model Motor Motor Sound Maximum Air Flow Hose I.D. Size Air Inlet Spindle Weight Length Height Number hp (W) RPM Level SCFM (LPM) Inch (mm) Thread Thread Pound (kg) Inch (mm) Inch (mm)  18063 - 7,000 89 dB(A) 28 (793) 3/8 (10) 1/4" NPT – 6 (2.7) 7-3/4 (197) 7-3/4 (197) 18075 .5 (373) 20,000 87 dB(A) 28 (793) 3/8 (10) 1/4" NPT – 2 (0.9) 12 (305) 3-1/2 (89) 18080 .5 (373) 20,000 85 dB(A) 22 (623) 3/8 (10) 1/4" NPT – 2.2 (1) 8-3/4 (222) 5 (127) Additional Specifications: Air Pressure 90 PSIG (6.2 Bar)   Portable Air Tools for the Value-Minded Professional  Impact Wrench Pin Retainer Design for Single Socket Use   Model 18063  Impact Wrench, 1/2" Drive  • For efficient loosening and tightening of bolts, lug nuts, etc. Pistol grip with easy on/off trigger.  • Tool's pin retainer design offers optimum long-term use  of single socket.  • Ideal for industrial operators employing one socket per wrench.  • Adjustable torque settings (torque: 600 ft./lbs.). • 7,000 RPM; rear exhaust.   Wheel Sold  Separately  Wheel Sold Separately   DYNABRADE REDDYNABRADE RED   Model 18063   Model 18075     238   Portable Air Tools for the Value-Minded Professional   Model 18058  Buffer / Spot Repair Kit  • Excellent kit for spot repair and buffing/polishing. Angle-head tool permits access to difficult areas. Kit includes:  • 18055 2,300 RPM tool  • 50122 3" Hook-Face Backing Pad (3/8"-24)  • 90027 3" Terry Cloth Bonnet  • 90028 3" Synthetic Wool Pad  • 90034 3" Natural Wool Pad  • 90038 3" White Polishing Foam Pad  • 90044 3" Yellow Cutting Foam Pad  • 95723 4 oz. Finesse Creme  • 95727 4 oz. Dynabrade Glaze  • 54034 Random Orbit Sanding Head  • 54018 1-1/4" Sanding Pad  • 93191 Sample 9-Micron 1-1/4" Abrasive Discs  • 94300 Dynaswivel®  • Wrenches for Accessory  Changes  • Deluxe Storage/Carry Case   POLISHING BUFFS   3" (76 mm) diameter   Polishing Buffs: Page 179  • Accessories: Page 159   Buffer 3" Diameter   Model Motor Motor Sound Maximum Air Flow Hose I.D. Size Air Inlet Spindle Weight Length Height Number hp (W) RPM Level SCFM (LPM) Inch (mm) Thread Thread Pound (kg) Inch (mm) Inch (mm)  18055 .4 (298) 2,300 87 dB(A) 28 (793) 3/8 (10) 1/4" NPT 3/8"-24 Male 2 (0.9) 10-3/8 (263) 2-1/2 (63) 18056 .4 (298) 3,200 87 dB(A) 28 (793) 3/8 (10) 1/4" NPT 3/8"-24 Male 2 (0.9) 10-3/8 (263) 2-1/2 (63) Additional Specifications: Air Pressure 90 PSIG (6.2 Bar)   Model 18255 Right Angle Buffer, 3" Diameter  • Tool includes 50126 Hook-Face Backup Pad (3" dia.) and 90034 Wool Buff (3-1/2" dia.).  • Ideal for buffing and polishing in small areas.  • Built-in speed control.  • 3/8"-24 male spindle. Safety-lock lever. Rear exhaust.  Model 18055  2,300 RPM  Model 18056  3,200 RPM   Model 18258   DYNABRADE REDDYNABRADE RED   Model 18255     Dynabrade’s Mobile Training Unit  Is Ready to Pull into Your Town! Schedule a Visit to Your Business, Anywhere in the Continental USA   Hold an Exclusive On-Site Demonstration by a Dynabrade Specialist   Call Toll-Free TODAY at 1-800-828-7333   On-Site Demonstrations of the  Complete Dynabrade Line, including:  • Abrasive Belt Tools & Finishing Tools  • Random Orbital Sanders  • Die Grinders & Disc Sanders  • Stationary Machines  • Complete Accessories Offering, including Dynacushion ® & DynaWheel Pneumatic Wheels, Dynaswivel ® Air Line Connector, Much More!   Dynabrade Tools: Pages 7-158  • Accessories: Pages 159-207  • Abrasives: Pages 208-223     ➤ Sections highlighting new products, application solutions and featured items  ➤ Product offerings localized by region and market, updated daily   ➤ Expanded product support, including new demonstration videos  ➤ New easy-to-use interface, available soon in multiple languages   Visit our Website for more Tools and Related Accessories  www.dynabrade.com  ©DYNABRADE, INC., 2007   DYNABRADE, INC.  8989 Sheridan Drive  •  Clarence, New York  14031-1490  •  Phone: (716) 631-0100 Fax: 716-631-2073  •  US Consumers Call Toll Free: 1-800-828-7333  DYNABRADE INTERNATIONAL  8989 Sheridan Drive  •  Clarence, New York  14031-1490  •  Phone: (716) 631-0100 Fax: 716-631-2524  •  Canadian Consumers Call Toll Free: 1-800-344-1488  DYNABRADE EUROPE S.à r.l.  Zone Artisanale  •  L-5485 Wormeldange—Haut, Luxembourg Phone: +352 768 494 1  •  Fax: +352 768 495  DYNABRADE DO BRASIL  Rua Oneda, 632  •  Sao Bernardo do Campo  •  SP - CEP 09895-280 Phone 55-11-4390-0133  •  Fax 55-11-4399-1067   DISTRIBUTED BY:   Try Our U.S. Consumer Toll Free Number 1-888 DYNABRADE  (or 1-800-828-7333 )   Visit: www.dynabrade.com  for an ALL-NEW Website Experience Dynabrade introduces our NEW website, completely redesigned to serve the global marketplace.  Visit our site today – and begin exploring a world of exciting improvements!