The following Flip Catalog has been brought to you courtesy of   Specialtytools.com. Our hopes are to bring you the most   comprehensive information we can so you can make an informed   decision regarding purchases.   Not all of the items in this series of catalogs are stocked; some are   special order and require lead times. We hope that when it comes time   to make a purchase you will offer us an opportunity to quote you on   the items you need.   Please call our office with any questions you may have regarding these   items.   1 800 669 5519     www.everlastsaw.com     Dear Valued Customer, EVERLAST began with the belief that quality and service to its customers was the formula for future success. Founded by Mr. Pat Farengo in 1947, EVERLAST started as a service company specializing in the maintenance of cutting tools used in the woodworking industry. As the introduction and use of Tungsten Carbide Tipped Tools became more widely acceptable in woodworking, EVERLAST began to specialize in TCT Tooling and started to manufacture specialty tooling, router bits, and saw blades. In 1974 EVERLAST turned all of its attention and efforts to producing the highest quality TCT Saw Blades and now carries a product range from 2 inches to 18 inches in diameter in its standard program and 2 inches to 22 inches in diameter in its custom made saw program. Millimeter sizes are also included. Our standard saw line includes saws for such specialty applications as Glue Line, Solid Surface, Mitre, Countertop, and Plastic Cutting. We also offer a line of the highest quality Router Bits, Metric Boring Bits, Face Frame Bits, and Solid Carbide Spiral Compression Bits. All items are backed by the Everlast Guarantee of Quality. Please see our catalogue pages for complete details, and be sure to visit our website at www.EVERLASTSAW.com, for up to the minute product information.  Sincerely Vincent Farengo President     CARBIDE TIPPED ROUTER BITS   CARBIDE BORING BITS   CARBIDE TIPPED CIRCULAR SAW BLADES   Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Safety Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-5  Technical Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-7 Glue Line Rip, Heavy Duty Rip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8  Astra Wood . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8  Combination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9  General Purpose Cut-Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 Standard Purpose Cut-off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 Special Purpose Cut-off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10,11  Double Cut-off & Trim . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11  Plex-Cut . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11  Thin Rim, Thin Kerf . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12  Radial Overarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13  Mitre Saws . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13  Astra Mitre Saws . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13  Double Faced Laminate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 Double Faced Veneer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15  Non-Ferrous Metal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 Steel-Kut . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15  Astra Series Panel Saws . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16  Astra Scoring Saws, Split Scoring Saws . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 Astra Series Panel Saws Sets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17  Countertop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17  Astra Solid Surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17  Dado Sets, Outside Dado Saws, Chippers . . . . . . . . . . . . . . . . . . . . . . . . . .18  Groovers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19 Egde Bander . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19 Biscuit Cutter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19  Custom Saw Blade Quotation Form . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20  Safety Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22-23  Plunge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24 Solid Carbide Compression Spiral, Rabbet, Screw-Type Mortise . . . . . . . .25 Solid Carbide Flush Trim, Bevel, Dado . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26  Slotting Cutters, Tongue & Groove Assembly . . . . . . . . . . . . . . . . . . . . . . . .27  Flush, Templet Flush, Chamfer W/Bearing . . . . . . . . . . . . . . . . . . . . . . . . . .28  Cove, Corner Round, Roman O-Gee W/Bearing . . . . . . . . . . . . . . . . . . . . . .29  Ball Bearings and Arbors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30  Brad Point, Hinge Boring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32  Counter Bore (Face Frame) and Replacement Drill . . . . . . . . . . . . . . . . . . .32   Florida Toll Free: 1-800-EVRLAST • New York Toll Free: 1-800-TCT SAWS     WARRANTY   Everlast (hereinafter) “we”, “our”, and “us”) warrants each tool to be  free of defects at the time of manufacture and, within the limits of our control, for the normal life of the tool, provided the tool has not been  misapplied or misused. This warranty does not extend to any tool  which has been worn out or made dull from extended use or which  has been altered or modified by sharpening or other servicing per-  formed on the tool by a facility other than our own. Any tool believed  to be a defective should be returned to us, postage prepaid, for our inspection so that we may determine whether or not a defect exists. If  we determine a tool to be defective, we will repair or replace it, at our  option, free of charge. We disclaim responsibility for any incidental or  consequential damages arising from the failure of any tool to conform  to this warranty or other standards. The above warranty is in lieu of  all other warranties express or implied. Everlast is continuously involved in research to upgrade the quality and productivity of its  tools, and users are invited to contact Everlast for information about  the most up-to-date developments and improvements in its tool  technology.     CARBIDE TIPPED  CIRCULAR SAW BLADES     This leaflet of safety and operating  instructions is not intended to be and is  not totally comprehensive; that is it  does not and cannot cover every  possible safety problem which may arise in using specialized and standard tooling on varying machines and  applications. This leaflet is rather  intended to generally describe many of  the basic safety and operating  procedures which should be followed  and to describe the types of safety con-  siderations which should be consid- ered in operating cutting tools.  None of the statements or information  presented in this leaflet should be interpreted to imply any warranty or  safety protection.  The drawings do not depict any  particular design, type, or size of tools  equipment or machines. The drawings  are illustrative only and are not to be construed to establish any exact mode, method or procedure.  All Federal and State laws and regulations having jurisdiction covering  the safety requirements of cutting tools  at the point of usage take precedence  over the statements and information  presented in this leaflet. Users of  cutting tools must of course adhere to  all such regulations. As an aid to cutting tools users a number of such  regulations are listed below. The list  does not include all regulations that  may apply. 1. The Federal Register dated June 27  1974 Dept.of Labor Office of Safety and Health Administration (The  OSHA Act)  2. American National Standards  Institute, 01.1-1975 (Safety Regulations for Woodworking Machinery)  3. American National Standards  Institute 02.1-1969 (Safety  Requirements for Sawmills).  4. American National Standards  Institute P1.1-1969 (Safety Requirements for Pulp Paper and  Paper board Mills).  5. Other ANSI, State and/or Federal  Codes and Regulations which may  apply in your operation.  SAFETY RULES WHICH APPLY TO THE OPERATION OF ALL CARBIDE  TIPPED CUTTING TOOLS  1. Always inspect the cutting tool com-  pletely before mounting. Never attempt  to operate a tool which has chipped or  bent teeth or cutting edges or teeth that are not sharp. You must be familiar with  normal wear conditions for the type of  tooling to be used. The tool must be completely clean to allow proper visual  inspection.   2. Do not attempt to operate cutting  tools or machinery with which you are  not familiar or have not received opera-  tional training—get assistance from your supervisor, his designated repre-  sentative, or a trainer who is familiar  and properly trained and experienced  on the machine to insure your safety.  Become completely familiar with all of the machinery manufacturer's written instructions, guides and manuals  before operating machine. You must  use and be familiar with all controls  safety devices and emergency stop mechanisms to operate a machine  safely.  3. Never operate a cutting tool that is  not properly aligned to the direction of  feed. Do not allow sideward twisting or  other than forward pressure on the  cutting tool in feeding material into a  cut.  4.Make sure the tool is mounted to  rotate in the proper direction before  cutting any material. The tool must  rotate against, rather than with the  direction of feed on all hand feed machines. Do not climb on hand feed  machines.  5. Do not cut materials of a type  hardness 1 or density 2 other than that  which the cutting tool was designed to  cut. Never attempt to cut materials with a tool unless you have personally checked with your supervisor to make  sure the cutting tool was designed for the specific type of material you wish to  cut and for the depth of cut desired.  This is particularly important when  attempting to cut "stacked" material i.e. cutting more than one piece at a time.  6. Never force-feed materials into a  cutting tool such that it causes the tool or machine motor to slow down below operating speeds. A safe and proper  cutting operation will not require much  force in feeding material. If material  begins to "ride up" on the cutting tool or  requires undue pressure to feed the  material into the tool or if undue vibra- tion is experienced do not continue the  cut—turn off all power and correct the  condition.  7. Keep body and clothing well clear of  all cutting tools and other moving parts  while the machine is in operation. Use  work holding fixtures and mechanical  feed devices in all possible cases.  When cutting material of such size shape or type that it necessitates close  approximation to the cutter and  mechanical feed  1. Hardness is the resistance of a  material-to being cut or the strength  of a material to resist tearing or  breaking.  2. Density is the compactness of a  material compared to its volume.   mechanisms cannot be used, use a  wood “push stick” to feed the material so that no part of your body or clothing  comes close to the cutting tool .  8. Never attempt to clean a cutting tool or clear pieces of material from the  cutting area while machine power is  "on" or when cutting tools, material or  any part of the machine is moving.  Allow cutter rotation to stop by itself, or  by use of a brake if supplied on the  machine. Never attempt to stop or slow  a rotating cutting tool by applying a hand-held or any other object to the  cutter, arbor, spindle or drive as a brake.  9. Do not place your body in the  rotational path of a cutting tool unless absolutely necessary and then only if there is a complete and adequate  barrier between you and the cutting  tool. Remember that carbide tips are very hard, and therefore brittle. The tips  can break away under incorrect side  thrust or twisting forces or if foreign  material is allowed to contact the tips.  An operator can reduce the danger of  being hurt by a "kickback" of the material if he always stands beside the  material he is feeding into the machine rather than in back of it. 10. Never leave machines unattended  while cutting tools are still rotating or any part of the machine or material is  moving.  11. Never operate a machine without  using all of the hoods, guards, hold-  downs and safety devices for the  machine being operated.  12. Machines must be maintained to  the manufacturer's standards and  current safety standards.  13. Always wear safety glasses or face shield to completely protect your eyes when operating cutting tools.  CIRCULAR SAW BLADES AND SAW  MACHINE TOOLS MOUNTING INSTRUCTIONS  1. TURN OFF AND LOCK OUT ALL  MACHINE POWER. Clean the saw  arbor, saw collars, sleeve and arbor  nut. Remove nicks and burrs by very  lightly honing any nicked or burred  area. (Do not use coarse tiles or  abrasives) . 2. WITH ALL MACHINE POWER OFF  AND LOCKED OUT pull and push on  the machine arbor sideways in and out by hand (without rotating the arbor).  There should be no feeling of move- ment. Next rotate the arbor by hand. If  the bearings are in proper condition the  arbor should turn freely with no sticking or rubbing. To check the arbor set up a  dial indicator as shown in Fig.1. The arbor should run true within the motor  Reproduced with  permission from WMMA.   SAFETY GUIDE  for the operation of  CARBIDE TIPPED SAW BLADES  Read Completely Before Attempting To Operate Carbide Tipped Saw Blades   4   manufacturerʼs specifications. Set the dial indicator to bear on the fixed collar  of the arbor and turn the arbor (Fig 2)  The collar should run true within the  machine manufacturer s specifications.  3. WITH ALL POWER OFF AND  LOCKED OUT, align the saw blade  with the direction of feed. A method of  checking alignment is to mount a flat  ground plate of 10 or l2 inches diame-  ter by 1/4 inch thick on the saw arbor in  the same manner as a saw blade (see  Fig. 3). Set up a dial indicator  so it can be moved by hand along the  guide rail or feed mechanism. Position  this dial indicator so it can traverse across the plate either above or below  the mounting collars. Set the dial indi-  cator to zero at the leading edge of the  plate (Position A. Fig. 3) and move it  across the plate to the trailing edge  (Position B Fig. 3)     Any error in the plate flatness can be  eliminated by rotating the plate by hand  so that point A is moved to point B  when reading the indicator. Any devia-  tion in angularity between the saw  blade and the direction of feed should  be maintained within the machine man-  ufacturerʼs recommendations. On dou-  ble cut-off and panel trim machines any  slight angularity in alignment should be controlled so that the trailing edge of the saw blades do not re-cut the  material. 4. WITH ALL MACHINE POWER OFF  AND LOCKED OUT, inspect the saw  blade before mounting The bore (center  hole) must be the correct size and fit  snugly. Do not force a saw or other type  of tool on an arbor. Do not tighten mounting screws unequally or use  incorrectly fitted keys. Incorrect mount-  ing of saws or other tools can cause  tool breakage and create dangerous operating conditions. Never mount a  saw blade with a damaged (deeply  scored or out of round) bore or arbor.  Inspect the teeth carefully. Do not  mount blades with damaged bodies dull  or damaged (bent or chipped) teeth.  Never use anything other than accurate  metal shims or spacers if saw blades  have to be positioned on the arbor. Never use shims to “wobble” a saw  blade3. Be sure that all saw collars used  match exactly in diameter. Closely check to see that the arbor nut threads  are not worn and the wrench surfaces of the arbor nut are not rounded off. 5. WITH ALL MACHINE POWER OFF  AND LOCKED OUT, mount the saw  blade on the arbor making sure that the  saw blade is turning in the correct  rotation and that the arbor nut tightens  in a direction opposite to the blade  rotation (See Fig 4A & 4B) Unless the  machine is specifically designed for  such cutting, never mount saw machine  tools to "climb cut" (teeth cutting in the  same direction of feed) on manually fed  machines.. Never use saw blades on  operations for which they were not  designed; for example, do not use rip design blades to cut across the grain,  etc. CIRCULAR SAW BLADES AND SAW  MACHINE TOOLS START-UP PROCEDURES 1. TURN OFF AND LOCK OUT ALL MACHINE POWER. Never assume  previously set machine or tool condi-  tions to be correct. Be sure that 3. Mounting a saw blade to "wobble"  means to shim the blade body unequally on one side, throwing the  saw out of alignment with the arbor.  This causes the saw to make a wider  cut and dangerously increases  pressures on the tool.   the tool is correctly mounted, properly  locked on the arbor (See Fig 4A & 4B),  turns freely (no foreign objects in tool  rotation path) and is properly positioned for the cutting operation required(See  Fig 3). Check to see that the cutting tool  is not dull or damaged. Check to see  that the body of the saw blade is not  cracked4. Take special precaution to  check "stacked cutters" to be sure that  all bolts, pins and threaded parts are  not worn or damaged, and are properly  mounted. Be sure that hubs on all "split"  circular tools are properly fitted and  pinned and that the locking collars are  in place and fit properly. Do not use locking collars that are not matched to  the "split tool ". Split collars on split  tools ar not recommended. 2. WITH ALL MACHINE POWER OFF  AND LOCKED OUT insure that you are  not attempting to operate tools that do  not conform to the machine  manufacturer's machine load  specifications in either size or weight, or  that do not mount according to the machine design limitations. Operate saw machine tools only on the type of  materials, cutting loads and operation  applications for which the tools were  designed. (If you don't know this infor-  mation, ask your supervisor) Do not  operate saw blades or saw machine  tools in excess of the machine or tool  manufacturerʼs specifications, or current applicable OSHA standards, or in  excess of 18,000 sfm (surface feet per minute) 5 (See Charts A and B follow-  ing) 3. WITH ALL MACHINE POWER OFF  AND LOCKED OUT position the cutting  tool, material guides and material hold- downs so that the material to be cut is  fully supported. This will insure there  will be minimal material vibration. Next,  follow the machine manufacturer's instructions to mount all guards over the  tools such that the guards are close to,  but properly clear, the material being  cut. Mount and activate all of the  machine safety devices such as  Anti-kickback mechanisms, spreaders,  dust hoods and safety switches. Make  sure all personnel and all loose or  foreign objects are clear of the machine  and cutting tools.  4. TURN ON MACHINE POWER, start  the tool rotation slowly before feeding  material. This is done by “jogging” (that  is, pressing the start button and  immediately after that pressing the stop  button ). At a safe distance, observe the operating condition of the tools (by sight  and sound) as they rotate slowly. Next,  TURN ALL MACHINE POWER OFF AND LOCKED OUT, wait until all  cutting tools stop rotating by themselves  (do not attempt to stop their rotation yourself unless a brake is specifically  provided for that purpose on the  machine), and make any necessary  corrections. Go through all steps noted  in paragraph 3, just above, before you  TURN THE MACHINE POWER ON. Press the start button and allow the  machine to operate at full speed  4. "All cracked saws shall be removed  from service," Department of Labor  OSHA Standards, Federal Register  29 CFR Part 1910 213(S) (7)  5, The term "surface feet per minute"  refers to the peripheral or rim speed of a cutting tool. See "Operating  Speeds for Carbide Tipped Rotary  Cutting Tools" below.   for at least one minute before feeding  material. OPERATING SPEEDS FOR CARBIDE  TIPPED CIRCULAR SAW BLADES  Carbide tipped circular saw blades of  the types commonly used in the machining of materials typical of the  toughness and density range of most  wood species composition boards,  medium hard plastics, and the softer non-ferrous metals must never be  operated in excess of the machinery or tool manufacturer's recommendations  or current applicable OSHA standards, or in excess of 18,000 sfm (surface feet  per minute) whichever is lowest. Surface feet per minute (sfm) refers to  the peripheral or rim speed of a cutting  tool that is, the speed at which the outer  cutting teeth are rotating when the tool  is at full speed. This speed increases as the tool diameter and/or motor arbor or  spindle rpm increase. The maximum  speed of 18,000sfm is allowable only  when the machinery being used is in  excellent operating condition and is  excellently maintained. When using older or worn machinery, or when  cutting materials of an unusual  toughness 6 or density 7 the surface feet  per minute or material feed rate or both, should be reduced to speeds where,  the tool cuts easily and freely without  excessive vibration or high tooth impact shock. Most woods, plastics,and the  medium-hard non ferrous metals will cut  better with longer tool life at surface feet  per minute ranging from 8,000 sfm to  6 Toughness is the resistance of a  material to being cut or the strength of a material to resist tearing or  breaking.  7 Density is the compactness of a  material compared to its volume.   16,000 sfm, depending on the hardness  and machining characteristics of the material being cut. As the rim speed  (surface feet per minute) of a circular  saw blade is decreased, feed rates  must be decreased accordingly to  prevent the forcing of material into the  cutting tool and overloading of the  cutting teeth. The method of determining the surface  feet per minute (sfm) of rotary cutting  tool is as follows: Remember that changing to a larger  diameter cutting tool at the same  machine spindle or arbor speed  increases the surface feet per minute  rim speed of the tool. Never make  assumptions as to any machine motor  rpm since machines and individual  motors can be modified. WITHOUT  ANY CUTTING TOOLS MOUNTED ON THE MACHINE check the rpm of each  motor using an rpm tachometer. Once  the cutting tool diameter and motor rpm  are known you can check Chart A,  (following) to see if a saw blade will be  operating within the 18,000 surface feet  per minute maximum rim speed  specified. For diameters not covered by  Chart A use the sfm (surface feet per  minute) formula above. For the circular  sawing of magnesium, copper lead,  brass or bronze, note the LOWER  surface speed limitations on Chart B.  For harder or more difficult to cut  materials consult the tool manufacturer.   5   Chart A   Chart B     PLATE  GULLET  EXPANSION SLOT   PIN HOLE   KEYWAY   ARBOR HOLE   HOOK OR RAKE ANGLE   CARBIDE TIP  SHOULDER   GAUGE  DIAMETER  KERF  CARBIDE TIP: Extremely hard and brittle man made material which actually comes in contact with material being cut.  Cemented carbide generally is composed of tungsten carbide powder and cobalt which acts as a bonding agent.  PLATE: Name given to circular body of saw in which teeth are machined in and carbide tips are inserted usually  using silver solder as a bonding agent.  SHOULDER: Portion of tooth directly behind tip in which tungsten carbide is brazed giving strength and support  during cutting operation. HOOK OR RAKE ANGLE: Angle formed when cutting tooth meets center line.  GULLET: Normally circular shape at bottom of a carbide tip which allows for continuous flow of chips during cutting  operation. ARBOR HOLE, BORE, or I.D.: Term used for center hole in saw which is used to mount blade on machine arbor.  Measured in inches or millimeters. KEYWAY: Used on certain machines normally involving multiple blades on one arbor with automatic feeds to prevent  slippage of saws during cutting. PIN HOLE: Same application as keyway except machine normally has only one saw blade.  EXPANSION SLOT: Allows for heat expansion of steel during cutting operation to avoid possible cracking in plate.  GAUGE: Measurement of thickness of steel plate (body).  DIAMETER (O.D.): Measurement of particular cutting tool from the point of one tooth to the point of another tooth  which lies directly opposite.  KERF: Measurement in inches or millimeters which tells the width of a particular cutting tool.   TECHNICAL INFORMATION   TECHNICAL INFORMATION   6 Florida Toll Free: 1-800-EVRLAST • New York Toll Free: 1-800-TCT SAWS     D  4 and 1   T  Triple Chip  TC45  Modified  Triple Chip  R  All Teeth  Beveled Right   C  3 and 1   A  Alternate  Top Bevel   S  Straight Top  L  All Teeth  Beveled Left  AR  Alternate  with Raker   TECHNICAL INFORMATION  STANDARD TOP GRINDS   HI ATB  30° Alternate  Top Bevel  SK  Steel Cut  DCO RH   7 Florida Toll Free: 1-800-EVRLAST • New York Toll Free: 1-800-TCT SAWS     GLUE LINE RIP SAWS Triple Chip   An extremely stable saw offering smoother cutting for all glue line applications on either straight or shadow line rip  saws.   HEAVY DUTY RIP SAWS Straight Top   A saw especially developed for fast cutting on both hand and power feed ripping operations. This is  accomplished by extremely large gullets, heavier plates and use of the proper clearances designed for this type of  heavy duty cutting in both hard or soft woods.   Saw No. GL1030 GL1230 GL1236 GL1436  GL1436D GL1636 GL1636D   Diameter  10” 12” 12” 14” 14” 16” 16”   Plate  Thickness  .095  .110 .118  .120 .120 .120 .120   Kerf  .145 .160 .160 .170 .170 .170 .170   Bore  5/8”  1”  3-1/8”  1”  2”with9/16” phon5”b/c  1”  2”with9/16” phon5”b/c   Hook  20° 20° 20° 20° 20° 20° 20°  Saw No. HD824 HD924 HD1024 HD1024A HD30024 HD1224 HD1424 HD1636 HD1840   Diameter  8” 9”  10” 10”  300mm  12” 14” 16” 18”   Plate  Thickness  .085 .085 .095 .095  2.2mm  .110  .120 .120 .134   Kerf  .135 .135 .145  .145  3.2mm  .160 .170 .170 .170   Hook  20° 20° 20° 20° 20° 20° 20° 20° 20°   Teeth  24 24 24 24 24 24 24 36 40   *For Mereen-Johnson  **For Diehl   8   Teeth  30 30 36 36 36 36 36   Grind  TCG TCG TCG TCG TCG TCG TCG   Grind  STR STR STR  ATB  STR STR STR STR STR   Everlast offers an alternative to the Forrest Woodworker IITM*Blade. Exceptional cut on rip and crosscut.  Rated: Excellent & Very good in Fine Woodworking Magazine.**   ASTRA WOOD Alternate Top Bevel   Saw No. AGP1040 AGP1060   **Article: “10-in. Combination Table Saw Blades”  *Trademark Forrest Mfg. Co.   Diameter  10” 10”   Plate  Thickness  .085 .080   Kerf  .115 .110   Hook  15°  0°   Teeth  40 60   Bore  5/8” 5/8”   Grind  ATB  ATB   Florida Toll Free: 1-800-EVRLAST • New York Toll Free: 1-800-TCT SAWS   Bore  5/8” 5/8” 5/8” 5/8”  70mm w/2 keys  20mm.w x 10mm.d  24 24 36 40   *  ** **   **   INDUSTRIAL BLADES     GENERAL PURPOSE CUT-OFF SAWS Alternate Top Bevel   Designed for all around general purpose cutting in solid woods, plywood, masonite, chip core, and laminated  formica (single sided).   GENERAL PURPOSE CUT-OFF SAWS Triple Chip   Designed for all around general purpose cutting in solid woods, plywood, masonite, chip core, and laminated  formica (single sided). Please note triple chip grind recommended for cutting all types of abrasive materials, such as chip board or high pressure laminates.   Saw No.  GP840A GP940A GP1040A  GP1240A  GP1440A  GP1640A   Diameter  8” 9”  10” 12” 14” 16”   Plate  Thickness  .085 .085 .085 .095 .120 .120   Kerf  .125 .125 .125 .135 .165 .165   Bore  5/8” 5/8” 5/8”  1” 1” 1”   Hook  15° 15° 15° 15° 15° 15°   Teeth  40 40 40 40 40 40   9   COMBINATION SAWS Alternate with Raker   An excellent all around saw ideally suited for the small woodworking or cabinet shops where one saw is used for all different types of cutting. It can be used for ripping or cross cutting in solid woods, particle board, plywood or laminated panels.   Saw No.  CBS940 CBS1050 CBS1260 CBS1470 CBS1680   Diameter  9”  10” 12” 14” 16”   Plate  Thickness  .085 .085  .110 .110  .120   Kerf  ..125  .125 .155 .155 .165   Bore  5/8” 5/8”  1” 1” 1”   Hook  15° 15° 15° 15° 15°   Teeth  40 50 60 70 80   Grind  AR AR AR AR AR   Grind  ATB  ATB  ATB  ATB  ATB  ATB  Saw No. GP840T GP940T GP1040T  GP1240T  GP1440T  GP1640T   Diameter  8” 9”  10” 12” 14” 16”   Plate  Thickness  .085 .085 .085 .095 .120 .120   Kerf  .125 .125 .125 .135 .165 .165   Bore  5/8” 5/8” 5/8”  1” 1” 1”   Hook  15° 15° 15° 15° 15° 15°   Teeth  40 40 40 40 40 40   Grind  TCG TCG TCG TCG TCG TCG   Florida Toll Free: 1-800-EVRLAST • New York Toll Free: 1-800-TCT SAWS   INDUSTRIAL BLADES     STANDARD PURPOSE CUT-OFF SAWS Triple Chip   For fine finishing cuts in plywood, veneered panel, masonite coated or uncoated, crosscutting in hard or soft woods. Ideal for table saws. Please note triple chip grind recommended for cutting all types of abrasive materials such as  chipboard or high pressure laminates.   SPECIAL PURPOSE CUT-OFF SAWS Alternate Top Bevel   For the smoothest possible finish in plywood, veneer, laminated panels, coated hardboard, for crosscutting of  both hard and soft woods up to 3/4 inch thick.   Saw No. SP71456T SP860T SP22064T SP960T LSP1060T SP30060T SP1260T SP1460T SP1660T SP1860T   Diameter  7-1/4”  8”  220mm  9”  10”  300mm  12” 14” 16” 18”   Plate  Thickness  .072 .085  2.2mm  .085 .085  2.4mm  .095 .109 .109 .134   Kerf  .102 .125  3.2mm  .125 .125  3.4mm  .135 .155 .155 .180   Bore  5/8” 5/8”  30mm  5/8” 5/8”  30mm  1” 1” 1” 1”   Hook  10° 10°  5°  10° 10° 10° 10° 10° 10° 10°   Teeth  56 60 64 60 60 60 60 60 60 60  Saw No.  SPE1080A SPE1280A SPE1210A SPE1480A SPE1410A SPE1680A SPE1610A SPE1620A SPE1880A SPE1810A SPE1820A   Diameter  10” 12” 12” 14” 14” 16” 16” 16” 18” 18” 18”   Plate  Thickness  .085 .095 .095 .109 .109 .109 .120 .120 .134 .134 .134   Kerf  .125 .135 .135 .150 .150 .150 .160 .160 .175 .175 .175   Bore  5/8”  1” 1” 1” 1” 1” 1” 1” 1” 1” 1”   Hook  5° 5° 5°  10°  5°  10°  5° 5°  10° 10° 10°   Teeth  80 80  100  80  100  80  100 120  80  100 120   INDUSTRIAL BLADES   10   Blades for Whirlwind Machine available upon request   *†  †  * 2 ph 7mm dia. on 42mm B/C † MICRO-5 extra hard tips.   STANDARD PURPOSE CUT-OFF SAWS Alternate Top Bevel   For fine finishing cuts in plywood, veneered panels, masonite coated or uncoated, crosscutting in hard or soft  woods. Ideal for table saws.   Saw No. SP71456A SP860A SP960A LSP1060A SP30060A SP1260A SP1460A SP1660A SP1860A   Diameter  7-1/4”  8” 9”  10”  300mm  12” 14” 16” 18”   Plate  Thickness  .072 .085 .085 .085  2.4mm  .095 .109 .109 .134   Kerf  .102 .125 .125 .125  3.4mm  .135 .155 .155 .180   Bore  5/8” 5/8” 5/8” 5/8”  30mm  1” 1” 1” 1”   Hook  10° 10° 10° 10° 10° 10° 10° 10° 10°   Teeth  56 60 60 60 60 60 60 60 60  † MICRO-5 extra hard tips.   †   Grind  ATB  ATB ATB  ATB  ATB  ATB ATB  ATB  ATB   Grind  TCG TCG TCG TCG TCG TCG TCG TCG TCG TCG   Grind  ATB  ATB  ATB  ATB  ATB  ATB  ATB  ATB  ATB  ATB  ATB   Florida Toll Free: 1-800-EVRLAST • New York Toll Free: 1-800-TCT SAWS     INDUSTRIAL BLADES   11   SPECIAL PURPOSE CUT-OFF SAWS Triple Chip   For the smoothest possible finish in plywood, veneer, laminated panels, coated hardboard, for crosscutting of both hard and soft woods up to 3/4 inch thick. Please note triple chip grind recommended for cutting all types of  abrasive materials such as chipboard or high pressure laminates.   Saw No.  SPE1080T SPE1280T SPE1210T SPE1480T SPE1410T SPE1680T SPE1610T SPE1620T SPE1880T SPE1810T SPE1820T   Diameter  10” 12” 12” 14” 14” 16” 16” 16” 18” 18” 18”   Plate  Thickness  .085  .095  .095  .109  .109  .109  .120  .120  .134  .134  .134   Kerf  .125 .135 .135 .150 .150 .150 .160 .160 .175 .175 .175   Bore  5/8”  1” 1” 1” 1” 1” 1” 1” 1” 1” 1”   Hook  5° 5° 5°  10°  5°  10°  5° 5°  10° 10° 10°   Teeth  80 80  100  80  100  80  100 120  80  100 120   Grind  TCG TCG TCG TCG TCG TCG TCG TCG TCG TCG TCG   PLEX-CUT SAWS TC 45   Ideally suited for cutting plastics such as acrylic, plexiglass, lucite, ABS, lexan, and PVC pipe where melting is a  problem. Good for material thickness up to 3/8 inch.   Saw No. PC860 PC1080 PC1280   Diameter  8”  10” 12”   Plate  Thickness  .072 .072 .085   Kerf  .106 .106  .119   Bore  5/8” 5/8”  1”   Hook  5° 5° 5°   Teeth  60 80 80   DOUBLE CUT-OFF & TRIM SAWS 4 & 1 Grind   Extra plate thickness gives these saws extreme stability when used on Double End or Panel Sizing machines,  resulting in a splinter free finish on either sizing or angular cuts.   Saw No.  DCO1280LH DCO1280RH DCO1410LH DCO1410RH DCO1610LH DCO1610RH   Diameter  12” 12” 14” 14” 16” 16”   Plate  Thickness  .120 .120 .134 .134 .134 .134   Kerf  .165  .165  .180  .180  .180  .180   Bore  1” 1” 1” 1” 1” 1”   Hook  10° 10° 10° 10° 10° 10°   Teeth  80 80  100 100 100 100  Grind  TC45 TC45 TC45   Grind  LH  RH  LH  RH  LH  RH   Florida Toll Free: 1-800-EVRLAST • New York Toll Free: 1-800-TCT SAWS     THIN KERF SAWS Alternate Top Bevel   Thin kerf blades create less power drain on machine and allow for minimum of stock waste.   Saw No. TK860A TK1024A TK1060A TK1080A TK1280A   Diameter  8”  10” 10” 10” 12”   Plate  Thickness  .072 .072 .072 .072 .085   Kerf  .102 .102 .102 .102  .115   Bore  5/8” 5/8” 5/8” 5/8”  1”   Hook  5°  15° 10°  5° 5°   Teeth  60 24 60 80 80   THIN KERF SAWS Triple Chip   Thin kerf blades create less power drain on machine and allow for minimum of stock waste. Please note triple chip grind recommended for cutting all types of abrasive materials.   Saw No. TK860T TK1060T TK1080T TK1280T   Diameter  8”  10” 10” 12”   Plate  Thickness  .072 .072 .072 .085   Kerf  .102 .102 .102  .115   Bore  5/8” 5/8” 5/8”  1”   Hook  5°  10°  5° 5°   Teeth  60 60 80 80   Grind  TCG TCG TCG TCG   Grind  ATB  ATB  ATB  ATB  ATB   12   THIN RIM SAWS Alternate Top Bevel or Triple Chip   The perfect saw to use where there is a need for a minimum of stock removal per cut, as in the cutting of plastic or  veneer strips for edge banding. Maximum depth of cut on Thin Rim blade is 1-3/4 inches.   Saw No. TR860A  TR860T  TR1080A  TR1080T  TR1280A  TR1280T  TR1210A  TR1210T   Diameter  8” 8”  10” 10” 12” 12” 12” 12”   Plate  Thickness  .086 .086 .086 .086 .095 .095 .095 .095   Kerf  .086 .086 .086 .086 .092 .092 .092 .092   Bore  5/8” 5/8” 5/8” 5/8”  1” 1” 1” 1”   Teeth  60 60 80 80 80 80  100 100   Thin Rim  Plate  Thickness  .056 .056 .056 .056 .062 .062 .062 .062   Hook  10° 10°  5° 5° 5° 5° 5° 5°  INDUSTRIAL BLADES   Grind  ATB  TCG  ATB  TCG  ATB  TCG  ATB  TCG   Florida Toll Free: 1-800-EVRLAST • New York Toll Free: 1-800-TCT SAWS     Especially designed for cutting wood mouldings on all types of mitre machines and Rockwell type mitre box  saws. Negative tooth design provides the least possible grabbing of material.   ASTRA SERIES MITRE SAWS (Wood and Non-Ferrous)   For the smoothest cutting of wood or aluminum mouldings. Extra stiff plates and special clearances provide  extremely accurate cuts on double mitre machines such as Pistorius, Sampson, CTD, etc. Extra hard MICRO -5  tips used.   Saw No.  MT1060  MT1080  MT1080M  MT1260D  MT1280  MT1280D  MT1210  MT121058 MT1490  MT141058 MT1410  MT1510  MT1610   Diameter  10” 10” 10” 12” 12” 12” 12” 12” 14” 14” 14” 15” 16”   Plate  Thickness  .080 .085 .072 .080 .095 .080 .098 .098 .120  .118 .118  .085 .120   Kerf  .110 .115  .102  .110  .125  .110  .128 .128 .150 .150 .150  .115  .150   Bore  5/8” 5/8” 5/8”  1” 1” 1” 1”  5/8”  1”  5/8”  1” 1” 1”   Hook  -2° -5°  0° 0°  -2°  0°  -5° -5° -2° -2° -2° -2° -2°   Teeth  60 80 80 60 80 80  100 100  90  100 100 100 100  Saw No. ASMT128058 ASNF128058   Diameter  12” 12”   Plate  Thickness  .095 .095   Kerf  .115 .115   Bore  5/8” 5/8”   Hook  -3° -3°   Teeth  80 80   *Thin kerf for Makita, Ryobi,  Craftsman, Dewalt & Hitachi   INDUSTRIAL BLADES   13   MITRE SAWS Alternate with Raker   RADIAL OVERARM SAWS Alternate Top Bevel   An excellent blade for use on all types of radial saws. Due to negative tooth design, this saw offers a minimum of  grabbing which is the main problem on most overarm machines.   Saw No.  RO1024 RO1230 RO12301 RO1260 RO12601 RO1440 RO1640 RO1672   Diameter  10” 12” 12” 12” 12” 14” 16” 16”   Plate  Thickness  .095 .095 .095 .095 .095 .120 .120  .110   Kerf  .135 .135 .135 .135 .135 .165 .165 .155   Bore  5/8” 5/8”  1”  5/8”  1” 1” 1” 1”   Hook  -2° -2° -2° -2° -2° -2° -2° -2°   Teeth  24 30 30 60 60 40 40 72   Grind  ATB ATB ATB ATB ATB ATB ATB ATB  Grind  AR AR AR  ATB  AR AR AR AR AR AR AR AR AR  Grind  AR  TCG   Application  Wood  Non-ferrous  (Aluminum)   * * * *   Florida Toll Free: 1-800-EVRLAST • New York Toll Free: 1-800-TCT SAWS     14   DOUBLE FACE LAMINATE SAWS 30° ATB   Smoothest cutting saw for double sided materials such as Melamine, Kortron & Veneer. Can be used on radial  or table saws.   MICRO-5 DOUBLE FACE LAMINATE SAWS 30° ATB   Smoothest cutting saw for double sided materials such as Melamine, Kortron & Veneer. Can be used on radial  or table saws. Extra hard MICRO-5 tips last 3-5 times longer than normal carbide.   DOUBLE FACE LAMINATE SAWS TC 45   The perfect saw for the best possible cutting of formica and Melamine laminated panels. These blades can  perform equally as well on both radial or table saws.   Saw No. DFL86030  DFL108030  DFL121030  DFL141030  DFL162030   Diameter  8”  10” 12” 14” 16”   Plate  Thickness  .085 .085 .095  .118  .120   Kerf  .115 .115  .125 .148 .150   Bore  5/8” 5/8”  1” 1” 1”   Hook  -5° -5° -5° -2° -2°   Teeth  60 80  100 100 120  Saw No. DFL2206430  DFL2508030  DFL1080305  DFL3001030  DFL1210305   Diameter  220mm  250mm  10”  300mm  12”   Plate  Thickness  .085 .085 .085 .085 .095   Kerf  .125  .115 .115 .115  .125   Bore  30mm  30mm  5/8”  30mm  1”   Hook  -5° -5° -5° -5° -5°   Teeth  64 80 80  100 100  Saw No. DFL860 DFL1080 DFL1210 DFL1410 DFL1620   Diameter  8”  10” 12” 14” 16”   Plate  Thickness  .085 .085 .095 .120 .120   Kerf  .115 .115  .125 .150 .150   Bore  5/8” 5/8”  1” 1” 1”   Hook  -5° -5° -5° -2° -2°   Teeth  60 80  100 100 120   NOTE: Not recommended for machines with power feeds or if material is being stacked.   NOTE: Not recommended for machines with power feeds or if material is being stacked.  NOTE: Not recommended for machines with power feeds or if material is being stacked.   Grind  30°ATB  30°ATB  30°ATB  30°ATB  30°ATB   Grind  30°ATB  30°ATB  30°ATB  30°ATB  30°ATB   Pinholes  2/7/42  2/7/42;2/10/60  2/7/42;2/10/60  Grind  TC45  TC45  TC45  TC45  TC45   Florida Toll Free: 1-800-EVRLAST • New York Toll Free: 1-800-TCT SAWS   INDUSTRIAL BLADES     INDUSTRIAL BLADES   15   DOUBLE FACE VENEER SAWS Alternate with Raker   A saw specifically recommended for the cutting of double sided veneered panels either with or against the grain.  Will also give splinter free cuts in plywood. Also for the cutting of veneer or hardwood strips for edge banding.   Saw No.  DFV860  DFV1080  DFV1210  DFV1410  DFV1620   Diameter  8”  10” 12” 14” 16”   Plate  Thickness  .085 .085 .095 .120 .120   Kerf  .115 .115  .125 .150 .150   Bore  5/8” 5/8”  1” 1” 1”   Hook  -5° -5° -5° -2° -2°   Teeth  60 80  100 100 120   NON-FERROUS METAL CUTTING SAWS Triple Chip   Saw No. NF740  NF860  NF1060  NF1060TK  NF1072  NF1080  * NF1080M  NF1010  NF1260  NF12601  NF1280  * NF1280D  NF1210  NF121058  NF1490  NF1410  NF141058  * NF1510  NF1610  NF1810  NF2020   Diameter  7-1/4”  8”  10” 10” 10” 10” 10” 10” 12” 12” 12” 12” 12” 12” 14” 14” 14” 15” 16” 18” 20”   Plate  Thickness  .080 .085 .085 .080 .095 .094 .072 .094 .095 .095 .095 .080 .098 .098 .120 .120  .118  .085 .120 .134 .134   Kerf  .110 .115 .115 .110  .108 .124 .102 .124 .125 .125 .125  .110  .128 .128 .150 .150 .150  .115  .150 .165 .170   Bore  UNIV.  5/8” 5/8” 5/8” 5/8” 5/8” 5/8” 5/8” 5/8”  1” 1” 1” 1”  5/8”  1” 1”  5/8”  1” 1” 1” 1”   Hook  -2° -2° -2° -2° -2° -5°  0°  -5° -2° -2° -2°  0°  -5° -5° -2° -2° -2° -2° -2° -2°  0°   Teeth  40 60 60 60 72 80 80  100  60 60 80 80  100 100  90  100 100 100 100 100 120  *Thin kerf for Makita, Ryobi, Craftsman, Dewalt & Hitachi.   STEEL-KUT (FOR FERROUS METAL)   “Steel-Kut” advantages: Long life compared to grinding discs, can be resharpened many times, excellent cut  quality, no danger of sparks during cutting, cuts faster than grinding disc. “Steel-Kut” can be used for cutting the  following materials: Steel bars, rebars, angle iron, steel channel, flat steel, aluminum bars, flat stock. “Steel-Kut”  can be used on dry-cutting chop saw such as Jepson, provided the recommended RPM is not exceeded.   Saw No. JEP1050 JEP1260 JEP1280 JEP1472   (Recommended R.P.M.:10"-1,750, 12"-1,500, 14"-1,300)   Diameter  10” 12” 12” 14”   Plate  Thickness  .072 .072 .072 .072   Bore  5/8”  1” 1” 1”   Kerf  .088 .088 .088 .088   Hook  0° 0° 0° 0°   Teeth  50 60 80 72   Grind  AR AR AR AR AR  Grind  TCG TCG TCG TCG TCG TCG TCG TCG TCG TCG TCG TCG TCG TCG TCG TCG TCG TCG TCG TCG TCG   Saw blades for vinyl window  moulding can be supplied  upon request   Designed for smooth, burr free cuts on all types of aluminum extrusions, thin wall tubing and thin gauge sheets  with a wall thickness of 1/16 inch to 1/8 inch. These blades work particularly well on double mitre or portable  mitre box machines. Please note that a lubricant should always be used during cutting and material should  always be firmly secured while being cut.   Florida Toll Free: 1-800-EVRLAST • New York Toll Free: 1-800-TCT SAWS     For use on various models of vertical and horizontal panel saw machines. MICRO-5 extra hard micro grain tips  used on all panel saw blades.   Saw No. SP22064T DFL2206430 DFL2508030 SP30060A SP30060T SPE30072T SPE30010T DFL3001030  TK35072T  TK35072T1  SPE35072T3 SPE35072T80 SPE38072T60 SPE38072T75 SPE40072T30 SPE40072T75   Diameter  220mm  220mm  250mm  300mm  300mm  300mm  300mm  300mm  350mm  350mm  350mm  350mm  380mm  380mm  400mm  400mm   Plate/Kerf  (mm)  2.2 / 3.2 2.2 / 3.2 2.2 / 2.9 2.4 / 3.4 3.0 / 4.4  2.2 / 3.2 2.4 / 3.4 2.2 / 3.0 2.5 / 3.5 2.5 / 3.5 3.0 / 4.4 3.0 / 4.4 3.4 / 4.8 3.0 / 4.4 3.0 / 4.4 3.0 / 4.4   Bore  30mm  30mm  30mm  30mm  30mm  30mm  30mm  30mm  30mm  1”  30mm  80mm  60mm  75mm  30mm  75mm   Hook  5°  -5° -5°  10° 13° 10°  5°  -5°  10° 10° 13° 13° 13° 13° 13° 13°   Teeth  64 64 80 60 60 72  100 100  72 72 72 72 72 72 72 72   16   ASTRA SERIES PANEL SAWS Metric Diameter MICRO-5 Tips   SPLIT SCORING SAWS Straight Top   Used on sliding carriage panel saws to score the bottom of panels, thus allowing large saw to cut through without  chipping material on bottom side. Shims are provided to adjust kerf to match large blade.   Saw No.  SS10010 SS12012 SS12012-34 SS12012-20 SS12012-50   Diameter  100mm 120mm 120mm 120mm 120mm   Kerf  2.8 - 3.6mm 2.8 - 3.6mm 2.8 - 3.6mm 2.8 - 3.6mm 2.8 - 3.6mm   Bore  22mm 22mm  3/4”  20mm 50mm   Teeth  2 x 10  2 x 12  2 x 12  2 x 12  2 x 12  NOTE: 20mm and 3/4” bushings available   Pinholes  2/7/42  2/7/42  2/7/42;2/10/60 2/7/42;2/10/60 2/7/42;2/10/60 2/7/42;2/10/60  2/10/60  2/10/60  2/7/110;2/14/110   ASTRA SERIES SCORING SAWS Straight Top and Conical Sides   Saw No. S10020 S420 S43424 S12524 S524 S624 S1603655 S1752845 S1803645 S2003620 S2003645 S2003665   Diameter  100mm  4”  4-3/4”(120mm)  125mm  5” (125mm)  6” (150mm)  160mm 175mm 180mm 200mm 200mm 200mm   Bore  5/8” 5/8” 5/8”  45mm  5/8” 5/8”  55mm 45mm 45mm 20mm 45mm 65mm   Teeth  20 20 24 24 24 24 36 28 36 36 36 36   Hook  8° 8°  10° 10°  8° 8° 5° 8° 8° 8° 8° 8°   Used on both sliding carriage and beam type panel saws to score the bottom of panels, thus allowing large saw to  cut through without chipping material on bottom side.   Pinholes  3/7/66  2/9/110   Grind  TCG  30°ATB  30°ATB  ATB  TCG  TCG TCG  30°ATB  TCG TCG TCG TCG TCG TCG TCG TCG  Grind  STR (Conic.)  STR (Conic.)  STR (Conic.)  STR (Conic.)  STR (Conic.)  STR (Conic.)  STR (Conic.)  STR (Conic.)  STR (Conic.)  STR (Conic.)  STR (Conic.)  STR (Conic.)   Grind  STR STR STR STR STR   Florida Toll Free: 1-800-EVRLAST • New York Toll Free: 1-800-TCT SAWS   INDUSTRIAL BLADES     ASTRA SERIES PANEL SAW SETS Metric Diameter   Saw No.  SPE38072T60 S2003645 SPE40072T30 S2003620 SPE35072T80 S1603655   Diameter  380mm 200mm 400mm 200mm 350mm 160mm   Plate  3.4 3.4 3.0 3.0 3.0 3.0   Bore  60mm 45mm 30mm 20mm 80mm 55mm   Kerf  4.8  4.7 / 5.7  4.4  4.3 / 5.3  4.4  4.3 / 5.3   Teeth  72 36 72 36 72 36   Grind  TCG  STR  (Conical)  TCG  STR  (Conical)  TCG  STR  (Conical)   FOR THE HOLZMA  FOR THE SCHELLING  FOR THE SCMI   INDUSTRIAL BLADES   17   Designed to give highest quality, smoothest chip-free cuts on laminated post form countertops with backsplash.  Ideally suited for post form countertop machines such as Midwest Automation and Edgetech.   Saw No.  CT1620  Diameter  16”   Plate  Thickness  .118  Kerf  .150  Bore  1”  Hook  -2°  Teeth  120   COUNTERTOP SAW TC45   ASTRA SERIES SOLID SURFACE SAWS TC 45   Saw No. DFLC71440 DFLC860 DFLC22064 DFLC25080 DFLC1060 DFLC1080 DFLC30010 DFLC1210   Diameter  7-1/4”  8”  220mm  250mm  10” 10”  300mm  12”   Plate  Thickness  .080 .086 .085 .085 .086 .086 .085 .095   Kerf  .104  .110 .115 .115 .110 .110 .115 .117   Bore  Univ.  5/8”  30mm  30mm  5/8” 5/8”  30mm  1”   Hook  -2° -2° -5° -5° -2° -5° -5° -5°   Teeth  40 60 64 80 60 80  100 100  * MICRO-5 extra hard tips.   For the smoothest cutting on solid surface materials such as Corian®, Avonite®, Fountainhead® and Gibraltar ®,  etc. Special clearances allow for smoothest cut on these materials. Gives a finish which requires virtually no  sanding or polishing. Seam quality cut.   Hook  13°  8°  13°  8°  13°  5°  * *2 ph 14mm on 110mm B/C  **3 ph 7mm on 66mm B/C   **   Grind  TC45  Grind  TC45 TC45 TC45 TC45 TC45 TC45 TC45 TC45   Pinholes  2/7/42  2/7/42;2/10/60  2/7/42;2/10/60   * * *   Florida Toll Free: 1-800-EVRLAST • New York Toll Free: 1-800-TCT SAWS     Saw No. DC616 DC618 DC614 DC816 DC818 DC814 DC816N DC818N DC814N DC1016 DC1018 DC1014 DC1216 DC1218 DC1214   Diameter  6” 6” 6” 8” 8” 8” 8” 8” 8”  10” 10” 10” 12” 12” 12”   Kerf  1/16”  1/8” 1/4”  1/16” 1/18”  1/4”  1/16” 1/18”  1/4”  1/16”  1/8” 1/4”  1/16”  1/8” 1/4”   Bore  5/8” 5/8” 5/8” 5/8” 5/8” 5/8” 5/8” 5/8” 5/8” 5/8” 5/8” 5/8”  1” 1” 1”   Hook  15° 15° 15°  0° 0° 0°  -5° -5° -5°  15° 15° 15° 15° 15° 15°   Hook  -5° -5°   DADO SETS Standard #3 Set   Offers the woodworking shop one tool which will cut various size grooves up to 13/16 inch maximum width of cut.  Can be used to cut either with or against grain. Fine Tooth Dado recommended for plywood, Melamine, or where  extra smooth cut is needed.   OUTSIDE DADO SAWS   DADO CHIPPERS   Saw No. DS6 DS8 DS801 DS10 DS101 DS12   Diameter  6” 8” 8”  10” 10” 12”   Width of  Cut  1/4” to 13/16” 1/4” to 13/16” 1/4” to 13/16” 1/4” to 13/16” 1/4” to 13/16” 1/4” to 13/16”   Bore  5/8” 5/8”  1”  5/8”  1” 1”   Hook  15°  0° 0°  15° 15° 15°   Teeth  18 24 24 24 24 24  Saw No. OS6L OS6R OS8L OS8R OS840L OS840R OS10L OS10R OS12L OS12R   Diameter  6” 6” 8” 8” 8” 8”  10” 10” 12” 12”   Kerf  1/8” 1/8” 1/8” 1/8” 1/8” 1/8” 1/8” 1/8” 1/8” 1/8”   Bore  5/8” 5/8” 5/8” 5/8” 5/8” 5/8” 5/8” 5/8”  1” 1”   Hook  15° 15°  0° 0°  -5° -5°  15° 15° 15° 15°   Teeth  18 24 24 24 40 40 24 24 24 24   Saw No. DS840 DS8401   Diameter  8” 8”   Width of  Cut  1/4” to 13/16”  1/4” to 13/16”   Bore  5/8”  1”   Teeth  40 40   Fine Tooth Dado Set   One set consists of: Two 1/8” outside blades  Two 1/8” chippers  One 1/4” chipper One 1/16” chipper   18 Florida Toll Free: 1-800-EVRLAST • New York Toll Free: 1-800-TCT SAWS   INDUSTRIAL DADO SETS   Grind  Left  Right  Left  Right  Left  Right  Left  Right  Left  Right     GROOVERS - SQUARE FACE & TOP Straight Top   A single purpose tool to be used when a specific width of groove is desired for production runs. Will give good  finish cuts when run with grain of material.   BISCUIT CUTTER BLADE Alternate Top Bevel   Replacement blade for most biscuit jointers such as Lamello, Virutex, etc.   Groover No.  G4184  G43164  G4144  G6188  G63168  G6148  G65168  G6388  G6128  G831612  G81412  G851612  G83812  G81424  G83824  G1031624  G101424  G1051624  G103824   Diameter  4” 4” 4” 6” 6” 6” 6” 6” 6” 8” 8” 8” 8” 8” 8”  10” 10” 10” 10”   Kerf  1/8”  3/16”  1/4” 1/8”  3/16”  1/4”  5/16”  3/8” 1/2”  3/16”  1/4”  5/16”  3/8” 1/4” 3/8”  3/16”  1/4”  5/16”  3/8”   Bore  5/8” 5/8” 5/8” 5/8” 5/8” 5/8” 5/8” 5/8” 5/8” 5/8” 5/8” 5/8” 5/8” 5/8” 5/8” 5/8” 5/8” 5/8” 5/8”   Teeth  4 4 4 8 8 8 8 8 8  12 12 12 12 24 24 24 24 24 24   Also Available: Fine Tooth Groovers,  Shear Face, and Specialty Groovers.   Saw No. LAM10012  Diameter  100mm   Plate  Thickness  .118  Kerf  4mm  Bore  22mm  Hook  15°  Teeth  12   19   EDGE BANDER SAWS Alternate Top Bevel or All Teeth Beveled to Left or Right   A specially designed saw for both single or two sided edge banding machines, for the end trimming of either  wood or plastic banding materials.   Saw No.  EB420 EB4200 EB4524 EB43424 EB524 EB5530 EB640 EB6400   Diameter  4” 4”  4-1/2” 4-3/4”  5”  5-1/2”  6” 6”   Plate  Thickness  .085 .085 .085 .085 .085 .085 .085 .085   Kerf  .125  .125  .125  .125  .125  .125  .125  .125   Bore  5/8” 5/8” 5/8” 5/8” 5/8” 5/8” 5/8” 5/8”   Hook  8° 0°  10° 10°  8° 6° 6° 0°   Teeth  20 20 24 24 24 30 40 40   NOTE: When ordering Alternate Top Bevel add letter A after Saw No.  For Left Bevel add letter L after Saw No.  For Right Bevel add letter R after Saw No.   Grind  ATB   Florida Toll Free: 1-800-EVRLAST • New York Toll Free: 1-800-TCT SAWS   INDUSTRIAL BLADES     CUSTOM SAW QUOTATION FORM   20 Florida Toll Free: 1-800-EVRLAST • New York Toll Free: 1-800-TCT SAWS   CUSTOM SAW BLADE QUOTATION FORM   Customer Name________________________________________   Date_______________   Contact_____________________   Address_____________________________   Account #_______________   City__________________ State_____ Zip_______   Phone#__________________ Fax#____________________   Email___________________   Qty_________ Saw Diameter____________   Bore (Arbor)______________   Number of Teeth_________ Grind___________   Hook________ Kerf____________ Plate___________   Keyway(s)____________________________________  Please specify the number of keyways and the width and depth   Pinholes______________________________________  Please specify the number of Pinholes, the diameter and Bolt Circle or Center to Center specification.   Countersunk Pinhole specs:   Application: (specify rip, crosscut, mitre, sizing, etc)__________________________________________________  _____________________________________________________________________________________________   Right________Left_________Every Other_________All________   If Countersunk, please specify side of  blade (face of teeth coming at you)   Material type and thickness:_______________________________________________________   Machine type: (ex.-Table saw, Gang Rip, Straight Line Rip,Sliding Carriage, Vertical or Horizontal Panel Saw,  Mitre, Double Mitre, Radial, Swing, Pop-Up, Portable, Gas Operated, Air etc.)__________________________  ___________________________________________________________________________ ___   Position of saw blades (above or below material)__________________________________________   Feed (manual or power)____________if power - Feed rate in feet per minute ___________________   Saw moves across material____________Material moves across saws_____________________   Type of finish desired (average, good, excellent)__________________________________________   Addtional notes_________________________________________________________________ _____________________________________________________________________________ _____________________________________________________________________________   Please complete as much information as possible:   Please fax completed form to: (239) 596-9616     CARBIDE TIPPED ROUTER CUTTERS   CARBIDE TIPPED ROUTER CUTTERS     This leaflet of safety and operating instructions is not intended to be and is  not totally comprehensive; that is it  does not and cannot cover every possi-  ble safety problem which may arise in  using specialized and standard tooling on varying machines and applications. This leaflet is rather intended to gener-  ally describe many of the basic safety  and operating procedures which should be followed and to describe the types of  safety considerations which should be  considered in operating cutting tools.  None of the statements or information presented in this leaflet should be inter- preted to imply any warranty or safety  protection.  The drawings do not depict any particu-  lar design, type, or size of tools equip-  ment or machines. The drawings are  illustrative only and are not to be con- strued to establish any exact mode, method or procedure. All Federal and State laws and regula-  tions having jurisdiction covering the  safety requirements of cutting tools at the point of usage take precedence  over the statements and information  presented in this leaflet. Users of cut-  ting tools must of course adhere to all  such regulations. As an aid to cutting  tools users a number of such regula-  tions are listed below. The list does not  include all regulations that may apply. 1. The Federal Register dated June 27  1974 Dept.of Labor Office of Safety and Health Administration (The  OSHA Act)  2. American National Standards In  institute. 01.1-1975 (safety Regu-  lations for Woodworking Machinery)  3. American National Standards In  institute 02.1-1969 (Safety Requirements for Sawmills).  4. American National Standards In  institute P1.1-1969 (Safety Require-  ments for Pulp Paper and Paper board Mills).  S Other ANSI, State and/or Federal  Codes and Regulations which may  apply in your operation.  SAFETY RULES WHICH APPLY TO THE OPERATION OF ALL CARBIDE  TIPPED CUTTING TOOLS  1. Always inspect the cutting tool com-  pletely before mounting. Never attempt to operate a tool which has chipped or  bent teeth or cutting edges or teeth that are not sharp. You must be familiar with  normal wear conditions for the type of  tooling to be used. The tool must be  completely clean to allow proper visual inspection.   2. Do not attempt to operate cutting  tools or machinery with which you are  not familiar or have not received opera-  tional training—get assistance from  your supervisor his designated repre- sentative, or a trainer who is familiar  and properly trained and experienced  on the machine to insure your safety.  Become completely familiar with all of  the machinery manufacturerʼs written instructions guides and manuals before operating machine. You must use and  be familiar with all controls safety  devices and emergency stop mecha- nisms to operate a machine safely.  3. Never operate a cutting tool that is  not properly aligned to the direction of  feed. Do not allow sideward twisting or  other than forward pressure on the cut- ting tool in feeding material into a cut. 4.Make sure the tool is mounted to rotate in the proper direction before cut-  ting any material. The tool must rotate  against, rather than with the direction of  feed on all hand feed machines. Do not climb on hand feed machines.  5. Do not cut materials of a type hard- ness 1 or density 2 other than that which  the cutting tool was designed to cut.  Never attempt to cut materials with a tool unless you have personally  checked with your supervisor to make  sure the cutting tool was designed for the specific type of material you wish to  cut and for the depth of cut desired.  This is particularly important when attempting to cut “stacked” material i.e.  cutting more than one piece at a time.  6. Never force-feed materials into a cutting tool such that it causes the tool  or machine motor to slow down below  operating speeds. A safe and proper  cutting operation will not require much force in feeding material. If material  begins to “ride up” on the cutting tool or requires undue pressure to feed the  material into the tool or if undue vibra-  tion is experienced do not continue the  cut—turn off all power and correct the condition.  7. Keep body and clothing well clear of  all cutting tools and other moving parts  while the machine is in operation. Use  work holding fixtures and mechanical  feed devices in all possible cases.  When cutting material of such size shape or type that it necessitates close  approximation to the cutter and mechanical feed.  1. Hardness is the resistance of a  material-to being cut or the strength  of a material to resist tearing or  breaking.  2. Density is the compactness of a  material compared to its volume.   mechanisms cannot be used, use a  wood “push stick” to feed the material  so that no part of your body or clothing  comes close to the cutting tool. 8. Never attempt to clean a cutting tool or clean pieces of material from the cut-  ting area while machine power is “on” or when cutting tools, material or any part of the machine is moving. Allow cutter rotation to stop by itself, or by use of a  brake if supplied on the machine. Never  attempt to stop or slow a rotating cutting tool by applying a hand-held or any  other object to the cutter, arbor, spindle  or drive as a brake.  9. Do not place your body in the  rotational path of a cutting tool unless  absolutely necessary and then only if  there is a complete and adequate barrier between you and the cutting  tool. Remember that carbide tips are very hard, and therefore brittle. The tips can break away under incorrect side thrust or twisting forces or if foreign  material is allowed to contact the tips. An operator can reduce the danger of  being hurt by a “kickback” of the materi-  al if he always stands beside the mate-  rial he is feeding into the machine  rather than in back of it.  10. Never leave machines unattended  while cutting tools are still rotating or  any part of the machine or material is moving. 11. Never operate a machine without  using all of the hoods, guards, hold  downs and safety devices for the  machine being operated. 12. Machines must be maintained to the  manufacturerʼs standards and current  safety standards. 13. Always wear safety glasses or face shield to completely protect your eyes when operating cutting tools.  CARBIDE TIPPED & HIGH SPEED  STEEL ROUTER BIT & ROUTER TOOL MOUNTING INSTRUCTIONS  1. TURN OFF AND LOCK OUT ALL MACHINE POWER. Remove the collet  chuck and collet (see the machine man- ufacturerʼs Instructions) and clean them. Also clean the spindle and tool. Remove all nicks and burrs by very  lightly honing (do not use coarse files or  coarse abrasives). When removing parts and tools from a machine, handle  them carefully. Never use hard metal hammers to loosen machine parts or  tools, and never allow the teeth of cut- ting tools to touch steel even when they  are dull, for this will cause the cutting  edges to be damaged .   2. WITH ALL MACHINE POWER OFF  AND LOCKED OUT, push the machine  spindle up and down and to and from  by hand pressure (without rotating the  spindle) There should be no feeling of  movement. Next rotate the spindle by hand. The spindle should turn freely  without sticking or rubbing if the bear-  ings are in proper condition.  3.WITH ALL MACHINE POWER OFF  AND LOCKED OUT, check the condi-  tion of the collet chuck by mounting the  collet and collet chuck in the spindle  with a ground test bar positioned full  depth into the chuck. A 3 inch length of  drill rod will serve as a test bar. Set up  a dial indictor as shown in Fig. 1 and check the runout of the test bar, turning  the machine spindle by hand. Runout of  the test bar in excess of machinery manufacturerʼs recommendation could  indicate a worn or damaged collet, or  worn spindle bearings or spindle  assembly. Make all corrections neces-  sary before mounting the Cutting tool.  4. WITH ALL MACHINE POWER OFF  AND LOCKED OUT, remove the test  bar and mount the router bit or router  tool in the machine after inspecting the  tool. Do not mount any tool that is dull  or damaged and check shank of bit to  be sure it fits securely into collet. Be  sure the router bit or tool is positioned  completely into the collet to the full  depth of the shank and clamped only on  the smooth, straight surface of the  shank (see Fig. 2). Never clamp only a portion of the shank to “extend” the cut-  ting depth, or clamp on the body below  the shank.   SAFETY GUIDE  for the operation of  CARBIDE TIPPED ROUTER BITS  Read Completely Before Attempting To Operate Carbide Tipped Router Bits   Fig. 1   Fig. 2   22     If there is a radius between the tool  shank and body, be sure to clamp  above the radius. Check the tool with the dial indicator (as in Fig. 3). Tools  that have excessive runout (more than + .002) or that wobble, are unsafe at  the high spindle rotating speeds of  router machines, and must be correct-  ed or replaced.  5. SPECIAL NOTE: Whenever a  router bit is removed from a machine,  inspect the shank for collet markings (brown or black spots, or lines on the  shank). If markings are present, the  collet may be worn and should be  checked. Worn collets cause undue vibration in the router bit, which can work harden the tool causing it to  break.  CARBIDE TIPPED & HIGH SPEED  STEEL ROUTER BIT & ROUTER  TOOL START-UP PROCEDURE  1. TURN OFF AND LOCK OUT ALL MACHINE POWER. Never assume  previously set machine or tool condi-  tions to he correct. Be sure that the  tool is correctly mounted, properly  positioned in the collet chuck and clamped securely, turns freely (no for- eign objects in tool rotation path) and  is properly positioned for the cutting operation required. Check to see that  the cutting tool is not dull.  2. Insure that you are not attempting to  operate tools that do not conform to  the machine manufacturer's machine load specifications in either size or  weight, or that do not mount according  to the machine design limitations. Operate router bits and router tools  only on the type of materials, cutting  loads and operation applications for which the tools and machine were  designed.  3. WITH ALL MACHINE POWER  OFF AND LOCKED OUT, position the  cutting tool, material guide rails and  material hold-downs so that the materi-  al to be cut is fully supported.  This will insure there will be minimal  material vibration. Next, follow the  machine manufacturer's instructions to  mount all guards over the tools such that the guards are close to, but prop- erly clear, the material being cut.  Mount and activate all safety devices  such us anti-kickback mechanisms,   dust hoods, guards and safety switch- es. Make sure all personnel and all  loose or foreign objects are clear of  the machine and the cutting tool.  Insure that the direction of feed of the  material to the cutting tool is proper.  (see Fig. 4) 4. TURN ON MACHINE POWER. Start the tool rotating slowly before  feeding material. This is done by “jog- ging” (that is, pressing the start button  and immediately after that pressing the stop button). At a safe distance,  observe the operating condition of the  tools (by sight and sound) as they  rotate slowly. Next, TURN OFF AND  LOCK OUT ALL MACHINE POWER,  wait until the cutting tool stops rotating  (do not attempt to stop the tool rotation  yourself unless a brake is specifically provided for that purpose on the  machine), and make any necessary  corrections. Any router tool that is dull  or appears to “wobble” when rotating  is dangerous and the situation must be  corrected before attempting to cut any  material (see Router Tool Mounting  Instructions). Adjust the machine feed  guide and machine feed controls (if  automatic) according to machine  manufacturerʼs instructions. Go through all steps noted in paragraph 3,  just above, before you TURN THE  MACHINE POWER ON. Press the  start button and allow the machine to  operate at full idle speed for at least  one minute before feeding material.  Before beginning production cutting,  make a short, shallow cut on a test  piece of the material to be cut to  observe cutting action on the tool  before proceeding to full cut depth  operation. Always start into the cut  slowly and use a smooth steady feed  to allow the tool to cut freely. It will not  take much effort to move material properly through the cut if the routing  operation is set up correctly and safely. CARBIDE TIPPED & HIGH SPEED  STEEL ROUTER BIT & ROUTER  TOOL SPECIAL OPERATING PRE- CAUTIONS READ CAREFULLY 1. Never run router tools in machines  other than router machines. Do not  operate router tools in drill presses,  portable drills, etc.   2. Operate only router tools and router  bits that have the shortest possible  cutting edge length in order to main-  tain the cutting load as close as possi- ble to the collet chuck support (never  use a longer cutting edge length to  “reach” the material). Material should just clear the collet chuck as it moves  through the cut. Do not operate router tools with only part of the tool shank clamped in the collet to make the tool “reach” deep cuts. The entire shank must be clamped in the collet. Do not  clamp the tool on any radius between  the shank and body. 3. Router tools are often limited in capacity of the chip pocket (area in  front of the cutting edge which carries  away the chip) because of the small  diameter of the tool. Over-feeding  (forcing material into the cut) can  cause compression of chips that can  result in bending or breaking of the router bit or tool. Small diameter router  bits are limited in the amount of clear-  ance that can be designed and manu- factured into the tool due to the need  to maximize strength in the tool body. Fast feeding of router bits can result in  overloading the clearance space between the material cut and the steel behind the cutting edge. When such an operating condition occurs, danger-  ous high overload pressures rapidly  develop that can cause bending and  breakage of the tool. Donʼt force-feed  material into these tools. 4. If the cutting tool and the material tend to push away from one another or  if they bounce or vibrate against each other, stop the machine immediately.  Do not use force to continue the cut. Do not operate the machine until the  machine or tool condition is corrected.  5. Never feed material into a router tool when the material is not supported by the machine table and table guide  rails, or that requires the hands or  clothing to be dangerously close to the  rotating parts of the machine. Keep  body and clothing well clear of the  cutting tool while in operation.  6. Always wear safety glasses to com-  pletely protect eyes when operating routing tools. SPECIAL NOTES ON PORTABLE  ROUTERS  A. Follow the machine manufacturerʼs  recommendations on proper inspection  and operation of the portable router.  B. Insure that the unit is unplugged at  all times during inspection.  C. Make sure that the router motor is  clamped securely in the base at all  times.  D. Insure that the router bit shank is  always inserted a minimum of 5/8" up  into the collet.   E. Total router bit runout should not  exceed +.004. F. Inspect the collet frequently. The  collet should be replaced when use  causes wear at point A or at point B  (see Fig. 5). Continued use of such a  worn collet can cause bit vibration and  set up stresses that result in bit  breakage.   Reproduced with  permission from WMMA.   Fig. 3   Fig. 4   Fig. 5   23     TEMPLATE AND PLUNGE CUTTING ROUTER BITS 1/4” Shank   TEMPLATE AND PLUNGE CUTTING ROUTER BITS 3/8” & 1/2” Shank   Tool Number *ERB-1A *ERB-1C *ERB-2A *ERB-2C *ERB-2 *ERB-3  ERB-4 ERB-6 ERB10   Cutting  Diameter  1/8” 1/8”  3/16” 3/16”  1/4” 1/4” 1/4” 3/8” 1/2”   Shank  Diameter  1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 1/4”   Carbide  Length  7/16” 7/16” 7/16” 7/16”  3/4”  1” 1” 1” 1”   Overall  Length  2” 2” 2” 2” 2”  2-3/16”  2-1/4” 2-1/4” 2-1/8”   Shank  Length  1-5/16” 1-5/16” 1-5/16”  1-1/4” 1-1/8”  1”  1-1/4” 1-1/4”  15/16”   No. of  Flutes  1 2 1 2 2 2 2 2 2  Tool Number  *ERB-2B  ERB-4B ERB-7 ERB-8B ERB-8C ERB-11 ERB-12 ERB-12A ERB-13 ERB-13A  *ERB-14 *ERB-14A  ERB-18 ERB-21   Cutting  Diameter  1/4”  5/16”  3/8” 3/8” 3/8” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 3/4”  1”   Shank  Diameter  1/2” 1/2” 3/8” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2”   Carbide  Length  3/4” 3/4”  1” 1”  1-1/4”  1”  1-1/4”  1-1/4”  1-1/2”  1-1/2”  2” 2” 1”  1-1/4”   Overall  Length  2-1/4” 2-1/2” 2-1/2” 2-5/8” 2-7/8” 2-1/2”  2-15/16” 2-15/16”  3-1/8” 3-1/8” 4-1/4” 4-1/4” 2-1/2” 2-7/8”   Shank  Length  1-5/16”  1-1/2”  1-5/16”  1-3/8” 1-3/8”  1-3/16” 1-7/16” 1-7/16”  1-15/16”  1-5/16”  1-7/8” 1-7/8” 1-3/8” 1-5/8”   No. of  Flutes  2 2 2 2 2 2 2 1 2 1 2 1 2 2   *Not guaranteed due to extreme length or fragility.  *Not guaranteed due to extreme length or fragility.   24 Florida Toll Free: 1-800-EVRLAST • New York Toll Free: 1-800-TCT SAWS   ROUTER CUTTERS     CARBIDE TIPPED ROUTER CUTTERS   25   ROUTER CUTTERS   SCREW-TYPE MORTISE BITS AND ARBOR   Tool Number EMB-114 EMB-114X   Cutting  Diameter  1-1/4” 1-1/4”   Carbide  Length  5/8” 5/8”   Thread  Type  1/4”-28  5/16”-24  EA-114 - Arbor for EMB-114 1/2” dia. 1/4” - 28 thread.   RABBETING BITS WITH 1/2” BALL BEARING   Tool Number ERB-24 ERB-25   Cutting  Diameter  1-1/4” 1-1/4”   Shank  Diameter  1/4” 1/2”   Carbide  Length  1/2” 1/2”   Overall  Length  2” 2”   Shank  Length  1-7/16” 1-7/16”   Depth of  Rabbet  3/8” 3/8”   *See page 32 for additional ball bearings to change depth of rabbet.   SOLID CARBIDE COMPRESSION SPIRAL BIT   Tool Number ESSPC-322   Cutting  Diameter  1/2”   Shank  Diameter  1/2”   Carbide  Length  1-1/4”   Overall  Length  3”   No. of  Flutes  2+2   Florida Toll Free: 1-800-EVRLAST • New York Toll Free: 1-800-TCT SAWS   ROUTER CUTTERS     Type of  Cut  7-1/2° Bevel   SOLID CARBIDE FLUSH TRIM BIT 1 Flute   SOLID CARBIDE BEVEL TRIM BIT 1 Flute   Tool Number SCF   Cutting  Diameter  1/4”   Shank  Diameter  1/4”   Overall  Length  1-1/2”  Tool Number SCB   Shank  Diameter  1/4”   Overall  Length  1-1/2”   26   SOLID CARBIDE DADO FLUSH TRIM BIT 1 Flute   Cutting  Diameter  1/4”   Tool Number SCDF   Shank  Diameter  1/4”   Overall  Length  1-3/8”   Florida Toll Free: 1-800-EVRLAST • New York Toll Free: 1-800-TCT SAWS   ROUTER CUTTERS     CARBIDE TIPPED ROUTER CUTTERS SLOTTING CUTTERS   Tool Number EGS-316 EGS-370 EGS-380 EGS-393 EGS-318 EGS-3316 EGS-314 EGS-416 EGS-470 EGS-480 EGS-493 EGS-418 EGS-4316 EGS-616 EGS-670 EGS-680 EGS-693 EGS-618 EGS-6316 EGS-614   Cutter  Diameter  2” 2” 2” 2” 2” 2” 2” 2” 2” 2” 2” 2” 2” 2” 2” 2” 2” 2” 2” 2”   Standard  Hole  5/16” 5/16” 5/16” 5/16” 5/16” 5/16” 5/16” 5/16” 5/16” 5/16” 5/16” 5/16” 5/16” 5/16” 5/16” 5/16” 5/16” 5/16” 5/16” 5/16”   Standard  Kerf  1/16”  .070  .080  3/32”  .125  3/16”  1/4”  1/16”  .070 .080  3/32”  .125  3/16” 1/16”  .070 .080  3/32”  .125  3/16”  1/4”   Number of  Wings  3 3 3 3 3 3 3 4 4 4 4 4 4 6 6 6 6 6 6 6   ROUTER CUTTERS   27   TONGUE & GROOVE ASSEMBLY WITH BALL BEARING 2 Wing   Cutting  Diameter  1-7/8”   Tool Number ETGA-1   Shank  Diameter  1/2”   Depth of  Cut  1/2”  Assembly includes: 1 EA-3 Arbor with Spacers and Nut  2 EB-3 Ball Bearings 2 EGS-214 Slotting Cutters   For 1/2”-3/4” material.   Florida Toll Free: 1-800-EVRLAST • New York Toll Free: 1-800-TCT SAWS   ROUTER CUTTERS     FLUSH CUTTERS WITH BALL BEARING   Tool Number  EFC-1A EFC-1 EFC-2 EFC-3 EFC-4A EFC-4 EFC-6 EFC-8 EFC-10 EFC-11 EFC-12   Cutting  Diameter  1/4” 3/8” 1/2” 1/2” 1/4” 3/8” 1/2” 1/2” 1/2” 1/2” 1/2”   Shank  Diameter  1/4” 1/4” 1/2” 1/4” 1/4” 1/4” 1/4” 1/4” 1/2” 1/2” 1/2”   Overall  Length  2-3/4”  2-5/16”  2-7/8ʼ  2-1/8” 2-1/4”  2-1/16”  1-3/4” 2-1/8” 2-7/8”  4”  4-1/2”   Shank  Length  1-3/8”  1”  1-9/16”  15/16”  1-3/8”  1” 1”  15/16”  1-9/16”  1-5/8” 1-5/8”   No. of  Flutes  2 2 2 2 2 2 2 3 3 2 2   28   TEMPLATE FLUSH CUTTERS WITH UPPER BALL BEARING   Tool Number EFCUB-1  EFCUB-1A  EFCUB-2  EFCUB-3  EFCUB-3A  EFCUB-4   Cutting  Diameter  1/2” 1/2” 5/8” 3/4” 3/4”  1-1/8”   Shank  Diameter  1/4” 1/4” 1/4” 1/4” 1/2” 1/2”   Carbide  Length  3/4”  1”  3/4” 3/4”  2”  1-1/2”   No. of  Flutes  2 2 2 2 2 2   Overall  Length  1-3/4” 2-1/2” 1-7/8”  2” 4”  2-3/4”   CHAMFERING BITS WITH BALL BEARING   Tool Number  ECHB-1 ECHB-2   Degree of  Angle  45 45   Carbide  Length  5/8” 5/8”   Shank  Diameter  1/4” 1/2”   Overall  Length  1-3/4”  2”   Florida Toll Free: 1-800-EVRLAST • New York Toll Free: 1-800-TCT SAWS   Carbide  Length  1” 1” 1” 1”  1/2” 1/2” 1/4”  1” 1”  1-1/2”  2”  ROUTER CUTTERS     CARBIDE TIPPED ROUTER CUTTERS COVE BITS WITH BALL BEARING   CORNER ROUNDING BITS WITH BALL BEARING   Tool Number ECV-2 ECV-3 ECV-4 ECV-5 ECV-6   Radius  1/4” 3/8” 3/8” 1/2”  1/2”   Large  Diameter  7/8”  1-1/8ʼ  1-1/8” 1-3/8” 1-3/8”   Shank  Diameter  1/2” 1/4” 1/2” 1/4” 1/2”   Depth of  Cut  1/2” 1/2” 1/2” 5/8” 5/8”  Tool Number ECR-1B ECR-1C ECR-1 ECR-2 ECR-2A ECR-3 ECR-4 ECR-5 ECR-6 ECR-6A ECR-7   Radius  1/8”  3/16”  1/4” 1/4”  5/16”  3/8” 3/8” 1/2” 1/2” 5/8” 3/4”   Large  Diameter  1/4” 7/8”  1” 1”  1-1/8” 1-1/4” 1-1/4” 1-1/2” 1-1/2” 1-3/4”  2”   Shank  Diameter  1/4” 1/4” 1/4” 1/2” 1/4” 1/4” 1/2” 1/4” 1/2” 1/2” 1/2”   Carbide  Height  1/2” 1/2” 1/2” 1/2” 1/2” 5/8” 5/8” 3/4” 3/4” 3/4”  1”   29   ROMAN O-GEE BITS WITH BALL BEARING   Tool Number EROG-1 EROG-2 EROG-3 EROG-4   Radius  5/32” 5/32”  1/4” 1/4”   Large  Diameter  1” 1”  1-3/8” 1-3/8”   Shank  Diameter  1/4” 1/2” 1/4” 1/2”   Carbide  Height  11/16” 11/16”  3/4” 3/4”   Florida Toll Free: 1-800-EVRLAST • New York Toll Free: 1-800-TCT SAWS   ROUTER CUTTERS     BALL BEARINGS   ARBORS INCLUDING NUT AND SPACER   Outside  Diameter  3/8” 1/2”  .865  1/4” 3/8” 1/2” 5/8” 5/8” 3/4” 3/4”  1-1/8”   Part Number EB-1 EB-2 EB-3 EB-4 EB-5 EB-6 EB-7 EB-8 EB-9 EB-10 EB-11   Inside  Diameter  1/8”  3/16”  5/16  1/8”  3/16”  1/4”  3/16”  1/4”  3/16”  1/4” 1/2”   Router Cutter  Tool Number  EFC-3/8”Diam.,ECHB,EROG,ECV  EFC-1/2”Diam.,Rabbet3/8”,ECR,  ETGA-1,EGS  EFC-1/4”Diam.  Rabbet7/16”  EFCUB1/2”Diam.  Rabbet5/16”  EFCUB5/8”Diam.,  Rabbet1/4”  EFCUB-3/4”Diam.,  EFCUB4 -1-1/8”Diam.  Part Number EA-1 EA-2 EA-3   Spindle  Diameter  5/16” 5/16” 5/16”   Shank  Diameter  1/4” 1/2” 1/2”   Shank  Length  1-5/16” 1-5/16”  1-1/2”   Router Cutter  Tool Number  EGS EGS  ETGA-1   Overall  Length  2-3/16”  2-3/8”  3”   BALL BEARINGS AND ARBORS   30   Also Available: Hex nuts, steel spacers, retaining collars, allen screws.   Florida Toll Free: 1-800-EVRLAST • New York Toll Free: 1-800-TCT SAWS     CARBIDE BORING BITS   CARBIDE BORING BITS     32  CARBIDE BORING BITS   BRAD POINT   Tool No.  BPD557L BPD557R BPD857L BPD857R   Cutting  Diameter  5mm 5mm 8mm 8mm   Overall  Length  57mm 57mm 57mm 57mm   Rotation  Left  Right  Left  Right   *W/Locking Flat. Short shanks available on request.   Designed for various machines such as Weeke & Morbedelli. Other sizes available - Quotation on request.   HINGE BORING BITS   Tool No.  Right Hand EHB35L EHB35R EHB40R   Cutting  Diameter  35mm 35mm 40mm   Overall  Length  57mm 57mm 57mm   Rotation  Left  Right Right   CARBIDE COUNTERBORE BIT (FACE FRAME) & REPLACEMENT DRILL   Tool No.  ECC-384 EFTD-18(DRILL)   Overall  Length  4-1/2”  2-13/16”   Shank  Diameter  3/8”  .136   Cutting  Diameter 3/8” .136   Florida Toll Free: 1-800-EVRLAST • New York Toll Free: 1-800-TCT SAWS   Shank  Diameter*  10mm 10mm 10mm 10mm   Hinge Boring Bits have 2 cutting teeth and 2 spurs.   Shank  Diameter*  10mm 10mm 10mm  *W/Locking Flat (will fit Weeke).     Consistently Superior Quality Guaranteed Consiste  ntly Superior Quality Guaranteed  Th  rough CNC Controlled Automation. Th  rough CNC Controlled Automation.     NEW YORK WAREHOUSE  16 Kopf Street, Brentwood, NY 11717  (800) TCT-SAWS • (631) 273-7655  Fax: (631) 273-8700   The Company Whose Name Says It All   Home Office and Plant in Naples, Florida.  HOME OFFICE & PLANT  Rail Head Industrial Park  1478 Rail Head Blvd., Naples, Fla. 34110  (800) EVRLAST • (239) 596-3333  Fax: (239) 596-9616   Cat. #809 www.everlastsaw.com